Interesting Scrap eWaste Items - Power Tools

Good e-waste pickup today so I thought i'd add to the interesting items playlist as there was so much interesting things from this one pick up.
Just a bit of fun showing all the goodies in this pile.
Keep scrapping & have fun!
Scrapping tools, safety gear, metal melting furnaces, crucibles and ingot moulds that I use or recommend.. www.amazon.com...

[@maryannrussell7255]

Amazing. That man was very generous. Wow. I was drooling.

[@gasworksend4blues]

That's a nice bunch of wood tools...not bad, scared me to death when you playing with the planer blade with the power still on.

[@riverrat1431]

gasworksend4blue's I'm a woodworker using all of his tool score like you say my anxiety level really went up when he put his fingers on that blade while it had power to it . please be safe with your tools sir

[@rastamanralph6670]

Me too! That's what the guard is for to make sure fingas don't go anywhere near the blades!😱

[@bantalee2002]

Cool to watch you go through that stuff. Ben,.I really scored really big yesterday while out combing through everyone's large garbage stuff. Around in my area there are many folks who are well to do(except me). Anyway i walked up to a large box, i looks in it,low and behold the gods blessed me with a brand new power washer. I was looking at the engine and the home owner walk up to saying that it was taking up space in his garage. The man told me he went to start it up(after putting gas in it) instead of running, it blew out a big puff of black smoke and failed to run for him. He called the company,they replaced what he thought was a blown engine. He said i can have it. So i took it home,i drained the gasoline out of the small tank,i took the spark plug out and dried and cleaned it. Turned the switch to on,pulled the choke and be darned that the engine had started to run. People toss out valuable stuff.. That power washer brand new like i found it is 350.00 off the store display. So yeah I got me a brand new power washer. The guy looked like he lacked mechanical skills. My gain..lol

[@mikeyd845]

at 48:30 you had drywall screw guns and they only activate with pressure on the screw very good quality guns they are working fine and the black threaded cones adjust the depth that the screws are set at

[@jeep2003]

Yup and those makitas are the best ones iv used compared to other brands

[@rastamanralph6670]

I got one and they are not cheap 2nd hand.U can get over £50 on eBay for one.Don't know how many $$$ that is!

[@jeep2003]

Those extra large 9" circular saws are worth alot too. $300-500 for a new one and hard to find

[@evemebufor313]

The makitas are also used on assembly line for building towers for home computers. That faucet was very nice....mine leaked so badly I took it out. Makes the kitchen sink look funny.. awesome p\u

[@DominicUbble]

Your a good man Ben. You deserve the nice thing in life like this and never feel guilty for being blessed. Call it karma or call it God blessed. You do good things in your life and it comes back around to you. : )

[@judybeckner9047]

You scored thousands of dollars in tools, what a nice friend you have. A big bottle of whiskey for him would be nice. Thanks Ben

[@SeanTHirsch]

The 3 blue ones have drywall bits on them. Put screw on and push and it will spin. Great tool

[@henrysohbatian6405]

The big saw that you could not open is called a chop saw, there is usually a pin near the rear hinge that you pull out, that is the locking mechanism.

[@eatiegourmet1015]

That's the same as my 10" DeWalt chop saw. ("Compund mitre saw", actually) I got mine for $75 USD at a moving-house sale. Can't even describe how useful it has been! You are a Very Lucky Man! to score all those tools! And, btw, I called out that Makita router before you opened the manual. Oh, you Will Use it! You will Get skilled! When you move to your farm, you will be doing so much "Family Handy man" stuff on your place!

[@henrysohbatian6405]

The three screwdrivers are for putting drywall screws in, they have a guard on them with a clutch so the screw can only go in a certain distance and not tear the paper of the drywall.

[@theaussienurseflipper.8113]

Author is for screwing plasterboard onto the wall.

[@ernestpetzrick7741]

I really enjoy the unusual pick ups. Very cool - thanks again for sharing.

[@MIGASHOORAY]

Certainly got a big win there Ben. He doesnt want the GREAT TOOLS BUT he wants the old bins back!

[@keithhaycraft3765]

I wouldn't be surprised if he had to replace the tools because they had depreciated so far they were (officially anyway) worth nothing & the builder had to buy new tools for tax reasons.

