Love the videos I don’t even have a 12v at the moment but will eventually come back to watch the video again when I do.
@Hazardous-Hotrod-Knowledge2 жыл бұрын
Glad to be a bad influence in your potential next purchase 🤣 start looking, they aren’t getting any cheaper!
@darius9521 Жыл бұрын
Thanks for the video! Makes me wanna go install my dv's and gsk that I've had sitting in the basement for over a year. A video on pump timing would be awesome
@Hazardous-Hotrod-Knowledge Жыл бұрын
I'll get on a pump timing video, I have a hillbilly way of doing it where you dont need any special tools and it can be done in minutes!
@JoeyDavidson-qb6ke Жыл бұрын
Great video, im doing injectors on my 1997 12v &i have alot of great input. Ty
@misterj5045 Жыл бұрын
I've used a torx socket on my tamper proof screw. I think it was a 25 or 27. Set it centered with an extension and a few taps with a ball peen hammer to give it bite.
@Hazardous-Hotrod-Knowledge Жыл бұрын
I’ll have to give that a try! Sometimes there’s a little dot in the centre of the tamper proof screw, I imagine that’s what you’re hammering into
@misterj5045 Жыл бұрын
@Hazardous-Hotrod-Knowledge Yes, it has a small indent on the top so when I tap the torx in, it is able to make its own shape, plus I think the shock helps loosen the bite before trying to turn it. I believe it is a 25 or 27 on the top and 20 on the smaller afc housing back plate. I reuse the same fastener once doing this.
@josephthomas47832 жыл бұрын
Awesome video! Try to warranty your bluepoint socket. Mine has always fit nicely on every truck I’ve used it on.
@Hazardous-Hotrod-Knowledge2 жыл бұрын
Good idea! Maybe I got a faulty one, I’ll see if I can get in contact with a snap on dealer
@michaeldixon9089 ай бұрын
Nicely explained. Thanks
@Hazardous-Hotrod-Knowledge9 ай бұрын
Glad it was helpful! Thanks for the comment :)
@PnwTinkerer Жыл бұрын
Great video !! Thank you
@haydenwilliams17502 жыл бұрын
Great video mate!
@EspososRivera-Chavez Жыл бұрын
SOS otro rollo amigo muy buen bideo😮
@Hazardous-Hotrod-Knowledge Жыл бұрын
Thanks!
@Jeff-vc2tt2 жыл бұрын
Power driven diesel makes a socket for the delivery valves
@Hazardous-Hotrod-Knowledge2 жыл бұрын
One guy suggested to get it warrantied, so I’ll try that and if it’s still junk I’ll pick up one of theirs!
@Jeff-vc2tt2 жыл бұрын
@@Hazardous-Hotrod-Knowledge yeah they're awesome specially made for delivery valves
@n0n0n02 ай бұрын
No timing adjustment to get to the 350hp?
@Hazardous-Hotrod-KnowledgeАй бұрын
Should be fine on stock timing but it would help for sure to bump up to about 18*
@Nicksvintageiron Жыл бұрын
What are your favorite brand of governor springs youve used? Ive had a bad experience with one brand and would like to swap mine out
@Hazardous-Hotrod-Knowledge Жыл бұрын
Ive used “handytek” Amazon 4k gov springs in more applications than I can count and have never had a single issue. What trouble have you been having?
@Nicksvintageiron Жыл бұрын
I used a set of DAP springs in one truck and they were super touchy. Almoat felt like 5k springs. I've adjusted them multiple times and still can't get them how I want them. The other 2 trucks I've done I've used cheap ones with decent luck.
@rockycourtney3110 Жыл бұрын
Can you take the copper washer out from under a 175 horse pump delivery valve to make it like a 215 horse?
@Hazardous-Hotrod-Knowledge Жыл бұрын
It’s more than that for the differences between the pumps. The 180 and 215 Hp injection pumps have a completely different pump cam that delivers fuel at a faster rate, as well as having a better plunger design. The copper washer is just a different sort of thing they did with the barrels in the 160/175 pumps to seal the delivery valves and was done away with the later pumps
@rockycourtney3110 Жыл бұрын
@Hazardous-Hotrod-Knowledge Thanks for the reply I did some research and found out the same , I am bummed because my engine was built as a high output with a 215 pump, but a shop replaced the pump with 175 horse yrs ago .
@shevilihabibi8895 Жыл бұрын
please tell me, how much horsepower did you get after these improvements?
@Hazardous-Hotrod-Knowledge Жыл бұрын
I set up the AFC housing pretty mild but typically a truck with these mods on the stock turbo will go to about 350hp
@DiegoSepulveda-dz3vs Жыл бұрын
Alguien puede traducir
@Hazardous-Hotrod-Knowledge Жыл бұрын
No estoy seguro de cómo traducir al español y puede ser mucho trabajo con todos los subtextos que tengo en el video también. Gracias por ver y estar interesado en el video, espero que de alguna manera puedas disfrutarlo :) Utilicé un traductor en línea para esto, solo puedo hablar inglés.