How to Master Your Music in 5 Simple Steps

Hi I'm Michael Wynne. I'm a Scottish audio engineer and founder of In The Mix. In this video I show you an approach for clean and transparent audio mastering.
Please watch my updated mastering video for 2021: • Master Your Music in 4...
0:00 - Intro
2:00 - Have an Aim
3:30 - Final Check
5:05 - Tonal Balance
9:45 - Sweetening
14:12 - Loudness
1) Have an Aim.
In this case I am using mastering as a final chance to catch any mistakes, trying to sweeten the song slightly and also make sure it is loud enough. I have an aim at all times in the process - even if it's an experimental part, I still know that's what I am doing. At each stage I ask myself "What am I trying to achieve by using this VST?
I also take time to get my head in the right place so that I feel creative and motivated to finish the project - Often overlooked but the most important step in my opinion!
2) Final Check and adding fades
Automate the master fader (this is after the effects chain) to fade the start and end of the song.
Checking - Listen from start to finish without tweaking anything.
Listen for :
Clicks, pops, cut breaths, clipping, bad edits, resonances (especially in the low mids), consonance, overly harsh "sss" in vocals, is everything perfectly in time etc?
The MIX must be good for a good master. Mastering is not a quick fix for a bad mix.
3)Adjusting the tonal balance.
This will help it sound good on all systems. Use reference track and compare to professional releases. If you hear that your balance is off you can use subtle EQ or go back to the mix to fix big problems.
I like using Tonal Balance Tool to help me get in the right sort of area but I always set the final levels to taste.
The EQ's I like to use are - Custom Series EQ, TR5 EQual, Eiosis Earth for the high pass.
4) Trying any sweetening.
Be careful here - we are not trying to FIX a problem, we are simply looking to give it that extra 1%. This could include saturation (Tape or Tube), Gentle stereo widening, Volume automation (macro dynamics), harmonic excitement and Bus compression.
I would be very cautious if you are new to these effects, it's best to experiment with them but don't feel pressured to commit to them. In time, this practise will help you master these tools and before long you will feel in control and be able to use them to help your mastering.
I demonstrate using the VBC to compress the mix.
Many types of compressors can be used and multi band compressors are often used too.
The aim here is the change the sound stage, "glue" things together and add some warmth. Immediately I was fooled by an increase in volume but after tweaking some dials it started to work. The threshold was adjusted until I could hear some gentle compression (I can't remember what the screen was reading but I try not to look at the screen. I kept a slow attack so that the snare wasn't being crushed, I adjusted the release to make it quicker so that it was more open and didn't feel heavy. Then I adjusted the High Pass Filter to make sure that the Kick and Bass were not being compressed (turned down).
This final step really opened the song back up. Please listen to the compression again and hear how the bass becomes HUGE after I turn the HPF Dial on the right!
The reality is that there are not many "go to settings" that work for all mastering situations. It's important to practise and get comfortable with the tools.
5)LOUDNESS- well sort of..
Mastering for online streaming makes life easier for us these days, we don't need to slam tracks super loud to be heard!
When exporting, check what the sites are currently asking for, sometimes these details change but most are asking for a 24 bit Wav file.
I recommend getting a track up to at least -14 LUFS integrated and then pushing it as far as you can without damaging it.
If you want to release your music after mastering, use my discount link for DistroKid here - The fastest way to get your music onto ALL streaming sites while keeping 100% of your streaming revenue
💸 Save money on DistroKid if you signup through my custom link - distrokid.com/vip/inthemix
Plugins Used:
Free Loudness Meter - bit.ly/youlean
Get 20% off for Youlean Loudness Meter 2 - PRO - Coupon Code: IN-THE-MIX
www.voxengo.com/product/span/
Purchased:
Compression - VBC Grey
Limiting - Ozone 8 Limiter (Any mastering Limiter will work, I used a few and pick my favourite)
🌍 My Website / Contact / Hire me - michaelwynneaudio.com
📱 Join My Discord - / discord
🎧 My Sound Banks / Preset Packs - inthemix.store
💸 Save money on DistroKid if you signup through my custom link - distrokid.com/vip/inthemix

[@inthemix]

