Flipper Zero - How to run Marauder on the WiFi Dev Board - ESP32 - Rick Roll

[@123adgie]

instlled latest rogue master firmware ,then followed ur video everything worked fine apart from i cant find the wifi option on my flipper zero,du you have a link to the firmware ur using please so i can try that as i dont get why its not working .thanks

[@midship904]

Man, you’re my hero 😄 I haven’t understood the differences and how to set this all up, now I’m fine, thank you!

[@rj8868]

i have installed marauder using multiple methods but my flipper does not identify the marauder, its as if nothing is attached. does anybody have any recommendations?

[@nickmoore3646]

Mate! You easily have the best videos on how to do things with the flipper I've found so far. All the others ive found are "Look at me! I have a flipper! Like and subscribe!" You actually explain and in clear detail. Please, keep these coming.

[@steamlabstech]

Glad to help!

[@Topronix]

definitly the best video on this tema thaks bro

[@steamlabstech]

Appreciate that

[@deletedaccount2027official]

helped alot, the others didnt say where to plug into!

[@0tez_]

wifi[marauder] isn't showing up for me, im using RM 0.90.1, and havent any access to anything named wifi (marauder)

[@G8YTZ]

Same here on 0.91

[@OfAHigherClass]

Same

[@Asznee45]

I couldn’t figure it out for the longest time. All I did was use the mobile app to download the marauder software onto the flipper. As long as you have the firmware downloaded to the dev board this should work

[@SulfuricDrop3]

I was having this issue wifi marauder wouldn’t even show up on the flipper phone app if my flipper was paired to my phone and would show up if I unpaired them if you install momentum firmware I got the wifi marauder files and can use it

[@jaredher114]

My deauthentication isn't working. I followed the steps, but its not kicking me off the network.

[@ok_140]

Ho, thanks you so much ! The only tutorial wich morked for me !!

[@h2o40fpv]

Great video thank you.😊

[@OneAndOnlyZekePolaris]

Mine's not keeping data on the pcaps for some reason.

[@devilghost]

Thanks for this vid! I would also note, if flashing and tool doesn't detect dev board it can be poor quality USB cable and to try different cable.

[@steamlabstech]

Good tip on the USB cable, I have had many people have great success with this video but then some who just can’t get it to work, USB cable is defo a good shout

[@klaytontucker7609]

@@steamlabstech I had this problem too, not matter what combo of holding down the button/how long, nothing worked. I ended up installing Arduino to see if I had better luck that way, when I tried to install it Windows firewall started trying to block an exe called dpinst_amd64.exe, once I allowed it past Windows, it started installing a bunch of drivers for USB connections. After I saw all the drivers load I connected the board and heard the distintc sound of the PC connecting to something, I ran the .bat and it worked perfectly, didn't even need to hold the button down. Just FYI if that means anything to you. Cheers! Thanks for the vid.

[@anthonypena8685]

i tried this on my wifi and it does not kick me off my wifi. not sure what im doing wrong.

[@adamdragoon]

I installed this following the instructions and now the flipper wont turn back on. Any suggestions?

[@astronominedo]

well job with this video finally i solved my issue buddy :)

[@steamlabstech]

Thank you

[@bobbe663]

Thanks for makng this guide. I cannot see the Wifi (Marauder) module on my Flipper, i also get a slighly different message after Flashing Marauder to the Devboard. I don't get the "File" entries - the last ones before "Process is completed" Message is "Staying in Bootloader." Any idea why that might be?

[@steamlabstech]

What firmware are you using?

[@Pvjnl]

same problem, i am using 0.88.0 on my flipper

[@steamlabstech]

When I flashed this I am running Rogue Master firmware, I haven’t tried using this with the standard flipper firmware. Let me know if you can get it to work with the firmware version you are using

[@c0untzer074]

@@steamlabstech I'm using Rogue Master as well.. the WiFi option isn't coming up on the menu.

