Installing Inner Tubes On Your Riding Mower Tires.

  Рет қаралды 354,978

Farpoint Farms

Farpoint Farms

6 жыл бұрын

Here is a video that I made showing how to break down your riding mower tires and then install inner tubes.
I am sorry for the wind in the opening segment, and also sorry for the video jumping around a bit. It turns out my camera wasn't recording for the vast majority of the job so I had to creatively cut and splice the remainder to get the job done.
Know this. THIS JOB SUCKS.
I did all 4 tires on this mower, and each presented its own challenges. Time and determination is what is required to get it done!

Пікірлер: 431
@sherrylusk3744
@sherrylusk3744 6 жыл бұрын
Because of you, I was able to fix the tire on my riding lawnmower. I had hired one guy and asked another to fix my tire. Neither succeeded. They used some kind of green goop, which didn't work. Anyway, I watched your video and accomplished it myself. Single mom here and I surprised myself! Thanks so much! :)
@FarpointFarms
@FarpointFarms 6 жыл бұрын
I'm so glad to hear I could help, and good for you! Too many people don't even bother to try.
@axtra92
@axtra92 6 жыл бұрын
Sherry Lusk who cares if you are a singel mom?
@danielholtxxl4936
@danielholtxxl4936 5 жыл бұрын
Who cares if you don't care that she's a single mom? Get a life. And then go back to school and learn how to spell.
@cindyrittenberry9405
@cindyrittenberry9405 5 жыл бұрын
@@axtra92 I care! Why do you care that she mentions it. Saying she's a single mom lets everyone know that she is doing this on her own without a man's help. Men generally have more upper body strength and typically this type of job falls in their area of expertise and not a woman's. Bravo to Sherry Lusk!
@henryraymond8676
@henryraymond8676 4 жыл бұрын
Yes, you have my approval, not that U need it. But I get so frustrated anymore that many repair people either want to charge people an arm and a leg, don't know what they they are doing, or think that repairs come in a can. I mean what was so hard about this right? You take the friggin' tire off part way and put a tube in, blow it up. HELLO! Back in my time, the 60's and 70's, we did this stuff all the time. I worked at a filling station and we repaired tires with patches, bicycle tires, and ACTUALLY fixed stuff on your car. We didn't replace the alternator we rebuilt it. Now it's a lost art and it will take until next week to fix. We did it that day, in an hour.
@Robsbrd99
@Robsbrd99 5 жыл бұрын
You just proved to me that the 20 bucks I spent to have my new fronts installed was well worth it. I just dont have the patience anymore. You did a great job.
@FarpointFarms
@FarpointFarms 5 жыл бұрын
Ha! Seriously it's a pain in the butt and not for everyone. If I had the money, I'd pay someone else too.
@elliesteele2342
@elliesteele2342 3 жыл бұрын
Thanks so much for this video! It was exactly what I needed. I was able to change my tube in less than 20 minutes because of your help. I'm especially grateful that you prepared me for it being a crappy task, so I didn't get discouraged when it was a little frustrating.
@ronaldvaughn168
@ronaldvaughn168 Жыл бұрын
I hope you watched more than one video, this guy got it done, but he wore me out watching him. LOL
@midwill13
@midwill13 4 жыл бұрын
Well from years of tearing apart my bikes as a kid has taught me to put the cap on the inner tube before trying to put the tire back on the rim. It helps keep the tube in place.
@chadfield376
@chadfield376 Жыл бұрын
Yep, that’s the only mistake I saw on this video myself. The other peace of mind tip I do (from the bicycle tire days) is fully inflate tire with valve core removed to set inner tube, let the air all flood out and then check the bead to make sure tube is not pinched between rim and tire bead on both sides. Once I know tube is fully set, then I air up to set bead followed by proper tire pressure :-)
@CHEDDER_MEOW65
@CHEDDER_MEOW65 11 ай бұрын
The hole one these wheels are bigger than the hole on bike rims. These have a bigger hole for the tubeless valve stem so it wouldn’t work
@donmoore7785
@donmoore7785 2 ай бұрын
I learned that lesson from watching this video.
@byronw.johnson4426
@byronw.johnson4426 5 жыл бұрын
Thanks for your video because it's not only helpful, you struggle with the tire like I did and make it real - I wasn't alone seeing your effort. I found a way to get that tire over the rim using my right knee at 6 o'clock and two equal length flat head drivers at 2 and 10 o'clock or there abouts (3rds for leverage) - use the rim with the flat end of the driver under the tire, knee compressing the tire at 6, push the drivers working the tire over the rim (soap use helps, keep a spray bottle close), keep working the drivers around - and shebang! The garage floor was perfect - I never wrestled with s tire before and watched you and appreciate your advise.
@FarpointFarms
@FarpointFarms 5 жыл бұрын
Glad I could help, and thanks for the tips!
