Have I helped you? Help ME continue this channel with some support: TIP: Click the "THANKS" button Become a KZbin Member, by clicking "JOIN" Support my Patreon: patreon.com/3drundown Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Bambu Lab: shrsl.com/46lky Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9 Support me via my Course: 3DRUNDOWN.COM
@timonmeijer4 ай бұрын
PLS HELP ME WERE CAN I FIND THE RAFT OPTION
@3DRundown3 ай бұрын
Here: kzbin.info/www/bejne/mWKQmIKul9qikJo
@haywardstrydom14682 ай бұрын
PLS HELP ME I CANT FIND MY PRINTER ON THIS NEW VESION. WHY???
@haywardstrydom14682 ай бұрын
I'VE GOT A CR 6 MAX?
@Nyx_UA2 ай бұрын
Thank you. i couldnt find where to expert to local. thanks :)
@msreave2 ай бұрын
Thank you so much! Very informative!
@3DRundown2 ай бұрын
Very welcome friend. Catch the follow up video "Creality Print 5 Tutorial"
@K2teknik.2 ай бұрын
I got a strange issue, I try to follow what the video says, at about 14:26 dragging the dog stl file, it sort of work, but I only see a silhouette of the footprint of the dog, the green 3D figure is not there, when slicing there is shown some drawings sort of incomprehensible doodles.
@3DRundown2 ай бұрын
That's super odd. Link me to a pic/video of it? Are you on V 5.1? Try importing, instead of drag
@K2teknik.2 ай бұрын
@@3DRundown I was digging into it a bit deeper, it turns out that my build in graphic card, with the current drivers, do not support OpenGL that well, so the 3D figure is drawn by OpenGL and the rest is drawn in an other way. Creality Print 4,38 do give a warning about this in some way during startup, Creality Print 5.1 do not.
@Eagle6215 ай бұрын
I do not see a download foe Mac OS… Help please🤷🙏
@3DRundown5 ай бұрын
It's not there.
@Eagle6215 ай бұрын
@@3DRundown thank you… I am a su so if you run across the 5.0 for Mac OS, I would appreciate a heads up. Keep up the great work (it goes well with the hat…😊)…
@3DRundown5 ай бұрын
All power to the Hat!
@xxxxzorroxxxx5 ай бұрын
It’s not available for the Apple I tried looking for it.
@geoffclayton154Ай бұрын
can you do a video on filament change say from pla to petg please?
@3DRundownАй бұрын
Sure. Can you elaborate on what exactly your looking for me to cover on that?
@mynameisprivate1583 ай бұрын
That is Chinese not Japanese...OOF
@3DRundown3 ай бұрын
No Shit.
@BamaDad2 ай бұрын
FYI I am not sure if this issue has arisen with others. I have it installed on a Windows 11 PC with all of it's glorious but smoewhat hindering security assets. I had a recurring issue where the software would not allow slicing of models due to a permissions issue using the working directory "C:\Users\Your-Username\AppData\Roaming\Creality\Creative3D\5.0\GCodes" This would result in a falure and deliver a notice on screen that the software was unable to open the file. After spending a long time with support to no avail. I figured out a workaround. Notice this is at your own discretion if you decide to go my route: navigate to the Creality directory the right click on it and go to "more options, Then go to Properties. Choose the security tab, and give "System" full access" to the directory" this will allow the file to open and function seemlessly and your slicing will no longer be hindered.
@3DRundown2 ай бұрын
I have not seen this on any version. Something unique happening there. Are you on 5.1
@BamaDad2 ай бұрын
@@3DRundown I am. Support didn't even offer any assistance. THey just wanted me to R&R V:5.1. And when that failed they wanted me to go back to a 4.? version. I am a Network Engineer with way too many years of experience to go that route. I knew there was a reason the application was being denied access to the working directory. I could have re-routed the working directory from the root directory to a more security lax location but at the time couldn't find where to do it in the software. I may do that now as I don't like giving software system level access to a root directory.
@BamaDad2 ай бұрын
Just an FYI Moving the working directory form the c:\users\user\AppData\Roaming to a more user freindly directory also works.
@3DRundown2 ай бұрын
Super. Yea, Creality mean well, but, sometime you don't get the kind of technical answer you want. Often, I end up reaching out to them, to assist with situations like this. I'm gonna have a look at this. So far I have not heard of this issue from anyone else, but having the fix, is great, and something I may go ahead and cover. Thanks for taking the time to explain. That said, DO NOT GO BACK TO 4. KILL IT WITH FIRE. lol
@robertbobbitt84485 ай бұрын
I tried it But the click spots are off by a quarter inch on my display making it a PITA to use Tried changing resolution frame rate nothing Guess ill wait for the version with the repaired graphics
@3DRundown5 ай бұрын
??
