Intellitronix.digital dash

Intellitronix.digital dash installation in a 1979 Corvette.
Recorded over several days as you can tell from the 6 clothes changes.

[@samuelbrown3217]

Every video I watch of the installation. It do not show how to wire up the system. It only shows a few wires that sucks

[@Intellitronix]

Geat Video!! May we share this video on our social media?

[@billsonecargarage936]

Sure thing. I know it is not thorough instructions but it should help someone.

[@marki336]

For the Speedo panel, did you have trouble putting the top shield plate back n. I can’t get the bottom clips in with the dark plate and the original plate. It ends up being to thick if that makes sense.

[@billsonecargarage936]

The blue tin piece that holds the gauges does not need to go back in. Back plate, circuit board, tint plastic and then original clear lens

[@myceliumforall619]

​@@billsonecargarage936I believe you are referring to the oil, clock etc gauges. But I'm having the same fitment issue with the speedometer panel. The plastic makes it impossible to fit. Please help

[@judeverge]

We are gunna need to see a short drive now that it is warming up.

[@BillEisnor]

Sure thing. Just waiting for a day without rain.

[@billsonecargarage936]

kzbin.info/www/bejne/hqbWgKqketmKgdk&ab_channel=Bill%27sOneCarGarage New Video is up. Thanks

[@myceliumforall619]

Im restoring a 79 Corvette and im doing the upgrade as well. The issue im having it that the plastic cover makes it impossible to fit. for the speedometer and the RPM meter. Could you advise please. Btw thank you!, this is helping me go through the install process perfectly (besides the fitment issue im having)

[@kaelenstarrs7362]

Cna you show how you attached the dimming wire please? This video has been very informative.

[@billsonecargarage936]

The dimming wire was connected to the parking light lead from headlight switch with a wire tap connector as per instructions.