Installing the Mina Gallery Intake on the XJR

  Рет қаралды 10,295

Low Tech Garage

Low Tech Garage

Күн бұрын

Пікірлер: 71
@DrNergaard
@DrNergaard 3 жыл бұрын
I love the fact that you show the entire detailed process with fitment problems, missing bolts, creative solutions, etc. :-) Keep it up. Very informative and useful Jag info. Im starting to feel comfortable with my XJR now. A lot!......
@LowTechGarage
@LowTechGarage 3 жыл бұрын
Thank you! We are glad you enjoyed the video. We try to be as transparent as possible with our experiences.
@godsmetal1
@godsmetal1 5 ай бұрын
Thanks for the tutorial. This was the only video I found that showed how to remove the air intake on the xjr. I wasn't quite sure how the bottom was mounted on and being a 20+ year old car I'm not trying to man-handle anything and break plastic/rubber. But with your video was successfully able to proceed to remove it. Thank you!
@LowTechGarage
@LowTechGarage 5 ай бұрын
Glad it helped!
@Roscoeverdin5469
@Roscoeverdin5469 3 жыл бұрын
I replaced my stock intake with the Mina Gallery intake a couple of years ago. A few comments. When cutting rubber, use soapy water on the knife or what ever you are using to cut. Also when fitting rubber components onto engine components, do the same. It makes a big difference. If you need spacers, consider using large nuts. Now, this might not sit well with most, but I would not use a cone filter. The X308 uses a cold air box and the filter is quite efficient. When a Cone filter is used in this setting, the filter is sucking in hot air from the engine compartment because it doesn't seal like the factory filter box. Secondly, cone filters are advertised as being high flow filters, which they are. However, they don't filter well and will lead to premature engine failure. I know this first hand. Yes, you will hear more engine, but it's not worth the risk to the engine.
@LowTechGarage
@LowTechGarage 3 жыл бұрын
Thank you for your feedback! We are considering a prescreen to go over the cone filter to add a little more protection
@flyurway
@flyurway 3 жыл бұрын
I was thinking the same thing about the "cold air". I know with the XK's it's a real problem trying to improve on the OEM box as it's already a cold air setup, taking all the air in through the wheel well. And with even less room in the compartment it's near impossible to actually incorporate a better arrangement that actually works and doesn't suck half the air from the very hot engine compartment.
@kenanbakalbasic4706
@kenanbakalbasic4706 2 жыл бұрын
What about with a regular xj8?
@tkudwa8790
@tkudwa8790 3 жыл бұрын
Great video I have 99 Jaguar xjr will be using this as reference when I buy the intake
@LowTechGarage
@LowTechGarage 3 жыл бұрын
Thank you! We are glad it was useful for you.
@kevinfloyd1864
@kevinfloyd1864 3 жыл бұрын
Clean engine. OK, it needs to be dusted. While I don't have a Jag, your videos are really informative. Years ago while Colorado, I did rent I Jag like yours. Love It.
@LowTechGarage
@LowTechGarage 3 жыл бұрын
Thank you! She's a work in progress!
@nysteelhorse
@nysteelhorse 2 жыл бұрын
@@LowTechGarage Aren't they all!