[@emmetmyers]

it funny how little he know about tools. lol You got a lot of nice stuff this time. I wish i had half of it. Maybe i'll start scrapping again.

[@E-BikingAdventures]

The miter saw should have a button or push/pull pin towards the back of the arm near the pivot point. You are very unique. Not too many guys would not recognize a router.

[@SeanTHirsch]

Never touch a blade of a power tool while plugged in if you have no clue how to even push the pin to raise the blade. All I saw were your fingers getting knocked off by the plainer or the compound miter saw

[@eatiegourmet1015]

Didn't count the times you said Coppa, but I think you said "Wow!" about 50 or 60 times. And for good reason! I said 'Wow" also! Nice video!

[@marks.6480]

Metabo is an excellent German brand mainly used by professional builders - and priced accordingly!

[@carolmoore3706]

I love that big mitre saw

[@johnferris6680]

The makita screw gun at 47:00 is a drywall screw gun. You put the screw in and push it through the drywall and it sets the screw without pushing through the paper. Great video Ben!

[@evemebufor313]

Keep one of the heavy duty hammer drills in case you ever have to scrap ,,,say an 18 wheeler, ... Lol, buggers, right good find sir. Congrats.

[@judybeckner5623]

Thanks for sharing Ben

[@danielluma2948]

Ben I'm from Ohio in America have fun with what your doing

[@AllStarExt]

Just watching some old videos and 9 months later u have figured out what everything is but them hammer drills with the flat chisel bits are good for braking open transformers. I pull mine out every time I scrap a microwave

[@americasfavoritehoarder]

You hit the jackpot.

[@danielluma2948]

Ben you can get a adapter insert for that light socket. By the way I'm just a small scraper nothing like free stuff cool this summer I putting a shed up for my scrapping I take drills grinders and all the motors apart anything electronic I take it apart for copper ,like what your doing cool I strip all wire for copper have fun and work at haven fun doing what you like

[@bdk_pickin8159]

The makita screw guns are high rpm and when you place a screw on the end and push down where you want the screw the cluch engages and puts the screw at the depth which the end peice is set at. If set right the screw only goes to the desired depth. Great haul ben.

[@shaneyork300]

Great video. That's thousands of $ if you were to buy it all that new! WOW!!!👍👍

[@errolwi]

Didn't read through so maybe someone already told you. The. 3 Makita screwdrivers are used for installing drywall. They don't spin until they have pressure put on them then it slips when the screw is countersunk into the drywall to stop it from pulling through.

[@savonjannamies6957]

I think those drills in 48min have hilti type connection, so you just push drill bit to hole in front and it locks in place. And when you need to change, you just push sleeve back or perhaps forward? to unlock bit. Greetings from Finland, i have got plenty of good information about your channel. Keep up good work!

[@nzwotb2525]

43:47 that's a router it's used to cut the edges of wood I use them in my woodwork class at high school

[@jetman1963]

Very happy for you Ben! Nice Score! Like Christmas Santa was very good to you!

[@fakenoobyup5492]

Hi Ben...Those first 2 blue Screwdriver drills are for Gyproc installation ..the screw is held on the Alum.end when its pushed on the wall its stops rotating so it wont break the surface of the SheetRock and the screw itself is fit at the required distance from the wood support backing. it takes a while to get use to the trick of working these "drills"

[@davidrethmeyer3800]

That is the older Paslode finish nailer I wish I had it for parts I have had mine for 10 years it was used when I got it so not sure how old it really is .

[@mtube620]

in one stop, you got more power tools that me

[@p3top]

all ways watch Ben for the E wast stuff but im a carpenter, that plainer will do more than trim your nails need those fingers to make your videos happy new year .keep the saws all sell the drywall guns push the hidden locker pin with a driveron your dewalt chop saw nice score great pickup look forward move vids in the new year . your new suber from Calgary Ab Canada . Joel

[@patprop74]

48:43 if no one answered, they are drywall drills the end is a stop to prevent driving the screw in to deep. BTW Ben Anything with blades lol BAD touching while plug in hahaha the big saw is a dewalt compound or AKA chopsaw, there is a pin in the back right side you need to pull to release the head lock.

