IoT based ESP8266 projects using Google Assistant Alexa & Cadio

[@anhtuanngo4774]

Can you guide use IR control 4 relay with cadio ?

[@afabulajr]

Hi! Thank you so much for your detailed instructions of controlling my esp32 by alexa thru cadio apps. I am sure i will enroll to your tutorial course soon.

[@muhammadnor4135]

I really like this project, it's easier and more complete, thank you sir for sharing your knowledge

[@TechStudyCell]

You are welcome

[@badrujjamanbokshi1772]

3:11 how to turn off booting process?

[@domnick356]

is there a way to turn on all relays at once with 1 command??

[@thesrijan49]

5 volt and 2 ampere power supply?

[@SalmaHadi-h5d]

Can i use ttp223 touch sensor in this automation???

[@Jagadishwaranads]

no log files were in the flash tools files the logs folder is empty help me with this issue

[@mahmudmohammed7155]

Your board not connected. Try another cable or your board has some issues.

[@Aura137R]

My manual switches not working 😢

[@shanthavela3882]

My device Wi-Fi not connecting process

[@shanthavela3882]

One year this project good working perfect🎉

[@tranhieu9068]

How can i cofig button, indicators, devices again? i only can config in fist time

[@bhaveshk_143]

Sir, 1 question. Which use jumper wire typ?? (Male to female ya male tomale) answer

[@ankitsaini4470]

Bro ma switch ke jagha ttp 223 capactive touch sensor use kar raha hu to kya edit karu

[@your.free.electrons]

Hi, will this project work with the esp8266-01 module?

[@arbaaz1126]

What if internet connectivity failure, How can i switch to normal switch

[@বিনয়েরসাথে]

This systems has one limitation it does not have any ac Dimmer but our own apps also allow simultaneously control any appliance current and voltage

[@Tinkoplayz]

Can we use 12v 4ch relay module

[@syedhassaanhaider2291]

Where your cable is connected to ??

[@jaibalayya39477]

Sir can you please do using only mobile including coding also in mobile because i don't have any laptop so pls help me sir

[@tinkomusic604]

plzzzzz reply m my relay cannot giving AC out to lights but relay light on and off with cadio buttons

[@tinkomusic604]

bro relay is working with cadio but on AC out ligh cant on but relay light is on

[@nagarava]

How to use ESP01 in place of ESP8266?

[@LokeshNod]

will relay turn on again if it is on now and power goes out and comes back?

[@yuvarajnaidu476]

Hi, small request can you please share the diagram printout layout to make using acrylic sheet.

[@ATULRGHARAT]

if want to change relay low to high trigger ,how to change

[@ankitjha3379]

I have esp8266 v3. Push 1 with gpio 10 (S3) is not working with push btn. I tried 5-6 times.

[@OnlyFor-nh5ng]

How to supply 5V to relay module

[@mahmudmohammed7155]

Hello How can I control without internet just with local wifi? Thank you

[@mihirchauhan215]

Hello sir I followed all your steps correctly but after configuration the relay is dimmed on but when I press the switch it glows more and does not get controlled through cadio app. Please help what is the issue

[@Ashok32194]

Yes i have also that problem

[@Ashok32194]

Jab me switch connect nahi kar raha only relay operate karta hu to hoti hai jaise hi switch connect ki all will be off slightly

[@punnatulasi]

hi, after configuration device is not showing in cadioapp can u plz tell me why its not showing to me and sometimes com port also not showing for me

[@GBENGAAJIBOLA-wg4ke]

Wow! This is a wonderful Project. I just did the project and everything is working fine. Thanks for the good work. But, Please Mr. Tech Study, How can I re-enter the configuration mode, to add some sensors and also change "Press" to "Normal" for the use of Latch Switches?

[@TechStudyCell]

You have to upload the firmware again.

[@udhayakumara4033]

What it means showing "trial"? Do we need to pay after trial period?

[@yuvarajnaidu476]

Can we combine this Project and ur universal remote problem... Please reply is yes what pins should I change

[@hassanahmad9597]

dose it need to reprogram it every 21 days?

[@storytown3899]

can i add touch sensor switch

[@musayyibkhan2151]

Thank you for sharing such a beautiful video. Please guide me because my one switch is working but other is not. I checked the wiring and configs but no luck. Same switch works in case wiring is switched between both switches.

