10 Great Tool Gift Ideas ● For the Handyman or Handywoman !

● 10 Tweezers .... amzn.to/38jKhFV
● 9 Multi ScrewDriver .... amzn.to/3rpT4hl
● 8 Flashlights
PocketCarry .... amzn.to/3tyZddf
HeadLight .... amzn.to/3vJtbhc
BallLight .... amzn.to/35CjHtE
● 7 StudFinder .... amzn.to/3lKM8tb
● 6 3M Hearing Protection .... amzn.to/30my6ny
● 5 Steering Wheel Tray .... amzn.to/3TMvgmm
● 4 Fluke Voltage Tester .... amzn.to/2OdVHnM
● 3 Scraper .... amzn.to/2O8dOeQ
● 2 DeWalt Laser Level .... amzn.to/3kTKyV7
● 1 3rd Hand .... amzn.to/3sXuiFr
CANADA
● 10 Tweezers .... amzn.to/2MU0zOm
● 9 Multi ScrewDriver .... amzn.to/3qqR6f2
● 8 Flashlights
BallLight .... amzn.to/3vHAW7l
PocketCarry .... amzn.to/3tAMt5Z
● 7 StudFinder .... amzn.to/3cS2hZB
● 6 3M Hearing Protection .... amzn.to/3ellBRg
● 5 Steering Wheel Tray .... amzn.to/3v5tyAb
● 4 Fluke Voltage Tester .... amzn.to/3rpUloD
● 3 Scraper .... amzn.to/2OcZ9zd
● 2 DeWalt Laser Level .... amzn.to/3kSdzR4
● 1 3rd Hand .... amzn.to/2PHUENv
or MY STORE
● www.amazon.com/shop/chrisnotap
● www.amazon.ca/shop/chrisnotap
Here are 10 really great tool gift ideas for any occasion! Great tool gifts for men, women, boyfriend, girlfriend or the handyman or handywoman in your life. If you're looking for a tool gift or present for Fathers Day, Mothers Day, Birthday, Christmas, any of these tools are perfect! All make great gifts for any occasion!
Full transparency. A small portion of each sale goes from Amazon's pocket to Chris's pocket with no additional cost to you! It helps support my channel and is much appreciated! Thanks!
Music: Coconuts by MBB soundcloud.com/mbbofficial
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/2vear96
Music promoted by Audio Library kzbin.info/www/bejne/bZ-yq413bddsjZo

[@chrisnotap]

Here are the links to all of the tools ! USA ● 10 Tweezers .... amzn.to/38jKhFV ● 9 Multi ScrewDriver .... amzn.to/3rpT4hl ● 8 Flashlights PocketCarry .... amzn.to/3tyZddf HeadLight .... amzn.to/3vJtbhc BallLight .... amzn.to/35CjHtE ● 7 StudFinder .... amzn.to/3lKM8tb ● 6 3M Hearing Protection .... amzn.to/30my6ny ● 5 Steering Wheel Tray .... amzn.to/3TMvgmm ● 4 Fluke Voltage Tester .... amzn.to/2OdVHnM ● 3 Scraper .... amzn.to/2O8dOeQ ● 2 DeWalt Laser Level .... amzn.to/3kTKyV7 ● 1 3rd Hand .... amzn.to/3sXuiFr CANADA ● 10 Tweezers .... amzn.to/2MU0zOm ● 9 Multi ScrewDriver .... amzn.to/3qqR6f2 ● 8 Flashlights BallLight .... amzn.to/3vHAW7l PocketCarry .... amzn.to/3tAMt5Z ● 7 StudFinder .... amzn.to/3cS2hZB ● 6 3M Hearing Protection .... amzn.to/3ellBRg ● 5 Steering Wheel Tray .... amzn.to/3v5tyAb ● 4 Fluke Voltage Tester .... amzn.to/3rpUloD ● 3 Scraper .... amzn.to/2OcZ9zd ● 2 DeWalt Laser Level .... amzn.to/3kSdzR4 ● 1 3rd Hand .... amzn.to/2PHUENv Full transparency. A small portion of each sale goes from Amazon's pocket to Chris's pocket with no additional cost to you! It helps support my channel and is much appreciated! Thanks!

[@TheDrivebynerf]

Like the scraper and studfinder. That scraper rocks

[@LaineyBug2020]

The little olight camping light is super cute, and the red light mode would be wonderful for bedtime to trigger melatonin production!