[@emmetmyers]

the makita screws guns are for drywall they set the screw only so far into the drywall. Thay coat us about 80$ used last i checked. nice guns i used one for years each day. you can adjust the screw depth with the black ring. When the screw is set it makes a grinding noise that is normal. the rotary drill you just push the bits into it and use it. nice it comes with a chock for normal bits . use the rotary drill for drilling holes in concrete The saw saw (saw you thought was broken) it takes a allen key to install blades into. the front is worn but should still work good. mine is only a year old and looks the same. the large dewalt chop saw. you open it with a lock (looks like a small ball on a shart) on the back upright. then please don't cut off finger. I use mine for all my 2x4 cuts. ryobi (rusty saw) will have 10 or more years in it with light use and maybe 5 with heavy use. it's a dam good saw. sink fuset about 100 us each nice score sell um so they get used. Ramset Dynadrill Model 345 Rotary Hammer like 200 on ebay is the us....

[@DominicUbble]

I imagine you can go online and download and printout an instruction/owner manual for that laser level

[@crphililps2594]

hi ben.....the screw driver you didnt know is for driving hex bolts.....like roofing screws and others with smaller head.....or plaster....(drywall for usa residents)

[@keithhaycraft3765]

Ozito is Bunnings own brand. Surprisingly good for the price. That one can be used as a hammer drill, small jackhammer & the chuck allows it to be used as a normal, timber or metal drill. Be relatively gentle when using it as a jackhammer & for tile removal. While it is good, it does have limitations.

[@keithhaycraft3765]

The thing with the red lid contains grease which should be topped up from time to time, especially when using it as a hammer drill.

[@mauriliozamora6627]

Hi Ben, i would like to say that never, ever put your finger on a saw while it's plugged in my friend. Always keep any power tool that in get because they might come in handy someday. If you plan on having country property you might need them to fix something plus power tools are very expensive. Thanks for showing us all the free goodies you got. Stay safe my friend. PS I been watching your videos and i enjoy them very much !

[@robzombieshot]

Laser levels great for mounting pictures level, putting up shelves as well as basic landscaping and checking the roof. If you have a broken timber and a corner of the house is bad messed up, or even a little, a dab of water n you grow mold in the house. So you can check everything inside and out. If you want to paint, or put up chair rails, etc .

[@laughingachilles]

I cannot believe someone threw out a Metabo tool. Those things are industrial grade and can be repaired if something is wrong.

[@keithhaycraft3765]

They are very high quality too. My old mate used to say they had extension cords for leads. I have been using a Metabo screw gun for over 2 decades & it still comes back for more.

[@brettwatty101]

Put a cheap tungsten carbide blade in that drop / mitre saw and you can cut aluminium with that.

[@robertevras6577]

That jack hammer spade is used for digging into really hard rocky ground. You can even use it on really warm blacktop, but not concrete that’s too hard...

[@rastamanralph6670]

The rotary drill u Got u slide the rubber bit back on the chuck then push the bit in then release the rubber bit and the chisel should stay in.

[@jeromeywills3301]

The 3 drills with are sheetrock drills it puts the screws in so they don't pull through the outer paper!

[@danielluma2948]

Then three drills you got if you're putting up drywall and you don't want to mar up the surface of drywall them are the type of drills you need to use when putting in drywall screws they just sink the head of the screw barely in the drywall surface you can also use them for plywood sheet metal plus you don't lose the screw .they don't drop off the drill . Cool tools

[@robzombieshot]

Router is great for edging wood, scribing etc. Dif variations of edge trimmers. If you buy wood to build or plan on building that house, then you def want to hold onto it. Once you buy any wall trim, you can buy the least expensive one and spend a few seconds to trim them vs paying 2 or 3x as much for pretrimmed stuff. Allows you to be more diverse n not running to the store buying dif types of trim.. i may be a girl but i an 5th of 6 kids 5 boys. Grew up working on cars, motorcycles, and construction. Then ranching on up. By the time i hot to college, i knew all those tools inside n out. Then i did my work study in stage construction, costume design and much more. Im also a lic cosmetologist. Always creating stuff.

[@imunique7469]

Awsome Ben u sure got spoiled u hit the mother load of tools. Lol

[@lilerb1313]

Wow! you got some GREAT stuff! good for you!

