Installing Trimmer Line - Husqvarna Trimmer

Trimmer Line: www.jackssmalle...
This video shows you how to install new trimmer line on a Husqvarna 223L String Trimmer.
Trimmer line can wear down, become frayed, and even break as you constantly use it to trim weeds and edges around your home. Always keep your trimmer spool wound with enough trimmer line, so you won't run out in the middle of a job.
*Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug. Remember to wear appropriate safety gear to protect against harmful chemicals and debris.
Check out more Trimmer DIY Articles & Videos: www.jackssmalle...
Connect with us:
Facebook: / jackssmallengines
Twitter: / jacks_jse
Like our videos? Leave a comment and don't forget to subscribe to our channel.

[@ollieone051]

Who else has to rewatch this every spring?

[@Jean_lukepicard]

2 years in a row lol

[@Gabo832]

Ain’t right!

[@mercedesbenzs600bash]

LOL,I think I'm good now, we'll see...

[@adamcampbell664]

Me😂

[@christinehester2024]

Me 100 percent

[@kevinmac1989]

Great to the point video. Loved how the young man didn't give a 15-minute history of the weedeater,

[@awolsurf-TC]

Newz we can uze...w/o the stuff we don't need!

[@mignas]

Absolutely on point comment.

[@mrjon75]

In 1863 Bartholomew Gaines invented the first hand powered, worm gear drivin line trimmer. It saw little sales, until a peanut farmer named Otis Carbuncle improved upon the design with patent 3,672....

[@kevinmac1989]

@@mrjon75 😂

[@erictaylor687]

Next to my wedding day and becoming a father, watching and seeing how to do this ranks way higher than it should. I've had my husq weedeater for 10 years and.... I'm not crying, you're crying.

[@davidmiller180]

ditto! so simple! Guess I should have read the manual.

[@janicewoods3072]

Thank you so much, I spent an hour trying to figure out how to string my new trimmer. The instructions were of no help to me. I found your video and had the trimmer strung on the first try. Perfect instructions!

[@braedenbrown6691]

IKR? I recently bought one. The Owners Manual Is A Complete & Unfunny Joke. Besides That? You Need A James Webb Telescope To See The TINY PICTURES & WORDS🤦🏾‍♂️🤦🏾‍♂️🤦🏾‍♂️

[@CHECKERD444]

Thanks Jack.... the loop now makes more sense, DUH !!

[@bethsbabies]

Wow, a huge THANK YOU for this video! I’ve watched others in the past that made this process soo much more complicated and confusing. Gosh, who knew it could be this simple. Got it on the first try - yay!

[@Rockstar09476]

I just spent a hour tryin to put it in til that light 💡 popped in my head and said go to KZbin after watching this it only took 2 minutes lol I’m thankful for this video appreciate it

[@batbrains187]

🔥 thank you sir for reassuring me the way to do this. This is my first time ever putting string on these kinds of weed eaters. Thanka again.🔥

[@r3djar]

You'd think I'd remember this but here I am in early spring once again watching this.

[@DenoA.]

Very helpful, thanks. I have to rewatch this every time I use it

[@caesaraugustus8281]

This the only string trimmer I've ever owned that I needed to look up instructions on how to re-string it. Good video

[@harryballz6358]

Don't worry, it will outlast you so you don't need to learn another one lol

[@shanemorris3554]

Glad I watched a second video: first 1 was saying to use 2 pieces, but I think mine needs 1 like this.

[@mrboharvey]

Dude- gotta tell you I watched this almost one year ago to the date. Thanks for making this video for all us mechanically-challenged people. See you next spring!

[@krystalmullane]

Thank you so much for this video! My husband passed away 2 months ago and I am having to learn how to do this stuff by myself. I couldnt find the owners manual to try and figure it out!

[@moriscoley5328]

So sorry for your loss, and I believe that you can do anything that you put your mind to. :)

[@shanemorris3554]

I hope you're coping ok.

[@retired55.]

Hope everything is ok

[@phriendlypherals4552]

You have saved the day for me! Took it to hardware store and guy there wasn't informed on dual string. Now I found you and your very clear simply explanation is appreciated!

[@stevecreswell9962]

SUPERIOR to other Husqvarna spool install videos. #1 Clear carmera angles, and #2, optimal verbal description; well done!

[@josephmroczka1570]

Jack, Thanks! Instead of dreading to try to figure out how to restring my weed eater in the past, I would go and buy a new head already strung. Thanks for making this so simple.

[@hamburger6329]

Joseph

[@Benjamin.Chapman]

I'm 14 and my family just bought a new weedeater, I'm officially the first one to know how to change the string lol! Thank you so much!!!