@gregdettling6693
@gregdettling6693 3 ай бұрын
@ Josh! Great video! Just what I wanted to see. When i first purchased my X308 XJ-R one first thing I noticed was jaw dropping attention ( and that was very unexpected ) and I’m not an British car person ( I had thought a BMW or Benz or Porsche was much more jaw dropping to me ) but the classic classy timeless style and that it is somewhat rare to see a Jag like this seemed to send people running to look in the windows and look at the body. Then I drop the bomb by telling them this is a supercharged V8 jag. The first guy that ran to it when he seen it was just after purchasing it and I was gassing up ( my first time to gas up in fact ) and he was a McDonald’s employee in the Canadian Rocky Mountains and he was taking out the garbage and when he seen the Jag getting gassed up he just dropped all the garbage, spilling garbage everywhere, and he forgot all about his job and just ran up to look in the windows of the car going Awww mouth wide open …is it for sale ???? His girlfriend who also worked at the McDonald’s was next to jaw drop and run outside when I pulled around front after gassing up. I absolutely couldn’t believe this reaction from people! This was in the town of Canmore near BANFF Alberta..And I thought it would end there but it didn’t and I’m always surprised when I get approached. But I’ve started to notice how they are walking up to you. This car is like a ‘license’ to talk to you. People automatically think we are in some kind of same club together and they want to tell me their back story. Their own personal relation to the car. I’m delighted a car this old can have this sort of strong reaction on people. :) Almost 27 years since first purchased. And it was first purchased near Toronto where I am now. A place called Sarnia Ontario. Not far from Toronto. So I brought her back home. Amazing ! But it is a bit weird getting approached. I’m not sure if I really need the added attention but it is okay. Feels a bit weird to be a bit high profile. If I take my Black Lena out on a long drive I get approached at least 1-2 times. Especially it seems to be while at McDonald’s or while gassing up. People still have a love affair with the automobile. This car maybe more than many others symbolizes the bye gone age of the classic automobile. Something left that is timeless and iconic rolling down that’s still left rolling down the road. You can’t get beat or bullied either by other regular drivers in regular cars. Just too much smooth torquey pick up and go! The very next thing someone said to me is that it is extremely easy to add HP to this car which is just by adding a COLD AIR INTAKE they informed me that I could get it up to 400hp just by doing only that. That made me think of watching this video you made tonight. COLD AIR INTAKE! :) I’m sure at 27 years old I’m not at 370 hp any longer but 400 hp or anything 400 and over sounds like fun ( if he was right about that ) Sooo easy to get those cars up over 400 hp he said.. I’m more of a pure stock sort of guy just to keep things as simple and basic as possible. But if I did so just one modification it would be cold air intake. I think the silver air intake pipe looks super cool! Just performed my oil change for the fall on October 11 -12 I had 3,700 miles on the old oil. The shop I found in Toronto did a great job!! They drained the old oil out over their lunch hour so it was able to drain on the hoist for well over an hour. :) They added 5 L of 5w30 full synthetic Castrol I topped it up myself with one more L It took about 80% of that last L (5.8 L of oil total ) plus I think the oil filter must have taken some more when they primed it. Air filter was still good from August 6 The oil now looks really clean. I think they did a super job of draining it. :)
@LowTechGarage
@LowTechGarage 3 ай бұрын
These cars really are timeless and get more attention the older the get! The intake was a fun install and you definitely hear the supercharger a little more too.
@gregdettling6693
@gregdettling6693 3 ай бұрын
@ Josh It’s been a long day fixing my old plastic factory spec air intake! But now with a very unprofessional black electric tape fix and with that plastic finger completely missing and the tape sealing off the hole ( even with it running what seems like better than ever after my homemade fix at home ) I have the perfect justification for installing a new cold air intake and I want one just like you have on yours. !!! I love the stainless steel air intake tube and the red cone filter. The company that supplies those after market cold air intake systems out of California seems very reputable and on point. LOOKS LIKE A MILLION BUCKS!!! the plastic finger i removed was the one closest to the windshield. It had a/c written on it. I was stranded up in the north part of the city for about 3 hours in middle of the night. The car would barely keep running but I found a way to limp it home by quarter to six in the morning. Then I slept zzzz Once that hole was closed well with tape the car ran like never before. :) The crack in that finger was destroying the full vacuum. :(
@youknowitstrue4182
@youknowitstrue4182 3 жыл бұрын
Great video. My Mina gallery intake tube and filter for my 1999 XKR are currently on their way and your tips will help with the instal.
@LowTechGarage
@LowTechGarage 3 жыл бұрын
Best of luck with the install! I am sure you will enjoy.
@flyurway
@flyurway 3 жыл бұрын
I put one on my '04 XKR a couple years ago. The issues with the XK's though is that there's less room to configure and it's already a cold air setup. I just went with the tube, it looks nice and it eliminates that damned "accordion" on the plastic intake. I left the original box as it's still the best way to go for actual cold air. All the shrouding of the aftermarket box doesn't seal out the hot engine heat as well as the factory setup so don't count on any gains being any more than a placebo effect.
@jackuaro
@jackuaro 2 жыл бұрын
Substantive, purposeful, elegant. Car and driver.
