INSTALLING THE V6 MOD KIT

[@rakibshahid7913]

Awesome work. Really appreciate the troubleshooting section showing which connection to fix. Will definitely be helping a ton of people!

[@sthetixofficial]

you are welcome

[@attila2946]

@@sthetixofficial where do you buy the modchip? Can't find it.

[@sthetixofficial]

try to dm me on Twitter

[@joaosidonio7562]

@@sthetixofficial discord?

[@riquelmeneymar5515]

​@@sthetixofficialcuál es metodo más seguro este que muestras en video , metodo 2 levantar memoria nand y soldarle un cable a la esfera o metodo 3 el kamikaze para ti cual el más seguro y que más recomiendas , espero respuesta saludos gracias y excelente video saludos

[@soundsonline796]

Great touch with the troubleshooting section. Great for anyone who has paid for a dodgy install and later had to repair. Much appreciated

[@Luisito0o]

This is hands down the best video tutorial on the internet. Great job! Sthetix

[@sthetixofficial]

thank you

[@TuncayAyhan]

Great. Just finished mine. Now it can teleport me from home to work. Thanks Sthetix!

[@sk8er4lifeez]

to anyone wondering the Dat0 has given me a 0.419 at the lowest and it still works. ive done about 5 switches oled switches and they worked fine. make sure to use quality wire for dat0.

[@sthetixofficial]

it is ok

[@PilliumRedius]

Thumbs up for troubleshooting help at the end. Makes me even more confident to try this out on my own. A bunch of my friends have OLED switch, i have 1 in box still and have been waiting for a good mod install guide. I also like how you provide guidance for the micro soldering. I was iffy on it, but what you showed makes it seem doable. Careful work, but doable with enough care and attention. Thank you!!!

[@douglascalixto9086]

I isolated the pads with solder mask before soldering the wires. Thanks for alerting us to the problems.

[@KefCantillo]

Uv mask?

[@douglascalixto9086]

@@KefCantillo yes. In the new model instinct (black board), there is not contact ground problem.

[@iakovosmarkoras4523]

Sthetix gives us the best videos everytime!! Very professional Thanks for everything you do for us

[@sthetixofficial]

you are welcome

[@rap-id-ralph]

Beautiful! Would almost buy me an oled just to do this.

[@BunnyB34r]

I've switched the faceplate on my switch before, so I figured this would be just as easy.... yeahhhhh I don't trust myself with a soldering gun quite yet! Wonderful tutorial though!

[@ultimatebreak827]

yea me neither lol.

[@Tomzak11]

Tanks this is the best v6 tutorial on the internet

[@sthetixofficial]

thank you

[@cursedtosufferGRIMM]

Well looks like I need to revisit this video 10 years later whwn Im not scared of electronics

[@___aaron.m7930]

I really wish this tutorial would have dropped sooner it’s great, unfortunately my install went bad a few days ago. I broke the RST pad and had to connect from the via near it and the switch just doesn’t boot no more

[@ShinryuZensen]

The via near it might no be the same line. You might wanna scrap the pcb a little near the RST pad to see if you can hook it to the trace that lead to the RST pad...

[@stevedave70]

Thanks for listing the prereq's. It helped a lot. Video is good as well.

[@xDaRkModEx]

Thank you very much for this great presentation on how to install this mod kit. I successfully installed my mod kit on the OLED with my novice skills. Next up lite 🤣😅

[@leomelfrancisco6036]

Hello there! How did you check if your modchip has already flashed? Bcoz mine didn't reconized or poped-up when i connect it to pc.

[@xDaRkModEx]

@@leomelfrancisco6036 I didnt check at all. Just sent it and it was already flashed.

[@azonestudio]

Ini adalah video tutorial terbaik yang pernah saya lihat, langkah demi langkah d jelasken dengan jelas, terimakasih , dan sukses selalu

[@sthetixofficial]

Thank you gan.

