Installing the Upgraded FUEL SYSTEM in the Drift Truck!

[@baileywestby]

you need to do something with the plastics they're looking pretty shit compared to the rest

[@Wutoilpansdar]

He got further in to this build than the fc

[@dill5500]

Itz_ Darwin how that ran

[@MetrohMan]

Well i mean he literally did nothing to the rx7 so yah. Paint and rims really dont account for much

[@marcellvarga4569]

Brandon Harrington shifter steering wheel, seats, coils, brakes, rear steer delete, welded diff

[@MetrohMan]

@@marcellvarga4569 lmfao oh my bad "all of that" done as well. Steering wheel smh...

[@dill5500]

Itz_ Darwin you've never painted a car huh

[@timothystrunk7323]

Clean up theframe n paint it

[@G0bz]

Knowing Gingium, I was actualy very surprise he didnt painted it at first!

[@jesse291]

keep the fuel tank in the middle of the car, that way you dont have a different ballance with full and empty tank!

[@ninjacookies0]

Jesse De Rooij That makes sense but I also think that since its a drift car he probably wont be running it empty or near empty a lot since he will be able to come in after every run and top off and not lose position like a race car has to worry about

[@dill5500]

Need more weight in the rear tho rhe rear end is super light and would probably make him spin out easier

[@DinoArmy13]

just throw sandbags in the bed no need to over complicate things

[@ilikeboost4764]

ninjacookies00 actually you keep it near full so you don’t get fuel starvation.

[@sergeantspeed5941]

Bumper tap explosions for the win

[@andrewrobinson3560]

I just watched over a bunch of old videos and the channel has really improved, I am so glad you have stoped using hot glue

[@benjamin8558]

Old videos as in Forza videos?

[@conman1395]

• Benjamɪn • yeah he's so glad he stopped using hot glue in Forza

[@benjamin8558]

same tbh

[@Atomicneko3000]

The amount of love and effort you’re putting in this build is really inspirational and motivating! Stuck in a position where I can’t get a license but when I do, modifying cars is something I really look forward to

[@ricerocket_ed6650]

What do you call Gingium after marathoning Netflix all day? Bingium

[@redsquirrelftw]

Gingium should make a Netflix show: "Ginger Things".

[@vasili3326]

ricerocket_ed6 I want to bingium ginger things

[@vehielphantom4116]

speaking of netflix. THOSE FUCKING ADS ARE FUCKING ANNOYING.

[@guni7197]

*3:06** I thought my phone lagged XD*

[@connormartin5711]

everyday when I wake up I look forward to this build, thank you ging

[@Wabeeninc]

Gingium and slap train uploads project car vids same time... noice

[@thatbajancarguy6580]

yh

[@kapys1722]

Who still watches slap train and his just tap shit

[@greenteagabe]

IM SO EXCITED FOR IT TO FINALLY START DRIVING!!! This is literally my favorite build anywhere on KZbin.

[@BlazingToxin1]

Not going to lie, pretty jealous you found one of these that's this mint. I owned a '93 B2200, I had done a bunch of suspension mods, little bit of stuff to the engine and mine was a nightmare. Having been driven every winter in Canada since it's birth, the thing was quite rusty underneath, also having 330k km, the amount of oil it burned was disgusting. All in all, I'm happy you're taking care of this thing and I can't wait to watch it finally drift.

[@carljenkins7354]

Looks good, good work on the fuel pump, proves what you can do when you're serious about doing a good, clean job.

[@corey0189]

You should also tape over new paint when you’re drilling it so it doesn’t become damaged

[@connoisseuroftigolbitts]

He’s half way their, I enjoy guys like this man, He gets the job done

[@christianh.2950]

This truck is coming together so well. I can't wait til it's finished.

[@Wortokua]

Hey Caleb, when you finish all the work, do a livestream for mounting the engine for the final time and the first start up. Put cameras around the shop and do a 3-4 hour live stream for the end of this build! i think it would be awesome and i think most of the fans would want that.

[@sirus0678]

The top project vehicle on my subscription list! Can't wait to see it fire up!

[@redsquirrelftw]

Looking good, and getting there! Lots of working going into this build.

[@mikee4571]

I’m always inspired to do stuff to my car after watching. Thank you Gingium, I look up to you bro

[@andrewapel5401]

I like lake inspired's music, and I have been watching the both of you guys grow for a while. Keep up the good work, loving this build!

[@PRJCTMYHM]

Can’t wait to see this up and running sliding and banging doors!

[@southerntiessxs1515]

The progress your making on this build is awesome ! Keep up the good work ! Loving the content

[@jf8772]

Not first but damn close, the minitruck is coming out awesome. Keep up the good work Caleb Peace from Lake County IL ✌️hope to catch you at a windy city Miata this year.

[@misterdavid571]

You should do a tools box tour/review, in depth.. with YOUR organization, it’d be interesting to see what you have/use!

[@michaelovitch]

You need oxygen to get an explosion. fuel pumps are submerged in fluids,or in fuel vapors. You need a really specific ratio of gas/oxygen to allow a combustion,or explosion. So even sparks are not that dangerous in a fuel tank.

