Intex Excursion 5 Modifications Overview

[@arvidisaksson7902]

Found this after 7 years from upload.. still one of the better on youtube STILL. Nice work

[@bagerton]

This is of the greatest projects I have ever seen on KZbin. I just purchased an Excursion 5 to have with my grandson. Great Job Peter. God Bless

[@padywac1970]

How’s the inflatable working out for you?…..me? I’m 250, this didn’t work out to well….looking for a bigger boat.

[@my8isenough]

Mod Podge! Heck yeah Peter. That stuff is magic. Apparently, so are you Peter! This MOD is hands down the BEST I’ve ever seen on KZbin. Congrats for that alone. I imagine you must have a lot of patience to do this kind of work. I’m always in such a hurry, but I can tell you took your time to get everything perfect! This is an exemplary piece of ingenuity and craftsmanship. Bravo Bravo Bravo!

[@susannehaeusler7444]

This is amazing!!! I am a single raising mother with a 7 year old son and a dog. We live in Switzerland and just last year we started fishing. I was looking for a easy to move by one person fishing boat solution and my budget is small but my expectations are high. Thank you so much for this perrrrfect solution!!!

[@peterpham4846]

Thanks for watching Susanne! Its a great fishing boat for lakes and rivers without the modifications. The modifications made it more enjoyable for the long fishing trips and just hanging out on the boat.

[@SONIDODJCORTEZ]

this is 5 star rating fully built raft props to you and your talent

[@bagerton]

I purchased one and we took it out today on Big Creek Lake in Mobile. I have not made any modifications yet but will be working on it with your recommendations. Thanks again awesome video

[@Zer0.-_]

This is one of my favorite mod videos. looks so clean, geometrically proper, ect. Why someone would want a Jon boat over what you've just done here stuns me.

[@peterpham4846]

I only wish the OEM would make this boat hull with a better graded material. This would be perfect if the hull was stronger and puncture resistance. I would buy the better hull in a heart beat if they made one!

[@Zer0.-_]

Peter Pham I plan to take this in relatively gentle lakes and not get too shallow if I can, so hopefully I won't have any puncture problems

[@CloverStarz]

+Peter Pham its called intex mariner 4 they even got stronger ones but cost more.

[@mrsbro4429]

@@peterpham4846 did u keep getting punchures do u still have the same one from 5years ago

[@GrantFoxOfficial]

Now THIS is awesome

[@ChrisG9978]

That's Intex Excursion modification on a whole new level. I picked up an Excursion 4, simply added a 1/2" plywood floor, sanded it, added outdoor carpet, and some pipe insulation to the edges. Also added the motor mount and a 55 lb thrust trolling motor. Beyond the plywood floor, no further substantial mods...wanted something that was easy to set up and take-down, maintaining portability while adding some extra options to make the raft a decent fishing rig for calm waters. Curious as to what your modified Excursion weighs in at as filmed in the video...looks like you'd need a trailer to transport at a minimum.

[@jeffliu3123]

Excellent modification and video. The way to put on the registration number to this inflatable boat is brilliant! Thanks.

[@peterpham4846]

Hi, Thanks for watching my video. The registration numbers were made with modpog and plastic backing. I also used an exterior sealer to protect it from salt water.

[@hellosweetheart3350]

Dude, you are in the wrong business LOL. You've got talent!!

[@ronaldc8634]

It doesn't matter what you do, it matters how you do it.

[@CaitlinFarar]

FOR REAL! Can I get those plans? Lol that is exactly what I need!

[@littleitaly83]

Yeah for real. I was actually just thinking while watching this that I'd pay you to build this for me. Alternatively, I'd pay you for the plans too. That means you've got a marketable talent bro.

[@keith6717]

Great job. Can you give us an update? How is the boat holding up? Can you make a video on the mod of the motor bracket? Thanks.

[@airborne501]

This is awesome... Intex should hire you to design their next boat.

[@peterpham4846]

Thanks! Hope you will like my new PowerKat boat build too. I am in the process of cutting all the parts out now. I will be posting video this week.

[@northcoastpower-washingllc6609]

@@peterpham4846 So, you gave me a winter project. Lol.

[@ranchdressing1037]

awesome setup. I prefer a lounging position at the bow... can't wait to try for myself!

[@COOLWEBOFFERS]

Man, you pimped that boat out.!!