@Den-ml7zg5 ай бұрын
Same issue here, also had issue with previous version
@lancevasquez74274 ай бұрын
I have the same problem. Contacted Creality yesterday with screenshots. They acknowledged the problem and are working on 5.0.3. Hope this works
@jimcatrell55244 ай бұрын
Having the same issue is definitely a big let down
@a8te20205 ай бұрын
Thanks for the video! very helpful. Hope you will prepare more in-depth creality print 5.0 tutorials
@3DRundown5 ай бұрын
Depends on how this video performs, and, it's looking good. I will have to delay several other plans, to do this, but, I may...
@MsLostboysforever5 ай бұрын
Thank you for your tip. Are you going to do a video on first layer colour change in creality print 5, I think that would be a good topic, I am using orca slicer for that feature, but would love to try it in creality print?
@corlissmedia2.02 ай бұрын
I've downloaded and installed all three new versions of their slicer. In each case, the program locks up right after I choose the printers. And that's the end of that. My guess is my internet provider is blocking this new slicer because it's loaded with spyware.
@3DRundown2 ай бұрын
What 3 versions? You should be on Creality Print 5.1. I have not heard of this issue from anyone else. There is no Spyware on Creality Print.
@corlissmedia2.02 ай бұрын
@@3DRundown Creality has posted 3 versions of the 5.0 slicer over the last approximately six weeks.
@3DRundown2 ай бұрын
All Version 5, but, they continue to update it. The most current is 5.1. Bambu, Orca, Cura, and all major slicers are regularly updating. My point stands, there is no spyware on Creality print, and your issue is not typical. There is a common cause, somewhere with your setup.
@corlissmedia2.02 ай бұрын
@@3DRundown even the newest 5.1 version posted on July 15 doesn't work. The top of the control window is almost 15mm ABOVE the graphical interface. They don't know what they're doing, and releasing super-buggy software over and over again shows they don't give a rat's behind about users.
@3DRundown10 күн бұрын
You are having a video driver issue. Perhaps your graphics card doesn't support Open GL well enough. As for this "They don't give a rats ass" nonsense. You literally know nothing about the people at Creality.
@ohtonindustries9955Ай бұрын
I was able to make progress with this video and now I can print, perfect video for getting started with creality print.
@3DRundownАй бұрын
Awesome. Learning the slicer is everything. Happy to get you started 👍🏼👍🏼
@liv4drt7 күн бұрын
Just got my K1 SE today and your video was very helpful, thank you!
@3DRundown7 күн бұрын
Let's learn more together: Tutorial: kzbin.info/www/bejne/d5WwZJqEmt92fc0
@BradRemillard5 ай бұрын
Well done. Many thanks. Look forward to more videos.
@flyboypr5 ай бұрын
No Ender 3 V3 Se option yet. I tried the KE option but some of the temps are off. Like the bed to is set to 50c.
@3DRundown5 ай бұрын
They are probably all set to 50. Pop it up to 60
@3D_Printing5 ай бұрын
Ready for their colour, 350 x 350 x 350, enclosed, fast K2 which will be out in June or July
@3DRundown5 ай бұрын
The K2 looks insane!! It's the size of a 5+. This is game changing
Ай бұрын
Is disappointing from creality, I have an Ender 3 S1 Pro, and rceality print 5.0 don't have this printer profile or a way to configure it, i so ridicoulos that for sure my next printer is not going to be a Creality one, they don't care for they users
@3DRundownАй бұрын
No company cares more about their user than Creality. They are the most community interactive 3D company by MILES. Nobody even comes close. Also, S1 PRO is ancient. Mine sits on the floor in my garage. However.... Creality Print 5, DOES have an S1 Pro Profile.
@InfectedshmoopАй бұрын
is the classic ender 3 not supported anymore because i downloaded the software and it doesnt come up as an available printer?
@3DRundownАй бұрын
It is not on CP5. Only newer machine so far, but, I do believe they plan to continue expanding profiles. However, making a profile for the E3 shouldn't be very hard
@skunkworks963516 күн бұрын
Mine does not show all those filaments when I drop down . Been trying couple days to find silk pla . Nothing there
@3DRundown16 күн бұрын
Use regular pla profile for silk. I use silk EVERY DAY, and make no changes for it.
@ohtonindustries9955Ай бұрын
everything related to creality print 5.1 and my k1c are in mm, anyway to change everything to inches(imperial)?
@3DRundownАй бұрын
Yes, but, MM is pretty much how the entire industry works. It would be worth your time to get used to that
@aldecoafotografia98773 ай бұрын
Can you mke a video just explaining supports? am having trouble with custom supports and i cant find a way of making them work with verion 5 and k1 max
@3DRundown3 ай бұрын
Hi. I have a CP5 tutorial here, that touches on Supports. Find that, and give it a watch. I will also try to make some more videos on it
@davidwatkin14845 ай бұрын
👽👽👽👽👽👽👽👽👽👽👽 Thanks for sharing your knowledge.