[@dawnagrey149]

These are great! I want them all. Thanks for doing the leg work Chris.

[@ashiengher131]

This is my first time watching your videos. You make me wanna go shopping for tools I need, or maybe don't need at all but want. Thanks.

[@shawnhagerich2559]

love my Olight Prerun 2. I'm an electrician, and since we're usually the ones that cut off the power on the job, headlamps are a go too. I don't know why more trades haven't figured it out. Also, as an electrician, please build a better test lead. Get a cord that uses 12 awg wire. Those lamp cords extension cords burn down more houses than anything else. Great vid. Imma look into that scraper. That looks amazing!

[@mstanton1ful]

I use 5 of these items every day at work. I need the flashlight and tweezers. Great tips too.

[@riverrat1149]

Like the door way clamp trick.

[@fishnhomeylod462]

I love Uncle Bill’s, give them to everyone and have been using them for about twenty years. Good video.

[@thedustmancometh]

Passing thought- I’ve done the same thing, and found a deal on P38 military can openers, so everybody’s getting one this Christmas!

[@ZachDames]

The "picking the right shirt" segment cracked me up haha! Great video!

[@LuigiLong]

Very interesting, informative and entertaining, all-in-one, and you used correct spellings too! (Ex-pat from the UK, living in the USA)

[@chrisnotap]

Thanks for that!

[@kkrankie]

Just used a set of third hand jacks, to install some upper kitchen cabinets. I couldn’t believe how much easier the job was with those babies!

[@andyperrett4015]

I never thought of using a butter knife , might throw that in the work van . Excellent list

[@holsterissa]

This channel is so wholesome i love it

[@10FingersWorkshop]

i’m watching all the videos in this channel just for the openings

[@casikamodern3596]

Thank you for the video. I have number 10 & 9 and those tweezers are with me everyday. And I am going to look into those flashlights. They are just what I need to replace my bigger flashlight.

[@bluenoser1567]

Wow! Really useful tools. That steering wheel tray I can use as someone who drives for a living and eats in my truck daily, it's just brilliant.

[@PersonaN007Grata]

I really appreciate that you demonstrated practical applications with these tools! You don’t usually see that on KZbin. Thank you.

[@chrisnotap]

Thanks for that feedback!

[@oddynuff2785]

I rarely comment. I just have to leave a "Thank You" You helped me find a Christmas Gift for my father and you remind me of my humble Grandfather. Hope you have a Good Day, Sir. Keep up your great work 🤗

[@chrisnotap]

That is awesome! Thanks!

[@richard2720]

Well done sold sold sold 👍

[@colbysmith9218]

That was, without a doubt, the best small tool & gadget video I've ever seen. And, clearly, you use all of theses, know them well, and trust them. All of them were incredibly practical as well. I recently paid a ton for the most fancy-pants stud finder I could find, thinking that maybe this one would work well...but all it does is bleep, flash, and cross signals...and the display shows a dazzling array of useless information. The one you reviewed is amazing. I intend to hunt one down for myself. I''m also saving this video for my husband to watch later..we love a good gadget video! :D

[@chrisnotap]

Wow! Thanks for that great feedback!!

[@seansullivan3795]

Super cool video! Thanks Chris!

[@winkfinkerstien1957]

I wish I had seen this when it was uploaded 2 years ago. LOL. These are practical gifts that I would like, and my adult children would also like. Thanks for the video. I'll need to check out your channel so I won't miss anything. 😎👍🏻💯

[@chrisnotap]

I made another top 12 gift ideas video in Nov also. I think youll find more stuff for your kids to buy lol!! Here it is....kzbin.info/www/bejne/f3jYdKWMo513oKs

[@winkfinkerstien1957]

@@chrisnotap Thanks! 😎👍🏻💯

[@markfriesen1435]

The sound you hear is me chucking my terrible stud finder out the window so I can get that nifty Franklin one! What a game changer

[@RobertBeckk]

My buddy has one similar, I hate it. with the stanley one I have you can turn the stud finder and essentially you can triangulate where the sensor in the stud finder is and find the exact edge of the stud every time. I never miss studs.

[@dalebabbitt6185]

@@RobertBeckk what you're saying about the stanley sounds interesting but I'm not sure about what it is you mean. Can you elaborate? Thanks

[@RobertBeckk]

@@dalebabbitt6185 if you tilt it, imagine a crooked picture frame. The stud finder will beep differently, essentially you mess with the stud finder enough and you can pinpoint exactly where the stud starts and ends. I may upload a video to explain.

