Intense Compatibility: Klein is Killing It Twice with Mini MODBoxes magic, passthrough ratchets...

[@megafatshady]

Thank you for this video! This is the single best Klein video helping me to make a decision on what I should get, I was a little overwhelmed into which ratcheting set up I wanted to get. I have a lot of regular screwdrivers and this whole pack out ratcheting set up is EXACTLY what I want especially when I have to entirely dismantle pieces for recycling or repurposing parts.

[@harveysmith100]

The boxes remind me of Systainers. Having the ability to access the box in the middle of a stack is so useful.

Side story timeline: 8:20 9/16 escape the group. 10:18 He is now under cover. 11:11 He's back ! Joke aside, great video ! This set up make sens !

[@TheRealBrockRoberts]

More proof Snap-on does not walk on water...

[@Heizenberg32]

I asked a marine mechanic: They confirmed!

[@scotts4125]

@@Heizenberg32I asked a Jewish carpenter. :)

[@ElectroAtletico]

...the auto techs will vociferously disagree with you (and I)!!

[@alandesgrange9703]

@@ElectroAtleticoThe self awareness that they have been overpaying for everything for many years, is too much to face.

[@cwcadventures9987]

With so many high quality USA made tool brands it’s hard to justify snap on but proto has a lot made over seas now as well as SK. We need to support Wright as much as possible so they don’t betray us lol

[@robertdeforest9682]

Very impressed by Klein with these ModBoxes, I already have a bunch of tools but I’m jonesing to get my hands on this…

[@paulmarsdensr1095]

I just left Lowes and Home Depot and I bought my $21.00 11&1 Klein Screw driver and I'm happy. I love the Klein mod boxes, I also looked @The Rigid tool box system and the Klein tool box systems. Klein has really did it. A great video brother.

[@SchulzChris]

Doc, I'm just blown away with all the tools you have! You've got to show us your tool storage areas!😊

[@Raeilgunne]

Klein may be going to a proprietary setup, but their modbox and inter-kit compatibility may drive me that direction for future drivers. They already have most of my electrical tool real estate in my toolbox, but besides that I only have 2 screwdrivers and a few utility knives.

[@Quickwrench75]

Really cool backdrage setup up you created. May not be the super scientific way of doing it But genius it still shows levels of bsck drag . As always Doc great video.

[@ИгорьАлексеев-э6в]

We need just one innovation from Klein. Klein, please invent metric bits and sockets!

[@firstmkb]

Does Klein seriously not sell metric sockets? That was my one way to justify buying tools I already have another version of. Don’t get me wrong - I am still lusting over that stack!

[@ragingroosevelt]

Yeah, no joke! I don't have much use for imperial for the projects I'm working. Seems silly to skip metric.

[@patricklinyard1119]

Likewise I want the whole system but need it in metric; oh well the search continues…

[@ricardosantana5424]

I am an engineer for a European company so I need metric as well since all the machines are built in Europe. Metric please! Wera and Wiha for now!

[@justincolton4074]

For the first time in my life a saw a Klien metric Allen key set at my local supply house

[@michaellindsay8934]

That is a great system Doc looking forward to seeing all of those sets

[@ToolsandTime]

That's a cool ratchet driver, I wasn't too crazy about some of their earlier ones, same thing--just kind of big and clunky--but this one looks different. Thanks for showing it to us Doc!

[@MojoPup]

I decided to go Toughbilt for my stacking toolboxes but I also have a lot of Klein tools. I love these boxes for keeping my tools organized.

[@markkempton4579]

I love these mini sets. I just wish Klein would move into the metric space. I understand why they don't, but it would be more helpful for me in the stuff I work on around the house and shed if these small socket kits were metric. I've been wanting a ratcheting screwdriver, and this new 11-in-1 has been at the top of my list. I'll probably still go with them, but it would be nice if there was a small metric socket kit for a be-all, end-all. I'm waiting to see what the new Icon mini kit looks like. I'll likely go with that unless it's more than a Wera Tool Check Plus.

[@firstmkb]

Why do they not offer metric? It’s not like metric sockets will cannibalise their SAE sales.