[@BoostDreamer]

I’m loving these builds and I don’t even own a truck. Good work you’re putting out bro

[@AaronBonBarron]

The black engine bay really doesn't look too bad in gloss, I like it!

[@nopers2223322]

Great production work Caleb

[@alexaguiar9775]

I love your videos and so happy that you have a better shop to work on your cars!

[@vedrankoturic12]

She's shaping up nicely, good on ya.

[@daltonbauer2053]

best bet for putting nore weight in the back weld a pretty hefty steel plate in the bed right above the axle and of course keeping it as centered as possible

[@kaloyankirov1904]

This channel and it's content builds and etc i so awesome I've learned so much about cars and this inspires me to start my own project car i hope i can

[@egardner5978]

After every video I watch, I am less and less afraid to tackle my own build someday.

[@fawoo_4235]

Another amazing video my dude! keep up the good work!

[@TheSpazinChaz]

Every video just gets me excited and makes me want to do something like this

[@chocolatelollipop3835]

Wow this is the earliest I ever been to watch your video, love the vids man keep it up

[@kennethl.884]

That "fuck, of course !" @ 6:15 killed me 😂😂😂😂

[@umerafzal482]

gingium if you wanna grow your hair back use olive oil on your head, it will thicken your hair and make them stronger, my brother started balding and he used olive oil and it stopped balding

[@jarydmccarty9217]

You have to make sure it's the right type of regulator. Most cheaper off brand ones don't support a return style system. I believe you need what's called a bypass style, and most cheaper ones are blocking style. Love your channel and the build. 👍

[@_Gingium_]

This one has a return line!

[@jarydmccarty9217]

Is it a universal style? Where did you get that one?

[@9jason]

Keep up the good work!

[@eagleguy7]

9:41 Axel is going to become the next Scar...playing with and killing vermin.

[@jeotep]

You could always just test the fuel pump by connecting power to it and putting a bucket under the open feed line. then you know for sure if it works

[@evansiegrist9292]

So hyped to see this drive

[@FreezingOasis]

Dude, clean up everything on the frame under the bed and run it like that. Looks sick!!

[@subzeroreborn12]

Just a tip incase you don't know but when you use hoses in a fuel tank you want fuel specific hoses. Radiator hoses will swell and dissolve inside gasoline. Hope this saves a headache later 👍🏻

[@lewisthompson5100]

Hi gingium hope your day is going well I really love your videos I’ve been subscribed since molly got the turbo your my favourite KZbinr keep up the good work 😊👍

[@lifeisgood7807]

keep the fuel cell in the bed of the truck with an extened roll cage going into the bed. that way its protected and is easy to access for fillups

[@jankrubner8166]

Love your work. Keep it up

[@bobbylaw3928]

New video just in time for lunch!! Day made! 🦅🤯👍

[@rickyekenlow]

YEY ! another Gingium video !

[@porfirioaguilar9187]

Cant wait for this truck to come out

[@chrisedwards6294]

That's a pretty wicked shackle angle. I'd be a little concerned about bending the leafs as there's not that much up travel before that spring hits the frame. Not sure if these trucks came with that steep of an angle or not. Otherwise great build! Been following it since the beginning , you've done a really great job!

[@tom3056]

Won't the axle hit the tank when you put weight in the bed? Or even when the suspension squats when you drive?

[@tyleralcover5901]

Tom Carrick i doubt it, its a truck do i would hope mazda would expect to have weight put in the back

[@tom3056]

Tyler Alcover yes, but the ford axle he put in is a lot bigger than the stock one.

[@AFXGaming]

you underestimate how strong leaf springs are

[@AFXGaming]

Tom Carrick most of the suspension play in a truck is in the front not the rear

[@nissancruizer]

When i saw the thumbnail i knew i had to watch it!

[@SurGhostly]

With the bed off and that drifting. Ohh 👌 just ohh👌

[@willwastaken]

It looks so sick without the bed. He would never need a turbo or supercharger with such a light car, lol.

[@Whitestorm2]

It would drift pretty poorly, no weight in the back

[@SurGhostly]

Whitestorm wel obviously he would weld a slab of metal in the back

[@Whitestorm2]

No trespassing On me Gotta cut the roof off the cab too, make it a convertible.

[@ftdoomplays]

Why not go with a fuel cell over the stock tank from the beginning?

[@lister2967]

FTDOOM I'm not 100 percent but I don't think that's possible as the fuel cell just stops the engine from starving as the fuel in the tank sloshes around xd

[@Johnny_OSG]

He also wants to make it running rather quickly and make all the cool but not necessary mods later

[@ftdoomplays]

xx_thehypedrifter_xx pros I'm talking about replacing the factory tank with an aftermarket fuel cell. Typically in racing applications involving trucks they set them up in the bed so it gives them easy access to their fuel system.

[@MetrohMan]

I wondered the same... put it in the bed for easy access.

[@ftdoomplays]

Jan Czech True. I'm just a do it once the right way kind of guy. But it's his project and a badass one at that.