[@roywilliams6070]

Great job Peter!! I have a smaller Sevylor I want to take in the motor home. Just an inflatable bottom does not cut it though. Just finished the floor. Carpet and foam pipe wrap around the edge. Waiting for glue to dry. Awesome Peter!!

[@Gabeasher699]

Hey peter thanks so much for all the videos and advise on the forums! I live in Manitoba where there is lakes everywhere there’s actually one in the middle of the city that I live in like a block away so this is perfect! Just got my excursion 5, now to start the mods lol. I’ll post a video when it’s done thanks again!

[@peterpham4846]

Good luck on your mod.. I really enjoy building mine.. I am almost done with my catamaran and will post it soon..

[@Gabeasher699]

Peter Pham thanks man and awesome can’t wait to see it!

[@ronaldc8634]

I would love for you to explain how it's all made so I could follow along and make my own!!

[@jklop7856]

What were the angles and measurements for bending the galvanized pipe?

[@Jesse-lt4jr]

I'm obsessed with this! My fear is if I put all that work into this boat and if it pops or something, then all that work is ruined :(

[@pipcatchers1979]

how did you connect the pipes in the back

[@djpabloliveproduction9860]

Thank you for that video. Solid and stylish project ❤

[@ACGTV222]

That is amazing! Very professional looking. Just bought one and would LOVE to do this! Do you have the details of design and measurements and affiliate links to products you used so I can make sure you are compensated when I puchase them? Thanks!

[@TheLawCoyoteTLC]

You should add a roof for shade using 1/2 inch pvc pipe and heavy duty tarp like the one the boat is on. Then add a couple of flexible solar panels. Nicest project I've seen so far

[@okyjose]

would you be able to show your motor mount mod in detail? I really like your setup for it, thanks for the videos.

[@peterpham4846]

I will try and do a video on the motor mount mod ASAP. The mod will allow you to put a bigger motor on the boat and increase the boat speed if desired. I think going above 3.5HP might not be a good idea. The boat rubber bottom and seam lines might not be able to handle fast speed and beating it will take with a bigger motor on it. Specially when you are going fast and hitting big waves..I don't know if the boat was design to handle it.

[@darrelm47]

@@peterpham4846 Yea, I am ready to do my motor mount modification and would like to see more detail on your motor mount

[@Hunter__14]

can u plz do a video on how u hooked up the electronics, for those that are not electronically incline, awesome set up

[@peterpham4846]

sorry for the late reply...I need to take my boat out of storage to do this..just been so busy with a new business and working at the same time..I will try to do it once the weather is better here...

[@mariosilva5549]

Great job. But. Where You put the sonar for the fish finder? Or how?!

[@SharonFitzgerald]

Great video! at 5:32 - Where did you get that 3-plug voltage indicator? and do you running lights, and blue lights all plug into your battery box? are they USB or run on a battery pack? Thanks 🚤⚓️😃

[@willie1511]

Hi Peter can you explain how you mount the 1/2 pipe for the motor?

[@varrogepjavito]

I agree with @bagerton, this is amazing. Probably the best modification I have ever seen to this boat. I'm jealous.

[@patrickgarrett9866]

I live in Moses Lake and this would be a perfect setup for shallow waters. Thanks for the inspiration!

[@Jango975]

Peter Pham how does she run with this load , is there a video ?

[@koolhandduke4087]

Peter Pham--WOW!! Impressive. I have seen a lot of customization of inflatables, have even customized my own. Nothing like this though, GREAT JOB. The best I have seen.

[@peterpham4846]

Thanks for the kind words! I will have more video this summer on how to build this boat. Please subscribe and see how to build one the same. It pretty easy to do.

[@filmigs4875]

Peter Pham give credit where credit is due

[@filmigs4875]

KoolHandDuke www.thehulltruth.com/boating-boat-show-photos/599694-intex-excursion-5-inflatable-mod.html

[@bunnyfoo98]

I just love this!!!! Great job, I'm currently working on the floor of my excursion 5. I already have a Minn Kota Endura C2 30#. I had to do my floor in 2 parts so that it fits into my Jeep. Later down the road I may do more if I have a better mode of transportation. All I have left to do to the floor is put on some kind of covering hoping to finish it tonight!

[@peterpham4846]

Sorry for the late response, been working on a wooden boat. You guys will love this one, very easy to build yourself too! Once you got the mod done for the IE5, it will be very fun and comfortable to use for fishing or cruising on the water! Thanks for watching! Good luck on your build.