Please read the detailed steps below if you want to get the most out of this video- Especially in Section 4 :) Tools used: Free Loudness Meter - bit.ly/youlean Get 20% off for Youlean Loudness Meter 2 - PRO - Coupon Code: IN-THE-MIX Free Loudness Penalty Analyzer - www.loudnesspenalty.com/ 1) Have an Aim. In this case I am using mastering as a final chance to catch any mistakes, trying to sweeten the song slightly and also make sure it is loud enough. I have an aim at all times in the process - even if it's an experimental part, I still know that's what I am doing. At each stage I ask myself "What am I trying to achieve by using this VST? I also take time to get my head in the right place so that I feel creative and motivated to finish the project - Often overlooked but the most important step in my opinion! 2) Final Check and adding fades Automate the master fader (this is after the effects chain) to fade the start and end of the song. Checking - Listen from start to finish without tweaking anything. Listen for : Clicks, pops, cut breaths, clipping, bad edits, resonances (especially in the low mids), consonance, overly harsh "sss" in vocals, is everything perfectly in time etc? The MIX must be good for a good master. Mastering is not a quick fix for a bad mix. 3)Adjusting the tonal balance. This will help it sound good on all systems. Use reference track and compare to professional releases. If you hear that your balance is off you can use subtle EQ or go back to the mix to fix big problems. I like using Tonal Balance Tool to help me get in the right sort of area but I always set the final levels to taste. I am not paid to promote this plugin but Izotope did send me a copy to use without pressure of showing it in videos. The EQ's I like to use are - Custom Series EQ, TR5 EQual, Eiosis Earth for the high pass. 4) Trying any sweetening. Be careful here - we are not trying to FIX a problem, we are simply looking to give it that extra 1%. This could include saturation (Tape or Tube), Gentle stereo widening, Volume automation (macro dynamics), harmonic excitement and Bus compression. I would be very cautious if you are new to these effects, it's best to experiment with them but don't feel pressured to commit to them. In time, this practise will help you master these tools and before long you will feel in control and be able to use them to help your mastering. I demonstrate using the VBC to compress the mix. Many types of compressors can be used and multi band compressors are often used too. The aim here is the change the sound stage, "glue" things together and add some warmth. Immediately I was fooled by an increase in volume but after tweaking some dials it started to work. The threshold was adjusted until I could hear some gentle compression (I can't remember what the screen was reading but I try not to look at the screen. I kept a slow attack so that the snare wasn't being crushed, I adjusted the release to make it quicker so that it was more open and didn't feel heavy. Then I adjusted the High Pass Filter to make sure that the Kick and Bass were not being compressed (turned down). This final step really opened the song back up. Please listen to the compression again and hear how the bass becomes HUGE after I turn the HPF Dial on the right! The reality is that there are not many "go to settings" that work for all mastering situations. It's important to practise and get comfortable with the tools. 5)LOUDNESS- well sort of.. Mastering for online streaming makes life easier for us these days, we don't need to slam tracks super loud to be heard! When exporting, check what the sites are currently asking for, sometimes these details change but most are asking for a 24 bit Wav file.

[@mattwave1251]

Can you support my label?

[@tsongyt7539]

In The Mix WOW This tips helps me with my big problem👏👏 thank you for this..cause i spend most of my time in mastering

[@Youssofhatemmusic]

8:24 you say that some rumble under 20 hertz are created and u can hear them because your headphones go to 5 hertz down but humans can hear starting from 20 hertz :D so i am confused

[@la1ce]

I should listen to loud "asses"?! :O

[@cashmir8495]

Youssof hatem No headphones go down to 5hz, end of the story

[@jjwhittle8873]

"Often people push it a bit too loud" - understatement of the decade

[@gregoryamato858]

of the millenium

[@bhaiagrlefthendmyhotoxkane163]

Sir I. M from Pakistan can you made my song master please reply my Punjabi commercial style song I sing

[@SpritelySolutions]

Is funny though because the producers that push it hard are also the dance electronic ones that can, but also the type that use tools like ozone. Recently with the lufs levels automatically set to -14, i think that gradually the overall loudness wars will be shaved off a bit. I throw mine at -10 though, but the preset is -14 for the click one button mastering assistant. Is good news for loudness wars.

[@KodiaxeMusic]

If your neighbors aren’t calling the police it isn’t loud enough.

