Installing Longtube Headers On My Mercedes CLK500 (Moscowsupercharge Headers)

Finally Installed the LongTube headers on the CLK500 from Moscow Supercharge! Check them out here: shop.moscowsup...
In this video we install a full exhaust system from on my 2004 Mercedes CLk500 with the 5.0L NA V8, the exhaust includes long tube headers along with a full straight piped system!
Subscribe to the channel and don't forget to leave a comment on what you would like to see more of!
Follow me here👇🏼
▫️ Instagram: / 04_clk500
Check out other videos!
LOWERING THE MERCEDES CLK500 WITH H&R LOWERING SPRINGS!! • SURPRISE! FINALLY LOWE...
DYNO TUNING My Mercedes CLK500 at RaceIQ Performance!
• FINALLY DYNO TUNING My...
5 Things I Love About My Mercedes CLK500
• 5 Things I Love About ...
How To SUPER CLEAN Your Engine Bay [Mercedes CLK]
• How To SUPER CLEAN You...
INSANE 500WHP & 600Ib Torque Mercedes Sl55 Amg After RaceIQ Dyno Tune!!
• Riding In My Friend's ...

[@michelfeghaly2608]

Cant wait to see the final result after the tune 🤘🤘

[@HeyboysGarage]

Soon! Basically unlocking the full power of the m113

[@19PatMcDowell90]

Absolutely dope as hell, finally a CLK V8 with true straight piped exhaust from front to back

[@HeyboysGarage]

I know right!! I don't know off anyone on youtube that have put longtube headers on the CLK500

[@zaidenwolfestrratton6542]

=====LOVE THE CAR,I HAVE 2003 CLK 500 AND AM DEBATING STRAIGHT PIPING ANY DOWN SIDE AND HOW OVERALL IS THE CAR AFTER THE UPGRADE,THANKS DUDE

[@HeyboysGarage]

There are no downsides. It’s a rocket for the 5.0 m113 on a stage 2

[@remix4054]

I've been wanting to order from moscow but waiting 4-6 months sounds like a pain

[@HeyboysGarage]

You will probably end up waiting about 2-3 months

[@HeyboysGarage]

Keep in mind the headers would have to be made, they aren't just a stock production. So if you really want LTH its worth the wait because you wont find them any where else

[@zenyachty8999]

@@HeyboysGarage that's actually even better and worth the wait.

[@HeyboysGarage]

@@zenyachty8999 yes! I know a few people that have gotten their or ordered

[@shafi10a]

How did you not get a CEL?

[@HeyboysGarage]

I have no clue! They cleared it and it never came back. Until I went to go get the tune

[@ashafi4092]

@@HeyboysGarage is the tune required ? I just recently got a clk500 and all your videos are super helpful!

[@HeyboysGarage]

@@ashafi4092 yes it’s required! That’s how you gain power!

[@ashafi4092]

@@HeyboysGarage thank you!!!

[@bleachstain9785]

Just redline it. Got open headers on mine, that sucker rips. Probably gonna do this but with dual cutouts and dual pipe on either side to some dumps behind the rear tire. I build sound systems and understand the concepts of resonant and tuning frequency. You could ditch the 2.25” pipe for 2.5” for a slightly deeper tone. Alternatively you could do 3” pipe to the X pipe, going to 2.5” out the back. This will alter the way the exhaust flows by speeding up the scavenging effect, give it a super deep tone, and a hell of a lot of growl, pop, and crackle.

[@HeyboysGarage]

It for sure rips with open headers! That setup will be sick dual exhaust! Thats the nice thing about the 3' piping but the downside is, it thats going to reduce power and torque with this engine. Its not a big enough engine/ not enough power to benefit for a 3" pipe. But if you are going for sound that would be perfect.

[@MrMachacker]

My bro.. These guys are selling you snake oil. You do not need colder plugs on n/a engine with headers.. LOL Colder plugs are effective for 600HP boosted platforms with high flowing injectors and larger throttle bodies which is why they are advised on modded M113k cars. Do the valve covers yourself. 2 hour job if you take your time and clean out the gasket channels on the main covers and breather covers with sandpaper and isopropyl.

