Intel Core 2 Quad Q9550 overclock 2,83@3,7GHz on GIGABYTE EP35-DS3

[@AllTrueIsHim]

Q9500 @ 2.8 -> 3.4 stable Gigabyte 965p-ds4 3.40GHz (400x8.5) [All settings on auto]

[@yusufberber2017]

yes , you say true me test

[@oxHannibal]

im runing 3,7 GHz on FSB 424 and Cpu Voltage 1.2500..V. How can i reach more ghz , more overclock , what i need to do.. thanks :)) i have intel 2 quad q9550 , ddr 2 gbx4 and Gpu is not needed i think :))

[@aliemadi4993]

i have played reddead 2 with q9550 without oc! on highgraphic with gtx 1650 super

[@jomanout5866]

What's your FPS?

[@mdw159]

Hi,,,, Is there any stress test video...???

[@defaultuser0856]

what r temps ?

[@Khinh-xq6lx]

nice oc

[@dbddimov]

I tru to overclocked to 3.29 ghz and set voltage to auto and CPU temperature rise from 45 / 50 to 65 / 74 degree.

[@kitcat9685]

set it to manual

[@felixsheppard519]

with gigabyte combo g41???? and q9550??

[@hazem8278]

pado mar can you tell me if you did it

[@brianbintang2086]

hi id like to ask you my q9550 just reach 343 cpu host , can you help me ?

[@brianbintang2086]

fabinho7756 yeah cause my g41u think

[@snchez2106]

hi, I want to push my Q8400 to more GHz, but I cant it seems. Mobo is Asrock G41M-VS3 2.0, currently is at 2.82 GHz stable from 2.66, but I cant push it further. Any help?

[@snchez2106]

thanks for the advice but I ended up getting an i5 at 3.40 GHz, destroys all games.

[@Outlawproductions582]

i cant get mine overclocked :c

[@MCBreadstickSoundcloudRapper]

What is your psu?

[@ramsrikanth7639]

Guys see the fsb it reqches 1.7Ghz😵😵 Awesome😁😁

[@ΚώσταςΑλάμπεης]

Q6600 3.6ghz rock solid 1.36volt 🙂🙂🙂🙂

[@baby___hteb7424]

can it go 4 ghz?

[@semin8497]

can i do this on an biostar g41-m7!?

[@hazem8278]

SEMiN can you tell me when you did it

[@feltuzok]

Hey! Can you help me? I have a Intel core 2 quad Q8300 2.5Ghz processor. I would like to get it up to 3ghz. How I set up the data/specifications? Can you write a list of it? For example what do i need to enable or disable? How much voltages do i need to set for: -DDr2 OverVoltage Control -FSB OverVoltage Control -(G)MCH OverVoltage Control -CPU Voltage Control?

[@BajoMendez]

ddr2? msi 7592 is ddr3 ...

[@vk45dett]

Hi! I have the q9550 + gtx 560 just like yours. I want to over clock it a bit to run cs go better. Im planning on buying the Scythe Shuriken REV.B cooler for it. Could u please help me out in how to OC. Thanks!

[@Filmer1eX]

vk45dett I personally have been running my Q9550 rock solid on stock voltages at 3.4ghz for 5+ years. The only thing I did was manually set the clock ratio to 8.5x, disable C1E and Intel SpeedStep and change FSB from 333 to 400. I also changed FSB Strap to North Bridge from 333 to 400 (which is the max so that it matches with the FSB and gives a nice 1:1 ratio) but that's not necessary. I left all voltages etc on auto.

[@vk45dett]

Filmer1eX did u upgrade ur cooling system

[@Filmer1eX]

vk45dett Yeah I have a good noctua heatsink and fan

[@vk45dett]

Filmer1eX what mobo u running? I just bought the xig 1283 cooler hsf, about overclock but dont kno what speed to start with. I have the ud3p with 8g ddr2 ram

[@Filmer1eX]

vk45dett Asus P5Q

[@baby___hteb7424]

i have a q6600 oc to 3.30ghz runs gta 5 fine oh and gtx 660 2gb

[@Jazzybreaks]

i have a water cooled Q9550, any advice on overclocking?

[@FunnyMomentsTV2000]

if you can afford water cooling but have a bad cpu from 2009 get i3

[@vajferttv4904]

Is processor overclocking dangeours

[@v1n1c16]

No

[@kotktorychodzipogowieadama2645]

ok

[@JaceFunkyFace]

4.2GHz**

[@JaceFunkyFace]

HAHA i am on 4.3GHz

[@MartinKincl1993]

That's what I've always wanted to achieve. Wanna share some details about it? Mine is at 3,8 GHz at 1,2656V and I seem to be stuck with it.

[@JaceFunkyFace]

Martin Kincl I have an ASUS P5Q3 Deluxe and a Core 2 Quad Q9550 overclocked to 4,2GHz believe it or not i am running stock voltage and i have the CPU multiplier on 8.5 then bump the CPU to 470 and you're ready to go, make sure that your memory is not overclocked to high because your CPU is automatically keeping the memory frequency balanced with the CPU. Stock value is 2.83GHz

[@MartinKincl1993]

VideoAndMore Your chip is quite remarkable! I have Kingston HyperX RAM modules, which are able to run at 1066 MHz, so they are likely not the issue. Maybe it's the limitation of my motherboard (Gigabyte EP45-UD3; should be pretty decent for OCing C2Q) or the CPU itself. Today I tried raising the FSB by small increments, always going up by 10 MHz. Once it became unstable, I bumped up the voltages a notch in the following order: Vcore --> VTT --> Northbridge. This way I reached stable 3,9 GHz. When going for 4 GHz, I raised the voltages several times without success. The system was unstable and the temperatures were also getting high, due to the increased voltage. I didn't touch the PLL voltage (1,5V), which I have little understanding of.

[@JaceFunkyFace]

Martin Kincl You could pump up the PLL voltage by just a little and see if that works out. Ypou can also set it on auto so it automatically sets the voltages for the CPU.

[@TheElderize]

im stuck on 2.83ghz because im not sure if i can overclock it :C