[@phutran2006]

Hi what DAW software are you using? Thanks

[@zeSpammmmmer]

i've been producing music for 25 years or so now, and you're one of the (very) few i have come across with, who mention what i consider the most important key: being creative and in the right set of mind, when post producing or mastering. thanks for highlighting that up. great video, well detailed and explained.

[@inthemix]

Thanks for the kind words. It really is so important and it's something I totally missed out for a year or two, I was just doing the motions. It's vital to be really into the project :)

[@zeSpammmmmer]

absolutely! mastering could be just as thrilling as composing, and in some ways, even more rewarding. again, really good video you did there, thumb'd up and sub'd.

[@MrFree-vj8qj]

So you have to be creative?? Who knew, its hard to explain people being awe when generic stuff is thrown at them

[@ELLIOT8209]

@@inthemix I was hoping you'd elaborate on the dynamic range and which ballpark number is good

[@HOLLASOUNDS]

@@ELLIOT8209 That's more to do with the mix and making sure sounds don't clash.

[@krishnachoudhari.youtube]

It's astounding that someone is willing to share their knowledge and technique, and be so thorough with it, for free. Thankyou good sir.

[@evilgirl2006]

2M views on a 22 mins video, that's more money than paid lessons.

[@Tjejify]

I really enjoy how organic and sincere your videos are. I always learn alot!

[@xanderneal6856]

I guess hazy made you salty XD

[@Tjejify]

@@xanderneal6856 Bitch I fucking love hazy😏

[@SoulPapiii]

🙏🙏🙏🙏

[@ConReising]

This is seriously the best mastering tutorial on KZbin.

[@LouisTursi]

“I mean no disrespect to professional mastering engineers...” You mean to tell me there’s people better at this stuff than this guy?

[@bigxrecords7375]

Yeah believe it or not there is

[@kurogotbeats]

yes it’s called people who took years in college and had been doing this for many years

[@aabc]

obviously this guy just showed 4 basic steps eq comp limiting lol real mastering chains are much bigger and better containing multiband compression/dynamic eq to stereo adjustments .. this video just covers the surface

[@LouisTursi]

@@aabc Well yeah, but that’s the idea. This guy may only be covering the surface, but goes into so much detail that he does a really good job of making himself look like a professional. He may not actually be one, but he certainly knows what he’s doing.

[@aabc]

@@LouisTursi umm sorry to say ur wrong u will realise this after some time when u gain some experience that he doesnt really go into much detail .. but yeah he definetly does a good job of explaining it simply to begineers

[@myliebiii]

"nobody hear if you used compressor or not, so you must just like what you hear.." gold

[@RAF700]

Never learned so much in just one video, you've got my respect. Very good presentation along with your coherent explanation of everything.

[@stevejobs7766]

I got confidence..... You are a person who helps people honestly...... Thank you Mike.... Brad get well soon......

[@balintglovacs4696]

Perfect timing, I'm about to finally master my track

[@inthemix]

Bálint Glovács Good Luck :)

[@raushankumarh3603]

Bálint Glovács ji

[@bhaiagrlefthendmyhotoxkane163]

Sir I. M from Pakistan please u make my song master I. M singer Punjabi commercial sikh style

[@sickduck6921]

Eyy send me a link

[@idlecaption]

I love how you explained every single adjustment you made. A lot of channels either gloss over specifics or spew out all these different numbers they like to use on compressors, EQ, etc. on certain plugins which isn’t helpful as every song is gonna be different. Thanks for this!

[@slurpeexyza17]

It's actually really insane how much I've learned from you in terms of production! THANK YOU!

[@DrVilest]

This is the bestest tutorial about mastering I ever seen on KZbin...🙌

[@crossonsight]

the best is the superlative bro, no need to the best(est) anymore

[@DrVilest]

FadelYulisP okay bro🤘

[@user-wq5kv2hu2s]

bestest....are you 9 yrs old

[@elitesoldier8340]

JESTR BEATS yea, cancel that bitch!🤣

[@AllTheRightMoves]

agreed! I've been watching videos for years, and never has someone mentioned LUFS vs RMS or peak loudness. Or that streaming sites use -14 average LUFS on default. I always wondered why my some of my audio would get artifacts when posted on streaming sites, and equalizing the loudness before comparing edits is a HUGE way to avoid over-limiting your master. Great work dude!