[@markkempton4579]

@@firstmkb They have started just recently, but I think traditionally they've been focused on the electrical market and also had a lot of traction in the HVAC market with things like the flip sockets, and the majority of that from what I can tell is all SAE still, at least here in the US. Just a guess as a homeowner who has been following the tool industry for a couple years.

[@mikecurry6847]

I honestly wonder if other through hole tools will connect to these, I think they might. I have a decent spline socket set from craftsman thats all through hole like this, it connects right up to the other through hole stuff I've seen

[@davewood406]

I've been using that 1/4 inch passthrough set for a while now. I reach for it all the time.

[@philchristmas4071]

After watching this video I had to start a set for myself. Nice little setup to have.

[@HeyDerFolks]

Picked up that pass thru socket set on sale a few months ago, big fan. I’ve got it stored in my truck EDC for now until I find a better use for it

[@1290adamjones]

Where did you get it, I can't find it anywhere.

[@beachthor1]

That big Klein handle looks like a light saber handle 😂

[@skippy801]

Great video! Thank you for the reviews!

[@aguycalledlucas]

Doc, your tool review/discussions are top notch!!

[@MRR-qv3bw]

Snap on is definitely going to knock off this entire setup! KLEIN KNOCKED IT OUT THE PARK WITH THESE SETS!

[@mkennedy319]

After i lubed mine and worn it in a bit, the back drag was lowered by about half to my untrained hand. Similar to my LTT screwdriver.

[@dlloyd6300]

Where did you get the Klein pass through ratchet kit?! I can't find it anywhere!

[@1290adamjones]

Same

[@michaelmartin2276]

Been a mechanic for 45 years and have never been a fan of Snap-On products. Just recently bought a few new Klein tools and like them.

[@csimet]

Klein makes some nice screwdrivers and I have many. I just picked up the new 11-piece screwdriver (32500-HDRT) and 1/4" socket set (65300) for a general everyday use set. I'm passing on the 3/8" socket set because... I think they really missed the mark and opportunity to make the 1/4" and 3/8" sets compatible with other manufacture's pass thru sets (GearWrench, Crescent, etc.). It would have been great that they could accept those others to expand use and ability to add metric sizes. They are very similar but are sized slightly different. Klein needs to make a holders for the MODBox that permits you to snap on and carry the 11-piece screwdriver, so the set stays together. Many people, myself included, buy them to use together.

[@Graver81-69]

I’ve started building up a whole Klein tool collection not just because the tools are great but the mod box design is excellent.

[@BobCollins42]

"Intense" compatibility? Here's an example for you. I strongly support metricfication. I chose metric fasteners as often as I can. But don't change my 1/4", 3/8", 1/2", etc. square drive socket wrenches. Likewise, 4mm is the standard precision bit size. There is no excuse for Klein to make 3.5mm bits other than to screw up the market. Just say know.

[@drscopeify]

I have around 30 different sets of precision bits and it's a proper smorgasbord, even if they are all 4mm some fit some don't. I assume that it is just the nature of tolerances and variations in manufacturing. I personally keep sets together and rarely even try and cross between them.

[@mitchstallings7196]

I checked Home Depot and Lowe's, neither have these sets listed. Amazon only has one type. Links?

[@1290adamjones]

Same

[@williamallen2777]

But they don't have an adapter to go between the large and small ratchet. Why???

[@ToolinAround2025]

I’m guessing it would increase returns/broken stuff.

[@FixitFred]

In Canada Home Depot is only offering an old selection of klein tools no mod box stuff no new tool offerings. We used to have lowes in Canada but all the stores turned into Rona+ and have only old lowes tool offerings so they new got any klein tools only ideal tools. Unfortunately the only way to get the good klein stuff in Canada is to drive to the states and go to Lowes or to order from electrical suppliers or online tool suppliers. I really would like to see klein have great offerings at stores in Canada that you can go see all the tools

[@Evil_Joe]

we get the shit end on most things here

[@norbertaraujojr9885]

Pass thru is funny. Works in few occasions. Get them nuts there by hand then wrench finishes it up.

[@FowlerAskew]

I'm pretty excited for that passthrough socket set. I've always thought they were interesting, but this is the first one I've seen that doesn't look incredibly bulky

[@slappomatthew]

sold me. ordered the screwdriver and the ratchet set is in cart. lol.

[@stefanczechorskidds8435]

Its a tool Erector set! Remember those!