@LowTechGarage
@LowTechGarage 2 жыл бұрын
nailed it!
@Izanagi2072
@Izanagi2072 3 жыл бұрын
Great video, just used this to install my own intake in less than an hour - Much appreciated!!
@LowTechGarage
@LowTechGarage 3 жыл бұрын
Glad it helped! Enjoy the supercharger noise!
@superpeluso1
@superpeluso1 2 жыл бұрын
I purchased mine and i kept the original filter box so it’s more original looking I do get a little bit more whine but I know I surly feel the difference I even tried before and after and I surely feel it more aggressive than before. Very happy about my upgrade…. Even the exhaust sounds different it even farts 💨 here and there 👍🏻☝️
@LowTechGarage
@LowTechGarage 2 жыл бұрын
We have been thrilled with ours so far.
@McJagR
@McJagR 3 жыл бұрын
Glad I watched the video! I have the same kit on mine and had the exact same issues minus the bent surrounded but I'm going to make these same modifications thank you
@LowTechGarage
@LowTechGarage 3 жыл бұрын
We are really glad it helped!
@WolfgangJaenchen
@WolfgangJaenchen Жыл бұрын
perfect and super! everything worked out exactly the same. thx
@LowTechGarage
@LowTechGarage Жыл бұрын
You're welcome!
@Herve747
@Herve747 2 жыл бұрын
Nice cat ! I've just purchased an XJR100 and looking to improve it on the performance side.
@LowTechGarage
@LowTechGarage 2 жыл бұрын
Lovely motor, there are some simple upgrades, a lot noted on the channel, that can improve performance!
@tamiresstefanini9064
@tamiresstefanini9064 Жыл бұрын
The channel is very nice, you can learn a lot on how to work on the XJR, the only downside is the amount of ads in the videos. :(
@LowTechGarage
@LowTechGarage Жыл бұрын
Working on it!
@goldenzaps2737
@goldenzaps2737 3 ай бұрын
I'm debating on getting the performance intake tube, because the original intake tube has that sort of growl to it but I'm wondering if the performance tube takes away that growling noise
@LowTechGarage
@LowTechGarage 3 ай бұрын
It’s still there but you hear the super charger a lot more
@CoopQoop
@CoopQoop 6 ай бұрын
Just ordered my kit. 3 years later. Exact same issues lol
@LowTechGarage
@LowTechGarage 6 ай бұрын
Enjoy!
@EssexSilvering
@EssexSilvering 5 ай бұрын
Hopefully you'll see this message and write back to me. I fitted mine about 5 months ago and I was wondering if your getting the same noise as I am, ... When you floor it, everything is fine, supercharger whine is lovely and noticable, when your at low revs, it also sounds fine, but when your in the middle range, like half way on the throttle and climbing a hill for example, I can hear what sounds like a air leak type of noise, yet no leak visable, are you getting the same sound? It's hard to explain the sound, just sounds like air escaping type noise.
@LowTechGarage
@LowTechGarage 5 ай бұрын
You are likely hearing the bypass valve on the supercharger opening. It vents back into the inlet.
@EssexSilvering
@EssexSilvering 5 ай бұрын
@@LowTechGarage So big question - Are you getting the same noise? If not, is there anyway I can delete this noise? Thanks for your reply.
@LowTechGarage
@LowTechGarage 5 ай бұрын
@@EssexSilvering Here is a little more information on the bypass valve functionality. From what you are describing, it sounds like yours is working correctly. However, it may be worth checking. www.jaguarforums.com/forum/xk8-xkr-x100-17/s-c-bypass-valve-actuator-216249/ Honestly our XJR is off the road right now, so I cannot confirm/recall as of today. Best of luck!
@InSlobnia
@InSlobnia 8 ай бұрын
My STR sounds like that stock. I wonder if the mina would improve it.. or would I just waste my money
@LowTechGarage
@LowTechGarage 8 ай бұрын
It definitely is more audible with the intake!
@TransformationDetail
@TransformationDetail 9 ай бұрын
I know you went with the powerhouse stuff but is there any reason why you didn't go with the Mina Gallery pulley that they offer? I've been looking at their full air intake, pulley package for awhile but now after finding your videos I'm thinking about going the same route you did with the powerhouse stuff. I've had a similar intake setup on mine for some time now but I might pick up at least the elbow piece since I already have a pretty decent cone filter with a good heat shield.