[@dalebabbitt6185]

@@RobertBeckk the video would be appreciated, thanks

[@michaelinminn]

I feel Christmas is coming early to my workroom!

[@chrisnotap]

Yes, we'll call it Covid Cabin Fever Day!

[@nmarkose]

Oh hey I used one of your videos to build the squirrel proof bird house. Me and the birds thank you!

[@PacoOtis]

Chris, you are good! Thanks for NOT having music! Whew! I'm a retired home repair guy and appreciate your advice and will pass your site to some younger repair folks. Your presentation is clever and has an excellent flow to it and your script is mature and fast paced. Best of luck! Also, hope you have worked as an instructor as you are so good at it.

[@chrisnotap]

Wow! Thanks for that honest and appreciated feedback!!

[@matthewmurray1857]

Another good gift I'm making for my dad is a chess set made with bullets for pieces I used a pipe cutter to design the pieces

[@georgekabacinski]

Several items worthy of a closer look. Thank you for the video

[@chrisnotap]

Thanks for watching!

[@barryallenflash1]

WoW! What a great video! Thanks! I'm always looking for little gadgets that can help me with my projects and I think I may have found a couple.

[@BobHerres]

Great Video Thank You! Super stuff !! - with excellent links for instant shopping too!

[@justnoted2995]

Very good; as long as you stay true to owning, using, and recommending... and not marketing stuff

[@pmdun45698]

Love the steering wheel desk. Great idea. 👍

[@chrisnotap]

I use that thing way more than I thought I would. Very useful gadget for the car!

[@pmdun45698]

@@chrisnotap My wife and I often go for Sunday drives and prefer eating in our compact vehicle. Truly the best gadget we've purchased in years. Thanks for all of the research you do for us. 👍

[@chrisnotap]

@@pmdun45698 We do the same. Sunday drives. We also do a McDonalds drive through breakfast every Friday and sit in our car at the pier and watch the boats come and go, people walking their dogs, cyclists and enjoy the sunshine in our Rav4.

[@hawkowl455]

Chris, Jo said it for me also, every one of them I can use at my place. Thank you for your time in research.

[@chrisnotap]

You're welcome!

[@jugsannx5716]

I love this video😄👍👍

[@girlnextdoorgrooming]

Need to buy my dad a color changing shirt like yours.

[@zelphx]

Very informative and not too "wordy". Three of these made it to my list. (Have one tool already)

[@MatSmithLondon]

Hello! I have a slightly higher end Dewalt laser with three lines and have been using it for a few years regularly. On a building site where studs are exposed. So I just keep screwing the mount in. I always get annoyed it can’t be adjusted up or down quite enough. And soon the walls will be boarded up with plasterboard so that won’t be an option. I’m always annoyed I can’t just quickly put it anywhere. Your ideas with the square and the clamp were genius. Bravo! This will change my life in a small but meaningful way! Thank you. It was ingenious and I loved it!

[@MrJdsenior]

The push through bit design is genius, no lost bits. They're going to sell a crap load of those stud sensors, what an improvement. I can see where it might even be handy to own two of those jackable 'holders' for doing cabinetry, etc. In the right positions on the cabinets it would take almost no effort to install a cabinet straight and level...positioned properly it would probably hold it hands off, leaned a bit to the wall and slightly toward the center of the cabinet, each side, and further from the wall than the CG, on anything short of a slick wall. Thx Chris, great stuff, as always.

[@jackpavlik563]

I was looking at my 3m headphones just as you went into the review. Good to know you are as discerning as myself…

[@SHENRAR]

the plethora of ways you can attach the laser leveler got me laughing so hard XD

[@nenadmarkovic7998]

After watching your presentation im convinced I need all of these tools. I'm serious. Thank you. I'll just have to budget and get one at the time....

[@destinedforthefire7916]

Some great items. Now to find them in NZ

[@ragmanintx]

Been using the Franklin for a decade or more. Concur that there's nothing better. Strongly recommended.

[@beatfarmerfan]

I think I’ll be getting a few of these. Thanks Chris!

[@richard2720]

Excellent thank u very much that was all very helpful. PEACE

[@paulwaite8019]

+1 on the Dewalt laser. I bought mine last summer for a tile project. Works great!