[@flaps_rickenbacker247]

My go to video twice a year. Thanks for posting.

[@buddythelittletinyrescuedo5114]

THIS IS THE BEST NO NONSENSE VIDEO ON INSTRUCTION! Just got a new HUSQVARNA L!29 and it ran out of line in 2 uses. I oRdered an Echo 450 Speed Head but can't hurt to know how to do this. THANKS!!!

[@violetsarenotblue2877]

None of the other quick videos I found showed me a weedeater that didn't have holes. Thank you for sharing this! It helped me restring my Redmax TR2300S where all the other videos failed!

[@JLvatron]

Yup, same for me they were all the holes kind.

[@pjohns3]

Thank you Jack. This is WAY easier than how I was doing it before. Now I don't have to dread restringing my trimmer!!

[@wavehead11]

I’ve lived off the grid for 25 years and used Stihl and Husqvarna weedeaters with string. I’ve been doing it wrong for 25 years.😂 Thanks for the video.

[@SidekickSam24]

Welcome to the internet :)

[@jspope2008]

25 years off Grid. I’d be dead in 24 hours ! I’m pathetic at anything one would need to life like you. Take my had off to you if I had one 👍🏻

[@younggun6016]

Same.. Been weed eating for 20 years and apparently i've been doing it wrong the whole time

[@col.callan7961]

Thx pal , I have been trying to figure this out for 2 seasons now.

[@brucemou1]

Beautiful short video. Thanks so much.

[@Fatoldaussiebloke]

Perfect. Easy to follow without 5 minutes of crap as other videos have

[@jamesbelvis4464]

Excellent, simple, and informative! Great job!

[@xavierwarner65]

Thanks I just got a trimmer this will help me out big time

[@wenonascott9013]

Thank you, Jack! Simple & straight to the point. Single momma here, trying to do it ALL.

[@bradgibbons6580]

Great video, not wasting time and easy to follow. Thank you!

[@outoaguitar3320]

Thank you Jack I borrowed a friend's weed eater it is almost brand new it is the Husqvarna 525l I did not know how to change the string thanks for the info

[@1Sundy1]

So easy. Glad I watched this video before simply trying to figure it out (like I normally do)

[@stewram]

Thank You!!! My instructions got thrown out and I had no clue how to do this. Now I do. So much easier than my last trimmer.

[@TripTheLineFantasic]

Good video buddy straight-to-the-point

[@chisexton5845]

Thank you. This will work for an older Ego trimmer also that I bought 2 years after this video. Exactly what I needed.

[@mathewbauer8166]

Coming back from last summer

[@jeffvaliton4530]

Thanks. Bought used one. No manual. Spool holes looked odd when went to line it. Never would have guessed to loop it. All other double lines had before were 2 separate lines. Good simple video.

[@sandyy-s4834]

Thank you for having the easiest directions I’ve seen so far.

[@tyl3rj2]

This was extremely helpful to me on short notice on a side job having to change the string on my husqavarna weedeater , i am used to an echo , so this was a big help thank you

[@vafishing8296]

Never in a million years would I have thought to do that. You’re awesome

[@rodneyingbretson4229]

Nicely done!

[@johnnywalker5635]

Have had the husq 324L since 2011 and just now learned how to do it properly. Wow. Thanks for your video. So simple now that I see the technique.

[@vannmann9597]

Me too. This is crazy easy. I was wrapping it around both sides with only one continual wind. It would never retract on it's own by this method. And the other videos I watched showed a different design on the wind cylinder. They had 2 holes in them to insert both sides of line. So, I just looked up Husqvarna specifically and now inderstand the correct way to wind the line. I am so happy. THANK YOU!!

[@ckl5590]

Thank you so much for this video. My awesome husband bought one of these units for me for Mother’s Day ! I love it but already misplaced the manual.

[@alannowell778]

Haha! Right! Just had to re-watch! Happy Spring!! 🤣

[@OldStickyRice]

Thanks for the short vid. Straight to the point.

[@user-xf1zx5ou2n]

OMG ! Now that I watched your video it so easy . Thanks

[@kingsgame1916]

Thank you so much for your help with your video. I have family members, for some reason don't like to get help from KZbin. And they're not old, I don't understand some times. I showed them your video, they said they liked it. Thank you again for your help!

[@thelokifiles]

Well hell yeah, thanks Jack.

[@WayneDerk-sn9do]

The best. Awesome don't have to watch it ten times.

[@nathanielstephenbaue]

Finally, a video without the bs. Thank you.