[@robertl.grayjr.nremt-p994]

Can you post links as to where to get these mini modbox kits?

[@mrbigberd]

I wound up returning my Klein 4mm precision set shortly after purchase because one of the torx bits twisted the tip off one the very first screw head (only Klein product I've ever returned). I was shocked because I wasn't applying very much force at all. It obviously wasn't heat treated properly, but I'm not paying a bunch of money for bad bits. I guess it's Wiha from here out.

[@pmags1331]

Do you know if is coming out with a complete metric socket set ?

[@egbluesuede1220]

Been really interested in all of these MOD Box sets KT is coming out with. The boxes themselves look interesting and I get your point about the tools pulling you into the packaging system. But for those who are into other "packout" systems, I'm wondering if the Etsy community will be able to 3D print adapters to attach these to other systems? Is it even feasible or too dissimilar?

[@marquisethomas5611]

So innovative & the price is right !

[@4acae86]

Umm… what’s the part number for that compatible ratchet set. I can’t find it.

[@Tooling_with_Newman]

Great video touched a lot of subject good job

[@TestSpaceMonkey]

How hard is it to coax the inside trays out of those boxes? I could see cutting/printing custom liners for application-specific kits. You kind of stumbled into demonstrating the problem with such a modular system: it's easy to misplace the part you're after. A kit with a bright open space for each item makes it harder to just leave one in the dirt or the engine bay.

[@apennameandthata2017]

Not easy at all. You would have to cut through full-strength plastic. Or easy if you have the right tools.

[@mikecurry6847]

I love these through hole sockets but I've found that they're a lot easier to break than regular square drive sockets. I've broken a few of them on things I was surprised by

[@briankinney7022]

Am I missing it? I can’t find that bigger ratchet set anywhere online.

[@PSUCharger88]

Doc any chance you can put the links to all of the stuff you show in the description? I use your channel to find all of my shopping needs haha

[@markdotson607]

If you drill a 1/2 hole in the bottom, you make a pass thru nut driver!

[@shaymic20]

question do they fit in a standard 11 in 1 handle? having a fixed handle as a backup driver in the tool pouch would be ideal

[@thenexthobby]

Typing this on a Saturday, I'm glad I have time to re-visit their 11-in-1 (32500 HD non-ratchet version) bought 4 months ago and tossed into the drawer after one use. Perhaps I did not spend enough time as a child with my Lego set, but there's a learning curve. I did not appreciate the factory grease (without it, will this thing corrode?? ) and how long it took to assemble whatever bit I was trying to assemble at the time. I clicked on this older video because of a recent MODBox video. I'm interested in the kits and desperately need to get away from large toolboxes filled with sockets and wrenches I can never locate no matter what divider system I buy into. This system might be my ticket off the merry-go-round, but I'm not thrilled with the prospect having everything together but taking a long time to put together.

[@enice617]

The only problem I have is that all these tools seem to be too heavy for what they are. I understand the impact aspect, but weight is important to me

[@michaelmartin2262]

Now I need Klein to make a bacho like crescent wrench(with pipe wrench teeth on the other side with the klein proprietary pass- thru socket on the other end. Crescent has something similar and with a 1/2, 3/8 adapter it has been a game changer for me as a backup ratchet when I am at work.

[@tylerriddle4627]

Klien needs to make metric 😭

[@TuffHtKingswood]

They have started dude. Hold on.

[@tylerriddle4627]

@@TuffHtKingswood cannot freaking wait

[@coreybolt1985]

They do now.. just got my set .. imperial and metri. Flip deep sockets

[@TuffHtKingswood]

@@coreybolt1985 7mm?

[@jdelrey750]

What set(s) are at 4:18? Looks like a 32934 and ?

[@kerplunk38880]

A solution without a problem.

[@keysautorepair6038]

Snap on sockets are regular flank drive and flank drive plus.

[@rickvug]

Interesting system. Besides pass through is there any other advantage over going with the Klein 7 in 1 impact flip bits instead? Can also be driven multiple ways and hex isn’t proprietary. Only disadvantage I’m seeing so far is that you loose pass through.

[@edsherwook5196]

Now how the hell do u get just the ratchet? Got the sockets but need the ratchet and they don’t sell it separately anywhere as far as I can tell

[@bretburns7105]

I don’t see these boxes for sale anywhere?