@billwiththeb2 ай бұрын
How do I get my model to slice??it keeps saying lan printing is my only option to click on..any help would be great thanks..
Really? Is that where my friends from Creality, come from, when they visit me? I had no idea.... Thanks for clearing that up
@ZombieObsidian3 ай бұрын
Just installed creality print v5 for my new printer but its not setting the print temps or cleaning the nozzle before printing. This is frustrating
@3DRundown3 ай бұрын
Perhaps this video will be helpful: kzbin.info/www/bejne/mWKQmIKul9qikJo
@caseyreames2 ай бұрын
I followed the tutorial. I only have the E3V3. I set up Creality Print for the E3V3, but when I try to print, it gives the warning it’s not for my printer. Only the phone app works for me.
@3DRundown2 ай бұрын
Ignore the error. If you know it's ok, then it's OK
@caseyreames2 ай бұрын
Thank you. I ran it anyway and you are correct, it worked fine. I appreciate your videos. Thanks again.
@peterstoltz32964 ай бұрын
Can anyone help me out with my ender3 v3 se stock settings
@3DRundown4 ай бұрын
I have a profile on my Patreon, and here in the Members feed. I know that sounds petty, but, I gotta do what I gotta do, to keep my lights on, and this channel afloat
@albrody88614 ай бұрын
Great video. Looking forward to learning more about Creality Print 5.0
@3DRundown4 ай бұрын
Pop into this one! kzbin.info/www/bejne/mWKQmIKul9qikJo
@albrody88614 ай бұрын
@@3DRundown Looks good, thanks!
@davidfields11963 ай бұрын
I'm a bit disappointed with it so far, it's not quite as user-friendly to me. Heck, somehow they screwed up the file naming format when you export your gcode, now it shortens the file name making your files unidentifiable on older printers.
@davidfields11963 ай бұрын
It got worse, I just tried to print a 6.5 hour print, the timer on the printer was estimating 30 hours. And with that goes the last bit of trust I had in 5, I have now switched back to 4.3.5.6984, even with it's occasional crashes it can at least do it's job simply and consistently. Maybe I'll try 5 again in several months after they update it a few more times. ☹
@3DRundown3 ай бұрын
Start here (and get 5.0.3) Creality Print 5.0 Slicer Tutorial: Support Painting, Mouse Ear, Infill, Walls, Temp, Speed, more. kzbin.info/www/bejne/mWKQmIKul9qikJo
@3DJapan4 ай бұрын
Great video. I don't see the point in printing from Creality Cloud personally. I just send it over LAN to the printer.
@3DRundown4 ай бұрын
Creality Cloud will store all your file in your cloud account. You can then reprint at any time to any compatible printer. It will create a time-lapse. You can remotely control, monitor the printer and camera feed. All through the App & the Website. It's very nice once you get settled into it's work flow
@martslittlediyshop86705 ай бұрын
Thank you for this tutorial. But the funny thing is that I can't find bed adhesion like skirt, brim, lace and raft. I also cannot find the infill patterns as in version 4.3.38
@3DRundown5 ай бұрын
I'll try to cover more on Creality Print, in the Coming days. These videos take allot longer than it may seam, to make. I'll do my best to do more tutorials. Consider being a member. :)
@martslittlediyshop86705 ай бұрын
@@3DRundown Thank you in advance for this, in the meantime I will of course also look into the options myself. When you use the search option you will only find brim.
@3DRundown4 ай бұрын
Catch my new video. I covered that for you. :)
@gratefulamateur139317 күн бұрын
Very helpful. Nice job.
@3DRundown17 күн бұрын
Catch my full tutorial also
@AceTheIdot3 ай бұрын
i have a cr-10 s how what printer do i put?
@3DRundown3 ай бұрын
I have a 10 S. I'll have to check it out, but, I'd look to set it up like a CR10-V2, with the ABL line in the GCODE.
@AaronBielik2 ай бұрын
In my Manage Filaments page it only lists the Generic filaments not any of the Creality filaments. Is there a way to see all of the filaments including the Creality ones? I am using MacOS if that changes anything.
@3DRundown2 ай бұрын
I'm not familiar with the Mac version, but I do think it's a little different. We just got a new windows version yesterday. Maybe a Mac update also? Check Github and Creality Cloud
@AaronBielik2 ай бұрын
@@3DRundown What would I check Github and Creality Cloud for? I just got the newest version of Creality Cloud from the Creality website today. Also I have an Ender 3 V3 SE if that changes some settings.
@3DRundown2 ай бұрын
Because that is where the latest version usually is, and, if there is a beta, that's where it would be. But, you do you.