[@marykimberlyhayes]

thank you, I knew it was simple , just needed someone to show me!

[@prestin6798]

Excellent concise video. Thanks

[@toddmiller2239]

Great job. Heck, I'd still be out there trying to figure it out. Thanks

[@ZachAuclair]

How long of a string did you use?

[@FRYERTUX]

Looking at other posts and don't see the length either.

[@tim8468]

Thanks man. You saved me some headache and more than a few curse words.

[@matthewferguson5421]

Brilliant - me too. Been doing it wrong. Thank you JacksSmallEnginesTV

[@joeyredmon]

Excellent video! Thanks!

[@davidvega5047]

Quick, easy and to the point. Thank you sir!

[@MJisKING447]

Omg. Thank u. For this explanation video. Will be watching it every time from now on lol

[@bedfordfarmersmarket8850]

Thank you very much. Solved the problem DH was having using just the diagrams in the user manual.

[@chrisvaughan7790]

I KNEW there was an easy way!! Thank you!

[@Backwoods101]

Thank you very much...easy to follow and understand..the best video! Thank you again!

[@endonurse541]

Thank you so much. The spool came ready to use but when I had to open it to find more line it wasn’t strung right. Maybe tomorrow will be easier going.

[@MegaFranceschini]

Thanks for that video. I was racking my brains on how I was going to string that thing. (Trimmer). That was easy. I appreciate that thanks again. Have a nice day. Stay safe. 👍👍👍👍

[@rogerluman]

you just made my yard work 50 percent easier. thank you

[@lifeontheriver]

Thank you! You made that very easy for me.

[@andrewe2853]

Very easy instructional video thank you I'll never forget how to do it from this point on have a good one.

[@user-vi2wf4xl8i]

Many thanks for this video!

[@johnlemon543]

Great guide, thanks!

[@kathyanthony6632]

Thank You! Very good concise instructions!

[@watchful1168]

thanks...VERY helpful the way you did this video. And safety reminder VERy good!

[@andreaburton7515]

Thank you, great video 👍🏻

[@caryhuff8924]

The sad part is that I can't remember how to restring the bloody thing, and I have to re-watch the video..... G'day from Australia mate. No shrimp on the barbie until I get the lawn edged.

[@BrianxMoy]

Fair play to you. Good simple and quick instructions

[@theoneandonlyravioli2985]

Thanks for the vid. Super helpful. I had been stringing my spool totally backwards. It seemed to work for the most part but I could tell it wasnt right

[@matteonewton]

Thank you, this is the first video I found that I could understand! I appreciate it!

[@zanderman2539]

I wish he would gave how much line is necessary. I will try 15ft divided by two equals 7.5 on each side we’ll see if that works.

[@foxycleopatra6675]

Awesome video, thanks for making it!

[@evanlebaron9465]

Thank you so much, only video that got straight to the point👍🏻

[@KB-2222]

Thanks so much for this! Short and to the point! Take my like! 👍

[@pdiprata]

Sweet! Thank you

[@youcanfindrace]

109 dislikes by very simple people. Great video I appreciate it.

[@Response166]

Good video, shows everything. I have a T45X head on my Husqvarna and it works very nice.

[@BigMarcusc1995]

Thanks for the tips! Greetings from my job in Norway.

[@hustlindaddiy5194]

Great video. I posted a similar one on my site as I always need a reminder every summer on the proper way to change the line. Ha.

[@jonathonsaavedra843]

I havent used one of these since i was a teenager and thought that me still in my mid 20s would remember, it appears not lol, killer video helped alot

[@Jarred_Anae]

Thanks man! I was stuck but when I watched you vid I don't it like real fast. you made it simple cheers.

[@joeneary6258]

Well Done!! Quick and to the point!

[@madarchermoto4955]

Stringed it backwards ... great job

[@eternitywithjesus777]

Very good instructions

[@cupofjoe2988]

Thanks for posting. This really helped a lot.

[@kynukeman6582]

Thank you for the vid.

[@lanceautonomous]

Awesome, this was very helpful!

[@MrsBeccaMc]

Awesome! Thank you so much! Had no idea how to do it, but now, thanks to your video I do :D

[@lavaundaselby]

Excellent! Thank you!

[@catherinepeterson1730]

Amazingly simple - awesome video!

[@larrylee4744]

Very good video! So easy to follow, even I can do this!!

[@Hwy20W]

Good Instructions - right to the point!

[@kountrysilver8229]

Thanks my guy..😂I have to watch this Everytime

[@melaniegardendesigner5992]

Thanks dude. Short and sweet. Just switched to Husqevarna and I was pulling my hair out lol