[@stephenrichardson5618]

Curious why you didn’t go with a Bris inflatable boat. Would have been a better platform for all of that awesome work you did

[@jesusbenedettisr677]

Is there anyway you can share the measurements and supplies that you need to do this modification modification. Thank you

[@joedanvers1010]

Incredible, the attention to detail!

[@stuffychicks1196]

Is the floor of the boat inflated or do u pump it then put the board floor over it?????

[@micklosquadro5562]

Awesome job! Where do I get those cup holders?

[@carnagie85]

That is the best setup I've seen yet! Great job and you should do another video of you using it.

[@peterpham4846]

Sorry I been busy working on other project. I will do a video on the boat performances and the trolling motor I installed on it soon. It's a Haswing Osapian 55lbs motor.

[@darrelm47]

The bars you used to support the motor mount...how are you securing the bars from the motor mount to the galvanized pipe (its covered by your "shelf" in the video) ... any info you are willing to provide is appreciated

[@45caminiti]

man you did an outstanding job on this boat, looks great!

[@peterpham4846]

Thanks for watching and positive comment.

[@Vidal_Marin787]

Did it sank??

[@johnmariano249]

My question is how do you transport the boat to the lake? A trailer, car top, truck? Certainly a beautiful job of transformation no doubt. I am selling my bass boat after 16 years and now am 70 years old. I love my Intex Excursion 5, and bought it to enjoy the virtual lightness of maneuvering it around. I need the stability, and would love to do what you did, but I would have to find a way to transport the boat with all the extra weight you have added. Thank you in advance for your comments. John M

[@peterpham4846]

The boat sit on a trailer a year round. My friends have the boat now and it launches from the trailer. I cover the bottom with a special sealer that reinforced the sides/bottom and protects it from punctures and scratches.

[@Superave.]

Can you go in to depth on the motor mount what are the galvanized pipes fastened to ?

[@0619AllWell]

Can you send me the link where you bought it looking for the best price

[@patrickbreese9133]

Hi..are your boxes attached to the floor?

[@tyleringram4330]

Do you take it apart every time after you use it or do you have the boat on a trailer

[@EricFishKing]

Dude this is awesome. Do you still have it?

[@JulioCandelaria]

Beautiful, very clean! Well done, hope you don't mind I may copy some or most of your work!

[@mycady1]

nice boat. you should make an assembly video to show the transom bars in more detail.

[@peterpham4846]

I do have a lot of detail on the transom bar support. I will do a video on it soon when its a little more warm here. I have three boats I am commission to do for people. Thanks for watching my video.

[@tysonsydenham5614]

Peter Pham I am also interested how you did the transom bars, thanks for the video

[@GCLaredo207]

Wow. What a great video. You have added a lot of weight to this boat. I am curious what battery and motor you are using? How do they perform with all of this weight? Thanks!

[@miguelrodriguezmar87]

It's nice mod is it still running strong after 3 years

[@arrowheadfrenchies1274]

If you add the wood flooring do you still have to inflate the bottom ?

[@chuckyeissler3081]

Hey are the boxes mounted to the boat

[@KNJ846]

This is a bad ass setup! Do you have instructions how you built everything? I'd love to do something similar. I'm a DIY'er as well

[@bruceborneman]

Gorgeous! So professional looking and everything has a purpose! Nice! My main problem is that my 14 year old pup pup can't move freely around the boat. I'm 270 and my wife is around 180 so I'm trying to figure it out! Do you have any suggestions?

[@svoxo87]

this makes me so excited to get my boat in the mail! can't wait to start modding it with my dad! this is great motivation! Also from WA! :) hello!

[@peterpham4846]

Thanks for watching. You will really like the boat once it have been modified. I really enjoy riding the boat on the lakes and ocean. I do a lot of trout, salmons and crabbing with this boat. I can be out in the water all day and not get tired or uncomfortable in it. You will like the ride on Lake Washington. I have no issue on Lake Washington with this boat but for other boater coming in to see my boat.

[@svoxo87]

what kind of motor do you use on your intext?.. I've been watching and researching and I don't expect to go top speed but I still want something that can push. I'm thinking of a motor of 3.5? Suzuki or Mercury? or how heavy/how fast can this type of boat take?

[@svoxo87]

also would I need to register my boat even with 3.5 or less motor? I read that you would only need to register it or have a boater License if it runs over 15hp.?