[@HeyboysGarage]

My tuner told me the exact same thing you just said! Word for word! I’m glad you also pointed it out! I do not need them on n/a engine with headers! 🤘🏾🤘🏾

[@Plutoapollo]

Okay i had my ecu repaired, got it home and plugged it up it was kinda funky at first couple cranks but then it cranked up and ran and idled smooth. I turned it off and now it wont crank anymore the engine fan comes on at high speed the dashboard lights works but still no crank no start. Any suggestions ?

[@HeyboysGarage]

If you guys know any solutions to this problem, comment and help our fellow CLK owner

[@datguyuknow2101]

Check for codes, Thiss was 2 years ago but maybe a sensor like crank or camshaft position sensor went out as well, perhaps entirely on its own

[@Plutoapollo]

@@datguyuknow2101 thanks, wow 2 years ago. I remember making this comment too

[@ANDERZENAMG]

Sounds mean, the dudes and shop doing the install seem super chill as well, always good to find!

[@HeyboysGarage]

Couldn't agree more! I'm glad I was able to get this install done with them

[@gabrielwilliams1005]

Those m112s and 113s love to leak out the rear mains.

[@HeyboysGarage]

Yea they do, I wouldn’t worry too much about it unless it’s leaking real bad. It’s a big job to get it seal back up again

[@mariana_8395]

I have e550 2008 where can i get hearders

[@HeyboysGarage]

Check with VRP, Moscowsupercharge, USA mbheaders -and Google should tell you a few also

[@justbrandonll2773]

12:26 gotta replay button for yall 😂😂

[@HeyboysGarage]

i know!!!

[@Plutoapollo]

Sounds like a true foreign race car 💪💪💪. Good choice

[@HeyboysGarage]

Thanks! Its a monster

[@zactormak]

how much did they charge you to install this brotha?

[@HeyboysGarage]

Labor and parts I think around $950

[@alanmotran426]

You don’t need step colder plugs cuz you don’t have forced induction.

[@HeyboysGarage]

Yeah nahhh, I didn’t get them

[@piotrw9732]

Hi, can you say which headers you used? Any cat were left?

[@HeyboysGarage]

It’s in the title of video, and no cats!

[@kent426]

Why did you get the stock diameter single tube? Serious choke.

[@HeyboysGarage]

From the headers connecting to the exhaust??

[@davonislit8651]

I must do this😢

[@HeyboysGarage]

You should!

[@thvmcs]

no caap

[@ShoKK1337]

CLK Gang 👌

[@HeyboysGarage]

CLK Gang!

[@dajerseyrat]

where the headers join to the exhaust looks terrible..

[@HeyboysGarage]

I think it looks great, not sure what looks terrible about it?

[@leat55]

Hey if U got these Headers from Moscow Supercharge Europe then this is my Dad if got more stuff from my dad and put them on ur amazing CLK and show them will be amazing and also my dad owns a Mercedes E55 AMG w211 and he just tunned it making it over 500hp

[@HeyboysGarage]

I did get these headers from Moscow Supercharge!

[@W210Garage]

Hello. Have you used any type of Gasket where the Headers meet the downpipes?

[@HeyboysGarage]

I know the shop used stock Mercedes gaskets from were the engine and headers bolt on. The headers are welded to the reset of the exhaust. I hope that answers your question?

[@W210Garage]

@@HeyboysGarage Yep, that is original gasket from mid years CLK430. Kleemann USA Confirmed.

[@HeyboysGarage]

@@W210Garage nice! Did you get a set of headers on your w210?

[@W210Garage]

@@HeyboysGarage I have got MKB made ones from Germany. Almost the same style as Kleeman, but more heavy duty. Am going to install them on Thursday on my M113.

[@HeyboysGarage]

@@W210Garage Dude you are going to love it! The stage 2 tune will make a difference! tahts if you get rid of the cats

[@hansdroms6243]

The car sounds great. Found this video by looking at headers for my SL55 at Moscow Supercharged

[@HeyboysGarage]

Thank you! Yes Moscow Supercharged make really good sounding headers

[@Lupe.CLK430]

You went back to a Y pipe?

[@HeyboysGarage]

It’s always been a Y pipe, I actually didn’t end up doing the Xpipe

[@veeshilunga5048]

Nice what rims do you have on and size ? Where you get your grill?

