INUKE nu4 6000 & sound system wiring Part 2

[@RitchieCaron]

You need to use the crossovers, leave it in stereo and use A/B for tops, low cut on. C/D on subs, hi cut on and the system will be much louder and clearer.

[@doskoreanitos2588]

That’s amazing. I’m making the switch with all of my woofers. I’m doing all powered tops and pure spl bass lows so I just bought this one in the 12000 series

[@Djshaw1kinglegend]

Kool, thanks for watching and share the knowledge 👍🏾

[@droper683]

Boy brethren you inspire me. Me ago build me thing but no so big just enough fi me home. Respect bredda good vid.

[@Djshaw1kinglegend]

Respect bredda, glad to be of inspiration thanks for watching.

[@INTRIGUESOUND]

Great video general Blessed love Sound sounds really good iyah.

[@merctr2]

I completely agree with you on that I have had Yorkvilles audio pro QSC crown all the top brands myself I sold them all and have all Inuke now Nice and light weight an incredible power nice video cheers

[@yulmoncrieffe4888]

Nice basic tutorial bro... Keep doing what you doing man

[@Djshaw1kinglegend]

Yul Moncrieffe Thanks I appreciate the support man.

[@cazlight1109]

Its bass sound like murder with just 1 VU light up, drop clean with only a phone recording, its got big Love big bass gonna order mine nx4 6000 soon , thanks for the demo your extra bad!

[@Djshaw1kinglegend]

Thanks man I appreciate the comment. Order soon as they no longer make them , there is a new design which are black not sure if they have in 4 channel as mine. Please subscribe thanks

[@eng-3998]

The knobs on the front of the amp are the input voltage. You can turn them up 15 clicks to the right before you get a clipped signal. The amp has been bench tested on Avsforum to prove this. Then go into the software on your laptop and adjust the gain from there for maximum output before clipping

[@jeremyr8793]

nice video, just bought this amp, waiting to try this out with JBLs

[@atcordice]

sound good bro... vocals clear and bass smooth and the hi end clear and smooth

[@Djshaw1kinglegend]

Andre Cordice thanks man I appreciate you watching. Please subscribe

[@ZionCage]

Hey Bro all u need is a pre amp from the mixer to the power amp and that behringer Power amp with pound them speakers like there is no tomorrow.. Nice video enjoyed it ..Keep up the good work.. Pre Amp will make a Big Difference ... u will seee..

[@Djshaw1kinglegend]

Zion Cage hey, i will try it, thanks for watching.

[@ZionCage]

No problem .. Thanks for the video

[@ZionCage]

Hey Bro also do u have a power conditioner??? .. I would recommend a Power conditioner too .. Power surges is not nice when u go to a dj and u don't have clean power .. Love the setup bro.. I love the behringer products .. My setup is currently Behringer almost everything .. Just waiting until i have a little bit of cash to buy one of 1 inuke series power amps..

[@Djshaw1kinglegend]

Zion Cage yeah I have, its definitely a must. I appreciate you looking out. Please subscribe and I'll do the same. Thanks

[@ZionCage]

I am already subscribed and liked

[@Ribbitmefoot]

Big Errol Dunkley special King... nuff respect

[@Djshaw1kinglegend]

Thanks. Respect

[@DJ1Hands1on]

I love passive also just got a sweet deal on some yorkvilles set

[@Djshaw1kinglegend]

DJ1Hands1on kool man, thanks for watching.

[@travisgulley2652]

When setting everything on your mixing console to the 12 o clock position would the same thing apply to the knobs on the front of the behringer inuke nu 6000 power amplifier

[@Djshaw1kinglegend]

Yes, these kinds of amplifiers don't do well with there gain knobs pass 12 o'clock position as this will encourage faster clipping and distortion. Thanks for watching 👍🏾 share the knowledge and subscribe please 🔊✅

[@eltonkittrell8720]

I have a crown amp....nice little rack..