[@shakkarnaqasha9566]

That black engine bay is going to get soo hot

[@jeromerobinson7576]

The sticker fail made me laugh way to hard 🤣🤣

[@darksoldiershot1478]

jerome robinson same 😂

[@yaseryakup6424]

I love this build

[@shawnrao]

Great vid!

[@BecauseMiata]

I'm glad to see that you soldered those connections. Hot glue gun would have been a bad idea.

[@greenespirit4973]

Im just here to say I bought fresheners for the second time yesterday im on supporter fire

[@_Gingium_]

Thank you :)

[@rogertheexplorer4347]

7:04 That lighting tho

[@zmaricz]

don't forget to paint when you drill holes or you'll get rust! even if you're using rivnuts

[@NewfieMan98]

Would have loved to see some more of the rx7 before you sold it, but this drift truck is gonna be so much cooler! I was honestly thinking about picking up a gmc sonoma to drift like last year. But you beat me to the idea.

[@anthyrapthor7731]

Love your vids 🚗

[@toothless_2v594]

Ginge, Sparks in a sealed fuel tank won't cause problems because the gasoline puts off so much... Well gas that there's no room for oxygen in the tank. No oxygen = no boom. Fuel pumps just like any other motor actually Sparks each time it is turned on and off

[@Patrick76496]

I prefer these 10-12 minutes long videos, because I'm struggling to get up with the great content :)

[@joenels4356]

I'm surprised it has a boxed frame from the factory...good job mazda

[@jeffmeatballdeep8554]

Nice work brah should of painted up the frame for a clean rust free look

[@lemuhnn]

7:58 Gingium Fighting Stance

[@coldheart9829]

Love the music

[@lukeolsen6549]

the stock fuel pump is most likely that large just because of old technology, my 95 mustang has one that big as well, and feeds more than enough fuel for the 302v8

[@christraudt6730]

i wish you would’ve gotten a walbro 450 pump or something similar... fuel system is something that people only want to do once and with gasoline you should be good for 700 wheel hp with a 450.

[@JeffWalker84]

RIP fly

[@Izravong11.]

Clean off the frame and paint it

[@LukeTheJoker]

Has anyone mentioned that what he removed was the rear brake load/weight proportioning valve not some fluid slow down thing like he described? He probably doesn't need it anymore seeing as he wont be carrying much in it, but it wouldn't surprise me if with it removed and no weight in the back it locks the rears first under hard braking now. Could be quite dangerous, specially in the rain...

[@brandoncaldwell95]

Better add some storage additives to the fuel. Having it sit longer than 3 months makes it gum up and clog. Also the water in the fuel seperates and it begins to smell like turpintine..

[@03canadianf5]

Those shackles need to be closer to vertical. The shackles are designed to swing rearward to allow for the spring to flatten and absorb shock loads. As it is, you won't have much in the way of that. Maybe considering fabricating custom mounts? I think the springs you're using are too long really.

[@ivanolivares7719]

Gingium when you make a roll cage make sure to connect the roll cage to the back chassis of the truck 1. It would look sick 2. It would give you more support just cut jokes in the bed and weld it to the bed!!

[@andrews420]

You should make the exhaust side pipes on each side straight from the headers

[@stevec7819]

it's gonna need some Kelford cams

[@ratundead45]

You can make it to the bed has latches so you can take the bed up and down

[@kim.w1471]

I Love your videos ❤️

[@jakegiles9916]

The best thing about your old shop was the cat

[@argxz4200]

Nice ドリフト shirt for a drift truck episode

[@drmoss_ca]

Possibly the only subscriber who isn't watching these videos about 'Battle Vans' and 'Drift Trucks'. Go back to Miatas and I'm on it again. Till then I have to say I'll go back to reading a book.

[@pinkfloyd1327]

Oh helllllllllllll yeah

[@arran3753]

Why not add a fuel tank in the bed of the truck, it would allow the axle room and moved forwards or backwards for weight distribution.

[@ThexGreatxLTS]

I would have loved to see you install that fuel pump in real time

[@Chuull1]

What are you going to do for adding weight in the back? You wont have much grip bc it so light back there. Should put a 200ib weight plate so its permanent added weight

[@dsrgarage]

Just wondered. Did you do anything with the master cylinder since you changed from drum to disc brakes in the rear?

[@Drewisyou94]

Should make a custom tray for the back man! Like we have for utes in Aus

[@Carnerd101]

Musky fine! (My phone's attempt at typing "Nicely done!")

[@Mark-hs7sk]

I love the red but you should totally paint it blue to match Molly

[@coolhands7498]

-i'd love to see front bumper in red color ♥

[@rntjake]

I know this is a Friday build but it make a damn good drag car

[@marnixhoogenboom3757]

If there is a spark you most likely won't go kaboom, cuz the fuel needs to be vaporized to be set on fire easily. When it's not vaporized it doesn't burn as easily I guess.

[@wottle-b335]

While the bed is off, it wouldn’t hurt to sand and paint the frame just for extra protection