[@masteroftheconsoles]

Thanks so much for the tutorial. Just used your video as a guide to install my Picofly and got it working on the first try!

[@Rurounik99]

One more sub, the best video you can find. Thanks and greetings from Brazil.

[@sthetixofficial]

you are welcome

[@herfordkingsly7979]

You the man! used this to get a rp2040 going on an oled no one else had the good videos

[@vxox2195]

YOU ARE THE 🐐 GOAT 🐐

[@setsamidori8666]

Rapi banget bang, puas banget nontonnya. Serasa bisa sendiri. 🤣

[@sthetixofficial]

mantap 😁

[@Blue-jn1ph]

Wow that is actually more complicated than I thought. I was thinking of selling my v1 switch and buying an oled and modding it myself, but maybe the prettier screen by itself isn't worth it 😅

[@Koyakami]

I thought the same thing ha! *see's this v6 chip* hmm what is it? *researches* cool, sounds good, I'll check a vid how to get it working. *Watches this vid* sweet jesus, nevermind. Thanks for the vid though! Will def help alot of people :D

[@Random_4400]

So easy

[@numba2dad]

@@Random_4400 it does look easy right? have you done it yourself?

[@13gta]

​@numba2dad yes and it's not easy. First few switches I would use the flex cables provided by manufacturer of mod chip. I decided to just run leads from one end to the other end as this is easier. It's honestly not that hard now though. Still I run into trouble shoot issues at times. 2 oleds 3 lites and 2 switch dead from attempted mod and now I can confidently do it with out messing up. It's definitely not easy though. Learn how to micro solder and get a microscope camera for this.

[@robinrai4973]

Just for the record, my B/RST pin measured as open loop, but everything still worked. I checked every pad and trace connected to it haha

[@sthetixofficial]

The B / RST value depends on the multimeter specs.

[@robinrai4973]

@@sthetixofficial I've done two OLEDs now with the same multimeter and the first one did get 2.9 while the second read nothing just for that pad haha, a bit weird but hey they both work!

[@user-mo6qo7vj6t]

Thx i just wonder why i couldnt measured it

[@sthetixofficial]

it depends on the multimeter specs

[@nazolon]

the best tutorial on the internet!

[@IceofDream.]

I love your work and the music 😆 Unfortunately I'm not sure if I'm skilled enough to do this but hopefully if i will in the future u will using this guide

[@sthetixofficial]

thank you

[@skylogmalaysia]

thanks. manage to did my first oled using ur video. i screwed up bridging the sp1/sp2. the console doesnt turn on at all. i thought i was a goner. fortunately i read through some post on gbatemp and found out the issue was the bridging.

[@thomasdupre572]

Thanks for your video, it is well explained and the image is clear. I've done two OLEDs thanks to you, but on both I had no reading on B point (OL on diode mode) but after checking and doing the soldering again still no value, I gave it a shot and it worked just fine. For the second switch I had 480mV on the DAT0, i tried reseating it several times but best i could get was 495mV... I tried it and altrough the training was a longer than the first it works like a charm.

[@sthetixofficial]

You are welcome

[@jeikWazTaken]

Thank you so much for this video and making the steps, in my opinion, as clear possible. Keep up the great work!

[@sthetixofficial]

thank you

[@senkosalihbegovic]

I was excited to install this because FPCB kit made things much easier. What's the percentage of failure/interference issue happening? If it's less than 100% I'd rather go with FPCB :)

[@sthetixofficial]

You can install the kit if you intended to do it for yourself. it is far below 100%

[@senkosalihbegovic]

@@sthetixofficial Beautiful, thank you! I don't have much soldering experience but I did mod a switch lite two years ago on not so ideal equipment and it went well. This time I got good equipment and am ready to mod the oled. I'm getting two new zelda oleds and will be doing the mod on both. I'm very excited to do this. I have watched several videos many times. I have watched this one about 4 times now, gives me a lot of confidence the more I watch, I basically know the procedure so well by now that I could do it blindfolded (figuratively speaking ofc haha). Keep doing what you're doing, this video is pure gold!