[@peterpham4846]

I got a 55lbs electric trolling motor on mine boat. It give me plenty of speed to cross one end of the lake to the other and more. You can put a more powerful gas engine on it but you will need to mod the boat transom to support the heavier motor! My transom support system is integrated into the boat floor frame and it hold up the original OEM motor support mount. I think 3.5 is pretty fast for this type of boat and plenty of speed. I use my boat for fishing and crabbing, not for speeding on a body of water. The hull material is not strong enough to handle a very high speed cruising.

[@peterpham4846]

Boat Title, Registration, and Renewal To navigate, operate, employ, or moor your vessel in Washington, you must have a title from the Washington State Department of Licensing, a registration card, and registration decals, unless your vessel is: A canoe, kayak, or not propelled by a motor or sail.Less than 16 feet in length and has a motor of 10 horsepower or less and is used on non-federal waters only.Is properly registered by a resident of another state or country who uses Washington waters for 60 days or fewer. You don't really need to register it if you don't plan on going to Lake Washington or the ocean. the Inex 5 is 12' long and your motor is under 10HP. I didn't register my at all and was stop by a game warding. He didn't even ask about my motor or if I had a registration number for the boat or not.I even ask him about it and was told most lakes are not federal control in WA. I only register it because of crabbing season and wanted to drop my crab pots away from the piers.

[@jasonsanitz5623]

Wow man, very well done, you made a heck of a boat out of that!!

[@peterpham4846]

Thanks...Please subscribe as a got more video coming soon...I think you would like the catamaran build I am doing.

[@jasonsanitz5623]

@@peterpham4846 I enjoy the creativity of people, there are a few projects I would like to share as well, maybe I will start a channel as well. Keep up the good work, as it encourages people to good things as well.

[@robertpowell7527]

Very nice looking work you did!.....Tell me how you load your boat into the water.....Is it too heavy to carry?

[@joseesquivel1979]

Peter can you help how to register my boat please love what you did with the boat

[@peterpham4846]

Take the paperwork that came with the boat to your local DMV and get it register. They will used the hull number ID on the OEM document to register your boat. You need to check with your local DMV process on how to register the boat. I had it register in the sate of Washington. Its was very easy to do.

[@joseesquivel1979]

Thank you am in California

[@davidcapone1606]

Do you know what model cupholders those are? I have been trying to find the exact function without success. Also, the bars you used to support the motor mount...how are you securing the bars from the motor mount to the galvanized pipe (its covered by your "shelf" in the video) ... any info you are willing to provide is appreciatex

[@micaharnold6814]

How has the excursion been so far

[@expomm]

Awesome mod! Can you share the measures of the floor, I am planning to buy one and make a floor as yours.

[@leticianunez3822]

superbly ,and exquisitely done, hell of a job their Peter she is looking super sweet I liked the way you customized so much it inspired me to purchase one ,can you tell me the dimensions of the floor thanks Peter I gotta admit I have a small Honda so iam just putting a floor and buying some folding chairs and it should fit at least I hope and thanks again Peter great job

[@peterpham4846]

Hi Lecticia..Thanks for watching my video..I traced the flooring with cardboard for a template and used that to cut out the flooring. The shape is hard to provide a dim for...the flooring dim basic measurement is is 8' x 4.5'

[@roywilliams6070]

I just put a floor in my 40 year old sevylor k106 caravel. Bought in Germany when I was in the Air Force stationed there. I’ve been having trouble finding good inflatable seats. Thanks for the idea of a small light folding chair. Solves my problem. Thanks!!

[@GetInShapeWithDavid]

Really well done! Nice job. I get mine tomorrow. Thanks.

[@jujulyonjones]

How did you attach your box seats

[@bagerton]

Peter, do you have any video of it in the water?

[@peterpham4846]

yes..my friends have a lot of it at Sea Fairs,,,just trying to get them to send to me...Please subscribe..i am trying to get 1K subscribe so I can post more videos..Thanks for watching!

[@BrandoKOmmando91]

I was ready to do away with my excursion 5 after 2 trips to the lake. now I'm super excited to customize it like yours! thanks for sharing your boat, very cool! I have 2 questions. 1) do you keep the boat inflated even when not in use? 2) how do you transport the boat?