@joeytroutman9506
@joeytroutman9506 2 жыл бұрын
I have changed four or five motorcycle tires by hand 20 yes ago. I even have the proper tire tools but my goodness the rear tire of my lawn mower has been very freaking difficult. I finally got it. I watch this video just to make sure I remembered how to do it lol Thank you for the video
@beerrunlkl7774
@beerrunlkl7774 2 жыл бұрын
Local tire shops refused to help me, then I watched your video.....so simple, just be patient and it worked! Back up and mowing again, great video, thanks!
@FarpointFarms
@FarpointFarms 2 жыл бұрын
I am sorry that they would not even help you, I am gad that you were able to do it yourself. That is one of the reasons that I make these videos- Most people can do this kind of stuff with the right guidance.
@timmcginn6903
@timmcginn6903 3 жыл бұрын
Your video got me through the tough stuff. The big deal for me was getting that rim all the way on. Once I saw you do it, it was easy, thanks.
@rdharris802
@rdharris802 3 жыл бұрын
I had to patch the tube in my garden tractor. After patching the tube the tire was fighting me going back on the rim. I came inside and a search brought me to your video for help. I learned two things... I needed to use better lube around the rim (used a little Fluid Film) and learned I was not holding my tongue right (needed to use your technique). I went back out and within 5 minutes had the tire back on the tractor. THANKS for posting. Nice job making the video :)
@virginia7125
@virginia7125 2 жыл бұрын
Tire irons, especially long ones will pinch the inner tube about every time. AutoZone sells these stubby ones for around $12. On the back tires, the spoons are further away from catching the tube, this the long ones will work on those. Wheel barrow tires are so narrow, you also can only use screwdrivers.
@nathan7538
@nathan7538 6 жыл бұрын
Your video was awesome!! Thanks for the help. I used pry bars, but I had to keep going back to my screw drivers. Lol. I Also used a washer to keep the stem from falling in. Thanks again!
@LongNguyen-nc8dr
@LongNguyen-nc8dr Жыл бұрын
Thank you for your sharing the video. I could not have my tire fixed without watching it. God blessed 🙏
@frankvandoorn
@frankvandoorn 2 жыл бұрын
Thanks! A thousand times over. Best dyi vid I’ve seen. Now to go wrestle with my two front tires.
@herrcobblermachen
@herrcobblermachen 3 жыл бұрын
I am so happy that you are as frustrated as I am and that this whole endeavor isnt sugar coated or unreasonably optimistic.
@Turbo231
@Turbo231 4 жыл бұрын
Your video made me feel better. Doing this task myself only to find at the end I must have punctured the tube if fairly frustrating. Glad it’s not easy and I’m just doing it wrong.
@raybrown1954
@raybrown1954 Ай бұрын
Erik, great commentary on the small tire service. I feel your pain. I have found the small tire service tool kit useful and worth the price of frustration. Well done. Carry on.
@FarpointFarms
@FarpointFarms Ай бұрын
Thanks- These things can be a pain- I am glad they don't go bad too often
@ironman23gt
@ironman23gt 3 жыл бұрын
Nice work. Just found your channel and so far so good! All of that squeaking from the rubber gloves though gave me flashbacks to prom night!
@mrsexy69able
@mrsexy69able 3 жыл бұрын
Thanks for the video. Was just about to give up and then I found this videos. Patients is key
@joshob988
@joshob988 4 жыл бұрын
Appreciate your time to show us this. Was able to save $ by doing it myself.
@jennisonb37
@jennisonb37 3 жыл бұрын
This was quite helpful and I was able to get the job done myself. Thank you!
@lawrenceklein4918
@lawrenceklein4918 4 жыл бұрын
Just installed inner tubes on both rear wheels on my MTD Lawn-Boy riding mower. Wheels are press-fit onto the axle and do NOT come off unless using an oxy-acetylene torch, various clamps and pullers, and a whole lot of cuss words! I removed both tires from the wheels, wire-wheeled the rust off of the rims, spray painted them to help prevent more rust, (Fix-a-flat and Slime will both cause rust to form!) re-installed tires using the three screwdriver method; back-side first. Inserted and positioned tube, using needle-nose Vice-Grips, carefully, to hold valve stem in place. Pump-spray bottle with soapy water helps facilitate mounting the tire to the rim(wheel). All performed while each wheel remained on the axle! Easy-Peasy!
@josephpapp7388
@josephpapp7388 3 жыл бұрын
Perfect. I did mine along with this video and it worked. Great Job!
@michaellahood6157
@michaellahood6157 9 ай бұрын
I really liked that you didn’t edit most of the video - that gave a realistic idea of what I was going to be up against. Thanks.
@FarpointFarms
@FarpointFarms 9 ай бұрын
Any time!
@tomlewis3658
@tomlewis3658 6 жыл бұрын
Thanks. One of my warm weather to-do items is to do this to the tires on my snow blower. I had to plug 1 of them a few years ago, due to a nail in the tread area. They don't leak, but I never liked the idea of tubeless tires on equipment like this, ever since I had a full load in a wheelbarrow, and needed to do a 180 degree turn, and the tire pressure was low, and broke the bead while turning. The snow blower and tires are 10 years old, but since it is almost never in the sun, they are not dry & cracked.
@FarpointFarms
@FarpointFarms 6 жыл бұрын
Good luck! As you can see from this video, its just time, patience and some brute force.