[@wyattbreymeyer4033]

i love the couple weras that i have but i already own that impact 11 in 1 im sold!

[@user-bg4wk6nh3b]

Are these passthrough sockets compatible with the gear wrench/crescent ones? No reason this couldn’t be a standard like square drive. I have soooo many since they are only sold in a complete set. Hopefully Klein will sell single sockets as the whole plan goes to shit if you lose one & have everything except what you actually need.

[@drscopeify]

Very cool system. The sockets might be due to chrome coating but I am not totally sure.

[@someguyontheinternet-]

Forgive my ignorance, my question is about that KT-P2 bit from that original modbox. That bit being tapered, couldn't one simply grind the tip down until you hit the proper size? I only ask because it seems a simple solution, although i do understand that wasn't the purpose of this video.

[@omnimesh4096]

Can you provide a retail link and Klein part numbers please?

[@daveonezero6258]

I'll throw those in my pack out thank you very much.

[@williamfrye552]

Why all the small sets of sockets? Why not just full sets ?

[@andrewpate9157]

Where did you buy these? I am having trouble finding the ratchet wrench sets, also did the Klein 32500HDRT come in a mod box? I found the driver but doesn’t come in any type of case.

[@williamfrye552]

I would like to see a drop test on these plastic ModBoxes.............

[@pedrocervantes7561]

I feel like Klein is always a step behind as far as quality,

[@aplaceoncebelonged]

The Phillips #2 broke on my 3200hd 11-in- 1 after only 2 months. I couldn't find the exact replacement on their website. They only had the non impact rated 11-in-1 bits which have different bits types paired together. Any advice on where to find them?

[@davidpkm]

Crescents been making pass through sockets like this for about 10 yrs.

[@ReebyPlaysGames]

The ratchet for the passthrough is trash after a month. Keeps locking up and have to bang it on something to free it up. Wish I could use it more because It works great in panels.

[@MrNoobed]

>that ratcheting screwdriver handle *neuron activation meme* Is this what its like to be stuck in the snapon truck...

[@Deven210]

I have that screwdriver, by far the best one I've ever owned.

[@unionse7en]

But do they make mini mod boxes that are empty for storage?

[@only1muppet]

Funny thing, no homeowner will ever need a pass thru driver. I’ve worked on cars, houses and forklifts. I’ve only ever come across a need for a pass thru drive twice in 40 years.

[@cervuscanadensis5634]

That’s a good point.. very useful in commercial and industrial construction though

[@fredcsensits4476]

If only you can find these. Having a hard time finding them at lowe s or any other place

[@tladoux]

Klein just needs to make a square handle so it does not roll away, off your bench or whatever. However, I love their quality.

[@brn169]

So I watched this video having recently purchased the pass through ratchet set and thought the 11 in 1 impact matched drive would be a great addition. Followed the link from the video and ordered one off Amazon. Just received it and they are not compatible? The extension shaft is too big to fit into the driver handle. What am I missing?

[@lastbesttool]

Did you get the ratcheting 11-in-1 handle?

[@brn169]

​@@lastbesttoolactually ordered it from Amazon using the link in the video.

[@lastbesttool]

My mistake. I included the wrong link. Email me a shipping address and I'll send you mine for your troubles. Sorry about that.

[@brn169]

@@lastbesttool actually it was me not paying attention. I have the 3/8 larger pass through ratchet I just saw (and purchased) the smaller passthrough 1/4 drive set and realized that was the extension you had shown... All good, love these! Thank you.

[@rf159a]

I was an electrician for over 40 years. Klein Tools were the go-to tools for us electricians. I'm retired now, but I wish I had these Klein Tools when I was still working!! They are fantastic!!

[@henrybui6353]

Klein must be forever missing them pesky 10mm sockets

[@Sylvan_dB]

That looks very interesting, but I have a lot of Wiha 4mm bits. That 3.5mm decision by Klein is giving me huge negative stimulus. So not interested in another bit standard 0.5mm off what I already have.

