Introduction to VLAN's on the Cloud Router Switch

[@kimotroph9683]

Excellent presentation. Very smooth and demonstrative. I picked up a lot of good information on VLAN relationship with regards to their solution. Also helped me understand network engineering better. Thanks.

[@josuemacias]

Very detailed and helpful explanation. I read through the CRS Mikrotik wiki on VLANs and followed the VLAN configuration example I was trying to achieve without a solid understanding of what the underlying functions of each procedure did. Great upload, thanks!

[@KaldekBoch]

Is there an updated version of this for the new bridge configuration model?

[@MarcelloDiMarino]

Great presentation. I'd like to see more videos about this assumption, with deep explanations. Congratulations!

[@an_R_key]

This is really nice. So powerful! Thanks for this helpful and valuable tutorial.

[@zxved]

Be carefull, this info is not relevant since RouterOS v6.41 new bridge implementation

[@Hypernerdwithcam]

I am interested in a CSS326-24G-2S+RM but I can't really find any information regarding the soundlevel on thoose. How loud are they? Or could I place them in my livingroom?

[@webluke]

Most of Mikrotik's equipment is passively cooled with no moving parts, so it should be silent. The metal case for that switch has mounting for a fan but no fan by default. I personally use a CRS125-24G-1S-2HnD-IN at home, and CRS125-24G-1S-RM at work and they are silent and run cool. The CSS is a switch just so you are sure you want to get that one over the CRS that is a Router+Switch.

[@AP-qc9hi]

At 17:51, why is the address asociated to interface vlan11, instead of ether1?

[@ramadunz]

Hello how about aggregate 2 ports to back to core switches ? Is it possible to do it ? without using bonding

[@SuperChopperpilot]

I just purchased a CRS328-24P-4S and when I try to boot into SwitchOS it just loops. What would cause that? Also, how can I update switchOS?

[@kristianpatino9770]

Hi, i have a crs326 and i´m not understard that i could not see this commands inside, dissapears?

[@williamnel7448]

Hi Guys Any place where i could download the pdf? this is really helpfull, Thank you!

[@xgamer]

When he start talking about slaving ports i knew this was an outdated presentation

[@enderst81]

Tried following along with a CRS354-48G-4S+2Q+ takes for me a ride on the failbus. [admin@MikroTik] /interface ethernet> set [ find default-name=ether48 ] master-port=ether1 expected end of command (line 1 column 35)

[@davel8116]

Ethernet frames. IP packets.

[@lightspeed79]

DePaul is not accredited by ABET :(

[@PingByte]

Anyone know where to get the slides?

[@cheatguner]

mum.mikrotik.com//presentations/US16/presentation_2937_1462452151.pdf

[@kras_mazov]

Warning: it is outdated in 2022.