how to make Propeller LED Pendulum Clock, using Arduino NANO, JLCPCB

[@inventorkr1]

What do you think about watching this click here💚💛💜💛❤️🧡💙🖤👇 kzbin.info/www/bejne/qYTOnJ2cdqmUfas

[@adc-tutorial0.1]

Les liens pour cablage et code ne sont pas valides

[@nageshhiremath8022]

@@adc-tutorial0.1 ye konsa language hai

[@alexfrozen]

Absolutely useless BS. De Cadance.

[@SciHeartJourney]

I love this video! 👍

[@santa_clauszzz]

Is all the products are available in flipkart/Amazon

[@SciHeartJourney]

Back in the 90's I saw a big one of these. It was like a stack of pancakes 4 feet tall and 5 foot radius (about 10 feet wide). So the display was a big curved surface on the side. That also kept people away from this big spinning arm with the LEDS. This is a very cool project!👍

[@1_and_only_Crjase]

This video is very helpful to my knowledge. Thank you for the sponsor too and the tool you used to make the circuit boards. I've been looking for these and you've just saved me heaps of time.

[@dustinmcdermont699]

How interesting! An inductive slip ring!!! Such a simple idea, yet so functional! Honestly this is the first time I have ever seen such a thing, Mind blown!!!

[@inventorkr1]

Thanks for your kind words

[@norliasmith]

Small tip, when you solder stranded wires with holders, heat the wire from the underside and add solder to the top side, that will make the solder wick down into the strands more thoroughly.

[@anthonyayala7167]

This whole video has some bad soldering practices. But for his purpose, I'm sure he doesn't care. Lmao

[@user-dm2bq7wk7y]

@@anthonyayala7167 I guess u know what's going on in Ukraine too

[@freevideoservice]

@@user-dm2bq7wk7y What is going on on Ukraine?

[@user-dm2bq7wk7y]

50 billion dollars should say something

[@masCha_97]

alhamdulillah.. ada orng indo yg bisa bikin project sprti itu, jadi gk bingung klo mau nyimak bahasanya😁

[@TheKaniss]

bukan orang indo mas, dr channel nya dia orang Prancis

[@masCha_97]

@@TheKaniss yaudah" yg pnting kata"nya bsa saya cerna 🤭😁 yuk coba 😎

[@LeeBeasley]

This is so cool. Love the use of the induction coils for power. Addressable RGB LEDs would be an amazing update to this project.

[@AIbeginsDotNet]

That use of wireless power transfer was genius, I might copy that ;)

[@jlucasound]

That must have been a lot of work to get that all balanced! :-) That is so innovative how you use the coils to provide power rather than a high friction rotary contact. I am liking this more and more!!

[@inventorkr1]

Thanks for your kind words

[@КоттМайский]

1:57 После того жёлтых светодиод вспыхнул красным цветом он решил уменьшить напряжение и остановил съёмку.

[@ВикторМ-у5э]

Привет из Луганска!

[@JacobP81]

I love how you don't explain every little detail. It's so elegent the way you go through all the assembly. Really cool video. Love it.

[@minecuber653]

This is just another level of nerdyness

[@mroplok-othok2888]

Keep your spirit from Indonesia

[@lass1234]

This man is like iron chef CHOP CHOP CHOP CHOP CHOP......

[@lesdeuxmondes]

I don't know anything about electronics, do you think I can realize your project that you showed us? I liked what your work you are the best.

[@ferraraweb]

Attenzione. Nello schema e sul PCB il sensore di Hall ha i pin 1 e 3 invertiti. Attention. In the schematic and on the PCB, the Hall sensor has pins 1 and 3 reversed.

[@arnoldbailey7550]

Awesome 🍻 I call it: fun with epilepsy 😁

[@harunservice8376]

Nice good...amazing.. From indonesia

[@luciann5691]

Great project !! I really want all details for that, this year i ve to present the license in electronics and comunications. I will try the same project, maybe with another microcontroller

[@inventorkr1]

inventorkr.blogspot.com/2021/06/how-to-make-propeller-led-pendulum-clock.html

[@hpwan5538]

@@inventorkr1 how can i make something like this, and where can i buy a tool like this video.. because the link in the description can't be typed... what is the name of the shop so I can shop

[@benjaminbadrakh1644]

@@hpwan5538 just click the link

[@mikbart251]

9

[@alexmaker6878]

Всё супер. Проект весьма интересный. В теории. Один вопрос - как обстоят дела со звуком? Шум самого движка, шум воздуха, рассекаемого платой с элементами - мозги не протекут после часа работы таких часов над ухом? Не подумайте не правильно - это не стеб. Это реальный вопрос, потому что, повторюсь, проект сам по себе весьма интересный.

[@TMRu22311]

This is a valid question. I imagine it would be pretty noisy. It really is a cool project though. I would look into making an acrylic case for it to contain most of the noise.

[@dominiksalata4234]

Itis still awesome that you made that! 👍👍😀😀

[@inventorkr1]

Your comment is important to me, thanks

[@lynasan8657]

Honestly, I'm still amazed by this video

[@thaythinhdaydien]

Your video was very good for beginers

[@Leksandar1]

Svaka cast,veliki pozdrav...

