Installing Subframe Connectors on my Fox Body Mustang Step By Step video!

In this video I install subframe connectors on my Fox body mustang I go over all the steps to get this done especially if you have never done it before like myself! It is not a hard install and you will be able to install these subframe connectors on your fox body mustang first try!
Discord
/ discord
Instagram
/ iamchazhaynes
TikTok
www.tiktok.com/@iamchazhaynes...
PLEASE LIKE , SUBSCRIBE, AND COMMENT ANYTHING EVEN WHAT YOUR FAVORITE FAST AND FURIOUS IS!!!! Mine Is Tokyo Drift.....
THANKS FOR WATCHING AND THE SUPPORT!!!
More build videos are coming if your interested don't just hit the subscribe hit the bell too so you are up to date on the build!!
New videos Sundays! stay updated on the builds!!
9 second fox coming to KZbin very soon!!!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting iAmChazHaynes so I can continue to provide you with free content each week!

[@Gask3y]

Great video man. Lots of info.

[@jimmitchell3331]

Have the same ones on my car, love them!!

[@iamchazhaynes7074]

Heck yeah! They looked like the best quality so I went with them! But awesome to hear good things about them!

[@timweb1510]

Wish I had the steeda or mm for mine

[@iamchazhaynes7074]

MM doesn’t make a kit for your model?

[@GreenToFeelBlue]

What would I do if I jack it up and the door doesn't close properly? Body shop?

[@iamchazhaynes7074]

First I would I check to make sure that it isn’t something simple like the door striker bushings and sloppy hinges. Usually it’s just one of those things but if that didn’t fix it, Then I would try to rehang the door and if you can’t get it right after that then I would take it to a fabricator or body shop to see what they could do

[@WASTED__POTENTIAL]

3:16 enjoy it while you can. XD

[@iamchazhaynes7074]

😂😂

[@kennyp4967]

How much hp is your car making with that BMf

[@iamchazhaynes7074]

Well I’d love to tel you but idk it’s freaking fast on 7psi and conservative timing that’s all I know lol I would have had it dynod but I need to get a stronger rear end in it first. I’ll be making a dyno video as soon as I get the rear done which hopefully be sometime in January

[@kennyp4967]

I'm doing a 351w right now I'm going to order the bmf now I didn't think it would fit under a stock hood the 88mm is too big I don't want to cut the hood

[@iamchazhaynes7074]

@@kennyp4967 ohh gotcha yea with the taller deck height I’m not sure how it would fit mine on my 8.2 deck fits with plenty of room With the BMF and the stock hood with the insulator. This turbo spools extremely fast too. from everything I’ve read it can make a ton power ,but if you look up war admiral 363 on Instagram or KZbin he has the BMF and made 800rwhp on 14psi and 950 on 18psi with with c16.

[@79beans347]

My subframe connectors are just bolted on for the moment, they are the kind that you can just bolt them on or weld them but I think im going to weld them as well and I need to buy me a bob the builder welder so that I can weld mine and a bunch of other things, I don't know how to weld either so its going to be a learning experience. I bet I already know what I am going to learn after I get it welded and that is, I suck ,and Im most definitely not a welder 🤣😂🤣 I noticed that you stayed far away from your welds and made sure it was dark when the camera was on 🤣😂🤣 I laughed my ass off when you had all of the Mickey mouse welding gear that comes with the welder on. They sure want everyone to know that is their brand 😂🤣 or I hope that it came with the welder, you might have picked it all out and if so then " I liked the gear that you picked out, it makes you look just like a real welder and they should make you the poster boy for their gear" ok whew im done lying now 😂🤣 jk You should be about ready for dyno day, have you made a appointment for the dyno yet or what else do u need to do to it ?

[@iamchazhaynes7074]

Oh I definitely got one of those bob the builders welders 😂 hahahahaha at least you noticed I couldn’t have everyone knowing HOW bad my welds were 😂😂 and I bet you liked all those welding clothes 😂😂 I felt like I was wearing a weighted vest for my school picture or something 🤣 and I love how they did stamp EVERYTHING with their logo I looked like a dork but hey I only got hit with a couple sparks that burned like HELL!!! Hahaha I wasn’t going to wear that head cover thing but a couple sparks hit me on the dome and it hurt pretty bad 🤣🤣😂 and dyno day is coming as soon as I get the new rear end that video will be coming soon I have strange 33 spline axles with an Eaton tru-trac and 9” ends and once that’s on I’ll go full send on the dyno but I’m going to have a first drive video on 7lbs here in the next couple weeks to see what kind of damage I could do lol 😂

[@79beans347]

@@iamchazhaynes7074 😂🤣 that is why I called it the bob the builder welder because it looked like it came with the whole outfit and it looked pretty cheesy 😂🤣 because you could tell that they put their logo all over it trying to make u look like a fanboy 😆 I would have felt like a major dork wearing that stuff but it's better than getting burned i guess 😂🤣 what kind of welder is it that you bought because I am going to have to get a hello kitty welder so that I can do the little stuff that I need welded 😆 It will probably come with a Dora the Explorer helmet and my little pony vest or whatever it comes with 🤣😂 yeah man I can't wait to see it in action and you are going to miss having a tinker toy to play with once its going but im sure that you can make up something to do to it like I did, I beefed up my top end of my engine even more with bigger cam, heads, etc. Because my engine is still in the machine shop but he is getting a phone call tomorrow because I am ready to drop it back in with the new bigger freshly ported heads and giant cam . It's for sure going to be a beast and I can't wait to upset a few unsuspecting cars with the bowtie because they are going down like a rock 🤣😆 Man I can't wait for the dyno and first drive, I wish you didn't live so far away because I would come and check it out at the dyno and first drive, did you buy the rearend already put together or did you have it built?

[@iamchazhaynes7074]

HAHAHA it’s the harbor freight special titanium series welder I got it for 300$ open box it fitted my bob the builder needs 😂😂 I peeled the Dora the explorer stickers off before the video started just a lil FYI 🙄😂😂you can really get your money’s worth from harbor freight 🤣😂 but damn your going full race car on that bad boy!! It’s gonna be so fun on the street messing with some bow ties 😎 and I’m building the rear myself I’m going to have someone else weld the 9 inch ends and the axle tubes cause you need a tig welder and special nickel rod or something oh and A jig haha but everything else I’m doing! I’m gonna go get a junkyard 94-98 rear end and hack it up cause I’m poor and need to save money 🤣 and maybe when my buddy finishes his fair lane I’ll be in that area maybe we can get a cruise going!

[@79beans347]

@@iamchazhaynes7074 😂🤣😂 poor man you don't know what poor is and have never seen poor unless you saw me somewhere 🤣😂 yeah man that would be cool if you brought your car over here for a cruise, I would most definitely join in and who ever else that we could get to join, what year fairlane is his car ? I had a 64 fairlane for my first car but I didn't get to do much to it before I traded it for a ford courier and built a motor for it and painted it then traded it for a 67 mustang the car that I should have kept. Yeah I have decided to go more on⁷the extreme side so that I wouldn't regret it later having to take it back apart

[@79beans347]

@@iamchazhaynes7074 yeah I need to get my axle tubes welded as well, the guy i hired to narrow the rearend didn't weld them like i asked him to but building the rearend is pretty easy, i built mine and it was the first one that I ever rebuilt, I always paid someone before but it sounds like you will have a strong rearend compared to my spongebob 31 spline; 🤣😂