@TT-KAT5 ай бұрын
after setting my nozzle to hardened steel for the 3v3 and saving renaming it i tried to do the same for my k1c but when saved it reverts back to nozzle not unknown
@st0rr1e4 ай бұрын
creality 5 just does not work with my ender 3 v3 se any ideas? I saw you posted a setup video for that but it has been removed? Is cp5 just not compatible yet?
@3DRundown4 ай бұрын
There was a mistake in the video. I moved it to the members feed (and may have even deleted it from there). However, my SE profile, is available to all Members and Patreons. All you'd need to do, is import it. Also, I am told the newest CP5 update, added an official SE profile
@st0rr1e4 ай бұрын
@3DRundown awesome thanks I'll have a look I just uninstall and stayed with the older version as it's working ahah
@3DRundown4 ай бұрын
I would 1000% escape V4 for V5.
@edwinov4 ай бұрын
I'm having the same problem. Installed the very latest v5 from github and NO support for V3 SE. ;-(
@st0rr1e3 ай бұрын
@@3DRundown just cant get v5 to work it errors every time i try print :(
@johnsmith44024 ай бұрын
For now, it is very slow, crashed sometimes and not supporting older printers. Not good for everyone!!
@3DRundown4 ай бұрын
Klipper machines so far. Make any profile you'd like. Not running slow here, and No crashes for me.... yet. Time will tell
@johnsmith44024 ай бұрын
@@3DRundown I have CR-10 SE, which is Klipper, but I don't see its profile in CP 5.0.
@3DRundown4 ай бұрын
It's not yet. I hope to make a profile soon
@GenX3DprintsАй бұрын
Hello, I almost exclusively use Creality print for my ender 3 v3 k3 and se printers. I am still a newbie with a lot to learn. I noticed in Creality print that there is only one configuration for the ke, while the se has 3 of them called standard, optimal and fine but the ke only has standard. is there a way to add the additional configurations for my ke?
@3DRundownАй бұрын
This is correct. Why? I have no idea. Tell you something.... I am a full time 3D Printer MAKER (And Teacher), and 99% of everything I make is in 0.2. However, I have no clue why this is the case. I think maybe I'll work on a profile for the KE to add those. I'll try to get that done. However, you could, in theory, just match up the SE settings for the KE, to change to 0.16 or 0.12. The printers are very similar.
@GenX3DprintsАй бұрын
@@3DRundown I know you probably already have a hundred and one things to do as it is, but it would be helpful to have profiles made by someone that knows what they are doing. :)) in the meantime, i think i will try to copy the configs between the two profiles to see how that works for me. Thanks for the helpful content, look forward to your next upload!
@3DRundownАй бұрын
My Backlog of TO-DO list, is so overwhelming, some days I can't function.... But, I promise I will try. And if I don't. I promise it's not because I DIDN'T WANT TO. Do me a favor though... If I get it done, be a member. Even if just for 2 seconds. It helps allot, and that's where I post files. I can't do it publicly. It's too much exposure. :)
@GenX3DprintsАй бұрын
@@3DRundown I'll look into that this payday. I appreciate what you do, and don't mind supporting if I can
@SilverbackSasquatch19xx4 ай бұрын
why wont this software open full screen on my computer
@3DRundown4 ай бұрын
Dunno. Latest version? (5.0.2)? Working ok over here
@lancevasquez74274 ай бұрын
I have the same problem. Contacted Creality yesterday with screenshots. They acknowledged the problem and are working on 5.0.3. Hope this works
@xxxxzorroxxxx5 ай бұрын
Thank you this is great. This will help me retraction having trouble.
@RCstagram2 ай бұрын
Thanks for the nice video. Can you let me know where can I find the "initial bottom layer"? Version5 doesn't have it while version 4 has.
@3DRundown2 ай бұрын
Looking for 1st layer speed?
@petersmet68604 ай бұрын
Very interesting video, I hope you will make more about using version 5.0. I can't find the Enable Gcode Offset (Z) button in the new slicer V5.0. The Gcode Offset (Z) is fixed at -0.05mm in the Experimental tab in version 4.0. Can you help me?
@3DRundown4 ай бұрын
Download 5.0.3 and check out my "Creality Print 5.0 Tutorial", for starts
@absorbtheride5 ай бұрын
This isn't working for me. When I select the K1C printer and go through all the settings, when I exit and reload the software it's forgotten the K1C and asks me to install Ender printer. I don't have an ender. This is garbage. Off to Orca.
@3DRundown5 ай бұрын
This morning, all my K1 Models, are gone, and not available to add back. The only one that stayed, is the new profile, I made during this video. Looks like, some bugs need to be addressed.
@ravb.77005 ай бұрын
@@3DRundown Yup, same happened to me also. My K1C profile vanished and cannot add it back. But all the Chinese lettering has gone, so that is one good thing I guess.