[@Yousitech]

I would reccomend that you use the crossover switches to send highs to your tops and lows to your subs

[@Djshaw1kinglegend]

Yousitech yes I'm using them as well. Thanks

[@morenongrabbit]

Nice one Bro.

[@ricklava11]

Sounds very good clean

[@Djshaw1kinglegend]

Nash Edwards thanks

[@ERROLBARROWS-di3gy]

WHATS THE PRICE? AND WHERE CAN I PURCHASE ONE PLUS WHERE CAN I BUY A 12000 WATTS BEHRINGER POWER AMPLIFIER 👍🏻🇯🇲🙏🏻

[@cheddyvishal836]

I have one like this but electricity in my country is not stable so very often the goes to protection that's mean it cut the sound and let it back after some minutes

[@KB1285]

Thinking about buying this amp what you think is yours still running strong and how much have you pushed it

[@Djshaw1kinglegend]

Hey thanks for watching. Inuke nu6000 still operating like the first day no issues, as i use it to play my tops and its great. Great price and performance for the money. Thanks

[@mantukau]

Hey bro. I want you to ask about crown macro tech 5002vz.. maybe you have volume knobs for sell? And some output transistors?

[@djdonlee9107]

Nu4 6000 still playing? I have one also but afraid to gig with it... It does some really strange stuff when I power it up, very loud buzz then goes into protect if the room is cold.. if i switch it off then back on it fires up and plays fine for the rest of the time listening. I am only using it for sub duty in practice powering two QSC E118sw not bridged or anything..Ive been looking at the CVR D-3302 and BORTEC LAB D300.2 but the I nuke still plays. what would cause this, is it worth repairing? can it be repaired?

[@chuckbelloise2565]

How do i bridge INUKE NU4-6000 into a stereo amp (from 4ch to 2 channel) ??? .. What inputs do you use (which one for each side) and what speaker outputs do I use (which one for each side)???

[@Djshaw1kinglegend]

Hey, for 4 channel to 2 channel operation there is a speakon wiring diagram on the back panel of amplifier that shows how to bridge. The way I show the hookup in video is also another way of using 2 inputs to 4 speaker outputs. Thanks for watching.

[@DJSHADDY2K7]

Are there any repair company that repeir these ampilier?

[@jason3000tt]

Hey great vid bro. Considering one of these; How are they doing? See you got the 12000 also?

[@Djshaw1kinglegend]

Hey I Appreciate you watching , there holding up great no complaints. Thanks

[@eltonkittrell8720]

Speakers is nice nice

[@dtwistrewind7361]

Check out Williston audio test of this amp on the dyno, it gets nowhere near the stated output, someone needs to sue these manufacturer's for quoting specs that the units can never reach under any circumstances.

[@AlexIstEinGott]

There are companies way worse than beringer. Ever seen a skytec amp? Manufacturer / seller states something like 2x1kW and the actual power consumpion is ~100W. (that is if the amp doesnt start to burn)

[@hnic72]

Sue? Just buy another amp and move on, cupcake. I mean.. Your government and media lies to you every friggin day yet I don't hear you complaining about that shit. Get over it

[@hnic72]

@@AlexIstEinGott but behringer specifically states the rms power in the brochure which is what the amp makes. Peak power and rms are two different forms of measurement. Point being, they never lied to anyone

[@matthewmorehead41]

Ehm Ee sorry, but in every test I’ve seen, they have way over stated there power. They work fine, just overrated on power.. ✌️

[@travisgulley2652]

Technical pro is even worse

[@demariotownsend1228]

Can i use a preamp in my recording studio for my studio speakers

[@DJ1Hands1on]

Wow so these amps rank up there with crown & qsc them

[@simplelangperorock]

You have the amp on 'Bridge Mode'? You are using 2 channels on inputs (channel A? And you have 4 speakers running? The amp lets you do it? All speakers sound loud? Great video!😃

[@Djshaw1kinglegend]

hey thanks for watching. using MoNo when u only plug 2 inputs in the top 2, but all output speakers will work, which will make only 2 gain channel knob needed but combined wattage. select the switches as i did. thanks and please subscribe and share. any other questions please feel free to ask. thanks again.