[@Manoj0501541]

I've been watching your videos for like an year and they have helped me through everything, well mostly everything. Trust me, you are doing a great job.

[@inthemix]

Tushaar Malik Thank you very much :)

[@titrecords2294]

Man you’re like a music production professor 🙏🏼🙏🏼🙏🏼🙏🏼 I love your videos

[@DJSalera]

New to all of this myself - this is the first moment I feel like I've understood mastering at all despite watching a lot of content on the subject. Thank you!

[@jimmyroyal34]

You are the best teacher I have ever had. This mastering video is by far the clearest and most enjoyable to watch. Those 20 minutes of video took me to a better level compared to the many other boring and much longer videos I have seen before. You don't just speak technical jargon but you speak to us as humanly as possible, reminding us that mastering is a musical creation process in the same way as the mixing process. Thank you very much for being the person you are and surely like many others, I have a deep admiration for your work. My subscription to your channel was instantaneous and I will pay special attention to all your previous and future videos. Long live to your channel and especially you.

[@cwcpants140]

SP-AN SPectrum ANalyzer I cracked the code boys, let's pack up and go home. Mission complete.

[@keinstress3647]

King

[@emojiwastaken]

underated comment

[@elchikoriko592]

In Ableton it's called "Spectrum" - how boring.

[@urphakeandgey6308]

Lol, I was wondering this the other day when it clicked.

[@vuks-fj7fl]

No more mastering required, we cracked the code.

[@jandospace]

Thank you for clarifying this. I've always wondered what kind of dark magic happens during the mastering process because people are always saying that you shouldn't master your own music :)

[@szla.]

Soooo useful!!! I’ve watched other videos about mastering but this is the first one I feel I really understood what is about. Not just instructions like “do this” “Eq here” “compress there” but the logic and reason of every step, which is the key for doing it well. Thank you again

[@llGemini19]

The absolute BEST advice is the trust your ears and don't overthink yourself! I struggle with this a lot but I've learned to deal with it. Every time I try to master a song, I end up having to remaster it because I overthink my decisions and then later on, on a different day, I listen back and I don't like what I hear. Just trust yourself and your ear and don't overthink it!

[@Antweezy]

you are the best channel that goes in depth about what making music is all about. Thank you!

[@inthemix]

Antweezy You are more than welcome, thanks for watching :)

[@mrvoodoo5498]

The best, easiest to follow and understand tutorials for FL Studio I've ever seen on YT. I find other channels tutorials a bit annoying and hard to follow but this guy paces it well and has helped me a lot. Thanks!

[@baselinesweb]

As somebody already said, the end comparison was the most important part of this video especially for someone who is further along than a beginner. Good job.

[@adamdenby]

Been mastering for a longtime and that was some of the best advice I've heard. Subscribed!

[@jefethlopez6151]

I really appreciate how much work you put into your videos. Can't thank you enough.

[@SjN7HETIK]

Friend, as an audio expert I have to say this is the best clarifying and explicative mastering concept video of all the internet. Your speaking is straight to the point, only super useful technical pearls, the way you think and then explain is the best to get people fully understand. And I totally agree with you, all the things you spoke about are actually the most important when setting and mastering. THANX FOR YOUR TIME, I'm sure this tutorial will concretely help thousands. All the best, J.S.

[@gkillmaster]

You've managed to synthesize years of experience and knowledge into a very concise and clear tutorial and I am the beneficiary and I completely appreciate that so much. Thank you!

[@sandwich-breath]

Great introduction to mastering! Your A/B comparison between the mixes really shows the benefit of backing the volume off when mixing, especially when listening for the impact of the snare and kick.

[@duba6783]

Amazing tutorial, felt like a real lesson from a good teacher. You explain so great and your aproach is great. Thank you! I learnd somthing today.

[@woodyoulove-reynaldguibone6890]

437K subs is injustice with this video production. It's detailed and professional. He really knows what he is talking and what to do next, step by step. I have watched your videos and really helps me a lot. Thank you so much!

[@Chris-zs6fd]

Thank you so much for this video, you enable so many musicians to stand on a similar footing to more established artists - it really is a tremendously valuable contribution :)

[@StratsRUs]

1 year on and still a great comment.