@3DRundown5 ай бұрын
Yep. That is my exact scenario. The Chinese is gone, but, so is the K1 lineup. I am not sure what's going on, but, gonna need a solution, pronto. Fortunately, I modified my K1, for the Video, and, that profile stayed
@ravb.77005 ай бұрын
@@3DRundown I ended up reverting to the previous version of Creality Print. It's a pain, but it works for now. Or I slice models in Cura, save as STL, then load up in Creality Print v4 and print. Cura doesn't support K1 lineup either.
@3DRundown4 ай бұрын
All the K1 machines are now back, and updated, in CP5. Also, ORCA support K1 as well.
@LWJCarroll5 ай бұрын
Mmmmm 19:15 personally I wont use Creality Cloud, instead just walk it over to the Sonic Pad ? or printer on my usb stick. Laurie. NZ. 😊
@3DRundown5 ай бұрын
Whhhhhhy. Use Creality Cloud! Or, login directly to your Sonic Pad and send the file
@thomasheisler4 ай бұрын
Thanks for the video, it will be very helpful
@LWJCarroll5 ай бұрын
Do you know if this works for the Sonic Pad? Waiting for my Ender 3 S 1 Pro (Sonic Pad) and Plus to be supported. Thanks. Laurie. NZ. 😊
@3DRundown5 ай бұрын
No S1 profile yet
@amosdevonish58883 ай бұрын
Thanks for sharing this video. Simple and beautiful. I'm a first timer in the 3D printing field and this video has given me the confidence to start my journey into printing files I create. Keep up the great work and content.
@3DRundown3 ай бұрын
Be sure to catch my "Creality Print Tutorial" video ⭐️⭐️
@omarpasha98552 ай бұрын
There is no pull down for manage materials on my Creality Print V5.0 at all. What is this? I am trying to stay with you step by step. But, it's impossible if I don't have the same pull down menu.
@3DRundown2 ай бұрын
Are you on Version 5.3?
@omarpasha98552 ай бұрын
@@3DRundown When I press About Creality Print it says Creality Print V5.1.1.9490 release. It's all messed up. It does not recognize my Ender-3 V3 SE 3D Printer. The firmware update on the SD card for the printer does not work. Then, I spent an extra $100 to buy the Nebula pad that does not communicate with the motherboard. What kind of product is this?
@3DRundown2 ай бұрын
I can't help you if you want to insult the product. We can only discuss your issue, and how to fix it. I believe 5.1 is current. There is 100% an SE profile on Creality Print 5. The firmware on the card will be out dated. You will want to download the latest version. I have a video on that. This is for MARLIN, not KLIPPER. If you have the Nebula pad, you won't be doing this. Nebula pad is very nice. It runs Klipper. I don't have a video for the conversion, but, I really should. I will try to do that soon. Join these groups, and post your issue, in detail, with photo or video: facebook.com/groups/ender3v3se facebook.com/groups/nebulapad/
@omarpasha98552 ай бұрын
@@3DRundown I finally got the software to give me the firmware upgrade that I wanted! I was just a little frustrated because a lot of things was happening. So, I apologize for sounding like I was somewhat insulting the product. But, I am right where I want to be at now.
@3DRundown10 күн бұрын
Great to hear. I understand your frustration. I get mad at these machines too!! I can be a little defensive, because I have friends at these companies. They are very kind to me. I like them allot. Super happy you are back up and running! How are things now?
@YouTubesGhost4 ай бұрын
Hope they gonna update soon and add other printers like my Ender 3 V2 Neo :/
@3DRundown4 ай бұрын
I'll try to make you a profile for it. I do need to post it in my Member feed and Patreon feed, for a few reasons. I'll try to have it done this week.
@YouTubesGhost4 ай бұрын
@@3DRundown thanks you the best!🙌🏼
@3DRundown4 ай бұрын
DONE! Test it and lemme know how it goes.
@YouTubesGhost4 ай бұрын
@@3DRundown works like a charm👍🏼 also greetings from Germany 🇩🇪
@paddy20814 ай бұрын
This is very helpful, thank you
@jaypouw22804 ай бұрын
noticed that the print speed has gone up for some of the test prints for example the benchy before on the k1 took 15 min now takes 28 min
@3DRundown4 ай бұрын
Try Hyper pla profile
@Airdog674 ай бұрын
Do you know when 5.0 is coming out for Mac?
@3DRundown4 ай бұрын
I don't. Hopefully soon.
@spyke35754 ай бұрын
Great video. K1C and KE user here. V5 not generating supports for some odd reason.for me anyway. Deleted and reinstalled a couple of times already.
@3DRundown4 ай бұрын
Somebody else had this. I resolved it for them. Trying to remember what it was. Check my 5.0 Tutorial video incase helpful. It's very detailed
@spyke35754 ай бұрын
@@3DRundown thank you. Have watched all thr videos you've released for CR-Pv5.0. Also downloaded v5.0.2 but still the same issue
@edwinov4 ай бұрын
4:23, I don't understand Creality, I've got an Ender-3 V3 SE, which is NOT listed.