@Appalachian97
@Appalachian97 4 жыл бұрын
Thank you so much for this video! It’s a pain for sure but I got it done thanks to you!
@scotto6120
@scotto6120 5 жыл бұрын
Good video! Just finished replacing a 4.10/3.50-4 tire and tube. Took me about an hour wrestling with it trying to figure things out. I used a vice to clamp down on bearing hub to stabilize it. For tire irons I put cut off plastic tubing on tips of large screw drivers so not to pinch the pinch while installing. Also used an adjustable clamp to squeeze down on tire. Everything about repairing a 4” tire and tube seems like 10X harder than bigger tires.
@garoglen
@garoglen 5 жыл бұрын
Yep !
@haveaheartdontfart.8515
@haveaheartdontfart.8515 4 жыл бұрын
Thanks for posting this man. Helped me out big time. One pointer is to put a small piece of duck tape around the value stem to prevent it from going down in the tire.
@FarpointFarms
@FarpointFarms 4 жыл бұрын
Great idea!
@thomaswisniewski5380
@thomaswisniewski5380 5 жыл бұрын
WAS IN THE SMALL ENGINE BUSINESS FOR OVER 20 YEARS. THANK YOU FOR DEMONSTRATING USIING A TUBE KILLER, (SCREWDRIVER) WHEN INSTALLING A NEW TUBE. MADE ENOUGH OFF PEOPLE LIKE YOU TO BUY A NEW VEHILE OVER THE COURSE OR A CAREER.
@FarpointFarms
@FarpointFarms 5 жыл бұрын
I popped a few tubes when I was young! We live and we learn.
@jcsosa9167
@jcsosa9167 5 жыл бұрын
Honestly I gave up for a second and then I found this video and I did it thank you man
@wruss64
@wruss64 6 жыл бұрын
Thanks for the video. Real world "grab, tug and cus", gives a great overview of "how to"
@transformer889
@transformer889 5 жыл бұрын
I bought a HF mini tire changer, that helped a lot. Thanks for the video
@FarpointFarms
@FarpointFarms 5 жыл бұрын
I've been looking to get one of those myself.
@sambrandt4755
@sambrandt4755 3 жыл бұрын
I always broke the bead by setting a 2x6 on the side and driving a truck up on it. Works well especially on the larger rear tires. This guy makes it all look easy with hand tools
@virginia7125
@virginia7125 2 жыл бұрын
I was scared he was gonna gouge his rims or cut slots in the tire beads. Not the tool of choice in my opinion.
@jb-zr4ez
@jb-zr4ez 3 жыл бұрын
Thank you for the demonstration. Really helpful.
@juandavila3535
@juandavila3535 3 жыл бұрын
Good realistic video, i like the fact that you had some issues with the process, awesome video.
@FarpointFarms
@FarpointFarms 3 жыл бұрын
It sure is a bear, but it can be done!
@jimjordan5630
@jimjordan5630 5 жыл бұрын
Once the tube is inside the tire clamp on your locking air hose chuck. Give it just a tiny bit of air to help take the wrinkles out and then leave the chuck clamped on. That will keep the tube from slipping back in without impeding on your work area. When tire is back on rim your set to air up.
@georghausherr3210
@georghausherr3210 Жыл бұрын
Thanks for showing howyou did this job. I am living in Central France - nearly the other side of the world - but the problems are the same.
@robertturner1575
@robertturner1575 Жыл бұрын
Thank you for the video! It was very helpful as to how to break the tire bead away from the tire rim. The rims I am working on are apparently made of soft metal. As I was using a hammer and large flat tip screw driver to loosen the tire, I gouged some of the inside of the rim, creating some sharp inner tube puncturing points. No huge problem, I smoothed them down with a Dremel tool. Just something to inspect for after you break down the tire. Thanks again.
@FarpointFarms
@FarpointFarms Жыл бұрын
Glad it helped and that you were able to fix the rims.
@davidwatlington2816
@davidwatlington2816 4 жыл бұрын
Awesome video, gonna replace the tubes on a go kart tomorrow. I think I’m going to use vice grips to hold my stem though so it doesn’t slip back through the hole. Thanks!
@bleepbleep1961
@bleepbleep1961 Жыл бұрын
a washer with the cap is a better and safer idea !!
@henryraymond8676
@henryraymond8676 4 жыл бұрын
Good job and thx. I wasn't to sure this would work for a tractor tire, rather than replacing the whole "tubeless" tire. But you've shown that it does so kudos. I might wash the tire with a hose to make it a lit easier to remove and cleaner. Also, a little oil dropped on the rim area if the tire needs to be pried off might help. WD 40 works well to when stuff is "welded" on metal. One question - Do you have to unbead one side of the tire to put the tube in? We used to always just deflate the tire on bicycles to do this and then "work" the tube in.
@loveloveiloveuforever7247
@loveloveiloveuforever7247 2 жыл бұрын
Great product!!! Would buy again.
@craiggregory4712
@craiggregory4712 3 жыл бұрын
Thanks. I did exactly and it worked. Great video!
