INSTALLING & PERFOMIRNG ECU MALOSSI FORCE MASTER 2 | YAMAHA YZF-R125

KIT MALOSSI: www.motoscoot....
Instagram:
/ nayden4o
Donate:
www.paypal.com...
Twitch:
/ jesucristohd
Steam Group:
steamcommunity....

[@marisvuskans9730]

Thanks a lot for your video. Manual is rubbish. I bought yesterday from Yamaha dealer and manual helps just a bit. Your video helped to set up properly this device. Advice guys - don’t buy 180 cc cylinder without malossi force master 2. I bought cylinder 180cc in last year and revs were wrong, couldn’t start properly. It was nightmare. Only now I bought force master and now seem ok. So don’t waste money and time for buying only cylinder. Otherwise you will Chuck your bike in the bin- I had theses thoughts for almost 1 year.

[@cserimark-5476]

hi, do you still have the bike? how is the 180cc kit doing?

[@googleprofile6660]

​@@cserimark-5476it's made by malossi so expect the best

[@MauricioPenaloza-ok1mv]

Hola disculpa, ya tengo cilindro 180cc , pero no se configurar mi malossi force máster 2 . Podrías ayudarme ?

[@Joséribeiro-t2e]

Bonjour comment brancher boîtier malossi Power Master 2 sur un 125 cbr 2008 injection si vous avait un schéma ou photo merci

[@Elias-bi6ms]

I have yamaha wr 125x model 2013. I bought force master 2 for tiger full exhaust and can't find really working settings. Iddling is terrible but it takes pretty good rpms. I ordered today K&N air filter i hope it helps. Later this summer i'll buy 180cc malossi kit.

[@michaelhansen6681]

Hallo can you maybe help me? with the setting? malossi force master 2 I drive one yamaha yzf r125 2013 with Naraku 150ccm 60mm with original 125 head 🫶🏻 what is best for me?👍🙂

[@DimAlex76]

Hallo. Do I need to change anything in the fuel supply system...injector, air meter...?

[@nfs22_6h4]

hola,te se a encendido la luz de averia de motor alguna vez?? yo he montado el kit con centralita incluida para la yamaha xmax 125 y de vez en cuando me parapadea esa luz,gracias.

[@emil2158]

I LOVE YOU

[@Gtxgaming-ri6no]

Do you think this would fit onto a yamaha xsr 125 2021 it's the same engine so I'm wondering if it would mostly be set up the same

[@kaapov3455]

Is it the one that is designed for Yamaha aerox

[@peter9158]

I have a request if you could help me with Mallossi force master 0 honda vision nsc50 2012

[@jakegoodwin6578]

Very helpful, thanks a lot mate

[@vitalyy11]

Bro, I have just installed a kit with the 180cc cylinder block and a cylinder head, but left the stock camshaft and exhaust etc. What map settings do I need to use out of these 4?

[@jdmcareditz9143]

1 you can only use 1 if u only have the cylinder bro. If u buy a sports exhaust and a racing filter then 2...btw i have a question. Did the bike get stronger after the 180cc map and if yes how much stronger

[@MauricioPenaloza-ok1mv]

X2

[@kannibaali675]

where does the blue cable go?

[@nathandesouza3159]

How much was the ECU and where did u get it from?

[@Jesucristoh]

I bought the complete kit for 550 in a physical store

[@akselsen_5159]

which model is the yzf?

[@Jesucristoh]

2008

[@akselsen_5159]

@@Jesucristoh did you notice any power difference?

[@shakal615234]

@@akselsen_5159 R6 has no chance ;)

[@iantubon2158]

I put the force master 2 with the r125 stock ecu?

[@Jesucristoh]

Yes

[@didieroliveri9168]

Es ce que c'est légal en France ?

[@CHRIS-pq4di]

non faut pas se faire choper ou avoir un accident ...je l ai installer sur mon forza 125 ca marche pas aucune performance malgrer differend reglage j ai jeter 250 euros a la poubelle a eviter cette daube

[@77350tony]

@@CHRIS-pq4di bonjour Chris Sur la vidéo il a laissé le fil bleu débranché c’est normal? Au calibrage il a laisser le high à fond pour faire le calibrage mais après quand il remet off la flèche était déjà sur le 0 Tu peux me dire ce qu’il en est? 😅 merci Et si y’a d’autres réglages à faire par la suite par ce que je ne comprends ps qu’il y ai plusieurs niveau

[@CHRIS-pq4di]

@@77350tony le fil bleu est libre .. c est a dire qu il sert a rien il faut rien mettre dessus ... calibrage ? cette daube calibre rien du tout j ai fait tout les reglages dans different mode et le 125 n allait pas plus vite !! a un moment donner le forza il demarrer meme plus !!! j ai tout debrancher et mis cette merde a la poubelle et le scoot marche mieux sans ce kit a la con..publicité mensongere si vous acheter ca vous jeter 250 boules a la poubelle..

[@youbamax]

​@@CHRIS-pq4diyou probably made a mistake during installation

[@jonayalamoguadalupe1214]

Buenas alguien podría decirme si sirve para Yamaha ys 125