[@stevel8397]

Only if I could get my kids to watch this, I may get a GREAT Christmas gift

[@latindoggy8059]

Send it to your wife

[@billhutton9185]

Great to see you back again! Thanks for posting. Loved the stud finder.

[@onsapplikasies8620]

excellent list. Thank you.

[@blainechanner6985]

Chris, most of the videos on KZbin are something to waste your time on. Your videos are not like that at all. Informative, worthwhile, instructional, with just a touch of that wonderful Canadian humour. Really, really glad that I subscribed.

[@chrisnotap]

I appreciate that!

[@j.m.7056]

Thanks, now I know what to get for my handyman brother. He does so much for me around my house -- so unusual and useful tools are a perfect way for me to say thanks to him!

[@dcvariousvids8082]

Normally I look at such presentations and find 1-2 gizmos I could one day need. But on the whole, have either never needed in the past and or are never likely to need in the future. However, your selection of gizmos with brief description and how-tos, have highlighted two things. I could use all of those, as I’ve needed them in the past and made do with what was to hand, sometimes with frustrating results. Plus, I’ve evidently not got nearly enough handy gizmos, that could actually be both easy to us and useful in their own right. Thank you. Now off to the links and make my list.

[@Jameson4327]

There’s a few items I’ll be looking for. Thanks

[@chrisnotap]

All of the links are in the description.

[@TheUnofficialMaker]

I have that stud finder and it really is the cat's meow!

[@lafamillecarrington]

That stud finder is amazing: so much better than the one I have, which is one of the ones that you have too! I also loved the De Walt laser level. And the rest.

[@andojay]

I want all of these tools

[@victorcuenca8285]

Amazing video, you're great

[@ktrump5882]

Thanks Chris. This is EXCELLENT!!!!. I will certainly put these on my wish list. The #1 is just out of this world. 🇺🇸🤙🏽

[@kevinr6497]

Outstanding selection! I have worked in both commercial Construction and Demolition, I own 3 of the 10 items listed, will be shopping for the rest. The tweezers are priceless! With that nice multi- bit Canadian made screw driver, it will also accept big box store =(cheaper) replacement tips, you might want to put your good bits and spares in an Altoids tin with a rare earth magnet and hide it in you pocket as no one but a jerk will steal your nice driver if there are no tips with it... just my experience

[@mike41062]

Some really great practical tools! Most lists are kinda for a niche, are completely random, or are the sane items (carpenters pencil, speed square, etc).. Loved your list and how you showed how well they worked. Love the ball on that scraper, it just makes total sense and probably really helps with leverage and comfort.

[@buckaroundandfindout]

Much love.

[@fitzphillips5370]

I got the screwdriver and the voltage tester!

[@bssn9469]

Great, thanks! I have the electrical tester, now I want the rest!

[@woundedmonk1884]

The olight baton flashlights are great. I've had one for about 8 years.

[@pmrich7035]

You can get a lot further than 20 feet away with those 3M Bluetooth hearing protectors. Love mine

[@jowesticles]

Great vid as always chris

[@chrisnotap]

Thanks 👍

[@jesusdanielhernandez6304]

As someone who works in construction, I appreciate this list, some of these are definitely going in my toolbox

[@chrisnotap]

Great to hear!

[@jcastanza]

Ok 👌🏼 I will have a few things for that to bed I need

[@jcastanza]

@@chrisnotap and is it just the one

[@armanavagyan2477]

@@chrisnotap do you still make smoking videos ?

[@oldfart9287]

Am in the UK but this stuff is on Amazon so watching this has cost mw another good few pounds gotta stop looking at youtube

[@Flushual]

I am so grateful for this list. I was just wondering yesterday what gifts I could get my father in law, who I'm sure would live every item on your list :) thank you for posting it!

[@chrisnotap]

You are so welcome! All of the links are in the description! Thanks

[@ulrikaschloss5848]

That 3rd hand will really help me as I do all my renovations by myself. Thanks again for making our lives easier with your vast knowledge (videos). Be well.

[@chrisnotap]

You are so welcome!

[@SawsetTools]

Your easy to listen to, and entertaining. Thanks

[@chrisnotap]

I appreciate that! Thanks for that nice feedback!

[@grods20]

Love your content sir... And loved this list... I made your Home Depot buckets vacuum, simply the best.... Big hug from Monterrey, Nuevo Leon, Mexico...