[@sumantsagar2420]

Is the manual switch two way switch(spdt) or one way (spst)

[@harshdudhani580]

Sir Plz Give the link of BOM file and CPL file which you used in this projects

[@manoharsanapala6856]

why relays are always on even though i off them

[@AllynVibes]

I have the same issure, did you find a fix?

[@BeautifulEarth-qm6ov]

can i use more than 4 switch? if answer is yes then how

[@veera4132]

Hello can you make ir control with 2 fan and 4 lights

[@karansethi7030]

This feature already available in Cadio app. I already used 1 light using IR.

[@jeffordjameslogrono7070]

hi can i use this esp 8266 for 8 relay?

[@sunilpatil-qg6mx]

problem is we need to purchase licenses for every new iot that we configure on cadio.. 799/- per iot.. dont know about blink or other plarforms..

[@MXmoviesclip]

Can we give 5v from usb pin

[@rakeshc2723]

Can we integrate with home assistant

[@tashane_jayasinghe]

can u do it with 10 relays

[@ALLINONETeam]

How to add IR

[@aroadtosuccess6508]

Sir, Problem is in code sinric pro.h error.Please tell me I copied you code after some changes.

[@aasumcreation]

Please provide zero pcb circuit diagram of it.

[@nk6390]

Sir I have a question why we use only 5V relay and not 12V or 24V relay. sir why we don't use relay with optocoupler. Sir I want to automate my bathroom geyser since it is high power.

[@yuvarajnaidu476]

Hi, I'm really looking for same, can I have a same circuit with touch sensor ttp223

[@prataptech5380]

can you please provide code file in your description

[@vrushabhugale6171]

I am unable to upload the firm file into the ESP8266 microcontroller please help

[@AllynVibes]

This is what I had to do 1. Check device manager an ensure usb driver is installed 2. Verify the COM port by unpluging and seeing witch on disapears

[@anshulgupta9893]

@techstudycell Nice and very easy project for beginners like me... Can you please make same project using ESP32 for 4-6 switch, 1 fan with RF receiver

[@anshulgupta9893]

😊

[@rajansaini2368]

Dear sir please provide esp01 Cadio firmware.. It's note available on cadio site

[@edwinprawira2608]

Hello, i tried to use nodemcu CH340 but the switch 1 connected to pin SD3 is not working. Could you help for the solution or alternate pin for switch 1?. Thx

[@zlab3d]

On my Board esp8266 Lolin S3 = gpio9 SK = gpio10

[@zlab3d]

Saya Pakai SK = gpio10 working fine 😅

[@musayyibkhan2151]

​@@zlab3d Please let us know all the pin changed in V2 and V3

[@Alissaee]

If i perform the project without switches what will happen , with is the charges that I have to do?

[@TechStudyCell]

Just don't map the gpio for switch

[@munnauuu]

Sir nodemcu wifi reset kese kare

[@madhurusubhargava146]

Can we operate without internet ?

[@vijaybala185]

Yes, with Manual latch switch or push button switch we can operate without internet

[@gamman6576]

Adab bro i am from bangladesh i bought an esp32 but how can i set the program i don't have any laptop or computer i only have android mobile please help me bro

[@hasstv9393]

Is it possible to add fan dimmer?

[@TechStudyCell]

No

[@hasstv9393]

@@TechStudyCell Why bro?

[@firdoshdiakus4841]

@@hasstv9393 ask Cadio the developers

[@SarathiGhosh]

How do you know GPIO address for Configuration is D8 - 15 ? Can you also let me know GPIO address for configuration for ESP-01 ?

[@mrthakurmr5052]

How many area range control by automation

[@actionvinesofficialmovies7122]

♾️ infinite

[@yawarali4361]

Sir nice project but opisite worked when press on ,off relay and when press off, on relay how solve?

[@TechStudyCell]

If you are using active high relay, select relay mode Active High while configuring the ESP8266

[@twilightqueenbee4658]

@techstudycell can you pls send us the code that you used

[@SunilKumar-gg3ep]

Hi, Can you provide me the BOM and CPL files for this project to upload in jlcpcb

[@BhargavPatel-vk1sb]

your code is useless..it is not working.code send error in ardiuno while uplode

[@gamingwithsolo4542]

@Tech StudyCell: So can I use CADIO app for free lifetime?

[@firdoshdiakus4841]

You get nothing for free my friend

[@ysf_arzl1758]

does this cadio application we don't need to do coding in the arduino ide application?