[@Captain-Donut]

🙏❤️ Love from Scotland ❤️🙏

[@alpha42069]

the design is brilliant but i hate fumbling around with so many different parts to get going

[@davidvonwald4467]

I’m positive my beloved snap on 1/4” soft grip ratchet can walk on water. I know because the salesman told me so😉

[@greedygringoprospecting6941]

on the snap-on SDDD101. instead of the torx bits use 4 different straight screwdriver bits and 4 different phillips bits. 8 screwdrivers in 1. out it in your back pocket have a good day

[@apennameandthata2017]

I’ve got the four boxes. The compatibility is NOT great. Just get the two big boxes (precision and 3/8 drive) and a few hex drive bits if you want and you have everything covered. I WISH SOMEONE HAD TOLD ME THIS.

[@EveryTongue]

Super cool

[@TheJefferson]

that bolt is not a 14mm, its a grade 8 bolt, and you can tell by the hashes on the top. Metric fasteners are not graded with that type of identification. that is probably a 9/16 bolt. Otherwise great video!

[@SWANSONBOTTLEHEAD]

I can't believe you're just getting that replacement from klein. I feel like you first mentioned that like 18 months ago.

[@lastbesttool]

I first mentioned it in December 2021.

[@michaell5806]

Where are they made? Taiwan?

[@apennameandthata2017]

USA AFAIK

[@michaelbuddy]

Doc I think it's fair to say that the klein adapter male-to-female you're referencing here is comparable enough to some bicycle cranks to call it a spline drive. It may be proprietary but it should NOT be patentable in my opinion.

[@TedRussell-c5n]

I have a small Gear Wrench set with this drive, had it for years.

[@carlmccoy662]

My Klein multi nut driver would be OK if the rubber on the handle did not spin around the yellow plastic. It is worthless for anything more than hand tightened.

[@cwcadventures9987]

Why do they have to be made over seas though

[@madjackgamingandfitness498]

The klein stuff is neat. But realistically all the boxes would get thrown out, the bits organized into holders, and the tools in a drawer or roll up bag. Space is a huge factor and as much as I have liked the cases tools have come with, it is not viable to take up so much area. Open one drawer and be done with it instead of locking and closing 5 tabs.

[@user-zz8ln3uh5x]

My first thought was also how much wasted space there was in those boxes... especially if space is at a premium like I imagine it would be for overlanding. I like the concept of the boxes interlocking and automatically locking, but perhaps the inserts could be torn out and replaced with something more efficient.

[@gf2e]

I agree with you. It looks really nifty and tempting. But after thinking about the efficiency, it’s just not space efficient enough for me to be happy. I have the Harbor Freight flex head 1/4” ratchet kit. It’s very space efficient. Much more than these Mod Boxes. I have mine stored in a small Tom Bihn shoulder bag. The tools in these could fit but the cases wouldn’t.

[@madjackgamingandfitness498]

All we need is more socket sleeves like makita has and really all I would need is the one roll up bag fir half of my work.

[@Lord_zeel]

I'm also put off by the lack of metric sockets. I dont really want to invest in the sslystem until I can actually get everything. My Chevy has metric hardware all over in it, it's not as if being American means I can just opt out of needing both sets of sizes. Both are everywhere, sometimes right next to each other. I'll be really interested in a complete 1/4 and 3/8 set with both SAE and metric all in one box. That's a box I might keep.

[@elaczi]

Love it. 👍👍

[@keithw3208]

He hid the fact that the 3.5 mm bit adapter is non magnetic.

[@jcoul1sc]

Need to use iso stamped tools, think only wiha is

[@TerrySumpter2007]

Crescent tools did it 8yrs ago

[@epikplatypus11]

Why is this system any different than a bit holding screwdriver and 1/4" dr. to 1/4" hex drive adapter? Pick any bit you like, slap it in the adapter.... Put any socket you like on the 1/4" dr. Sure you can connect this system a bunch of different ways but in the end you are left a screwdriver or a ratchet, no? I don't see the advantage of having to connect 4 different adapters to end up with a regular P2 screwdriver.

[@atomicsmith]

I think the pass through feature is the real selling point. They just made sure it’s workable with their other systems (which is smart). I don’t think they are pretending this will replace all your drivers or dedicated screw drivers.

[@xavianboone6839]

Sir, I don't have the money to buy more tools right now.

[@Doc1985]

The problem occurred in December of 2021? It took Klein over 2 YEARS to replace the bit?