@3DRundown4 ай бұрын
The SE is indeed available on the latest version of Creality Print 5.
@edwinov4 ай бұрын
@@3DRundown Nope, I re-downloaded and re-installed version 5.0.0.8636 (latest available for download at this moment) and it does *NOT* contain the SE version.
@3DRundown4 ай бұрын
You are running an ancient version of CP5. Many versions behind. You should be on 5.3. Get it here: github.com/CrealityOfficial/CrealityPrint/releases/download/v5.0.3/Creality_Print-v5.0.3.8736-win64-Release.exe
@edwinov4 ай бұрын
@@3DRundown Thank you so much! Crazy that they don't list that one on their website, I did not know they were on github. Thanks again!
@edwinov4 ай бұрын
@@3DRundown I'm going crazy here! I just downloaded from github version 5.0.3.8736, installed it, ran it, but AGAIN the ONLY printers listed under 'Add Printer' and Ender are : 'Ender-3 V3 KE' and 'Ender-3 V3'. The SE version as I *did* see listed in the latest CP4 version is STILL NOT there. WTH?
@Jago133814 ай бұрын
Thanks a lot for this video!!!
@montyreptilez79216 күн бұрын
Any idea why my ender 3 wont work with the print 5.0 says it doesn't support multi-plate
@3DRundown16 күн бұрын
Elaborate?
@montyreptilez79216 күн бұрын
@3DRundown I'm sorry I have no idea I'm new to this lol
@montyreptilez79216 күн бұрын
I'll have a model ready I slice it and then I tried to hit print all or print plate and I get an error saying this model doesn't not support multi plate printing
@3DRundown15 күн бұрын
P.S. Have you seen this: kzbin.info/www/bejne/d5WwZJqEmt92fc0si=sjazcf2i8t8B_uB5
@3DRundown15 күн бұрын
I would consider printing from CREALITY CLOUD. See it in action, here: kzbin.info/www/bejne/qmrWiJp_ea11jacsi=FzjoHP7HPDTmJtl_&t=631
@Dane-gg5eh4 ай бұрын
My Creality printers, an Ender 3 S1 and a CR M-4, are not listed in the Creality printers. How do we set up for them, or is it premature to use this for them?
@3DRundown4 ай бұрын
They only have there Klipper profiles ready. But, those will come after more testing. I am going to make some profiles, as I can. Probably CR-10 SE next. I do think they need to prioritize this. Hopefully they are
@Dane-gg5eh3 ай бұрын
@@3DRundown I've been checking out your videos on adding new printers, and it keeps referring to Creality Print version 5.0.3. Following the Github route, I was able to download and install the latest. But I still do not find all of those printers.
@DavidBealeakaFKD5 ай бұрын
on their Github page I read "Currently, Creality Print 5.0 is compatible with the following models: K1, K1C, K1Max, Ender-3 V3, Ender-3 V3 KE, Ender-3 V3 SE and Ender-3 S1 " I have the Ender 3 S1 Pro but it isn't listed as an option under printers in 5.0. Maybe later ??
@3DRundown5 ай бұрын
Hopefully they will expand to the older machines asap.
@Spliner695 ай бұрын
Ender 3 V3 SE was also not an option.
@3DRundown5 ай бұрын
Only Klipper machines so far. But, I posted an SE walkthrough today
@ryecharred27544 ай бұрын
is Flow Ratio still in % , noticed it has a decimal
@3DRundown4 ай бұрын
I haven't gotten to look at that, but I would think yes
@pylou70645 ай бұрын
Hey, great video :) i have creality 5.0.0 but when i look to the quality preset i have only the standard 0.2mm preset and not the others like quality. How can i have the others presets ? (edit: i have the ender 3 v3 ke)
@3DRundown5 ай бұрын
It's right under "PROCESS". The pulldown menu.
@pylou70645 ай бұрын
@@3DRundown Yes I know but when I want to change it, I have only the choice of Standard. Maybe it's specific with the ender 3 V3 ke and it is not available for now
@3DRundown5 ай бұрын
Yes. I have confirmed that is currently the situation
@edudias24 ай бұрын
Great job
@xxxxzorroxxxx5 ай бұрын
I don’t know how to add a printer. It’s not listed or it doesn’t give you an option to add a printer.
@EarthquakeCL4 ай бұрын
is very rare slicer, in mew, but my v3 SE is not there, only v3 KE
@3DRundown4 ай бұрын
How to Setup "Ender 3 V3 SE" on Creality Print 5.0. Full Profile Walkthrough. kzbin.info/www/bejne/raXNaHqGlNd8hZY
@JesseLorbeer4 ай бұрын
How to change the print speed in the new one?
