Installing Progressive's Monotube Fork Cartridge

[@harry-qy2fz]

I bought the progreesive monotube no. 31-2501. It says that it can be lowered up to 2 inch n my question is if I do not want to lower it can I use it at standard height aswell or the tube already comes lowered?

[@davidwilley6199]

Is it necessary to remove the front of the fairing?

[@Chestermite1]

Installed on a 2005 RoadKing. Ride is a bit stiffer than expected but better than the original OEM Front end. I could remove one of the shims but will try it, as is for now. Time to change, has to be weighed. Not a quick thing to change. Instruction were vague both with kit and this vid. I thought. But once ya commit ... just keep goin. Bike tracks truer, like it's on rails.

[@davidwilley4524]

I just installed the standard height 31-2500 and it sits a lot lower than the standard Harley springs.I should have left it alone.

[@dougfresh1341]

How many spacers did you use?? I'm getting ready to install these. It looks like preload spacers should be on the heavy side.

[@jackgentile2417]

I'm a little confused by this video. Great content but I have a question. In the start of the video you remove fairing, then in the end you are re-installing the forks but the fairing is back on?? Does the fairing have to come off? I have a 2017 Road Glide

[@dougfresh1341]

The fairing does not have to be removed. You will have to remove the ignition/lower dash to access the top of the forks.

[@Inkesomnia]

What’s the average Harley rider weight? I’m 160 pounds

[@NationalParkRider]

Do we need fork seals as well while we assemble this catridge kit?

[@ruthlessinu626]

If you’re taking it completely apart, then why not. I only have 20K miles on mine and I think they recommended 50K to swap out for new seals. So I’m just gonna replace the oil after I drop in these monotubes. Not even replacing my drain bolt washers. Just wrap some thread seal tape, and snug it up.

[@billcasper]

Red loctite on that??

[@dougfresh1341]

Yep.

[@mml1224]

good video, seemed2eazy, HD wants avg 600$ 2 do that job

[@possumrides8448]

Not "Bagger"!!! They are "Dressers" For that... I'm buying a Wilber Suspension

[@freebehindbars8654]

Even 1 year later, No One Cares!!!

[@boblucas4333]

Dressers have your packs sport

[@sftosendai]

These are garbage, says has 3 clips for each side, 2 recommended, but my kit only came with 4 clips so went 1 on each side & brake dives just like stock. What a waste of time & money

[@mml1224]

wat else u find thats better than progressive shocks?

[@shep236]

So the suspension is working. If your forks didn't dive your bike would handle like shit. Next!

[@sftosendai]

@@shep236 LOL...dive is obviously a necessity in/for suspension to work, but too much to the point where it bottoms out isn't! Next!

[@davidwilley4524]

Sounds like you might want to add another spacer??Complain about not having enough clips and then only use one on each side??Installer error.

[@raymondpontremoli4500]

Probably a great product but I despise companies that pull this crap like you do on your website. I selected my bike, and up came Fork Mono Tube Kit Standard. $287.00 As soon as you select Standard Kit the price jumps to $459....And If I want the 1" lowering kit the price is $505.00 Great way to do busiess....Won't buy your product ever.

[@kevinbragg7273]

Not a how to video by any stretch.