@timbyers4742
@timbyers4742 5 жыл бұрын
Thanks for the video. I had the tire and tube off in about 10-15 minutes. I couldn’t get the front bead to release so I just broke the rear side and pulled the tube out that way. Also, there was a washer on the rear side of the tire. Thanks again for the video,
@larrymbs
@larrymbs 2 ай бұрын
If you can't see this, that's ok,i can't see it either!😁👍 This is the most honest do it yourself unscripted how to video i have ever seen.... Made me 😆also Thank you,and you covered every single bit of that procedure. Start to finish with all the problems in between 👍
@FarpointFarms
@FarpointFarms 2 ай бұрын
Thanks for that, no surprises on this one.
@josephwalter662
@josephwalter662 4 жыл бұрын
I clamp a pair of vice grips to the valve stem as soon and I have it through the rim from the begining so it doesn't fall through. But this is a great video and is how I've been doing for years. Always a fight for me and a few names called to the tire!!
@lesconnally9428
@lesconnally9428 2 ай бұрын
THANK YOU for being honest on just how horrible a job this is. Smaller the tire the worse it is. 😱
@FarpointFarms
@FarpointFarms 2 ай бұрын
Glad I could help- no creative editing on this one
@danielhulitt1212
@danielhulitt1212 4 жыл бұрын
Useful video. The cracked sidewalls (they get a lot of sun on them?) was a good call. If one needs to check for a reason, some water over the tread after filling with air or a dump in a pan will help. How about the use of warm soapy water around the rim to help with removal and installation. Thanks.
@matthickey7752
@matthickey7752 4 жыл бұрын
This was a great aid to me when it came time to put the tire back on. I got my assistant (my wife) to stand on the tire to mash it down. Some work with the screw drivers and success!!! The key was having somebody mash down the rire while I worked the screw drivers.
@FarpointFarms
@FarpointFarms 4 жыл бұрын
A second set of hands always help!
@marileesteele1804
@marileesteele1804 5 жыл бұрын
Washers on valve stem (where tubes seem to easily suffer damage), can you put rubber grommet washers on both sides, i.e., inside (before stuffing tube in rim) and outside on stem? Having washer inside, will that affect performance of tube? Good advice to oil tube, no? I want to do this as seldom as possible!!!!
@chrisscott541
@chrisscott541 5 жыл бұрын
that was a lot of help man thanks!
@donschwartz1158
@donschwartz1158 3 жыл бұрын
Excellent video. I almost gave up on a 15x6x6 tube install. Thanks for the real.
@FarpointFarms
@FarpointFarms 3 жыл бұрын
Glad it helped
@acreguy3156
@acreguy3156 11 ай бұрын
Before re-seating the tire, put a washer on the valve stem and then the cap. It keeps the valve stem from dropping. I did this same repair just yesterday and it's a real pig of a job getting the bead re-seated. In your case, I would have replaced the tire too. Mine was more flexible and it was hot and humid in the garage. Bad for the body but great for making the rubber flex better. I still needed a boat load of soap and strength!
@FarpointFarms
@FarpointFarms 11 ай бұрын
Good idea! Thanks.
@doughurst4311
@doughurst4311 4 жыл бұрын
Sometimes you need more slack to get the inner tube over the wheel and placing the stem in the hole reduces the slack. Try tying a constrictor knot over the stem with a piece of twine. Thread the loose end of the twine through the hole. Once the inner tube is on, use the twine to guide the stem through the hole.
@jeffdossin2476
@jeffdossin2476 5 жыл бұрын
this was a huge help, thank you
@FarpointFarms
@FarpointFarms 4 жыл бұрын
Glad I could help!
@graemer66
@graemer66 2 жыл бұрын
Just changed both rear tyres and tube’s on my Australian made Greenfield ride on with the assistance of my wife. Had to be careful not to swear too much as wife would have walked off. Anyway had been planning this job for the last year and did a lot of research. Tools used was some tyre levers from my inheritance (thanks Dad RIP) valve extractor, 8 inch G Clamp and soapy water, plus ratchet strap. All work done with wheel still on mower, much more difficult as wheel would not come off due to shaft being tapered and some electrolysis between Aluminium rims and Steel shaft. First deflate tyre, remove valve,then used G Clamp across old rubber tyre screw in to brake beed, slowly used levers to remove first side of tyre then remove tube. Next I removed tyre with great difficulty without damaging rim with levers. To install new tyre do the reverse but once tyre and tube is on I used ratchet strap around new tyre tightening slightly to help get the bead to seat, use soapy water on both side of the rim and slowly inflate tyre. This should make the tyre bead correctly but it might need you to gently hit tyre around the middle a number of times to assist it to pop into position. I then slightly deflate tube then remove ratchet strap, then I inflate to make sure tube was not twisted inside Tyre, not sure if this is necessary but just something I do. Graeme in OZ
@hollyhopnoodle
@hollyhopnoodle 4 жыл бұрын
Thanks for the video. Made for quick work.