[@HeyboysGarage]

Aodhan wheels. 18x8.5. Grill I got from eBay from 55tech

[@aywall5905]

Those blue plate lights gotta go get 5k or 6k stop with the hood shit

[@HeyboysGarage]

They’ve been changed a while ago No worries!

[@juanrios9577]

Bro i have one question for you

[@HeyboysGarage]

Yeah what’s up?

[@juanrios9577]

hey i have a clk 500 206 and i have the p0446 problem what do you think is the specific part?

[@HeyboysGarage]

@@juanrios9577 it’s an EVAP leak. Possibly need a new charcoal canister

[@MrGaracie]

how long did you wait for headers to arrive from russia ??

[@HeyboysGarage]

About 3 and a half months

[@criticaljim1]

Little heads up here, your exhaust hangar at the transmission oil pan is missing. That's how I got my CLK, the previous owner had some new cats installed and the shop "lost" the exhaust hanger, ended up cracking the exhaust manifold, since there is nothing holding up the exhaust between the header studs and exhaust tip, due to vibration. It's about $35 for that hardware from Mercedes Parts Department

[@HeyboysGarage]

Good catch! I'm going to look into that and see whats up.

[@HeyboysGarage]

I'm thinking it wasn't the shop.. thats probably how I got the car...

[@HeyboysGarage]

I'm doublw checking right now, but I see what you mean, once I get confirmation I will let you know.

[@HeyboysGarage]

I check same day, forgot to reply but everything was connected. During filming they hadn’t connected it yet

[@unclebenz563]

Can confirm, all 16 studs and bolts on my headers needed to be replaced when i installed my headers on my E55. Car sounds insane now! Will be interesting to see perfomance difference on the NA M113 with headers. On my supercharged M113 engine my 100-200 kph times went from 9,3s to 8,4s just by changing headers and pre cats , while being on stock software.

[@HeyboysGarage]

Yeah the supercharger will make more power with simple bolt on’s vs the naturally aspirated m113. But the m113 is no match to the m113k

[@budgetgrower110]

bro your car sounds insane! keep up the videos

[@HeyboysGarage]

Thanks bro 🙏🏾

[@girl600podcast]

Enjoying the series from a 2 time #W208 owner.

[@HeyboysGarage]

In glad! Do you own a w209?🤘🏾

[@hansondardignac7049]

EcE makes great polyurethane mounts never gotta replace again

[@HeyboysGarage]

Really??? For both engine mounts and transmission?

[@hansondardignac7049]

@@HeyboysGarage yes

[@hansondardignac7049]

Talk to me bro got madd shit I put on my clk500

[@HeyboysGarage]

@@hansondardignac7049 I gotta look up those mounts on google to see if I can find them. How long have you had yours?

[@AddyAesthetics]

Insane Sound Bro 💪

[@HeyboysGarage]

Thanks 🔥

[@dtlifestyle8239]

Man this thing coming along hands down best set up CLK in the atl

[@HeyboysGarage]

I know!! Did a stage 2 that I thought was not possible

[@dtlifestyle8239]

@@HeyboysGarage hell yeah I seen that I bet it rides a amazing now

[@HeyboysGarage]

@@dtlifestyle8239 thanks! We gotta meet up again

[@dtlifestyle8239]

@@HeyboysGarage we got too! Hey isn’t there a meet tonight??

[@HeyboysGarage]

@@dtlifestyle8239 by which group?

[@brianmendez1892]

Do you know if you can manual swap an 05 clk

[@HeyboysGarage]

I believe so, but Don’t quote me on that

[@bruceleemuhammadali]

Next up different RPM range sound notes and in cabin pull sounds!

[@ANDERZENAMG]

Yes you can 😎

[@criticaljim1]

@@ANDERZENAMG check anderzens channel, he's done it on a c55! Love it

[@HeyboysGarage]

Yeah I watch his channel, also seen it on another channel. I don’t remember the name of that channel tho

[@lukmanabdul8657]

Nice clk man my dream car

[@HeyboysGarage]

Thank you, the 500’s are very fun

[@leonardopacheco5954]

So when you install headers do you have to do all these other things as the guys on the vids say ?

[@HeyboysGarage]

You only have to get a stage 2 tune that’s it.