[@peterpham4846]

Hi Brandon, Thanks for viewing my video! I keep the IE5 inflated all year long. It seat on a special launch system I built for this boat type. I made a flat dolly system with 12" wheels so I can push the whole setup into my truck bed. Once I arrived at a lake or water ramp, I drop two steel ramps down the back-end of my truck and roll the whole system straight into the water. I push the boat right into the water and roll the dolly launch system back into the truck bed. I will make a video of the flat dolly launch and retrieve setup soon. This is a lot better then pulling it on a trailer. The end of the boat does stick out of the truck bed but I just add a lot of RED Flag on the back during transportation of it.

[@tysonsydenham5614]

Peter Pham I was hoping you might do a quick video on your transportation system. I just ordered one and I am really interested in how I can transport this without buying a trailer, it would defeat the purpose in my opinion. I know it's been awhile but weather is getting good so I am hoping you can help us out a bit. Thanks a bunch for your ideas

[@tysonsydenham5614]

PS I also live in Washington, on the snake River 😀

[@parkerglenn8981]

@@peterpham4846 did you ever put a gas engine on this boat? If so how big did you go? I was thinking of do a 212 predator mud motor build. You think that would be too much for this set up?

[@andyberrios8713]

what do you think would believe a sufficient lb of power from a trolley to move the boat. Because im thinking of getting a 40lb one but im not sure now if its enough... thanks!

[@peterpham4846]

Andy Berrios get a 55lbs or above!!! I had a 38lbs trolling motor and its very weak...specially when u got more then 2 people on the boat..

[@andyberrios8713]

great! thanks for the help!!

[@onniec8656]

How has the boat held up to thr wooden floor. Any tears to the seam between the boat floor and side of the boat? Very nice work

[@peterpham4846]

The floor is carpeted on the top and bottom with form tube on the edges! It has taken a huge amount of beating from my friends partying on it every year at Sea Fair.

[@blackdiamondjeweler2350]

very well done... best set up i've seen on youtube! thanks for the video and the ideas :)

[@peterpham4846]

Hey thanks for watching.. You will enjoy the boat of its mod.. My friends really used and abuse it!

[@MannyGunzz]

Freaking awesome man.. Just got this boat..

[@zboost300]

can you provide more info on the support bars for the motor?

[@carolynmitchell4735]

Looks very professional and overall Great job! I will be using some of your ideas for sure. I'm looking to put some kind of canopy on mine, to block out some of the sun. Gets pretty bad out there within just a couple hours lol really nice and i like it a lot

[@Guenz-fz4dj]

My question is: Do you use a trailer to load this boat or do you deflate it for loading on your vehicle everytime you take it out? If so, how long does it take you to set it up considering the amount of stuff you have to mount on it?

[@peterpham4846]

It seat and launch from a trailer.

[@Livefreeman]

nice. how do you glue the carpet to the wood? what glue do you use?

[@fattyninja4320]

Not sure if you covered this but how are you getting your boat to the water? Already setup on a trailer? Setup near the water then use a dolly or carry with two people? I'm thinking about installing launching wheels on a custom transom board so I can easily wheel it alone. Thanks and good job.

[@peterpham4846]

Fatty Ninja its on a trailer...push it in the water and go..really easy and fast too!

[@antoniomaria4096]

Nice mod indeed. Congratulations. Can you please give the boat dimensions in SI?

[@peterpham4846]

Sorry what is SI?

[@antoniomaria4096]

@@peterpham4846 International System of Units (SI, abbreviated from the French Système international (d'unités))

[@xxshevilxx]

How do you transport it? Do you trailer it or do you have to disassemble it and reassemble it everytime you want to use it?

[@peterpham4846]

The boat is on a trail and its launch from it. My friend has it now and he keeps it on the trail and inflated all year long. Thanks for watching. Please subscribe as got more video coming soon..

[@bigemugamer]

Sweeeet ride! All it needs now is a sail mount in front of the bow box.

[@davidc_ac9377]

wow this camera is trippy

[@MostBeautifulPIaces]

what size and model battery do you have for your trolling motor? And what is the name brand of the paint that you used to secure the bottom of your boat thank you!

[@backtothe80s97]

How did you attach the fenders to the side of the boat like that?

[@backtothe80s97]

So Peter, did you add a bottom to the box or is it just the box with the top? Also do the boxes screw to the bottom of the floor or can you move all of them? I just finished mine not as cool as yours but I hope you like it we can’t wait to go fishing ! Merry Christmas as well!