@rcnelson
@rcnelson 4 жыл бұрын
I just finished wrestling with putting an inner tube in my big mower's tire and thought I could use some advice. One thing I did was feed the tube stem through the wheel's hole first, capped it, and then packed the tube into the tire.
@matthewsalvador9783
@matthewsalvador9783 4 жыл бұрын
Thank you very much I didn’t want to buy the tool... it took a bit longer due the inner tube coming with a hole. I used vice grips to hold the plug thing. I was hesitant on using 16 bigger inner tube on a 15 but it worked great. Thank you very much
@FarpointFarms
@FarpointFarms 4 жыл бұрын
Glad it helped
@gregorypiercesr.2769
@gregorypiercesr.2769 Жыл бұрын
Great video! I'm doing one today!👍👍😎
@ChikinTown
@ChikinTown 5 жыл бұрын
Good vid, I have used a small pair of vice grips to hold that damn fill valve in place so it doesn't pop back inside.
@FarpointFarms
@FarpointFarms 5 жыл бұрын
I'll try it the next time i do one.
@sheenalynne1987
@sheenalynne1987 4 жыл бұрын
I have no clue what I'm doing haha but you made this look do-able so I'm guna try to attempt this before the boyfriend gets home from work lol thanks for making time to make this video for us who don't know what they're doing! 🙌😂👍
@FarpointFarms
@FarpointFarms 4 жыл бұрын
You can do it!
@jimhamilton850
@jimhamilton850 7 ай бұрын
Thank you . There was 2 or 3 tips to help the steps that I didn’t know.
@FarpointFarms
@FarpointFarms 7 ай бұрын
glad I could help
@survivorjohnny44
@survivorjohnny44 4 жыл бұрын
After watching you wrestling that alligator I think I might take that guy at the tire place up on his offer to install it for $20. I gotta give it a go before I do just so when I'm done I'll have the satisfaction of knowing I beat it. Thanks for posting this
@p3t3rchris
@p3t3rchris 2 жыл бұрын
Thank you! Very helpful.
@rustymertz
@rustymertz 4 жыл бұрын
Congratulations on accomplishing this without swearing.
@tigerseye73
@tigerseye73 3 жыл бұрын
I partially screw a 1/2-13 nut on the rubber portion of the new valve stem, ( once I finally snag it tru the hole ). It holds the stem in place while wrestling with the tire carcass
@mrzoinky5999
@mrzoinky5999 10 ай бұрын
I appreciate your effort - I've done it the same way for years - but I need to find a video that makes it easier☺
@FarpointFarms
@FarpointFarms 10 ай бұрын
There really is not an easier way- they can be tricky
@howieloso
@howieloso 3 жыл бұрын
how about powdering or Vaseline exterior of tube so that it slide easier in tire?
@BigAlWillis
@BigAlWillis 3 жыл бұрын
just did this today with the rear 18'' tires. tubes at Harbor Freight for $10 bucks wasn't that bad of a job at all, only thing is have yourself some needle nose vice grips because the valve stem wants to fall back into the rim. Think I'm going to get an oversize cap so it doesn't fall completely into the rim needing to remove the tire again. helpful video, thumbs up
@jimmysgarage9068
@jimmysgarage9068 4 жыл бұрын
Perhaps a pair of locking pliers could help hold the new stem in place while you get the tire back onto the rim. Great video my man! I'm sure this has helped a lot of people.
@FarpointFarms
@FarpointFarms 4 жыл бұрын
Good tip!
@TerrapinCreations666
@TerrapinCreations666 5 жыл бұрын
Once you got the fill valve through the hole, it helps a lot to then partially inflate the inner tube. That keeps the valve from falling back through so easily.
@johnoshman7635
@johnoshman7635 5 жыл бұрын
Once I get the valve through the rim, I screw a valve stem tool on to keep it from pulling back through. It's only a couple $$ and worth their weight in gold!!!
@TerrapinCreations666
@TerrapinCreations666 5 жыл бұрын
I’m just saying if you don’t have one of those and don’t want to make another trip to the store, lol
@11swampy
@11swampy 4 жыл бұрын
@@TerrapinCreations666 I just put the valve stem cap on. It will not fit thru the hole, so the nozzle stays in place. Remove it when done to fill tube, then replace. No extra tools required.
@TerrapinCreations666
@TerrapinCreations666 4 жыл бұрын
Denis Gregg Oh ok. The caps I’ve had go right through the hole easily.
@11swampy
@11swampy 4 жыл бұрын
@@TerrapinCreations666 I just ran into that yesterday. Some rims have bigger holes than others. On those I use a flat washer under the cap (as long as you have the right size hole in a washer).
@kalbs89
@kalbs89 5 жыл бұрын
Super helpful, thanks
@JoaquinChea
@JoaquinChea 5 жыл бұрын
I use a washer over the valve stem to keep it from falling back inside the rim. Good video thanks.
@wesseavey
@wesseavey 4 жыл бұрын
I was thinking to put the air compressor connector on, ...if you don't have a big washer handy
@raywinburn8445
@raywinburn8445 4 жыл бұрын
yes, i 1st saw this video, i thought to do the same thing, and then i saw you comment, so i said great.
