Introduction to Conext XW Pro UL for Solar + Storage Systems

In this webinar, Sandra Herrera provides an overview of our new hybrid inverter/charger, Conext™ XW Pro, including features and applications.
Conext™ XW Pro solar hybrid inverter/charger is a future-ready solution that is designed as the ultimate backup power and off-grid performance solution for solar & storage applications. The XW Pro 120/240V is compliant with Rule 21, HECO Rule 14H, UL 1741 SA and PREPA.
►Click here to learn more about what the XW Pro can do for you: solar.schneider-electric.com/...
-------------------------------------------------------------------------
►Click here to subscribe to Schneider Electric Solar Business: kzbin.info...
Connect with Schneider Electric:
►Solar Business Website: solar.schneider-electric.com
►Visit our blog: solar.schneider-electric.com/...
►Twitter: / sesolar
►LinkedIn: / se-solar

[@norsk54472]

Love this video. As a DIY home owner, I first installed my system back in 2000 with a Trace SW4024 inverter. It is still running my system. But I recently decided to refactor and update my system with new panels, more arrays, new charge controllers, new batteries and new inverter. Yeah, just the wires/conduit will be left. After research, I chose the SE product line and time is showing me that this was the right choice for me. I have 2 MPPT 60/150s now and love them over the 20 year old MPPT controllers I had (and re-sold). The Gateway is so useful and feature rich. And the XW Pro that I will be upgrading the SW4024 with, is spot on a great system. I will be designing my power wall to support 2 inverters with the full PDP. Thank you for this video as it opened up greater insight into how the Pro's architecture is intended and how you as a company are getting to the future result. Thumbs up

[@dythewitt]

Top-notch video presentation! I was another product manufacturer fan (OB), but quickly realized and moved to (SE XW+). I have a DIY system and was wondering from the presentation (32:32) if the system is a full off grid with 2-XW, can they not go 17KW overload the fact that the internal relays don’t need to do any switching?

[@jmwyauco8431]

Buenos dias.Gracias por el seminario.Estoy en las de comprar un inversor y losX PRO me encantan . Soy de Puerto Rico y nesesito mas info con relacion a las garantias y las especificaciones. Gracias.

[@luisalejandro5727]

Buenas tarde , Sandra donde están tus videos ,me hacen falta GRACIAS!!!

[@dannaigambi8949]

Thank you for the great presentation. I would like to know if the GRID SELL LIMITING feature in the presentation (24:10)can be can be introduced into the XW+ by firmware upgrade. Secondly, I would like to know if the XWPro is now available in Export or European version.

[@Impakzy]

Great presentation and product. However, with the growing popularity acceptance of lithium batteries like Weco, BYD, Pylontech, etc. with external BMU/BMS are you doing anything to enable the XW+ to work in Close loop or are we stuck with the open loop? Secondly, do a home owner need to replace their Combox with the near Gateway?

[@Miweatherspotter1]

Can you make the grid sell features work with AC coupling? It would be very handy to have it take extra solar flowing by and charge the battery’s.....

[@TungNguyen-ir8bo]

Character In the video It's great, I like it a lot $$

[@AndrewBorders]

Hello. Is the Application Note available for programming and setting up the compatible external meter (WattNode)? Using the export to grid on AC1 while maintaining current exported to grid at 0, what is the max output from the inverter (6.8kW)? If exporting to the grid at 0 amps and the only load is the main distribution panel, is it required to have anything connected to AC Out on the inverter in order for exporting back on AC1 to function? Ideally, I would like to back feed my main panel and not have to run my loads through a separate sub-panel. And last question, if the grid goes to 0V, will the inverter still output through AC1 and thereby feed the load with grid not present? Thank you for your time.

[@bugzy2426]

good how much pv can i input on one xw pro 6848 getting ready to get my system together

[@bugzy2426]

SchneiderSolar ok nice thanks for so if i have two xw+ 6848 i can put four 80 600 cc on that system in a off grid system

[@babyUFO.]

Yeah, well my xw6848 couldn't sustain 7.5kw for 5 minutes without a thermal shutdown. How do I limit it to 6000 so it can handle my 32A car charger without overheating?

[@ericbentsen1597]

XW Pro can provide 6.8kW (28A) continuously and 8.5kW for 30 minutes at 25C (77F). At higher ambient temeratures the XW Pro will derate. The derating chart is on pg. 134 of the manual. solar.schneider-electric.com/wp-content/uploads/2020/10/ML202003_Conext-XW-Pro-NA-Owners-Guide-990-91227A-01.pdf Unless your charger has a setting where it consumes less power, it sounds like you need a 2nd XW Pro.

[@kekukunairvine6627]

What is your onsite tech support number?

[@raghavshankara5601]

@26:28 it should be 30 sec!

[@Z-add]

Your website is completely useless in explaining the difference between your various products xw pro, Xw+ and sw. This video helps.

[@SESolar]

Hi Ziyad, thank you for your comment! I'm so sorry that our website was not helpful enough. Your feedback will help us improve our website. I'm glad that this video could help!

[@rodolforivera7416]

Como programar el Conext XW6848 PRO ? GRACIAS.

[@SESolar]

Muchas gracias por ponerse en contacto con nosotros. Parece que está buscando soporte técnico.¿Podría enviar este formulario para que nuestro agente de soporte técnico pueda ayudarle? solar.schneider-electric.com/es/tech-support/netsuite-es/

[@caitlincourtney2121]

Character In the video It's great, I like it a lot $$