@LowTechGarage
@LowTechGarage 9 ай бұрын
Powerhouse provided a core service where they would send you a rebuilt and machined supercharger snout with the 2.5 lb pulley already installed. It made things simple as far as installation. I’ve been very pleased with their service and products. Even though they are in the UK the parts arrive quickly. I hope this helps.
@TransformationDetail
@TransformationDetail 9 ай бұрын
@@LowTechGarage Ah! Yes! I already forgot about that part of the video where you said it comes already mounted and machined. Looks great. I'll look at going this route. Thanks!
@goldenzaps2737
@goldenzaps2737 Жыл бұрын
I got a quick question. When you go on the mina gallery webpage and order one of these products it asks you what the model of your jagaur is. I'm fairly confident mine is the same as yours because it also has the same V8 supercharged engine with the same look, but i was wondering what you put down for the model type because i'm honestly pretty lost on the different model types of the lovely xj's.
@LowTechGarage
@LowTechGarage Жыл бұрын
I have a 2000 model year. X308 chassis. This is the link I used. I hope this helps. minagallery.com/performance-items-5/
@brendanharvey3583
@brendanharvey3583 11 ай бұрын
Im thinking about buying a 2005 xjr for a first car. Do you like the car? And how would you rate its reliability.
@LowTechGarage
@LowTechGarage 10 ай бұрын
Reliability is good. Spend the money and buy one with as much maintenance done already. The biggest issue people face with these cars are deferred maintenance. Hoses that should be replaced. Suspension bushings that need to be replaced ect. The 4.2 engine and zf6 is a great powertrain and the aluminum body jags are lovely. We had an 04 VPD and loved it!
@gregdettling6693
@gregdettling6693 2 жыл бұрын
@ low tech garage How much do you think you were able to bump up your hp and torque by installing this after market new alternative cold air intake? Has your zero - 60 mpg improved even more so?
@LowTechGarage
@LowTechGarage 2 жыл бұрын
Butt dyno says 10-15hp. You can hear the supercharger a lot more. Check out latest video for example.
@gregdettling6693
@gregdettling6693 2 жыл бұрын
Thank you for the quick note... 10 to 15 hp boost. Nice. My JAG mechanic is back to work on Monday after a long wait. Sometimes good things take time. I’m sure he is pretty good with JAGS. One of the only people that can work on them in town. It’s a very small city. I’m delighted he will finally be back soon after his holidays back in central Continental Europe where he is originally from. Speaking of hp and torque I was looking at specs for 1980s FERRARI TESTAROSSAs and when new they had about the same hp and torque as the late 90s easily 00s JAGUAR XJRs and 0-60 was almost the same or slightly better. Pretty FAST. That was on their 4.9 V12 Kind of impressive for a 4 door British sedan. Almost the same hp. A 1989 FERRARI was slightly better in the area of hp. 370 hp compared with 385 hp I believe it was. About 15 more. Yes, you can definitely HEAR that supercharger after what you did!!!! From Greg Dettling
@gregdettling6693
@gregdettling6693 3 ай бұрын
Update That took 1 year, 5 moths and 3 days The mechanic got fired Two technicians got fired working on my complete engine replacement. My winter tires got stolen from staff at the shop. And I got a call from police about the shops test driving practices. I got my car back and we called it good enough…Even Steven I had to fix the transmission myself after that. And do a few costly things to get her up. But it is mine once again. :) 84 hours drive to get to Toronto!
@brandonherrera2891
@brandonherrera2891 3 жыл бұрын
Out of curiosity, have you checked your AFR's at wot? Great video. I found the install pretty easy. Had those same issues. But easily worked around.
@LowTechGarage
@LowTechGarage 3 жыл бұрын
We have not measured the AFRs although it would be interesting to see. I know the ECU learns over time and adjust the fuel trims ect
@brandonherrera2891
@brandonherrera2891 3 жыл бұрын
@@LowTechGarage I have an 02 xjr. Had another 02 xjr a few months ago. They both showed lean under full throttle. But ran fine and no power issues. Just scanned another 02 xjr a few days ago. Same thing. Lean at full throttle. No running issues or codes on either cars. My personal xjr, I ran a fuel pressure test(it has new fuel pumps and fuel filter) and pressure is spot on wot. I have a pulley and exhaust for my car. But haven't installed it cause it shows lean afr. Since 3 cars showed the same, I'm starting it's false info.