[@sthetixofficial]

thank you and good luck for the project

[@SergipeCycling]

I need to learn micro soldering ASAP.

[@Ansigo]

A heads up to not put the mod chip too close to the Tegras cooler, if you do or have to too much pressure the modchip won't work and your switch won't boot.

[@sthetixofficial]

yes of course if you put it too close, then the cooler might shorting to the components on the modchip. thx

[@kraebvr]

​@@sthetixofficialhmmmm had just non conductive tape existed

[@gabryares2106]

Always the best mate

[@paulzeev]

Best vidoe tutorial! Best music as well thank you

[@sthetixofficial]

thank you

[@nicolabernacchi9971]

Someone knows what is the resistance on the A point at 11:40? I broke the resistance and want to replace it because the pads underneath are still good

[@sthetixofficial]

It is a 4.7K ohm resistor, 0201

[@aggarwal959]

Best as always

[@rolen47]

I remember soldering a modchip in my PS1 back in the day, it was much, MUCH easier because the components were much bigger. These solder spots look so tiny I know I wouldn't be able to do it myself.

[@sthetixofficial]

you are right.

[@JamsGrove]

Thanks for the awesome vid! Any specific reason you did not solder the ground pad on the modchip?

[@sthetixofficial]

No need because the CPU flex contains the GND signals

[@robinrai4973]

Easy peasy, thanks to you :)

[@notOEAH]

Nice I'm going to install one tomorrow

[@RetromaniaGamers_64]

The same thing happened to me but I had protected the 3.3v line with a UV mask, I was charging the console and after 15 minutes the console no longer wanted to turn on, but in my case it was a picofly, the picofly was replaced and it came back to life. console, the short was on the 3.3v line

[@nickwaters2802]

Amazing video! How do you mount your overhead camera? What camera do you use? Thanks

[@sthetixofficial]

i used something like this glidegear.net/products/glide-gear-oh100-professional-metal-overhead-table-top-mount-stand-studio-video-camera-top-down-platform and a microscope that can record

[@37Kilo2]

Does the V6 ever need to be reset, and run the learning process again? I know in an older revision you installed a magnetic reed switch in order to reset the chip without disassembling the console. I successfully installed a V6 a few weeks ago using your previous video guide.

[@sthetixofficial]

no need

[@ethansnyder5515]

I have a question that I haven't been able to find an answer for: do these modchips work with Hong-Kong versions of Switches? I would think yes, but I know the input voltage is slightly different, so I wonder if that makes enough of a difference component-wise. Thank you if you can help answer my question!

[@sthetixofficial]

it works for all compatible consoles

[@ethansnyder5515]

Thank you for the reply! Just wanted to make sure before I bought it! Keep up the great work man, your videos are invaluable! :D

[@luke2415]

hey there, I tried to install mine last night and I'm getting an led code that I can't seem to find anywhere. 2 short red blinks, 3 short green blinks, a short white blink, 2 purple blinks, and then the chip flashes as if it's training, then turns off and does nothing. nothing happens on the screen during or after this process either. my solder joints are kind of jank so later today I'll probably try and redo them or use the flex cable instead, but I figured I'd ask. thank you for the vid! btw, I see you didn't solder anything to the ground pad, is that necessary or is the ground pad not needed?

[@sthetixofficial]

Check your soldering again / check the chip if there are some out of place components. Ground pad is not necessary, just follow my guide and everything will be OK

[@DaOptimus1]

Nice guide

[@RodGSilva]

Thanks for all the guides, I really appreciate the content. May I ask since you stopped doing the reflow on the MMC how is the return rate of Oled with just the pressing the DAT0 adapter method? I had to rework one I did like a month ago.

[@sthetixofficial]

return rate is much lower than the reflow method. FYI, the friction method works still 2021, so I believe it is the best.

[@cryangallegos]

Honestly the only part that scares me is getting the CLK (D point) soldered correctly. Exposing traces isn't my strong suit.

[@vanakyoung168]

thank you so much my Friend

[@samuraivader3814]

I'm thinking about doing another mod like this. I think I'll do the Hwfly again while this new one matures.

[@poopmaster]

Which tutorial of your's do you recommend? I ordered a v6 chip yesterday and am excited

[@sthetixofficial]

this one.

[@FRESHhitsss69]

What will happen if you don’t update the switch before installing the mod chip ?

[@sthetixofficial]

u can update it later.

[@Funkb0y]

No ground point? Maybe I missed it. The previous chips would have the ground routed usually to the other side of the caps we pull the 3.3v from. Are we getting ground from sp1 and sp2 connections instead?

[@falkerify]

Correct, from cpu cable.

[@LonzoTube]

Very nice video, why do you not tin the leg on the DAT0 adapter that goes under the emmc? It is Needed only if you are going to reflow?

[@sthetixofficial]

if you use the dat0 adapter, it is better to tin it. reflowed or not reflowed, it is important to tin it first.

[@ranma99vn]

Thanks legend as if ur video come out 2 week ago i will have an idea with my D point, it give me a trouble to find what is not working even though i got the right value using multimeter later on find out the solder from the flex issue use jump wire straight to the chip problem sove

[@quantum2676]

Is the Instinct NX V6 Hwfly modchip kit for Lite, V2, and OLED or the modchip kit in the video made with the RP2040?

[@sthetixofficial]

it is not pico.

[@mac2939]

Can somebody please help me with a link for the instinct mod chip and the v2 one for the older models tysm

[@ns2m645]

gan pake pasta apa agan? dan bisa tidak make pasta grizzly kyro soalnya sisa dri pasta prosesor

[@sthetixofficial]

GD900 gan. bebas aja kalo mau pake merek lain asal jangan pake liquid metal

[@af6727]

Great work. I noticed that you installed the dat0 adaptor directly without cutting the two traces. You no longer do it?

[@sthetixofficial]

I don't because the dat0 adapter is fine now

[@af6727]

@@sthetixofficial You're the real deal. People keep complaining about getting a bad dat0 adaptor. What seller do you recommend I buy them from?

[@sthetixofficial]

I got it from the instinct-nx seller, it comes with a v6 version dat0 adapter.

[@abdullahrex4769]

I wish I can just buy this kit, Ill go right ahead and mod my OLED

[@bjornvanhemert6569]

At 12:06 I Bridget both caps and can’t get the solder removed. It does seem that both are 3.3v, do you think it matters?

[@sthetixofficial]

it is ok

[@potchary8366]

And just like that I’m not that opposed to PC emulation anymore

[@erraddict]

At 26:56 it looks like you added a ground wire to the chip. Is that required?

[@sthetixofficial]

it is not needed. I soldered the wire to debug the chip

[@wn6988]

What temperature do you use to solder the mod chip and everything including on?

[@sthetixofficial]

I set it to 400c

[@antoniomoraavalos9120]

Disculpa, estuve buscando en tu pagina los diagramas de este instinct v6 Ya que lo instalare en mi oled siguiendo tu video Pero encontre de varios mas Pero no del instinct v6 Mi pregunta es... Subiras alguno? O ya si ya lo subiste donde lo encuentro? O no subiras diagrama de este? Por favor, el video es incrible Pero un diagrama tambien me ayudaria mucho ya que experto no soy Si pudieras te lo agradecería muchismo.

[@ppixxxels4159]

Do you have a video where you show how you created your emuMMC alongside the mod chip?

[@sthetixofficial]

please watch the hats ama video

[@user-vn3no2lm8v]

Thank you for the good video. It would be nice if I could install a magnetic switch on v6 too, but that's too bad

[@sthetixofficial]

no, there is no feature like that on the v6

[@imacoustict]

Do you think I could do that? I have no experience in micro soldering but I don’t want it to get modded for 200€

[@sthetixofficial]

no. you better ask someone else to do the mod for you. You are risking your console for more than 200 pounds if you have no experience in soldering.

[@imacoustict]

True. Thank you 🙏

[@airquis]

Is kapton tape absolutely necessary?

[@frandoruscarlet]

dang, you use a lot of IPA cleaner! Good thing it's my least favorite kind of beer. Can't wait to dump beer all over my brand new Nintendo Switch : D ebin

[@sthetixofficial]

yes I use a lot of ipa or cleaner to make the installation clean

[@joyemu]

i bought the awg 36 copper wire but it is so small what gauge was the wire you were using ?

[@sthetixofficial]

awg36 UL10064 teflon wire.

[@maxm4451]

Excellent! I need an opinion. To date, for you, what is the most recommended chip to install and why? Thank you.

[@sthetixofficial]

Instinct-nx because it has no issue

[@maxm4451]

@@sthetixofficial Thanks!

[@maxm4451]

​@@sthetixofficialFinally, I got the Instinct-nx but with a black board. And I see that it has two B points, one at each end. Do you know which one can be used?

[@sthetixofficial]

any of them is fine

[@maxm4451]

@@sthetixofficial Perfect!

[@erickflores689]

good video, i have a question, how i know if the cable is the bes to make the jumpers ? i cant get the awg36. Thanks for the help.

[@sthetixofficial]

what cable?

[@erickflores689]

​@@sthetixofficial thanks for the answer, i have other question if in point 3.3 did get my .940 is it ok ?

[@sthetixofficial]

it is ok

[@erickflores689]

@@sthetixofficial thanks so much, it is work now

[@erickflores689]

​@@sthetixofficial i appreciate that u take the time to answer my question, but i have another question if i want to play online, can i use "ofw" to play online ? Thanks again for the anwers.

[@brond.8009]

nice video

[@7356205]

I get high readings on my D point. I tested the D point on a new unused mod chip (connected to nothing) and I still get high readings. Are these mod chips just bad? Can’t get them to work on OLED switches I’m getting some flashing colors but just solid white light then boots to OFW maybe the system needs to be charged? Not sure

[@sthetixofficial]

check your oled installation again on the D point, it is not connected!

[@7356205]

@@sthetixofficial thankyou. I started getting a good reading but mod chip still acting weird. I replaced the chip (I probably ruined it) everything going smooth now

[@H.O.79]

Hi, Thank a lot for the video! Yesterday i installed a picofly v6 and all worked fine. Today I have problems: hekate starts with the error message: Missing LP0 (sleep) lib/ and when I try to start in OFW, I get a blue screen. Can you give me a tip on where I should start troubleshooting?

[@sthetixofficial]

your pico damaged your console. dont use pico..you need to use instinct-nx and unbrick it.

[@H.O.79]

Thanks for your reply. Damn, I didn't know that before. You are repairer? Can I ask you which region you live in?

[@sthetixofficial]

I am in indonesia

[@umbertoaltieri8977]

What is the difference between V6 and V6S black? Can I install the V6S black following this same guide? Thanks.

[@sthetixofficial]

you can. the v6s is the v6 successor.

[@jangshikkim4069]

thank you for a great tutorial. all can be managed by 36awg wire?

[@sthetixofficial]

yes.

[@jangshikkim4069]

@@sthetixofficial thank you. one more question. i scratched the clk point with a needle. from the looks it looks like the pattern is damaged. when i check with multimeter at the end of the clk point(circle) i get the correct reading(0.788). if the pattern is damaged, will i still get the correct diode reading from the end of the clk point?

[@sthetixofficial]

that point is a bridge between the cpu and the emmc. if you break it, the multimeter will still showing a value but it will be a false one. because you might be reading from one side only

[@caner3866]

Firstly thank you for this great video! I got issue. When I try to open OFW I’m getting purple screen, when I try to sd partition I’m gettin this error “failed to init emmc! “ What should I do? Thank you

[@sthetixofficial]

i think your emmc is damaged. did you reflow it?

[@caner3866]

No, I didn’t. I’ll check connection and update you.

[@blankebob-jo1zs]

Good video, but my solder iron is to big. What temp are you solder? My 0.5mm tip is on the way.

[@sthetixofficial]

i always set it to 400c

[@blankebob-jo1zs]

ahh oke i thought i was to high. i swrewed up a brand new oled@@sthetixofficial

[@KuraV12]

Why do you always blur the switch logos and everything in the switch related vids?

[@sthetixofficial]

The Ninjas ..you know who they are

[@KuraV12]

@@sthetixofficial aaaah ok 👍

[@zV1pi]

Hello Sthetix. I love your videos keep the great. Btw I am modding a Switch oled with instinct nx v6 and it blinks purple then stable white for some seconds and then boot OFW. I didnt find the led colors for it, do you have any idea?

[@sthetixofficial]

usually there is a short somewhere or lose solder connection

[@lucasribeiro3871]

Nice!

[@g0rgeos]

Subarashii, sukses om

[@FatalErrorX]

SPEAK ENGLISH

[@sthetixofficial]

makasih

[@jwatch3825]

Awesome video. How come you didn’t add the magnetic switch this time?

[@sthetixofficial]

because the v6 doesnt have that feature

[@colinzimmerman5362]

Where can I get the modkit?

[@abdull8736]

too many hwfly out there ! what do you recommend for oled switch ?

[@sthetixofficial]

you can use the v3, v4 , v5 or v6

[@abdull8736]

@@sthetixofficial thank you so much buy what do you recommend?

[@sthetixofficial]

i use the v6 now, but you can always use the V3 up to V6.

[@abnerb88]

Hello, great video. Thank you for this. I have a question, first time installed the chip, booting light goes green, then goes purple 3+2 times and then white 10 times and goes off. I need to re-attach the battery cable to start again. Also doesn't boot to OFW. What it can be?

[@sthetixofficial]

recheck the soldering / pads. either it is disconnected / short. remember the solder mask is too close to the pads.

[@junimercs2183]

Hi. I accidentally updated my moded oled with hwflyv6. Updated on ofw with 17.0.0. Now my board flashes quick whites then boots on ofw. Does it mean my atmosphere is incompatible with the switch ofw version? You should make a tutorial about the update for modding community. Thanks!

[@sthetixofficial]

Please try to reset the chip with putty kzbin.info/www/bejne/j2HHfGCbacpkjck

[@bartskuchiki2649]

Hello, i did all up to the point i plug a charger to the usb. The led won't blink and switch is black screen. I just used a generic phone charger, do I need the switch charger?

[@sthetixofficial]

u need the original switch charger and check your soldering points

[@bartskuchiki2649]

@@sthetixofficial thank you I will try that. All the joints should be good. Sorry another one, do I need to program the chip or is it preprogrammed already?

[@bartskuchiki2649]

@@sthetixofficial also my readings were 0.800+v on A, C, D and 2.9v on B.. also I saw on your github diagram i shouldn't solder the Gnd point?

[@sthetixofficial]

what chip do you use?

[@bartskuchiki2649]

@@sthetixofficial i use the instinct nx v6 for mmodding the oled switch v2 mariko

[@fatburdo]

My good sir, love your videos, can you help me? My dat0 feels well seated, I tried removing and placing it multiple times, but my diode reading is always and consistently around 0.96~0.98V. SKhynix chip. What am I doing wrong?

[@sthetixofficial]

it is ok

[@fatburdo]

@@sthetixofficial Thanks! Finished my install and I'm getting an error, it blinks fast: red, yellow, I think white, purple, then solid white for a couple seconds, and then off. Not to OFW, just black screen. My D point was giving me a high reading, around 1.6. Had a hard time with the D trace, but then it'd be shorted right?

[@sthetixofficial]

you might damaged the D point or something else.

[@isaacjulianmoraathie9332]

Do you know if this is compatible with all models? V6 Core,lite and oled

[@FRESHhitsss69]

Yep

[@therealrando]

This video makes me regret selling my unpatched 2017 switch for an oled 🤦‍♂️😭

[@eduardosilvamartinez5748]

Hi, really good guide, I've installed my mod chip un a OLED switch and everything seems to be fine (all the solder points measure between 600 and 860, but I'm getting 1 blues flash then 2 yellow flashes followed by 2 more yellow flashes after some seconds, according to the Github repository that means that the rst is having issues, when I put the multimeter it mesures about 1.2v, what can it be? I'm thinking maybe it's the cable I solded is too thick but i'm not sure, also the console is not booting to the OF after the error codes, any help would be appreciated!

[@sthetixofficial]

maybe you damaged some signal track. check it again

[@supermario9545]

Reet Switch Installation left out this time because there is no solder point available?

[@sthetixofficial]

please watch the putty guide on my channel

[@WarlockSRB]

Thanks for this... Could you just add additionally if it is possible to update OFW after mod is already installed... currently we are on 16.0.2, but if new one comes :) Thanks and keep it up...

[@sthetixofficial]

you can, kzbin.info/www/bejne/apvaZaGvrtKKncU

[@SwitchBros.]

Incredible good content! God of Modchips on it's way 😍 So you would say to grab a hwfly chip over a instinct-NX at the moment, right? After this video watching a real professional soldering this chip I have to say that the instinct-NX looks really promising! Not like some I watched 🤦

[@sthetixofficial]

no. I mean, grab the hwfly or instinct-nx, instead of the improper pico

[@SwitchBros.]

@@sthetixofficial then I just misunderstood 😂 So I can go with instinct-NX? Your video is showing a really good new alternative to hwfly and I think they thought allot about the software/firmware!

[@sthetixofficial]

yes you can buy either the hwfly or the instinct-nx. just dont buy the DIY style pico, it is dangerous to use and a lot of people have bricked their console because of it.

[@SwitchBros.]

@@sthetixofficial wasn't my intention to do that! Pico was never on my list (even or because it's too cheap!) Before instinct-NX I always thought: go with hwfly! It's so long on the market and got better and better!

[@rakibshahid7913]

@@SwitchBros. True, but this v6 instinct-NX is really fast but again at the end of the day i dont think waiting for a second or two turning on the console will kill you lol

[@xpgvideogames8325]

Hi did my 1st V2 switch with a black oled V6 chip, I didn't have the emmc clip so I used wires. All points measured in the correct range...when I turned on the switch it pulses yellow for a minute then purple for 30 sec the 3 red then boot to the ofw when i turned off the switch it does the same pulse sequence after powering down. I tried the C and A point on both the emmc chip and the motherboard according to your diagram and it still does the same pulsing sequence. Can you tell me if there's anything else I'm might be missing?

[@sthetixofficial]

try checking the dat0 connection. Can the console boot to the OFW when all wires removed?

[@racym1553]

My kit comes with a micro usb female socket. What is it for ? Great work btw

[@sthetixofficial]

I never seen anything like it. but probably it is for updating the chip

[@TheBassUnlimited]

Hello. I’m not getting any voltage from test b. Desoldered and resoldered new cable and tested directly from point and no power. Any help?

[@LaptopGun]

Had this happen to me too. If your meter reads OL then it's fine. I read it somewhere and turns out it works.

[@nathanc2k9]

I have the OLED switch, and have both the HWFLY 4.1 as well as the instinct V6 mod chips. Which should I install ? I’m inclined to go with the instinct but not sure why it was so cheap in comparison. Thanks

[@sthetixofficial]

any option is fine