Intro to PROJECTOR SEWING + my $80 setup 💡🪡

[@jstevenson1042]

This was so helpful! I haven’t wanted to put the energy into figuring out a projector set up, but you make it look less intimidating.

[@jstevenson1042]

Also, the paper cut out demo of how it connects was clear and cute

[@teresamahoney]

@@jstevenson1042 Thank you so much! That makes me so happy to hear! The projector setup can come off as intimidating but once it’s set up, it’s such a time saver! Thanks for watching! And I hope you figure it out when you’re ready!

[@Sweet4chokoreeto]

I just found out this thing exist, it's so futuristic and clean, awesome.

[@teresamahoney]

@@Sweet4chokoreeto Thanks for watching! And yes! I love that we can bring modern tools to an art/craft like this to make it easier!

[@MaddieLynn]

This video is insanely well made! So glad you filmed this because I’ve been wanting to learn how to set up my EPSON projector

[@teresamahoney]

@@MaddieLynn thank you so much!! Hope it can be helpful to you! Let me know how it goes! 💕

[@all_tingz_squeaky4543]

I used a vivo tv stand to mount my projector to and cast to my sewing table. It works perfectly

[@teresamahoney]

@@all_tingz_squeaky4543 What kind of projector did you end up getting? Awesome to hear you have a set that works for you! 👏

[@all_tingz_squeaky4543]

@teresamahoney I purchased the epson brightlink 475wi from ebay.

[@all_tingz_squeaky4543]

@teresamahoney I purchased an Epson brightlink 475wi off of ebay

[@tatianawatkins7827]

this was so helpful, I was on the fence on getting a projector just because I wasn't sure which one would be suitable for my sewing room and wasn't even sure how to set everything up. I also upcycle clothes as well and am just starting out with my business, so thanks for sharing this info. Also I had purchased the ditto when it first came out but ended up returning it just because the price was ridiculous and the fact that the subscription model was a let down. I would've liked if they somehow aloud you to support other indie pattern makers so that was a deal breaker for me.

[@teresamahoney]

So glad it was helpful! ♥️ Ya the Ditto price tag seemed really high when it first launched. It’s cheaper now but, knowing I can DIY a projector setup for even less money and have no monthly subscription, it’s hard to justify the price. They do now allow a “BYOP” option (bring your own pattern) but you still need to use third party apps to stitch them together (like the one I show in the video) if the pattern doesn’t have an A0 or pattern projector option. And yes that can unfortunately rule out some indie pattern options. Curious to know what you end up doing pattern projector-wise! And yay upcycling! So fun! 🤩

[@Narwal955]

Hey :) I love your video, it‘s so helpful. Just one quick question: How long did the calibration process take? I won‘t be able to just leave my projector on the table so I would have to calibrate it every time I use it. But if it doesn‘t take too long then I‘ll probably get one. ;)

[@teresamahoney]

@@Narwal955 thank you for watching! Glad it could be helpful! The first time calibrating took a little longer only because I was still figuring out how to use the Pattern Projector site, but now that I know what to do, it’s a matter of a couple minutes. Should be quick after you do it once, especially if you’ll be putting the projector in the same place each time. Hope that helps! Let me know what you end up deciding!

[@trishpowell8160]

Hey Teresa, nice video showing your process. I didn’t know PP could help with gaps! That was super helpful. I have a UST Epson 475. One question I have - when you go to cut the fabric, do you trace first, then cut, or just go for it and cut with the projection lines? I was finding that the fabric can shift around a little. Curious as to how you do the next step of getting the pieces cut. Thanks for a great video

[@teresamahoney]

@@trishpowell8160 So glad you found the closing gaps tip helpful! Re: cutting, I’m still experimenting with what works best for me, but so far just pressing with my hand firmly while using my rotary cutter gets the job done (and if the fabric moves, I just reposition it according to the projected lines). But weights are also a good option to keep fabric in place (literally anything heavy: can of chili, rock, paper weight, etc.) I’ve also heard of some people using a piece of sheet metal under their cutting mat and using magnets! But it also depends on what shape you’re cutting and what fabric. Could also try a smaller rotary for smaller curves for a little more precision and less movement? Hope that’s helpful! Let me know what ends up working for you!

[@laurahovey391]

I would consider getting a shelf to mount the projector on the wall rather than trading out projectors if you want to save space.

[@teresamahoney]

Thanks for watching! That’s definitely a great option too!

[@swaters3462]

Is it possible to do multiple sizes instead of just one? Just one doesn’t work for me.

[@teresamahoney]

Do you mean project multiple sizes? For example, project then cut a size medium. Then, project and cut a size large? If so, yes! Projector patterns will let you project all the sizes included in the pattern.

[@swaters3462]

@@teresamahoney Exactly what I needed to know. Thanks. Good luck. Keep posting.

[@teresamahoney]

@@swaters3462 Happy to help and happy sewing! Cheers, Teresa