@lillianpolli3827
@lillianpolli3827 4 жыл бұрын
Mi on
@jeffpomeroy5070
@jeffpomeroy5070 4 жыл бұрын
Go get a 3/8 inch concrete anchor 5 inch long. Along with some washer and a nut. Clamp the anchor to a vise. Will hold rim while doing it. Also HF tire irons work well for this task... .
@ffas23
@ffas23 5 жыл бұрын
I have a 20 year old MTD Yardman Lawn Tractor. Was having problems with the front tires always being flat when I went to use the Lawn Tractor. Took the wheels off and filled them with air and put them in a dunk tank filled with water. I never could find the leak. I got tired of the problem so I thought why not try a bottle of Green "SLIME" Tire sealant. Well let me tell you the product was worth the try. I never have a problem with those Front Tires anymore and it has been years. Very seldom do I need to ever add air to them unlike before. My advice try the SLIME first before even thinking of putting tire tubes inside the wheels. Also let me add. Next time you do this type of job get yourself a used empty spray bottle and add some dish detergent and water to the bottle. Spray it around the rim and it will help you get that tire off. Let me also mention that Harbor Freight sells a inexpensive mini tire changer that may be worth having if you ever need one. I own one and it is well worth having for wheel barrow,lawn tractor and quad tires. There is always a HF 20% coupon available to use to lower the price. Beats trying to do it the way shown above. Trust me I have done them that way also. Its not for everyone. It could be a real struggle.
@FarpointFarms
@FarpointFarms 5 жыл бұрын
Great advise! Yes!! Use slime first as it does cure a lot of these issues. When the tires finally develop cracks, it's time for tubes.
@ffas23
@ffas23 5 жыл бұрын
Farpoint Farms Yes I agree your tires were beyond Slime helping. I am guessing you must leave your tractor outdoors for your tires to have dry rotted so badly. Then I look at your video of your tractor and it looks to be in great shape like if left indoors. I don’t get it because as I mentioned my tractor is 20 years old with the original tires on it and I see no signs of dry rotting. My wheel barrow is always outside in the elements and that tire is dry rotted but believe it or not I have Slime inside of it and it is holding up. lol.
@seanwetrich8299
@seanwetrich8299 4 жыл бұрын
I spent the 40 dollars or so and bought a mini tire changer from Harbor Freight. I've already used it to replace Six tires. For me, that makes it more than worth it for the time saved.
@gloryrow100
@gloryrow100 2 жыл бұрын
what was the red stuff on the tire around the bead?
@phillipparten4697
@phillipparten4697 4 жыл бұрын
I have a REALLY nifty tool that I use when installing tubes in tire rims ; it's called a valve stem repair tool , available at Auto parts stores everywhere. All you gotta do is screw the threaded end over the valve stem , after you get it inserted trough the rim , and the stem will not pull back through .
@iceetmarne3571
@iceetmarne3571 3 жыл бұрын
wrap tape around it a few times and that will hold
@knottreel
@knottreel 5 жыл бұрын
Thanks much. I was trying to insert the tube without popping out one side of the tire.
@FarpointFarms
@FarpointFarms 5 жыл бұрын
Glad I could help!
@virginia7125
@virginia7125 2 жыл бұрын
I always used a blunt pole to break my tire beads. Screwdrivers can gouge the rim causing it to leak if you ever go back tubeless.
@donmoore7785
@donmoore7785 2 ай бұрын
This was very helpful. Thanks. Superior to buying a cheezy imported replacement tire/wheel that will fail in a year.
@FarpointFarms
@FarpointFarms 2 ай бұрын
Glad it helped!
@Gersberms
@Gersberms 5 жыл бұрын
Screwdriver and hammer didn't work for me, so I used two large glue clamps to squeeze the tire to the middle of the rim. That worked great once I figured out to squeeze the thread of the tire toward the rim.
@johnharrison7624
@johnharrison7624 Жыл бұрын
I found to save the chance of the valve slipping in i always screw the dust cap on the valve just till im sure all is ok. Cheers. John.
@FarpointFarms
@FarpointFarms Жыл бұрын
that is a good tip-
@huntersmyers9906
@huntersmyers9906 5 жыл бұрын
Using two hammers u can use the claw end on one to break the bead and use the other to hit it down on the bead of the tire better than a screw driver so u don’t have the chance to put a hole in the tire
@homesteadspirit9209
@homesteadspirit9209 6 жыл бұрын
You are a much more patient man than I. When I do this there is usually lots of vicious swearing lol
@FarpointFarms
@FarpointFarms 6 жыл бұрын
Man, I HATE THIS JOB!!! I was so pissed by the time I got all 4 tubes installed. My blood pressure was through the roof! Thank god its over for now anyway. I have seriously been putting that job off for almost the entire summer. The poor LT3000 has just been sitting there with a tire off its bead in the driveway since late April. The good news was that once I had it all back together I put a jump box on it and she fired right up. I took it on a short ride around the property and parked her back in the garage for a clean and lube. I think I'm going to sell this one in the spring as I use the GT52 for my cutting now.