[@XenoNostromo]

@@steamlabstechI followed every single step and the Wi-Fi option still isn’t showing up. Any ideas?

[@MysticEtch]

everytime i click on the zip file link, it leads me to a 404 page

[@steamlabstech]

Please look at previous comments, it’s been located to the top of the page

[@jakesalisbury1467]

i have flashed and followed same as video but when i go back on flpper i still dont get the wifi option

[@FulcrumMason]

me neither

[@atm_tk3]

same have you figured it out yet

[@KilianP-my3oe]

thank you so much

[@Sillynations]

Mine is just saying "A fatal error occurred: Failed to connect to ESP32-S2: No serial data received." any fixes?

[@royalscott3830]

same here did you figure it out?

[@beep-bopchawie6102]

same

[@lexusfixes9958]

Hold boot and reset at the same time then plug in wait 3 seconds let go of reset first and then boot and ur good to go. Run the flash again

[@user-qr2sw1dh2s]

whenever i try to flash i get a fatal error. then when i try running the software nothing works. what can i do?

[@PK88.]

Did you ever figure it out?

[@cfhlogistics]

Not a flipper problem actually. It's stupid windows driver. Download the vsp c++ drivers.

[@wayne72964]

i keep getting error

[@yenbceulemans1185]

Is there still benefit in flashing costum firmware even when there is a flipper appstore now

[@steamlabstech]

Absolutely, apps from flipper will always be restricted. I suspect Unleashed will release an updated version very soon. The best way to answer this is try the variations for yourself

[@humbertocastro151]

im getting this error " Failed to connect to ESP32-S2: No serial data received." and i dont have the app where you have it

[@lexusfixes9958]

Hold boot and reset at the same time then plug in wait 3 seconds let go of reset first and then boot and ur good to go. Run the flash again

[@gdviolence]

i love you@@lexusfixes9958

[@JosePerez-kt3xm]

@@lexusfixes9958 thank you

[@browalk4541]

I've flashed my devboard but the i dont get the wifi module on the device and whenever i boot my FZ i get the combination of blue, green, red light on the devboard. Other than that the light doesnt get lit up, do you have any idea why that happens?

[@steamlabstech]

Are you sure it is plugged in properly to the GPIO pins? I doubt it is the firmware you are running, out of interest, what firmware are you using with the WiFi Dev?

[@browalk4541]

roguemaster is the one i'm currently using :)@@steamlabstech

[@steamlabstech]

I just completed the same process again and this method still works. I would try again to see if you missed any steps, it is strange that these same steps wouldn't work for you

[@Outcaste153]

You can add the duel boot file and flash from flipper. I was having issues with the newer firmwares and that worked for me on unleashed.

[@jacobmck4312]

I keep getting 1 2 3 4 5 … why am I getting 5 instead of 4 ?

[@steamlabstech]

Could be an update in the firmware since I posted I will check

[@ctoxyz]

#fun && #funny

[@Pastachios]

It doesn’t give me the 1 2 3 4 thing when I run the flash

[@steamlabstech]

You have to make sure that you powered on the Wi-Fi board when connecting it to the computer, otherwise the options won’t appear. Have a look at what I do and what I mentioned in order to get this to work. I hope that helps

[@Pastachios]

@@steamlabstech I got it thank you but when I scan to try to deauth a network my Wi-Fi doesn’t show up or the ones I can connect to

[@steamlabstech]

I think you need to leave it scanning for longer, do try to check that the wifi board is plugged in properly

[@jacobmck4312]

I’m getting 1 2 3 4 5 …. Why 5

[@elijahmashter9587]

I like ethical hacking

[@UfukKay]

Can’t find the zip :(

[@steamlabstech]

It’s been relocated to the top of the page

[@destinycalled]

the zip file is no longer downloadable...

[@steamlabstech]

They have now moved the zip file to the top do the page, you will be able to see it was updated 2 days ago