@3DRundown4 ай бұрын
I will cover this more soon. For now: Watch this video: kzbin.info/www/bejne/raXNaHqGlNd8hZY
@aoertel4 ай бұрын
Great video! Many thanks!
@3DRundown4 ай бұрын
Catch my Followup CP5 Tutorial
@christopherismcaceas48685 ай бұрын
Nice video. Why can't creality make normal auto updates? or downloading from their site for now is only up to version 4.3...something, as is the same for auto updates on creality print. Just updated todays to a better version of 4.3..smthg , and it says i'm up to date. Need to check how many versions i missed :D
@christopherismcaceas48685 ай бұрын
They finally added new top and bottom shells as orca slicer has. Very nice. Was using orca for that and sometimes better supports and now I don't need orca slicer at all.
@christopherismcaceas48685 ай бұрын
And print time improved on a 4 hour print with default settings on 4.3 version , to 3h20m on a 5.0 version. Love these free software improvements. It's just that v3KE only has one 0.2mm profile now. Still... At least I can use the software.
@3DRundown5 ай бұрын
They need to fix that, but, I can't remember the last time I used anything but 0.2
@3DRundown5 ай бұрын
I got that V4 update also. I suspect they will make the full move to 5 after some community feedback.
@akura25 ай бұрын
Looks a little like bambu Slicer
@3DRundown5 ай бұрын
Indeed. Orca/Bambu. It's good to see some unity between the 3
@edgarlopez-negrete13915 ай бұрын
Hello, I looked at the Github for ages yesterday and couldnt find the how to install it. Thanks for showing me where the download button was!!! Reading through the features in the git hub Adaptive layers are mentioned but I don't see them anywhere in the settings, any chance you can point me in the right direction? Are you going to be doing videos on new features and their applicaiton?
@3DRundown5 ай бұрын
welcome. Github hurts my brain. I am swamped with things I'm expected to cover, for various people, ontop of my own plans, but, I'm going to try my darnedest to cover this more.
@JustAlb1n5 ай бұрын
If you look at the top row of icons it’s the last icon but you need to have your model selected for it to appear.
@edgarlopez-negrete13915 ай бұрын
@@JustAlb1n Thank you so much, with my monitor I cant make it appear as the settings menu hides it but if I hover over where it should be i can still click it!!!!
@JustAlb1n5 ай бұрын
@@edgarlopez-negrete1391 your welcome, how’s the slicer working for you ?
@ClunkGam1ng5 ай бұрын
just updated and still blue?
@3DRundown5 ай бұрын
Should be green and show the new splash screen and logo. It doesn't remove V4. Make sure actually opened V5
@chestercwright60705 ай бұрын
5.0 does not include the [C] series printers, such as CR-10 se.
@3DRundown5 ай бұрын
Not officially, YET.
@donholmen52265 ай бұрын
No, Apple version ?
@3DRundown4 ай бұрын
not yet
@daveduncan27485 ай бұрын
Overture ASA would not stick to my K1C's smooth PEI (with glue). It sticks well on the textured PEI build plate I bought on AliExpress for $9 (which also has a carbon fiber patterned PET surface on the flip side). Neither side has the slicone brush of the original K1c plate, but the K1c adjusts gracefully to that, automatically checking and verifying the brush is not there, then carefully wiping the nozzle directly on that area of the build plate.
@3DRundown5 ай бұрын
Smooth PEI has epic adhesion. Far better than textured. Keep in mind, the glue isn't for adhesion. It's for bed protection. I feel like maybe you overdo the glue. Speaking of glue, the Bambu Liquid glue is amazing on glass and smooth pei
@williamgreen33165 ай бұрын
I've had very little problems with abs or asa sticking to the creality smooth plate the K1 came with. I also got their textured plate and it works well too. I have also used Overture's nylon on the smooth plate to print some funnels, zero problems, I was actually shocked.
@3DRundown4 ай бұрын
K1 Smooth plate is amazing. This is what made me try one on my P1P and P1S, which I almost got rid off. Best thing ever. This one: shrsl.com/4ijn5
@daveduncan27484 ай бұрын
@@3DRundown PLA and PETG stick to the K1C smoothplate (with gluestick) quite well. Less so for ASA. Maybe if I washed off the glue, ASA would stick better.
@3DRundown4 ай бұрын
Keep in mind, glue stick, is not for adhesion. It's to protect the bed. Go *very* light when using it, or, skip it. Best bed glue is the Bambu Green Liquid. Holds amazing
@jamesrabey21294 ай бұрын
Well Done!
@3DRundown4 ай бұрын
Thank you! Catch my Tutorial also
@xxxxzorroxxxx5 ай бұрын
Question it doesn’t show my printer I have a Ender 3S one plus I don’t see it. I want to add my printer and my other creality.