[@wolvyskoll]

your voice is suspiciously soothing

[@ironik4400]

Youre an FL god. This channel is like a 1000$ lesson set for free. But please forget I said that because I want to continue to learn ;P But seriously.. Thank you so much for all your advice and teachings! Youve made me go from a noob to at LEAST a higher tier intermediate producer. Obviously (only been about a year) but I have a lot more ear training to do, but I feel because of you and Simon Servida, Ive got all the dynamics of production from start to finish covered. So again, thank you for all your hard work! Youre most appreciated! Much love!

[@drummerjstone]

I'm sure he makes PLENTY from these videos lol

[@namede6210]

Great video for a beginner like me who has just started to make covers on youtube. I wasn't even looking for any crazy mixing or mastering tips, what I needed was just a way to figure out how loud should my covers sound like, and I think I've gained much more than what I was looking for from this video. Will definitely play with the Youlean and Ozone stuff. Thanks mate.

[@bangladesh6027]

This video was my introduction to your channel and it's made a very good impression. Very well thought out with clear and concise explanations and examples. Very well done.

[@deltanebula8622]

Might you consider doing a series on critiquing/giving feedback on people's mixes or masters on their original songs? I feel like I've improved my mixing significantly since I started watching your videos, but I'm not sure my song is quite ready for mastering.

[@inthemix]

Delta Nebula So many people have asked for this that I think I'll have to start this somehow. Many on KZbin live or something

[@thedevilsadvocate5210]

You can call it "My Mix is Better than Yours"

[@shubu42069]

best mastering tutorial ive ever seen. thanks so much for a great vid

[@djjunebugg2148]

Great tutorial, you have one of the most likable instructional channels I've come across. You're easy to follow and you have fantastic pace! Keep up the fantastic work! Salute Bugg

[@Block_Miners]

These five steps are exactly what I was looking for, I spent about a year searching for an answer now I got it! Thank you

[@0374studio]

Very well explained. Congrats!

[@ijimedia]

absolutely brilliant!

[@canceroushit5933]

Came straight from the sound design video and I must say this channel is the one thing that actually taught me what all of this is and how to use it appropriately.

[@KapaDeFreitas]

Man, I am really impressed with how much you know about this stuff, but especially how grounded and wise you sound, seeing that you look way to young for that! Kudos! Keep up the brilliant work and thanks for sharing all this knowledge!

[@zenith_journey]

such a quality channel mike, keep it up man

[@SteveLionProducer]

Wow my man you explain in such detail is super easy to understand, I'm supporting you and btw do you have a guide that would take you from A to Z in mixing and mastering?

[@giacomorossetti2608]

Bro this vid just opened my eyes, im planning to produce and make songs but i don't have a good master knolwdge, this video opened my eyes and explaned what mastering is. Conitnue doing these vids ur the best

[@SeriousGear]

This series has the best advice, especially when it comes to mastering. Great stuff!

[@Tempestspy]

Thank you for the details. I'm trying to learn how to record on my own. This video really help me

[@chenugent]

This man’s voice is eargasmic

[@kin9255]

I've learned so much from you, honestly, in my opinion you are the best producer on youtube, the amount of knowledge you have is extraordinary. Well done!

[@scandalmusicuk]

Wow, thank you for your superb tutorial. I am seriously considering mastering my songs for a new album, on my own for the first time, and in short, I'm bricking it! Your video has definitely helped a lot. Your explanations are so clear, to the point, and yet, in-depth. Thanks again

[@tonyrosamusic]

Thanks for this amazing guide bro. It helped me a lot.

[@bobbylucas8334]

This was super helpful and well explained, plus exactly what I need right now - Thank you!

[@inthemix]

Bobby Bey No worries Bobby :)

[@bernieschmidt]

Thank you for your generosity in sharing what you've learned.

[@boxie13]

I was just asking myself where to take my loop and randomly picked this video....talk about accidentally turning to the right page in the text book. I appreciate what you do so much!

[@PrimaudiaRecord]

This is brilliant mate, exactly what I needed to know about. I'm away to get busy with loudness and compression :)

[@justinmcchristion7132]

This popped up for me right when I was getting ready to master my new song. Definitely got a sub from me man

[@godofspacetime333]

Amazing video, I learned a good bit. Especially that part about the LUFS values and optimizing for uploading to streaming services. I had no idea. They’ve finally ended the Loudness War!