[@chrisnotap]

Thanks for that nice feedback! Greeting and Happy New Years from Canada! I also made another top 12 tool gift video for 22/23. Here it is ..... kzbin.info/www/bejne/f3jYdKWMo513oKs

[@tadlautner]

I have all of these items except for the screw driver and the light. These are all a must have for any one that does handy work of any kind. Also a note about Franklin Sensors. They are one of the best customer service companies. I dropped my sensor down a elevator shaft. I sent it in to see what could be done they sent me a new unit with a check for my shipping.... Super Cool

[@chrisnotap]

Wow that's amazing that Franklin did that!! Thanks for sharing that.

[@susanmorris9790]

Such a great post! Now I know what I’m giving for Christmas and birthday presents. I want one of each for myself. Thank you!

[@garbo8962]

As an electrician would recommend the voltage sensor that had a double forked ends so they can be used on Tamper Resistant receptacles that are in all newer homes. Great tools.

[@dandersonanza]

Franklin also makes a version of that stud finder that is half the size of the one shown. I prefer it to the larger one because it fits well in the bottom of a tool bag.

[@angusmacduff3471]

I have had an Olight Baton for a few years - I'm in my nineties and very active but I have eye problems from old age and have to use the light all day for just about everything. It's great to slide the clip onto the visor of a cap and use it as a head light. I would highly recommend getting one. It is small and charges up from the computer - about once a month.

[@1944chevytruck]

AWESOME GIFTS!.... thanks 4 video. be kind.

[@chrisnotap]

You bet

[@megapangolin1093]

Cracking video. I can watch these well researched ideas all day. Well done and thanks.

[@chrisnotap]

Glad you enjoyed it!

[@habl00pep]

Great video

[@chrisnotap]

Thanks!!

[@reakelly9795]

I've subscribed because I've learned a ton by just watching one of your videos. Thank you so much

[@chrisnotap]

Awesome, thank you! Thanks for subbing!

[@petruzzovichi]

A New Subscriber in North Idaho who knows you are brilliant... Many thanks Mr. Notap.

[@edwardfletcher7790]

These are some really excellent products, great quality at reasonable prices ! Thank you !

[@chrisnotap]

Glad you like them!

[@missmymountain]

10:50 I became subscriber. Many channels similar to yours call out the obvious, but the corner bead is a secret kept close by those that work in the trades or by those with genuine ingenuity. I've used that trick for about the past 7 years and haven't seen many others that pick up on it. Either way, I'm a supporter. Great content, well presented!

[@deviant4life25]

We missed you Chris!!

[@deviant4life25]

@MichaelKingsfordGray troll. Every comment u leave on people’s channels say “coward” lmao learn a new word troll.

[@charleswalters4390]

Wow this is the best list of tools I have seen in a very long time! Maybe even the best. I could Definitely use several!!!!

[@chrisnotap]

Thanks for that fantastic feedback!!

[@ReadyUpGo]

Just discovered this channel. Smart, well made videos on various subjects with a common theme - doing more with less (some exceptions). I recommend and have subscribed.

[@insanejughead]

Wow, this was TOO useful! Will definitely be buying some of these items. Thank you, Chris!

[@chrisnotap]

Glad it was helpful!

[@zoekilling4977]

I seriously love your channel!!! And thank you for supplying the links to these great tools!!

[@jonathanmiranda5541]

Genial el vídeo 🇵🇾

[@ydfw.jaden2]

my man be doing free sponsers

[@dws2313]

Chris, I have missed you! Glad to see you back. You do such a good job on your videos. Looking forward to the next one!

[@thatotherguy4245]

Great list, no unnecessary filler... thank you

[@chrisnotap]

Glad it was helpful!

[@snteevveetns]

Cool stuff

[@dennismitchell4836]

I'm an electrician and I have the same stud finder, it really is great!

[@sooz9433]

Wow.. those are pretty cool gadgets and I appreciate seeing exactly how to use them. Thank you for sharing.. and yes the shirt you settled for was perfect!

[@cosudu3002]

Excellent list. I see a gift in my husband's very near future.

[@jheurtin1120]

Best stud finder is wallabot. Hands down best

[@chrisnotap]

Do you find it to be accurate? I was considering getting one to do a video on.

[@jheurtin1120]

@@chrisnotap yes its accurate. It's a little more expensive than an average stud finder though.

[@jwpallett]

Very good show

[@konstantinusstoyanov9749]

Clever count down