@3DRundown4 ай бұрын
Only Klipper machines so far. Might be able to adapt my SE profile to the S1+
@xxxxzorroxxxx4 ай бұрын
@@3DRundown how do adapt? are they same profile ? Is the retraction the same on all creatily machines just wondering.
@3DRundown4 ай бұрын
No, there will be differences, depending on the Extruder, but, most DD machines, have similar retractions. I have an S1+, I will see about adding it to CP5.
@xxxxzorroxxxx4 ай бұрын
Thank you
@xxxxzorroxxxx4 ай бұрын
lol cr-m4
@Mr360alan5 ай бұрын
hey I just updated to 5.0 but I have the Se and dont see it listed dose this mean they will not add it or is it just becouse its still new ? will the Ke profile work with the Se ?
@cybergnetwork5885 ай бұрын
No, SE runs Marlin, KE runs Klipper
@3DRundown5 ай бұрын
I have not been able to work with it yet, but, I would choose the KE, then switch the config, to Marlin
@Mr360alan5 ай бұрын
@3DRundown ok I will give that a shot thanks I know people are saying it's still in beta but I'll like to try it out it looks amazing.
@voongnz4 ай бұрын
@@Mr360alanhey, how'd it work for you??
@Mr360alan4 ай бұрын
@voongnz not good I'm sticking with orca slicer for now. I check every 3 days but so far the Se is still not on it.
@TT-KAT5 ай бұрын
Thanks!
@3DRundown5 ай бұрын
Very welcome, and thank YOU. 🙏🏼
@jameswarrick17613 ай бұрын
So obviously they dont have many of their printers available for 5.0. I was having issues with the original Creality Slicer that I had. My printer kept getting an emergency shutdown code from the firmware/slicer. I saw someone say that there was a new Slicer update, which in turn was the 5.0. I downloaded the update and everything just went crazy. I couldnt select my Ender 3 s1 Plus so it was practically a terrible thing for me to do. I have uninstalled everything and trying to figure out which program works best for my printer. I appreciate all that you do for the 3D printing community and hope KZbin and others surely help keep your lights on good sir.
@3DRundown3 ай бұрын
1st, go to GITHUB, and download the latest CP5. I believe we are still on 5.0.3. I have profiles for the S1+ on my Patreon, and my Member feed. Hop in and grab it. Memberships start at like $3. Creality Slicer is absolute trash. Don't use that.
@jameswarrick17613 ай бұрын
I was using Creality but moved to Cura. I got cura working ok so far and doing a test print. I'll keep you posted. Thanks again good sir
@jameswarrick17613 ай бұрын
Ok so I am still having this problem. About 40 minutes into the print im getting Shutdown due to webhooks request. I'm thinking the printer is overheating internally. When the printer has been sitting off for quite a few hours and I first get it running and printing it works wonderfully but then this error happens. I restart immediately and continue the print which then works for about 10mins then this same error happens more and more frequently as I continue to restart the printer and continuing the print leading to the print shifting in upper layers. Any idea whats going on here?
@3DRundown3 ай бұрын
Are you printing from Creality Cloud or a Memory Card? Have you tried with a different memory card? Are you printing from Sonic Pad? If you are on Sonic Pad, change your USB Cable, and use a 5V Blocker.
@3DRundown3 ай бұрын
This cable: amzn.to/4cjbirH This blocker: amzn.to/3KNdWtT
@MsLostboysforever5 ай бұрын
Hi Can you tell me how to change the Z offset in version 5, I don’t seem to be able to find it. Thank you for a great tutorial.
@3DRundown5 ай бұрын
Z-OFFSET is done at the printer, not in the slicer. Never change it in the slicer (Which would be done via Klipper GCODE). DO NOT DO THAT.
@Irek_Poland5 ай бұрын
CURAlity. 😃
@3DRundown5 ай бұрын
Creality Print is nothing like Cura. Closer to Orca and Bambu, which copy from each other and Prusa. "Creality Slicer", was an old Cura
@peterkrasnitzer75573 ай бұрын
I have been working with 3D printers for 6 years. This is probably the worst slicer.
@3DRundown3 ай бұрын
6 years? Who cares. Means nothing. I made 50K my 1st year in 3D Printing. You "probably" a troll. 🤷🏻♂️
@peterkrasnitzer75573 ай бұрын
oh, that's a really clever one. can you show me the function for changing the filament in layer x?
@therealjonaswp6024 ай бұрын
So I finally got myself together and got creality 5.0... Holy cra.... a huge difference. I am drooling haha! :D Hmm would you also recommend setting the bedplate temp to 60 when using Hyper PLA? Just like you, Hyper PLA is my go-to PLA. A bit annoyed that I cannot find the skirt choice under bed adhesion settings. Wonder if they removed that specific adhesion?
@3DRundown4 ай бұрын
Yes. 60 always. The Skirt is there. Check my Creality Print 5.0 Tutorial video