Well done. I remember when I swapped a 2JZGTE in my 1988 Mk3 back in 2018 and got it started that September. I was screaming at the top of my lungs from excitement. Feel good; great accomplishment and milestone. Actually, I want that feeling again…
@Sideways_N5511 ай бұрын
Great feeling! A lot of little steps to cover but it all worked out well, no codes for stuff I missed haha
@jibby2294Ай бұрын
doing this by yourself is no easy work, good shit
@Akac3sh10 ай бұрын
dude this channel is so good no annoying music just straight wrenchwork. amazing build brother earned a sub from me
@Sideways_N5510 ай бұрын
Thank you man, yeah I try not to get to crazy with the music. But if I do use music, I try and find something that doesn’t sound corny lol
@brettkrehling8738 Жыл бұрын
Watching you put the engine In the f80 really motivated me. I have a turbo ZHP that I want to n55 swap with a DCT . Big plans lol!
@Sideways_N55 Жыл бұрын
Damn nice! Get N55 while they are still cheap! and drop it down with the subframe don’t be dumb like me lol
@cjortiz81 Жыл бұрын
Each video really gets better and better 😮
@bootyjuice Жыл бұрын
That engine bay is soooo tight 😅 thank you for another banger video--glad you got it running!
@user-jl7hx1zz6d3 ай бұрын
This is an actual built car. I hate all the stupid "I built my dream car in 10mins" videos. This is what building a car looks like and not all the stupid upgraded lights and wheels crap they call building. Just a bunch of soft handed wanna be magazine mechanics. Great content. Show them how its done!
@Sideways_N553 ай бұрын
BUILT NOT BOUGHT BROTHER - APPRECIATE THE KIND WORDS
@micahgildernew5712 Жыл бұрын
Love the build I have a F82 m4 that I want to go single turbo! I had a 335i upgraded twin turbo N54 before and copied your dual oil cooler setup and it worked like a charm Keep up the content bro!
@Sideways_N55 Жыл бұрын
AYYY OG VIDEO! appreciate the love!
@visionsofalignmentllc18211 ай бұрын
Hood is always the first thing i pull ;)! Good job!
@Jylng Жыл бұрын
you deserve more recognition! keep up the good work
@Sideways_N55 Жыл бұрын
Appreciate the kind words! I’m working on E92 M3 video now and will have more F80 content after.
@Calamitydrift Жыл бұрын
I commend on your patience I couldn't do it
@CrispyImmy11 ай бұрын
im in! Good stuff man looking forward to it on the road
@Sideways_N5511 ай бұрын
Appreciate it!
@biancacollects Жыл бұрын
🔥
@InitialRacing Жыл бұрын
Don't forget the rubber gromets!
@Sideways_N55 Жыл бұрын
For the oil cooler? Yeah, I still need to find some, there is no real part number for them.
@MikeyG0039 ай бұрын
you should change out that stock charge air cooler while car still isn't finished. The stock ones are prone to leaks as you already know. I'd recommend going with mishimoto instead of like CSF cuz CSF is all marketing and never shows data to back up their claims while mishi does and it is cheaper. Kies motorsport tested CSF and it actually lost power over stock.
@Sideways_N559 ай бұрын
Yah I was going to go mishimoto, was waiting for Black Friday. Or a sponsor lol
@MikeyG0039 ай бұрын
@@Sideways_N55yeah wait for Black Friday lol, also there’s some sites that don’t charge sales tax. I got mine from topgearsolutions
@Sideways_N559 ай бұрын
Yup actually where I bought the clutch, mid pipe and some other stuff from!
@kylepalmer2360 Жыл бұрын
Sickkkk while I’m here tryna build my n26
@Sideways_N55 Жыл бұрын
As long as you’re working on a car bro we all the same haha
@AGM240i Жыл бұрын
Nice build 👍🏻 When will drive video coming out ?
@Sideways_N55 Жыл бұрын
Very soon!