[@yeahhaye436]

​ @inventor KR Incredible project and finish. As an arduino newbie I find it very fascinating. I tried to follow the link to study the code and the "gerber" file but I couldn't find it. Could you upload it again? Thanks

[@Ale_giro]

Sono convinto che sto tizio mette il "mi piace+cuore ❤" a tutti.. E per dimostrarlo: ma vattelo a prendere in quel posto!! 😚

[@Ale_giro]

Come volevasi dimostrare 😇

[@tafsirnahian669]

The wireless setup was genius. But you can also use brush and commutator for high power application

[@cayenne7792]

the fan is brilliant !

[@dominiksalata4234]

You may forgot the fast flashing lights warning! 😖😵

[@aminrekabi8649]

9:35 Dr. Otto Octavius in Spider-man 2 🤣🤣😅😅

[@mosqit4324]

JEBUS CHRISTOFF HOW THE HECK IS THIS WORKING SO DAMN COOL

[@YantoKriwilMiri]

8:21 How long does this rotating axle last because there is no lubricant? And 9:38 why should it take so much grip? less efficient for me

[@banyakbacot4758]

OMG, BEST QUALITY PCB!

[@TejPrakash-tu1pr]

Very Very nice ❤❤❤❤❤

[@jugandoclasicos]

Man thats a first step for hologram keep doing this maybe Youll find the next step for tecnology

[@sunilkumar-em1cp]

This video is very helpful to my knowledge🙌👍

[@aavezgaming4399]

someone help me what is the name of the card which is using in 00:36 min. Please tell I love this project

[@ldchappell1]

Very cool. Great project for the bored fix it guy.

[@bluegizmo1983]

That's cool and all, but without an RTC chip, that thing isn't going to keep accurate time, and without any buttons or wifi, you'll have to keep reconnecting it to a computer via USB to re-adjust the time.

[@ThatOneRobloxDev]

Ikr, there is a Arduino that has wifi. I think it's called: Arduino Wi-Fi

[@yajuvendrasinghrajpurohit7888]

@@ThatOneRobloxDev its esp 32 node mcu

[@seferuzan3163]

@@yajuvendrasinghrajpurohit7888 it is normal ordinary ardiuno nano, atmega 328p

[@theonewhowas7709]

This dude really turned an old boom box into a PSU.. lol.. nice

[@alex_allier9]

Is a really great protect, but this video raised a lot my OCD

[@Pikachu.1412]

You definitely have to be trained very well by someone who has knowledge of electronics. 😉😉😉

[@lamarw7757]

Not really. It comes with instructions, and a parts list.

[@Ait-q8q]

Wow what a great idea 💡💜💜💜

[@SovereignKnight74]

I wish I could buy one of these pre-assembled, ready to go for a fair price.

[@batugunduz3950]

They used to be really popular back in the day. I remember seeing them through every store window. Guessing they fell out of fashion. Look on ebay, you may be able to find a cheap enough one. If my experience applies to the US too that is

[@ЕвгенийКоролёв-ы5о]

Поддерживаю движение DIY. Хотя идея не нова, некоторые решения сомнительны, а качество пайки немного хромает. Но все-равно это классно, творите и создавайте.

[@VG-kw8pt]

сюда очень подходит мем "как нарисовать лошадь". Самая сложная часть - сделать сам пропеллер. Нужно рассчитать, где должен быть центр масс, что за мотор используется (у меня мотор от вентилятора не подошел!), а информации по этой части в видео и по ссылкам "на отъебись"

[@cptnredbeard7303]

А какая разница какой мотор? Главное чтоб сумел разогнать скорость необходимую для полученния еффекта. А частоту вращения ардуинка считает датчиком холла. А вот вес подбирать реально какое то извращение. Уж проще сделать этот пропеллер симетричным относительно оси вращения.

[@VG-kw8pt]

@@cptnredbeard7303 в любом случае это самое сложное, а в видео об этом ни слова

[@veomadonnathebestdog.7936]

Сказиье посалуйта, энто пошти готовиый консрктптор?

[@adamprout186]

Hi, what psi’s are you using to power the motor and the nano please

[@BambangSoetedja38]

I like sir. I'm from indonesia👍👍

[@21wanted75]

Super projet, très intéressant, j'aurais aimé voir le programme Arduino dans la nano svp et un schéma électrique complet

[@pierrek1532]

C’est un beau projet mais qui ne peut pas indiquer l’heure… il n’y a ni wifi ni rtc à l’intérieur …

[@jerrodrollins1509]

Dude, this is soooo cool!!

[@Arifkhan0203]

This is awesome brother

[@원정원-m1v]

Wow is can makes clock and very good project

[@tatianemendes8199]

vc vende o relógio pronto?