@homesteadspirit9209
@homesteadspirit9209 6 жыл бұрын
Farpoint Farms oh man me too....I hate it lol. Its a shit storm to do a tire on a full sized farm tractor..btw what happend to the ag tires on the Craftsman?
@FarpointFarms
@FarpointFarms 6 жыл бұрын
I have decided to sell the Craftsman YT3000. I have had it for about 5 years now, and decided it was time to move on from it. So I put back on the old stock tires and took off the wheel weights as part of getting it ready to sell next spring. I've been thinking about selling it and my LT1000 "brush cutter" and maybe fixing up the deck that came with my GT6000 to use next year so I can used it for those duties. I have also been considering maybe taking the plunge next spring on a Kubota BX25 . Its a HUGE investment, and I'm more than a little worried about spending that kind of $$ on a tractor, but I sure could have used that backhoe a few times this year.
@homesteadspirit9209
@homesteadspirit9209 6 жыл бұрын
Farpoint Farms I completely understand becuse If I didnt also have my farm tractors I would need to get somthing lime that. What do you think you will sell them for if I may ask...
@FarpointFarms
@FarpointFarms 6 жыл бұрын
I'm not totally sure. I think the red 2013 YT3000 is still a good tractor, but Its got maybe 300 hours on it now and its showing some signs of age. I take good care of my stuff, but this property is pretty hard on equipment. I think I'll ask $450 or so, and see where it goes. The old "brush cutter" 2001 LT1000 is already spoken for. A co-worker of mine wants it for his small yard and I told him he could have it for $250.00 If I decide to get a BX, well.... I would probably have to sell my Husqvarna GT52xlsi and I would take a beating on that one. I have about $4000.00 in it with the sleeve hitch (+ upgraded hitch), the AG tires, chains and weights. I'd be lucky to get $2500.00 for it, but It may have to happen to help pay for the BX. That would still leave me the pretty cool GT6000 I picked up last spring. Its Stout and I'f I fix up the deck I could still cut with it. Decisions decisions....
@bericwitt
@bericwitt Жыл бұрын
Ya did it! Good job and patience. Yep, definitely not a crowd pleaser but hey, a little elbow grease goes a long way! Many thanks.
@FarpointFarms
@FarpointFarms Жыл бұрын
Just had to do one today. What A hassle!
@eeandersen
@eeandersen 4 жыл бұрын
What was that magic red fluid that appears on the tire bead at about 10:30?
@FarpointFarms
@FarpointFarms 4 жыл бұрын
That is actually generic "Green Slime" in this case red slime that was all over the inside of the tire from when I filled it to stop a small leak. What a mess that stuff is!
@sjohnhance
@sjohnhance 20 күн бұрын
Tip: after you have the stem valve through the hole, place a washer over the stem and screw on the cap to hold the washer on. The stem will now not be able to slip back out of the hole.
@FarpointFarms
@FarpointFarms 20 күн бұрын
That is a great tip, thanks for sharing
@kevinsimmons8774
@kevinsimmons8774 Жыл бұрын
Good video. Comparing techniques. The only thing I do is screw a valve stem remover on to keep the stem in p!ace while I reseat the tire. .
@rogermurph101
@rogermurph101 6 жыл бұрын
When I do this, I insert the valve stem first, then work the tube around the rim. Once that's done, I air up the inner tube just enough to hold it in place and that will keep the valve stem from slipping out of the hole. Just be careful working the tire back onto the rim.
@transformer889
@transformer889 5 жыл бұрын
Great tip
@mikevilanova1619
@mikevilanova1619 5 жыл бұрын
I was thinking same thing why couldnt uyou insert the value stem first then work tube in
@TripleB101
@TripleB101 2 жыл бұрын
If the tire is off the bead on both sides ..I’m wondering why you have to get one side off the rim ? Can’t you just slip the tube around the rim into the tire ? Then just pump it up ?
@cancelhandles
@cancelhandles 3 жыл бұрын
Thanks for leaving it in when you dropped the screwdriver, gave me a good laugh. I knew exactly how you felt.
@FarpointFarms
@FarpointFarms 3 жыл бұрын
Glad you enjoyed it! The job is hard, and I didn't want to lie to anyone about it.
@Thumper7818
@Thumper7818 6 жыл бұрын
I stopped working on the front tire innertibe change out to see if I could find a KZbin video on the subject. I thought I was doing it wrong maybe, but just like your project, what a pain in the ass. One thing, I kept losing the tube stem while trying to set the bead, so I screwed on the tool that comes with a good patch kit, the stem core remover with the thread straightener.
@MyFREEFrugalHomestead
@MyFREEFrugalHomestead 6 жыл бұрын
Add a washer over valve steam and a nut to threaded steam it will keep it from pulling back out as you replace tire.....My new old tractor has held air......for now. I am thinking of getting agg tires for the rear, hoped you would come over to install them....no ?
@FarpointFarms
@FarpointFarms 6 жыл бұрын
Hey, thanks for the valve stem trick! thats a great idea and I've never heard of it before. Those Ag tires will make you SS-16 a BEAST! as for me putting them on. I think 3500 miles from coast to coast may be a bit far for a house call...