[@TechStudyCell]

No Coding required

[@jithinjohn211]

Sir the NODEMCU didn't connect with cadio why

[@TechStudyCell]

pls follow the steps correctly

[@amireldm6008]

Hi, good afternoon, I've been watching the videos and they seem excellent, I congratulate you, I just have a question, in a previous video I saw how you made a temperature-dependent irrigation system with an ESP32, I would like to know how you can do the same project but now implementing the time; I mean that the same ESP32 can water plants both due to humidity and at a certain time

[@gamingwithsolo4542]

@Tech StudyCell Which is better CADIO or Blynk0.2

[@TechStudyCell]

Both are good. If you want to play with codes, go for Blynk or If you need features like Google assistant then use Cadio.

[@gamingwithsolo4542]

Which is better CADIO or Blynk0.2

[@firdoshdiakus4841]

Both depend on applications

[@বর্ষবরণ]

How can I do it by phone?

[@neeradr7145]

Does this project need wifi router

[@moviebyyashaggaming5235]

Yes😊

[@rajendrasaini1164]

Cadio firmware is free for life time or any limit

[@TechStudyCell]

Nothing is free for lifetime.. pls video their website

[@bohuslavkozdon5539]

Hello Tech StudyCell, I really like this CADIO app. I also tested this program on 4 bulbs and it works perfectly. What is the price of CADIO application full. And is it a one-time payment or monthly payments. Thanks for the information.

[@djzatka]

I want to buy it

[@vanshikatresajoshua524a2]

How to re-configuration please reply..

[@TechStudyCell]

reinstall the firmware and configure again

[@vanshikatresajoshua524a2]

@@TechStudyCell thanks bro...

[@santanubehera8111]

its a great site to exeperiment tq for shring all the knowledge about home automation can u share the pcb

[@TOGAMANYAMA-jt7kr]

Sir, good project👍, what make difference if you use either ESP32 or ESP8266? please! I am not challenge you but I need to understand

[@TechStudyCell]

You just have to upload ESP32 firmware for ESP32

[@gamingwithsolo4542]

Sir, i program how fo phone

[@mrprakash8754]

How to make staircase light in esp32

[@mrprakash8754]

kzbin.info/www/bejne/pqG9iZurnKZpadE kzbin.info/www/bejne/aaTcmpydZZadnJI

[@bholaansari1714]

Nice project cadio paide app hi charg Brother Plz door lock sistam keypad ya fingarprint lock video and cod

[@masudrahaman7497]

Hi Can you make a water leak detector wireless iot based With esp8266

[@masudrahaman7497]

Dear where are you ?

[@ramprasadnaskar1283]

Can i flash ESP 01 with CADIO?

[@TechStudyCell]

Yes

[@ramprasadnaskar1283]

@@TechStudyCell but now at the CADIO download link 2mb file is missing only 4mb file available there

[@ramprasadnaskar1283]

@@TechStudyCellsir, where can i get cadio 2mb flash file?

[@optoopto4474]

Sir ji, can I use it in this project instead of Wi-Fi router by connecting internet through mobile hotspot? 😢 Please reply sir.

[@mehargayatridigitals6845]

yes you can use mobile hotspot instead of router

[@chiruphotography9540]

hlo sir, can we control the fan speed using cadio application, if possible can u make an video of it, it will helpful to people, thank you.

[@saklogaming271]

Can i install it on esp01

[@TechStudyCell]

Yes

[@Shil6480]

Ambala may kaha rehte hai aP

[@Shil6480]

May Kaithal say hu Aap say milna chahta hu

[@abhinav6555]

where is the bcom file

[@javadino]

Hi.plaes can you giv me code by uplode for esp8266

[@MuhammadSaleem-ns3xu]

Hi, Sir can you provide me BOM and CPL file with Gerber file.

[@RushikeshTembare]

not connect before wi-fe

[@ABIRxLEO]

Esp program file need

[@pradiproy5323]

Cod ki kore input korbo phone dia

[@vcooltm8769]

is this app free during use

[@TechStudyCell]

I have used their free plan which is valid for 500hr. pls visit their website for paid plan

[@djzatka]

You didn't provide code buddy

[@TechStudyCell]

No Coding required. Please watch the complete video.

[@syedmutahir1917]

great love from kashmir Sir can it on of switch from any where from world

[@mkcreation999]

Google assistant not working

[@chandrasekharmannam]

Are you use in code or not

[@SMARSHER216]

Not