[@TheRuhrpottGamer]

I know its too late after 3 years, but you switched on the laser of the level and put it back in the box. But great scorem you deserve it

[@rookierollhunter8652]

The screw drivers are clutch drive screwdrivers. You need to put pressure on the tip when using them.

[@Kamal_AL-Hinai]

I guessed that

[@toomaskotkas4467]

Ben, don't put your fingers on the blades or any part that rotates when you have the power tool plugged in. I would hate to see the camera lens splashed with your blood.

[@DadSkool]

i doubt he would be able to upload it if that happened, you know, with no fingers

[@jeffreyhansen2419]

Haitachi saw sall is probobly the most usefull tool you got you can tell because it has been used a lot!

[@MIGASHOORAY]

Put a screw in the end and when you press down on the screw it it comes into contact and screws in the screw. Easy as.

[@t.giddey4080]

Metabo Tools are Big Bucks in the States , Good for You Ben . Just Don't Scrap it , That Would Be a Crime . Cheers Man !!

[@cass276]

The router is a 'plunging' router, you push down on the machine after you fit the cutting head on to the shaft, and the head cuts ornamental grooves into the timber below.

[@danielluma2948]

That's a nice mytor saw you can use that for trim board and if you want a clean straight cut that's the saw to use ! Also use it for Precision cuttings angle cuttings that router you use it for rounding off of countertops counters benches edges you can also use for make a door like fancy doors that you see in some houses ! That hammer drill you can drill holes in concrete to secure some of them brackets that you have pickup scrap ! Secure a building down in the concrete that little orange hand saw that you picked up that small little small blades you can also get it so you can cut tile with that also you have some awesome tools that you picked up there nice ones very handy for what you're doing

[@EuroRecycling]

Awesome tools!

[@plumbob916]

Ben those sheetrock screws stick down in there to the magnetic meal you leave the drill running then when then you touch the sheetrock screw to the sheetrock it engages the drill and only sync the drill in to the surface of the sheetrock

[@plumbob916]

You got about 10 grand worth of power tools there.... including all the bits

[@keithhaycraft3765]

You scored really well there Ben, many of those tools could be used for bartering purposes or, a good source of tools for an Apprentice just starting out even Mens' Shed might appreciate some of them. Ask before you give them the tools though, they may have a surplusof some tools & sell them as a fundraiser. You may as well have that money yourself. Another place you might want to donate them is to somewhere which uses power tools to help ex-Service personnel suffering from ptsd.

[@scooterllm]

The Ryobi circular saw is for left handed person. The circular table saw is a mitre saw for cutting angles. The router is a plunging router.

[@jfox9572]

Ben that hitachi saw @20:10 is a sawzall we used them in construction we even used them in auto body it is by far the most useful saw you will ever own and they all look like that after a few uses i'm sure it is in perfect working order it will even cut through nails, wood ,copper transformers,anything on any angle they just had too many tools 38:30 is a miter saw i have that same one cuts 2x4s wood trim use to make picture frames door trim window trim don't scrap these it would be wrong your very fortunate, get someone to show you what cool things you have i spent a lifetime buying these tools Goodday mate

[@keithhaycraft3765]

We call them a reciprocating saw in AustraliaAustralia because of the action of the blades. They are great for demolition purposes.

[@gateke1]

wow what a jackpot lot of tools, even better then treasure hunting! 22:00: your need was so high the universe has provided you one :D, from the outside looks like a minion :D, u can even learn new languages : elektrische gereedschappen thats dutch, :)

[@reddragonstacking5247]

You made out like a Bandit are you sure you didn't knock off a tool shed lol any of the tools that you don't want to keep i think a great way to thank the guy that gave them to you is to take them down to your local TAFE College and give the tools to a young apprentice just starting out that may not have the money to buy new tools straight away it would give them a good head start in the job.

[@NeilJones65]

Those are for screwing drywall screws into drywall when hanging.

[@dnuttall2363]

I would move to oz just for the e waste great vid as usual m8

[@vanphan7727]

Good luck to u with finding your country home ya u r spoiled but u deserve it and adorable too😉😀

[@DadSkool]

those makita screwdrivers are to put up plaster, you can adjust for the depth you want the screw. the bit only spins when you have it on a screw. Heres a link in the reply below

[@DadSkool]

makita screwdriver on ebay www.ebay.com.au/itm/Makita-18V-LXT-Li-Ion-Brushless-Cordless-Drywall-Screwdriver-XSF03-BARE-TOOL/302476205693?epid=1140239874&hash=item466cfc9e7d:g:WCsAAOSwc1FZ1Hf4

[@bernieyatessr9835]

They are dry wall tools . the screw bit is a magnet and hold the screw .