@okioxaru11 ай бұрын
dude fire vid U got a sub. What’s that outro song?
@denverfan8810 ай бұрын
Any vid on how you plumbed WG and ebcs???
@leonardwaker70245 ай бұрын
did you run an oil catch can for your build?
@mylifeinnewyork5625 Жыл бұрын
nice build but your gonna burn the seals on your water pump and your gonna have low preasure cooling system leaving it running for as long as you did.
@Sideways_N55 Жыл бұрын
It was on for like 30 seconds at its max, I suppose cause it’s mechanical it could, thanks for reminder.
@NikkoCruz14 ай бұрын
Sorry if I didn’t catch it in any of your videos but what did you do for boost control? Going from ewg to a external waste gate is really confusing me lol
@Sideways_N554 ай бұрын
It’s controlled by a Mac solenoid and motiv reflex. Mac solenoid controls when wastegate should open. If you look up N54 info there’s a bunch, same type of set up.
@YeaWellThatsLikeUrOpinionMan11 ай бұрын
When is this thing going to hit the road? I am trying to decide what turbo kit to get
@Sideways_N5511 ай бұрын
Bleeding coolant and clutch tomorrow, base map is ready, then dyno tune.
@YeaWellThatsLikeUrOpinionMan11 ай бұрын
@@Sideways_N55 I’m excited to see how it sounds and drives! A few questions for you: what turbo did you go with? What horse power are you targeting? Does the downpipes hookup to the stock midpipe?
@albytube883111 ай бұрын
Can anyone tell me what music is that in the background
@HB_M511 ай бұрын
Nice build man. It’s really motivating. I recently spun my crank hub and was looking into forged built too. You mentioned you blew your engine and got a built one from Miami engines. Did you buy another used engine and sent it to them or they sell forged built engines?
@Sideways_N5511 ай бұрын
So you can send your engine and they can rebuild it or you can pay about $2000 more to have them send you an engine if they have enough blocks, and then you can send your old engine back to them and they should refund you the $2000, so like a core return at auto parts. I went for having both engines in front of me. That way I can transfer everything without getting confused and mixed up. It doesn’t really cost anything more and because they’re kinda local I can drop off, so I don’t have to pay shipping to return the engine.
@HB_M511 ай бұрын
@@Sideways_N55and how fast did you get your st kit? I checked their website it says 4-6 weeks but some say it could take months. Thanks!
@Sideways_N5511 ай бұрын
@@HB_M5 the kit took about 3 weeks, I ordered when they first came out. And Miami engines was like 2-3 weeks to build new motor and ship.
@HB_M511 ай бұрын
@@Sideways_N55 also why did you go with clutchmasters? Specclutch offers the same set up for less $? I’ll be doing clutch too and was considering spec, didn’t even look into masters. Thanks for your response.
@getseriousgaming222211 ай бұрын
What's the lift that you use to support your Car?
@Sideways_N5511 ай бұрын
They are called quick jacks.
@lolabyssical8881 Жыл бұрын
Wheels camber and toe can I know please?
@Sideways_N55 Жыл бұрын
F 18x10.5+20 with if I remember right a 12mm spacer to clear strut, 295/35, min 3 degrees camber required. Rear 18x11+34 no spacer 315/30/18
@Dominik.99911 ай бұрын
Whats name songs?
@danny2376 Жыл бұрын
did it throw a code on first start up?
@Sideways_N55 Жыл бұрын
No actual cylinder misfires, just like the maf and intake codes. So I didn’t miss anything apparently lol
@yg78t76t7 Жыл бұрын
How much power are you looking to extract out of this motor?
@Sideways_N55 Жыл бұрын
It’s built for over 1000, I would like 800-1000
@Rollinguyf80 Жыл бұрын
First
@leonardwaker70245 ай бұрын
did you run an oil catch can for your build?
@Sideways_N555 ай бұрын
I have a mishimoto one I ended up fitting right at the corner next to the turbo. Tight fit but it fits