[@xxxxxxxx9173]

Very good 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@timmorris171]

Would this be possible to do with a compass on the back of a Jeep spare tire cover

[@olehshewchenko6556]

Круто друже) давай ще цікавих проектів ) Вітання зі Львова))

[@franziskas.7594]

Amazing video!! Thank you so much for all the Tipps. Super inspiring 🙌🏻

[@inventorkr1]

🖐✅🌹

[@franziskas.7594]

@@inventorkr1 Is there a Bill of Material / Stückliste? I would like to try to recreate it. :)

[@ВиталийКовригин-е3ь]

Все круто, но зачем так усложнять? Можно просто взять кусочек адресной светодиодной ленты с высокой плотностью пикселя и ардуино, и сделать тот же проект...

[@Rin_Media]

Классно, может покажешь как?

[@karonte123]

Saludos. Donde puedo conseguir el soporte con los brazos y los caimanes.Gacias.

[@RixtronixLAB]

Keep it up, nice video, thank you for sharing it :)

[@lancemcque1459]

Where can I get the PCB?

[@buddybuythis3889]

I want some too.

[@estebanmazoloaiza172]

WFAAA INCREIBLEE!

[@robertlaube574]

When i was a kid maybe 10. i thought about something like this on car tires, but an image not the time. Now ots possible , cool.

[@giuseppevillella9445]

Super creator 😊👏

[@cathelenaa]

Can you make a ESP 32 and 0.96 OLED crypto price ticker (Which shows more than one crypto)? Asked this question to many youtubers but none made it

[@chadellett4696]

its more a recipes then an invention.

[@thomasmaughan4798]

Looks like a Weller temperature regulated soldering iron. Uses a magnetic tip and at a certain temperature the magnetic force disappears and the switch opens and when it cools down just a little the magnetic force returns and closes the switch.

[@harshans7712]

That was really informative and interesting, thanks a lot for this video, I gained some knowledge seeing your video

[@oksowhat]

This is the coolest project ever seen

[@balendrayadav6656]

will a sensorless motor work with a sensored esc?

[@HoangNguyen-gj1lg]

Very interesting. Hope you make more videos 😄

[@jaimeluis1901]

Muito bom!... incrível e funcional.

[@svrs]

Quite a twist in the plot.

[@MrPao987]

Am I the only one that realized he put the LEDs wrong the first time? Sorry I'm too much of an attention to detail guy, cool video!

[@laconeccionvideo]

Buen diseño, hace 10 años que he querido uno. Finalmente lo podre hacer en casa con CNC y Grabado láser; solo dure un poco en hacer las maquinas.

[@laconeccionvideo]

los diseños incluyen el sujetador de pcbs y algunos aditamentos también hechos con una impresora 3D hecha en casa.

[@SomdoK7]

Pôde atualizar o link de compra.

[@satishparmar5347]

Please provide purchase link for this circuit plate

[@MatthewSuffidy]

So it looks like the thing in the middle is an induction 5v supply, but I don't see any data lines. The sensor on the side of the board seems to be sensing a pass and thus is a timing element for the display. So you would have to somehow set the arduino's time and it is taking care of updating it? Any reason why not to just solder the 5v wires into the through hole? instead of on top of it.

[@ConsultingjoeOnline]

Why not us ws2812b leds?

[@vinayagamoorthyravindrakum8464]

Super... Show one video about simply looking digital clock hours. minutes and seconds. Using led. What r need how assembled

[@TECHHAMARA]

Garber file not found in the Blog link only pcb and diagram is it.

[@yuspianpertamana1347]

SAE pisan kang tutorialna

[@johnrichards3235]

Love this. So awesome

[@dfn808]

That is an awesome project. Thanks for sharing.

[@joseantoniolopes9724]

onde conceguimos os materiais pra montagem

[@VikasKumar-le6kj]

have you available 5.1 home theatre PCB with use of 5200 transistor

[@ivand8393]

and how did you balance it?

[@inventorkr1]

By putting weights on one side until you balance

[@bramrecourt7623]

HUH? ligt t nou aan mij of gaan al die ledjes er verkeerd om in :)

[@mesonspfc]

O link do arquivo Gerber não está abrindo.

[@robertmanyaran]

Lha njur tukune Ng ndi Ki,ng shoope Ono rak?

[@irwankfiransyah201]

Nice video..😎😎🤗🤗🤗🤗

[@Diamond-Daga]

Thank you for such an amazing video, is it possible to have a propeller clock which shows day, date, time, temperature and chimes for hour

[@thedude8046]

Very cool man!!

[@nidzeksmocni659]

Great video!

[@lalon1235]

buen video, me gustaria saber para que es el imán y el transistor (sensor hall?) que funcion tiene?

[@blackjackzygarde1404]

Is it possible to animate an object but using led strips/beads and more complex code?

[@steelbrotherhoodof2359]

hi there peeps. one question for ya. if you put a red led under a bleu led. instead of next to it. will the colors blend ? and with what rotation speed and mounting distance in correlation toowards that speed ? (singing for you a jollu good fellow...)

[@anushkamore7831]

Can't we purchase the object directly??? Is it only DIY?

[@inventorkr1]

DIY

[@javaidyousuf4113]

Sir mera sawal hai k aghar hum motor ki speed halki ya tez rakhange tau clock kam nhi kare ?