[@DutchLessonsByThomas]

wow that was incredibly comprehensive and honest. Thank you very much, this is very useful for a beginner who is very critical on his music, but doesn't know where to start.

[@m.a.sbeats6085]

this guy is amazing.

[@malyhuncut]

I'm just starting witf FL Studio and I didn't get many of things u mentioned. But still I can see that your videos are simply, clear and they catch the point. Keep up the great work💪💪

[@JaniceMarieSingleton]

Thank you so much. This is something that I really needed to know. Peace, and Blessings to you and your loved ones.

[@Red-mq2no]

Your tutorials are a goldmine. Everything is super concise and helpful. Thanks +subscribed!

[@inthemix]

Thank you so much. I really appreciate the support

[@zoksa3890]

This video has helped me soooo much. I've always struggled in mastering my beats. After watching this video, I downloaded the free plugins and already see a huge difference in my mastering process! Not to mention all the useful tips you gave in this video, thanks man!

[@inthemix]

zok sa Wow that's so great to hear! I wish you the best luck with your music and mastering :)

[@developingmind3739]

Thank you very much for this channel. It helps me alot taking my first steps!

[@mohammadalif3650]

SUPERBLY DETAILED. Explanations were not rushed and you managed to simplify this for dummies like me :)

[@benmcinnes8561]

Great video mike You inspired me to make music

[@jaypanthem2282]

Thanks Mike! 🙇‍♂️🙏

[@lara-lg4by]

No problem 😂☺

[@LucasEvergreen]

About a year or two late, but I just found your video and I gotta say it's been incredibly helpful. I couldn't figure out why my tracks sounded great in my headphones but not on my phone's speaker, and balancing the volume really made a difference. Quality video, straight to the point, I'd give you a cookie if I had one.

[@lukeplays1019]

Amazing video. I´d never realised how important the mastering process was. Thanks for another great video

[@markesch9243]

I do Metal-Music. These steps are so versatile, that i think you can use those techniques on any genre. It really helped me a lot finding my mix and master. Thank you very much for breaking it down for us mere humans.

[@enkeegch]

I watched the full ad cuz u deserve it. Thanks to your quality content I’ve learned sooooo sooo much and it saved me so much time ❤️

[@alex_romane_]

Absolutely brilliant tutorial man! I use Reason 9 so frequency filter/cut-offs etc are done in the mix [per channel] pre-mastering but it's the same result. I Love your techniques, explanation, & principals and above all; I LOVE so much that you encourage people to play/experiment so as to learn. Really good video and so well presented too. All the best!

[@dallaswalkeriii1339]

I love your teaching by the way, and I've finally decided to make you one of my top sources for information going forward! Thank You!

[@MicroDotTV]

exactly Michael- that is what most artists do today, they have professionals take care of that :)

[@wvlf626]

Me listening to my song: Jesus this sounds aweful. Him: Be happy with your Mix. :V

[@ordinarycitizenn]

😂😂

[@okkedorrestijn1714]

Lmao ikr

[@JohnPaulBuce]

me all the time, but nvm ill just release it

[@seanknox8962]

Be happy with yo mic Lol

[@benmarino1913]

Thank You for making a very complex process straight forward and easy to digest. You are a great teacher. Much appreciate In The Mix!

[@hypany]

for those who aspire to be an artist, I'm genuinely wishing you luck on every step of the way. keep on that grind cause I'm hoping you make it, and who knows, we might meet one day because I aspire to be one of the best to.

[@VampAngel1111]

WOW, you are a freakin’ genius (and you explain things EXTREMELY Well)! I started with your muddy mix/fix video and then moved on to this one. I am a songwriter with a computer full of great tools (not someone who is an engineer and knows how to use them). Thank you so much for sharing your knowledge! Because of you my song has gone from COMPLETELY LAME to maybe something worthy of listening to! I fixed my mix (with Izotope TBC, thanks for that too, I didn’t even know that it existed). I will also tinker and master it myself (based on this info). However, I do have an EXCELLENT person to master it for me (who has won four Grammys for her work). So, now when I send her this mix (thanks to you) I won’t be sending her a pile of poop this time! THANK YOU, THANK YOU, THANK YOU!!! 😁😁😁👍👍👍

[@chamodwijenayake2832]

Amazing man

[@GrizDrummer25]

This just helped me sweeten the final mix for my drum covers. Thanks! Fantastic instruction!