[@peterpham4846]

The box has a bottom to it. It's attached with four 90 degree locking latches. I used four screw wheel knobs to secure them to the latches.

[@backtothe80s97]

How did you attach the fenders ??? Like that sideways ?

[@peterpham4846]

Velcro...heavy type from Amazon. I got the one that came in a roll..

[@backtothe80s97]

@@peterpham4846 yes but is it waterproof ?

[@peterpham4846]

@@backtothe80s97 The Velcro is waterproof...it will not fall off...I had to use a lot of force just to remove them...

[@thsarethbreaks]

Do you use a trailer to carry the boat or do you put it in the back of a truck?

[@peterpham4088]

It's on a trailer and inflated year round. My friend has it parked inside his garage when not in used.

[@melathomas1326]

How do you take it apart to store it? How much was the total cost to modify it this way? If I buy one can you modify mine? Can someone who is 7ft y’all over 300lbs fit comfortably?

[@peterpham4088]

this boat will fit you and another person easy. The cost to mod it is around 250..I have most of the materials from leftover projects. I just bought the carpets, radio, lights, floats and drink holders. If you are in WA state its cheaper for me to mod or build you one..other shipping is very expensive.

[@Garage-wt5jl]

This....is.....AMAZING!!!!!!!!!

[@gurbnation3249]

Killer job on this man

[@Casanova0Tm]

question, do you guys deflate these when your not using? how long should you keep them pumped up?

[@ChesapeakeBayKayakFishing]

How did you install the fishfinder? Where did you put the transducer. I'm working on my boat now and I'm trying to get ideas

[@peterpham4846]

The fish finder is installed on the trolling motor. Its install under the trolling motor body. I have the fish finder transponder line running up the trolling motor shaft.

[@ChesapeakeBayKayakFishing]

Peter Pham are you able to send me pictures when u could? That's a cool set up. [e-mail]

[@peterpham4846]

Check your email. I emailed you the picture of my setup with the fish finder. This is the position most people mounted their fish finder. Your fish finder manufacture should had provided you with the mounting instruction options and positioning. The transponder is held by a big zip ties and the fish finder cable with small zip ties running up to the motor shaft.

[@jeredh]

Wow. Very impressive. Quality build

[@angelmartinez1955]

hey Pete just want to know what kind of battery use to light your boat up

[@peterpham4846]

Its a ExpertPower EXP12200 12 Volt 20 Ah Rechargeable battery I got from Amazon. Its power the radio and lights system. Works great and cheap, you can use a lower voltage battery to power the lights only since they do not required high voltage. I need the 12v for the radio only.

[@davidjones8303]

I am in the process of creating this for myself. What are the dimensions of the bench seats? Also, are your feet able to touch the ground while seated? Any trouble swiveling around with the seats in your configuration?

[@peterpham4846]

Here are the seats Dim. The front seat is 29"W x 18 1/2" L X 14" H; the center box is 29 1/4"W X 14"L X 14"H, the driver seat is 29 1/4"W X 16 1/2"L X 14"H. All the boxes are 14 3/4 with lids installed. Once I added the swivel and seat to them it made the height just right for me. I am 5' 9" in height, so when I am on the water it didn't feel so high up or top heavy for me.

[@josephroush3738]

awesome boat, I made a floor for my intex 5 works great

[@RobPGamerVaper]

Very Very Cool I have the Excursion 4 and its actually my only Boat of any kind I've ever owned I did have a Canoe way back But Financially this is my only option and over time id like to do some mods to it looking forward to a floor and seats at minimum

[@michaelorourke2208]

Can this handle waves in the ocean? Would you suggest taking it into the ocean? How many people do you think this can hold?

[@peterpham4846]

Michael O'Rourke I took this out to the ocean for crabbing season. I got a video showing us docking by the mouth of the port to the ocean after we dropped off our traps. This can handle the ocean great but you need a good strong motor on it. The hardwood flooring is a requirement for ocean fishing. It makes the boat bottom stronger against the ocean waves and a lot more stable too! I would only recommend four people Max after the interior structures are added.

[@strain121]

it's amazing most 2016 electronic can be replaced by something smaller/better in 2020. Next put a wind turbine to charge the battery. Stereo: waterproof bluetooth speaker. Lights: LED solar lights.

[@lindaegan4383]

what has to be done in order to transport deflated?