[@carolmoore3706]

Don’t you just love tools I do 😂

[@atvr100]

Those last three drills are for drywall work and they are working fine

[@fakenoobyup5492]

Amazing Tools Ben "Spoiled Child".... a real Bonus Pickup Hey ! i am sure you took a few beers after this !

[@larrywalker3137]

Your three blue drills for drywall screw drills to put in screws in drywall

[@MRWonderingHaggis]

Awesome video

[@donniebrown2896]

Keep the Bosch, DeWalt, Makita,don't know bout metabo. Lot of times power tools especially drills only need brushes replaced. I've replaced them in my dewalts for 4-5, dollars each. Ryobi is entry level home owner stuff. The first paslode gun is toast. Great score the hammer bits are very pricey if the tips are in good shape. Like these vids better than the marathon picks. Good job brother

[@rastamanralph6670]

U put a screw on the end of the screw gun Phillips end and when u push on it against the wood the screw spins in.they are used for dry wall/ plaster board.

[@Derbyhobbiescrapper]

Ben how do you scrap the power packs on computer leads please help are they tranforers

[@robbuechner3647]

Makita drywall screwgun. Put the screws in, hit the trigger and push it to the drywall. Itll activate with pressure.

[@Frank-bh3cm]

You only need so many rotary hammers. Might as well keep the best condition one and flog off the rest.

[@kimwilliams7051]

great video nice tools Ben

[@leslarsen5903]

dam ben. I am a contractor and you scored $1000 plus in us dollars in tools. good score!

[@ohraa1]

The screw drivers are dry wall guns the Phipps heads are activated when you push the screw on the drywall it is the guard that makes it so it doesn’t go all the way through just enough for the rappers to mid over it

[@ohraa1]

Tappers*

[@ohraa1]

Mud*

[@utube3805]

wow Ben 1K+ in tools nice !

[@NeilJones65]

That Spade is an asphalt breaker spade.

[@eatiegourmet1015]

@22:xx A theodolite -- surveyor's tool. ("Thhee ODD o'light")

[@digofthedump]

wow a case of whisky more appropriate u got a set up there . ps the chop saw with a metal lade + scrapping ??? nice score

[@pederlindstrom3132]

Didn't read all comments but that is called "mitre saw". Got a few at work, even battery operated and they are De Walt.

[@gortnewton4765]

Keep all those tools that work, you'll need them when you get that country property and you'll want to build stuff.

[@robzombieshot]

Lol the saw you couldnt get the blade into has a release button that locks closed n locks in new blade but you NEED to press it to open to insert or release blades. Its a safety thing.

[@grizzlybeardave611]

Makita drywall hanging screw-guns the cone sets the depth of the setting of the screws for countersinking

[@SuperAllan1965]

there for putting up drywall the 3 screw guns

[@jfox9572]

51:00 $1000 worth of faucets good on ya love your channel

[@GilSkillz]

Looks like you acquired about $400 or more worth of working tools! Congrats bud! Great find! You have Skillz! ;)

[@jfox9572]

you mean $4000 worth

[@1betterthan]

Nice vid thanks Ben..

[@rubyred8845]

Massive cool score, better than Bunnings!

[@grizzlybeardave611]

The reason the second Ramset sounds rough is because it's in the hammer-drill setting, they can be used as a drill or a hammer-drill...

[@RafalScrapper]

46 50 those screwdrivers is a special tool for screwing gips plates on walls 😃😃😃

[@creep_factor]

The pad on that ryobi sander might need replaced. The hooks on them wear out and it won't hold sandpaper. I've replaced one on a Dewalt and one on a Porter Cable. Oddly enough, both used the exact same pad.

[@rastamanralph6670]

The Makita screw gun u picked up after the first drill is worth £50 uk on eBay.I know I got one!

[@Dianekosovich5014]

The screwdriver will Engage when you push on a drywall screw and stops when you bottom out so you don’t drive the screw too far into the drywall