[@3agbawi]

Hey! so when they're in mono, does that mean you can daisy chain the other 2 channels to another amp?

[@Djshaw1kinglegend]

Hani Muammar hey thanks for watching I appreciate it. I briefly checked the manual to see if the channel inputs were in parallel to be able to connect to another amp and I didn't see anything on that, so I'm gonna guess no. I know on some other amplifiers such as the Qsc Rmx series there is a parallel switch on them for that purpose. Thanks again.

[@3agbawi]

djshaw1kinglegend Thanks for the quick reply. You know I’ve had 2 of these amps for 2 years now and I still can’t figure out how to daisy chain them or why behringer has made them that way. The only way to connect 2 Inuke’s together is through a crossover

[@Djshaw1kinglegend]

Hani Muammar yeah or use some y splitters, 1 female xlr to 2 male xlr or reverse. For the price I won't complain you know what I mean. Lol

[@johnsmith-qz4bv]

how do you like this amp..?im looking at buying one to power 4 subwoofers 360 watts RMS each..?....720 peak each....

[@Djshaw1kinglegend]

john smith amp is great, still rocking hard. 360 watts is no sweat for this amp. Don't bridge just run 2 speakers per channel at 4 ohms and you can play worry free all night long. Thanks for watching and hope I helped. Please subscribe!

[@johnsmith-qz4bv]

thank you

[@kennyplay5982]

How do you set it if you use the amp strictly on bridge mode to run Subs only? Thx

[@brandonlowery2807]

Can you show me how to bridge this amp?

[@eltonkittrell8720]

I have passive in power aswell...

[@EBMproductions1]

Dude love your system now i'm deciding on Buying on this very same amp to use on my two 360watt RMS PA Mids and my single dual voice coil sub rated at 4000watts Rms and i need to know whats your opinion on this amp and also how its been holding up cuz i really just need 1800watts total but would like to run my sub on 4k and the mids on their rms so yeah man let me know thanx for the video i learned a few things here

[@Djshaw1kinglegend]

Erik Britz hey thanks for watching I really appreciate that, glad to be of help. Ok the inuke is great I have no complaints this amp is ah beast for the money you can't beat it. As For your subs this amp in bridge mode would be no problem, I would run it at 4ohms first so that's putting 2 speakers on one channel like I did in the video first cause the amp is a beast your speakers might not handle it. Thanks again for watching and subscribe please.

[@EBMproductions1]

haha the mids might get a bit man handled but i know the sub peaks at 10 000 watts so i believe it will be fine if its around 3000watts on a average use the mids i will be running on lo volume tho cause i know this amp can fry them but the point is currently my entire system is underpowered and this amp will fix that plus since i won't be using more then 720wats at gigs the amp probably will last long cuz the subwoofer is purely for at home use not gigs so yeah

[@doskoreanitos2588]

Whats the wattage in these woofers. Rms

[@Djshaw1kinglegend]

Those are 600watts. I've did a total rebuild watch my latest vids and share the knowledge. Thanks again for the support.

[@rsii5132]

Are your speakon cables wired in bridge mode and can you pan left and right channels with this set up?

[@Djshaw1kinglegend]

R SII hey what's up. No my speakon cables are normal. I have my system setup in mono so my tops are on one channel and my subs on the other coming out of the mixing console.

[@Djshaw1kinglegend]

Please SUPPORT the channel if you find our information useful and to get more reviews, tips and answering questions on Soundsystem gear or hookup. Send @ Cashapp $DjShaw1Kinglegend Thank you, any amount is greatly appreciated and goes to new gear.