[@maria_remedios]

This might be the best, most comprehensive video I've watched on this topic.

[@arnaudvanassche8242]

Yesss! Just when I finished my new remix! 🔥

[@swstkmusicx909]

same here brother...Just completed a new remix!

[@cosmo5179]

Same here! I'm remixing my album of 2006 ;)

[@GiuseppeCasey]

Dude you should be a lecturer at a top music school you're so easy to listen to and understand

[@TheChicoBloxer]

tf we have the same full name

[@GiuseppeCasey]

We should make a club

[@TheChicoBloxer]

@@GiuseppeCasey We should.

[@yuvs0]

Amazing video with a brilliant level of depth! Good examples backed by secure explanation. Instantly subscribed - keep up the good work, mate!

[@davidcollins59]

Brilliant vid, so well explained. My mastering is slowly getting better. Thanks :)

[@maxstone4823]

Nice video man! I make music of the Future House genre and you helped me out a lot. Thank you man :)

[@princeskyes781]

Nice This Is Helpful👌

[@milovmladenov]

I love the way you explain things so precisely but also in a very very practical way, thank you

[@kamalakbar5439]

Thank you Chris. I really appreciate it and that was exactly what I was trying to do. No fuss and helping people get on with what they need

[@KevinHues]

That small ass glass of water on the desk in the beginning is killing me 😂😂😂 I don’t know why

[@inthemix]

KevinKBeats while editing that was annoying me too. Like I was waiting for it to tip over

[@sanmatmify]

Kevin Hues my biggest pet peeve 😭

[@stiptreezy8481]

lmfao, I didn't even see that til after reading this comment, shit had me weak. xD

[@GrauFPV]

Hell I have beer cans all over the studio....

[@nolanneal]

All I saw was “ass glass” lol

[@MIO9_sh]

_when you can afford all those plugins_

[@bruhology6437]

I sure can't I cant even afford steam games lol

[@RMMusicStudioSimranbrar]

no need to buy them get a cracked version better. 😁

[@tobibecker5723]

In corona times there are a lot of sales for them

[@1eeliaas911]

Cracks

[@Covers-and-Commentary]

2 are free

[@Hidenblade228]

I love tutorials like this! Great job man, thanks a lot, thumbs up

[@richardtremblay7634]

I’ve seen many mastering videos which were all pretty good but your explanations really made everything click. Thanks from USA 🇺🇸

[@timwedgewood5496]

Firstly, a big thank you for all of these videos Mike, your explanations and simple quality of everything you put out has been a huge help! Secondly, and this goes to either you or anyone else out there, I'm looking at the Arturia Keylab keyboard you have there and I'm contemplating getting the MKII when it's released soon but I've heard so many negative things about Arturias products. I was just curious how your experience has been? Have there been any issues/regrets with the purchase or do you think I should feel pretty safe investing in one? A bit off topic but I saw them in this video and thought I'd ask but again, terrific work, thanks!

[@inthemix]

Tim Wedgewood Hi, thank you very much. The only issue I've had is getting one of the preset scroll wheels to work which Isn't really a problem for me and the price point. I feel that they are slightly overpriced for what they are but they do look very clean and elegant. I feel that each product should be about 10-20% cheaper

[@timwedgewood5496]

I hadn't heard of that problem but I will keep that in mind and hopefully it's been ironed out in the second iteration, thank you! :)

[@DionSidney]

You look a lot like Nicky Romero :) also a great producer/DJ

[@wilsonmpesha904]

Kickstart! 👌🏾

[@MuchasDistracciones]

they have the exact same face lmao

[@beardedpike3881]

i think he looks like a mix of nicky romero and fischer from inception

[@beardedpike3881]

@The Shitstorm Starter why does the gender matter lmao

[@jamesquinn8958]

These videos are very helpful. Thank you for taking the time to make these vids to help us fellow musicians. Much love!

[@Keroser1983]

All the knowloedge and showing respect to the engineers in the beginning of the video. Hats of to you my friend. Thank you very much for these wonderful videos.