@martply1
@martply1 2 жыл бұрын
How is gas / torque ? Better .
@LowTechGarage
@LowTechGarage 2 жыл бұрын
Butt dyno says slight improvement. Follow our upcoming head gasket series. We will be providing insight the the overall improvement from the intake, pulley, IC pump, and IC.
@oldasrocks9121
@oldasrocks9121 2 жыл бұрын
The Mina actually reduced the horsepower on the XFR 5.0
@callumduncan6728
@callumduncan6728 3 жыл бұрын
really important you are putting way more air in with the supercharger pulley but you have not increased the fuel this WILL damage your cylinder heads and overheat your engine you need a wide band O2senser to tell your air /fuel ratio . A nd by the way mina gallery is cosmetic crap look at the dyno runs of the later xjrs to see how bad they are , bottom line is you add more air you HAVE to add more fuel or bad things will happen
@LowTechGarage
@LowTechGarage 3 жыл бұрын
Thanks for the input. Our understanding is the engine management will adjust fuel trims to accommodate the additional air coming in.
@cirquedumike
@cirquedumike 2 жыл бұрын
That breather hose that goes to the valve cover is poorly designed. Mines separated and it caused a vacuum leak. Had to order the new design they just came out with. So much better!
@LowTechGarage
@LowTechGarage 2 жыл бұрын
Was the new design by Mina?
@cirquedumike
@cirquedumike 2 жыл бұрын
@@LowTechGarage yup! Im literally getting it in today :-)
@martynj-c4965
@martynj-c4965 Жыл бұрын
That's pretty poor engineering to have to fettle around so much. The company need to look at all the issues and sort them out.
@LowTechGarage
@LowTechGarage Жыл бұрын
Low production parts for ya
@cromagnon305
@cromagnon305 3 ай бұрын
That kit is crap. I would be embarrassed to put my company name on it. That shield isn't doing anything, just some abs plastic with edge guard. Nothing fit properly. I would have sent it back. I dont own one of these cars, so i don't know if it's possible, but if i had one with this kit i would scrap the box and look for a generic intake on ebay with a 90 and a similar diameter and send that filter down into the wheel well. You'll still hear the whine and get some actual cold air with it. That filter probably needs to be oiled as well.
@LowTechGarage
@LowTechGarage 2 ай бұрын
Thanks for your opinion
@joeboonen7421
@joeboonen7421 2 жыл бұрын
Sorry that kit looks like junk, Nice shiny pipe though. I would just about guarantee that the original filter would flow as well. Plus that heat sheild is junk . google flow with a pod filter. Engine masters did a good vid on different filter combos.
@LowTechGarage
@LowTechGarage 2 жыл бұрын
Thanks for the info
Replacing a Headlight on the XJR
21:30
Low Tech Garage
Рет қаралды 6 М.
STAY COOL!! HOW TO MAKE A DIY HEAT SHIELD
16:01
GARAGE THINGS
Рет қаралды 140 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
Jaguar XK8 Mina Performance Intake Install
6:30
GSM Workshop
Рет қаралды 9 М.
$1,000 Jaguar XJ8 RUNS AGAIN *Completely Re-Timed*
23:24
WatchJRGo
Рет қаралды 137 М.
Jaguar XJR Supercharger Snout Replacement
16:41
Low Tech Garage
Рет қаралды 18 М.
Jaguar F Pace S Mina Gallery Intake installation and POV
16:45
Jaguar XJ and XJR Buyers Guide
36:56
Low Tech Garage
Рет қаралды 102 М.
Jaguar XJR Intercooler Pump Upgrade
30:25
Low Tech Garage
Рет қаралды 7 М.
This is what an Open Air Intake does to a Supercharged ENGINE!
15:29
Richard Hammond has bought back the car he regrets selling!
16:10
DRIVETRIBE
Рет қаралды 1,6 МЛН
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН