Installing Track Lighting DIY (

[@juliebellman2568]

This is the only video that showed us how to put the light fixture in properly. THANK YOU

[@YourNewHouse]

Thank you for watching!

[@chrisewen3813]

I love the succinct delivery and explanation for a number of issues someone might run into. Thanks

[@lisaw6219]

She's amazing! Best video I've seen on this subject.

[@troyparish7052]

Great video! A couple of comments: First, the connectors aren't snap-in only, you should tighten down the setscrew after inserting them into the track. Second, after cutting the track, the conductors have to be trimmed so that the anti-short tabs on the fittings don't push the fittings on the other end of the track out. Thanks for some great information and a well-presented video!

[@me9061]

Loved this. So simple. Straightforward and to the point and informative. Thanks!

[@zone07]

I wish my wife was like her; I would get so much done!

[@cmacclel]

+Zone07 I think it would be the other way around :)

[@zone07]

+Chris Mac touché

[@williamtravis7296]

You said it man!

[@slump6982]

Lol

[@monisamontoya1968]

Excellent instructions. I needed lighting for a craft room and was tired of using desk lamps. This make more sense.

[@OmarFlores348540]

Awesome, very clear, resourceful (reusing the cut parts) and smart (the part of mirroring in the floor what you want up in the ceiling).

[@chandra11116]

Excellent guide. Now I am motivated to finish my project today !!!

[@Nicheven]

Thank you so much for this! It was so amazingly helpful in our decision making process with the track lighting.

[@crosslink1493]

So there still is a good use for track lighting! This is a good solution for anyone removing it from their home's interior. If I was going to buy new lighting for a garage I'd just get some of the linkable LED lights that replace the old fluorescent tube lighting fixtures that used to be popular. Only about $20 per 3 ft section, (I used 6 sections), some connector wires to link them, and you're done for about $140.

[@sms9106]

This was well done and a great idea for my garage.

[@beeisbad]

The BEST info on track lighting for me!

[@arlenedebardelaben4599]

Excellent, precise information given at the right pace with efficiency!

[@leonardpereira7031]

Best video on track lighting - such a pleasant voice, easily explained and not to mention, "easy on the eyes" Good job

[@tainto67]

Bravo! A very workmanlike presentation with all aspects of a typical installation covered and explained brilliantly.

[@peymanlashgari9446]

I really appreciate your professionalism. God bless you and your parents.

[@chapelhill1034]

Your video was clear to the point and easy to understand thanks

[@totheknee]

Such a great, informative video. The other videos on this type of track leave out all the details.

[@scottsenjo2057]

Teresa killed it. Best female dyi I've ever seen.

[@sundry95]

Thanks so much. This helped me attach and install more track lighting.

[@viviandunlop1794]

She wears a cordless drill like no other. Reminds me of Crocodile Dundee, and she can say "No mate, THIS is a drill!"

[@jjasontheriot]

How did she drill those holes into the sheetrock without getting sheetrock dust in her hair or eyes and on her shirt! She's good!

[@ritualafterlife]

Fan-Flippin-Tastic no nonsense, get your butt in there and do it demonstration! I got it on the first play through. Watched 20 more times just cause it's a master lesson in how to make this type of video! I'm putting this stuff up everywhere now!

[@juantamad8339]

Please wear safety glasses, doing it right is one thing but doing it safely is the most important thing. BTW, I'm impressed with your work.

[@lauravanhook1987]

My box didn't come with instructions. Thank you!!

[@claudiamolinaro1010]

WOW She is great! Awesome job! Thank you.

[@GaryYoung-eq1ph]

Can I install these on cathedral ceilings? And how 2

[@bg147]

As the lady stated, the rails have two metal strips on one side and just one on the other. Therefore, make sure the connectors, lights, rails, etc are all lined up by taking this into consideration. I did it the hard way and had to remove a rail and rotate it which is a nuisance when using toggle bolts.

[@jacksanders7728]

If the existing ceiling junction box screws do not match up with new track plate what options do you have to install the plate besides rearranging the old junction box? Somethings are never easy but your video was nice.

[@541brooks]

And similarly what if the junction box screws are facing the wrong direction?

[@glendavis1266]

It would have bern helpful if you noted the brand you were using.

[@IMBIue]

What a smart beautiful woman ! Love this!

[@Bmr4life]

Video is super old but still very helpful

[@OutLoudJB]

This really helped me! Thank you so much👌🏼

[@daveoverbey2032]

Be sure when you connect most lights & appliances to the house the wire is most often aluminum on the appliance & or lights, So you're connecting it to the house wire which is copper.& needs to have a special grease called Nola Flex so they don't prematurely quit working. Otherwise they can expand & contract causing the two different materials to arc & corrode fast & then need be replaced. When you put the two aluminum & copper wire together in a wire nut, just squirt a dab of this Nola flex into the wire nut first & twist them on together..Another trick of the trade is if you're doing lighting or something outside, Before you wire nut the wires into a wire nut is you must first twist the wires together with pliers tightly & then squirt a dab of 100% silicone into the wire nut & tighten on the wires. This will help prevent water of touching the live wires & shorting out during a rainstorm or garden hose sprinkler..

[@peteduncan921]

Where I live, I have never seen aluminum wiring used for circuits like this. It is always copper. Aluminum cable is sometimes used to bring power to the service panel, but I never see it used for branch circuits.

[@badbadley]

@@peteduncan921 Dave was saying you may be connecting the copper house wire to the aluminum wire that came on the lighting fixture.

[@rosiethebear300]

Excellent video! I think I can do it!

[@karzygijose]

What would be the max feet of the track lighting or max wattage?

[@TheFatMan7777]

I have this track lighting system. I watched this totally for the way to connect the floating connector to the track stick. I saw you had done it but it was covered by your hand. Couldn't see how you did it.

[@DV-tc1yr]

liquid nails

[@glamamia451]

Beautiful!

[@francesmunns6032]

What if the wires coming out of the box are red, white and a black wire that wasn’t used for the previous light

[@IcyUuUu]

Can I run leads right off the rails?

[@qAmndAp]

@0:44 this part is not incl. in the track light set I purchased. Duh. I need to get that separate?

[@boxsterman77]

Does it matter which direction you turn the light to "snap" it in? You went counter-clockwise. Is that true in all cases? Can you go either way? Is it all tied to the specific producer? Mine came with very little instructions and doesn't cover this.

[@saddad6601]

great video, one thing i noticed is that she doesnt explain how to connect the cut pieces. i looked at a few other videos and you have to bend the copper wire to connect with a special Track Conductor Bending Tool... the problem is i CANNOT find on for sale anywhere online in the US... that seems like the perfect Amazon item, but they dont seem to have a single one....or do these connect another way?

[@stelas9307]

Great video!

[@MrRusheed]

How many head light can be installed?

[@jeffbecker4882]

I think I lost track of why I looked up this video in the first place. Wow.

[@creativefilmz]

Nice video but why aren't you wearing safety glasses?!

[@SuchaCaligrrl]

I do have a question... sorry if I come off too green but does it matter what lights you used for the track? can one buy a track and choose different lights or do the tracks come with their own lights and one must choose from that selection? Just curious... The reason I ask is because I like to change things up quit a -lot and if it is as easy as changing the lights oppose to having to change the entire system... well then that is right up my alley.

[@HERMITBOY]

@suchaCaligrrl.. You can use a number of different light fixtures with track systems, they're very universal.

[@SuchaCaligrrl]

+UNDERNEATHHOUSE36 thank you for responding, I appreciate it.

[@annabailey2206]

They don’t sell this in white anymore?

[@robertscottjohnson5744]

Great video and product...

[@rickazar9397]

thank you...on my way !

[@samgo44]

Great tutorial!

[@marcelinoramos4580]

Thank you

[@WeekendWarrior604]

Very informative! She doesn't look like a Michael though 😂

[@tororoycorpuz5181]

I would be wearing a pair of safety glasses specially when the work is overhead.

[@GuenevereSchwien]

Great video just want I was looking for thanks!

[@michaelfortnerjr1582]

Sweet drill.

[@marcomendoza7502]

Still very beautiful!!! ❤❤

[@ahoh524]

Where did you purchase the materials? I need to complete this exact thing in my garage too!

[@jaudielmartin7359]

My track light Is pleasantly 110 v at this time but I want to know if I was to change it to 220 volts if it just a matter of changing the voltage and the bulbs or would I have to get a 220 volts track light ??

[@MustPassTruck]

It depends on the product. Check the technical specification in documentation that came with your system or contact the manufacturer directly. Increasing output to any electrical item can be very dangerous if it isn't designed to handle it. Imagine all the bad things that could happen if part of the track started melting.

[@brian8076]

but a 4" piece of track and 3 lights is $124 at Lowes...

[@BenevolentXMachine]

Where can I get that track lighting product?

[@johnweng3623]

BenevolentXMachine Contact us for track lighting: www.garnde.com

[@dark_sider]

We learned that yesterday

[@peterjoy931]

What brand of track lighting is this?

[@liteharborlighting8050]

Great, Love this!

[@KSLTech4]

Quick Note: 1:25 the tracks ONLY come in 4' and 8' sections.

[@jaudielmartin7359]

What do you mean by 1:25

[@fresheddie..]

Easy tracking thank ...

[@kaylabrewer8748]

Mine still isn't working...

[@bludika]

shes badass

[@TheTerminator1919]

They didn't show her actually doing the cutting

[@stevendimakos9211]

Your awesome

[@oq2593]

واضح جدا مع عدم وجود ترجمه ..شكرا لك

[@13LoveFeet]

What if you don't have a green wire all I have is two extra red and two extra white

[@kimgough4839]

Very helpful but wear safety glasses.

[@joshuajoyce6272]

Im in love

[@rufinoole5889]

❤❤

[@donerae8682]

I didnt hear a word she said. She is beautiful.

[@misterwebb1472]

Who puts track lighting in a garage

[@YourNewHouse]

People that want to have kick ass garages

[@juliocuellar7014]

No doubt you were born for this. You are soy damn smart, beautiful and sexy... Love your voice and video. I usually use my grinder to cut because it's much faster and easier for me, but it was a pleasure watching your video. Good luck!

[@JacintoLeiteAquinoRego468]

cutie...

[@dalemacavinta7484]

she's a little too cute to be installing track lighting.

[@rogerthatrocks]

at 4:30 cut to a man finishing the cut

[@fearfeasog]

nice, DB.

[@Bacardibombillo]

Lol... she said less than $200. For all that track and fixtures. Lol