Installing the BigTreeTech PANDA TOUCH on Bambu Lab P1S 3D Printer - 5" Touch Screen

[@3DRundown]

Have I helped you? Help ME continue this channel with some support: TIP: Click the "THANKS" button Become a KZbin Member, by clicking "JOIN" Support my Patreon: patreon.com/3drundown Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Bambu Lab: shrsl.com/46lky Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9 Support me via my Course: 3DRUNDOWN.COM

[@Cody-Blues]

Very helpful tutorial, thank you for spending the time on it. PS if you need to find your serial number it is inside the right hand side of the machine right above the rail. It is a small QR code. I used my phone as a magnifying glass, worked well.

[@MichaelTavel]

Very cool! I have been thinking about this on and off and am just going to bite the bullet and get one! Looks like a great 'quality of life' upgrade (might even improve my grilling!) :P I will try to remember to set aside the mount and the mount, and mount the mount to the mount as you demonstrated :D

[@3DRundown]

I think it's super cool. Especially since you can connect it to multiple Bambu Machines. Just be sure to mount the mount mount to the mount mounts mounty mount mount

[@3DRundown]

Get One: amzn.to/49sNFep

[@firecage2846]

Hey, you might want to clip the video at 7:23 minute mark since the serial number and ip addresses are visible for both printer.

[@3DRundown]

I expected this. I use a different wifi for the video, and the serial is bound to my Bambu Lab Account, so, I should be ok. Unless my machines start randomly printing giant Penis, then I know I'm not ok. 😂😂

[@Masoch1st]

SN is something you'd probably want to protect, but those are internal/private IP addresses lol. There's absolutely nothing you could do with that information.

[@brianvanzyl9841]

appreciate the video/content.

[@fannyfilms3908]

Great review, I have a question, does the Panda touch display preview images of the model on the screen? I can't find this information anywhere, thank you very much for the info.

[@3DRundown]

I believe the most recent firmware has added this. As much as I want too, I just haven't had the time to cover this some more

[@PeterAgostiniJdcap26]

Great review , saved this video when my panda touch comes in an p1s !! , thanks . I did get a no clogger tool thanks for that tip .

[@3DRundown]

Let's hope you never need it. 🤞🏼🤞🏼

[@PeterAgostiniJdcap26]

@@3DRundown ditto 👍

[@loquacious1956]

I have a No Clogger on order as well

[@noshdaminsk]

Brilliant video! Thanks very much - subbed now :)

[@3DRundown]

Be sure to get the new 1.6 Firmware

[@Golfzla]

Y 5g when the printer don't run on 5g?

[@loquacious1956]

I have had my Panda Touch for a few weeks now and the only issue I have is that if I turn off my printer and turn it back on later the Panda Touch loses the connection. This seems to be related to the IP Address of the printer being different. I do not like leaving my printer on all the time so this is quite frustrating.

[@3DRundown]

Hi. I am not having this issue at all. All 3 of mine are keeping there connection

[@loquacious1956]

@@3DRundown Do you power them off?

[@3DRundown]

There is a new firmware out, TODAY, that addresses this.

[@3DRundown]

Yes I do.

[@ezloot4u433]

Can you remove the old screen because I sure hope so.

[@3DRundown]

No

[@FaithwalkerTodd]

I think it has to be 2.4 Wi-Fi because that’s what the printer is.

[@gracespreadingcoating336]

We wanna know when will u give us the feedback on the cool plate we once sent to u

[@3DRundown]

I do my best. I am only one person. I have entire printers awaiting time in front of the camera. Please link me to your bed.

[@GreggAdventure]

🎉🎉