@MyFREEFrugalHomestead
@MyFREEFrugalHomestead 6 жыл бұрын
I can FedEx them to you, I just need your account number to save me the shipping cost. Thanks
@nathan7538
@nathan7538 6 жыл бұрын
My FREE Frugal Homestead I just finished putting a tube in my small front tire. Tomorrow is the back big tire. I did the same thing by adding a washer to keep it from falling in. But your video helped me out a lot! Thank you!!
@MyFREEFrugalHomestead
@MyFREEFrugalHomestead 6 жыл бұрын
Love to take Credit but this video is Erik's video, he did all the hard work, I just said the washed and a nut may help hold the stem in the rim.
@sandihandi7831
@sandihandi7831 2 жыл бұрын
QUESTION; Where did the old tube go? Did you leave it inside as I didn't see you take it out.
@FarpointFarms
@FarpointFarms 2 жыл бұрын
That one did not have inner tube in it- most do not and as they get older they leak and don't hold air anymore. I added the tube because that is the problem that I was having
@TheRackits
@TheRackits 5 жыл бұрын
What size tube do you use?
@michaellongwell1817
@michaellongwell1817 4 жыл бұрын
When putting the tire back on I use both of my knees on two of the quarter sections to hold it down there and then use a screwdriver
@chaztech9824
@chaztech9824 4 жыл бұрын
i put all 3 knees on it :3
@iceetmarne3571
@iceetmarne3571 3 жыл бұрын
10:23 You try for a while to get it over, and then by magic you have grease all over the edge of the tire! Its a good tip because I know this can be a real pain. Easily the hardest bit IMO.I end up using straps and tightening it to hold one rim under and then use the screwdrivers until over half way. Take it off and then finish the job.
@tennysoncason772
@tennysoncason772 7 ай бұрын
Nice work.
@FarpointFarms
@FarpointFarms 7 ай бұрын
Thanks for the visit
@craigutesch1018
@craigutesch1018 3 жыл бұрын
once the fill valve is thru the rim put the valve cap on it. Prevents dirt from getting in and also keeps the valve from falling back out of the rim because it is larger in diameter. I have always done this on bicycle tires and it saves lots of headaches. You can also by a tire changing tool (plastic) from any bike shop for a minimal price. Far less chance of puncturing an inner tube vs using a screw driver.
@FarpointFarms
@FarpointFarms 3 жыл бұрын
Great tips!
@avpowerstn1
@avpowerstn1 2 жыл бұрын
On another video the guy used a pair of vise grips to hold the valve stem...but he didn't show the tire being inflated (setting the bead)...Good Video.... Thank You
@thurm101
@thurm101 5 жыл бұрын
The last time I placed a inner tube in my tire. Everything was fine for a year. But now is see where my leak occurred. The plastic valve stem was split on the outside. I guess it rubbed on the inside of the metal rim. Any ideas on preventing this
@FarpointFarms
@FarpointFarms 5 жыл бұрын
I think it has to do with the placement of the tube in the rim. I had one do that too, but the other 3 are still fine 2 years later.
Mini Tire Changer
11:14
South Main Auto LLC
Рет қаралды 279 М.
🍟Best French Fries Homemade #cooking #shorts
00:42
BANKII
Рет қаралды 47 МЛН
Pray For Palestine 😢🇵🇸|
00:23
Ak Ultra
Рет қаралды 36 МЛН
How To Install a Tire Tube on a Riding Lawn Mower Tractor
11:02
Steve's Small Engine Saloon
Рет қаралды 190 М.
How to Change the Tires on your Riding Lawn Mower
15:36
Western Equipment
Рет қаралды 34 М.
Best Way To Install Riding Mower Tire Tubes - Save Lots Of Money
5:19
How to change an inner tube in a Hand Truck / Wheelbarrow tire
3:22
How to: Install tube in lawn mower tire
21:49
Repairs & Reviews
Рет қаралды 333 М.
How to Put Dualie Tires on a Mower
8:31
chud327
Рет қаралды 888 М.
How to mount a small riding mower tire. Very easy method.
2:51
Mechanical Mind
Рет қаралды 186 М.
How to Install an Inner Tube on a Cub Cadet tractor
13:03
Richard Spaulding
Рет қаралды 28 М.
How to dismount and mount lawn mower tire
7:20
CDH
Рет қаралды 866 М.
คักอีหลี
0:11
เลาะและหาแซ่บไปเรื่อย
Рет қаралды 26 МЛН
Я ПРОТИВ МЛАДШЕЙ СЕСТРЫ / желе
1:00
Li ALINA
Рет қаралды 2,7 МЛН
ШАШЛЫК ВСЕМУ ГОЛОВА
0:16
KINO KAIF
Рет қаралды 1,6 МЛН
2000000❤️⚽️#shorts #thankyou
0:20
あしざるFC
Рет қаралды 6 МЛН
WHY IS A CAR MORE EXPENSIVE THAN A GIRL?
0:37
Levsob
Рет қаралды 18 МЛН