iPad Mini 2 Touch Screen Replacement

[@MovilonePhoneRepair]

*✅ Tools HERE* 👉👉 https:movilone.eu

[@brockkobe9594]

a tip : you can watch movies on flixzone. Been using them for watching all kinds of movies recently.

[@edgarandres7410]

@Brock Kobe yea, been using Flixzone} for since december myself =)

[@eduardobronson8653]

@Brock Kobe Yea, I have been using flixzone} for since december myself :)

[@leroyjamison5700]

@Brock Kobe yea, have been watching on Flixzone} for months myself =)

[@CBL138]

Might be a good idea to remove the battery connection before the other connections.

[@Common_Coreless]

True, I almost fried my iPhone replacing the screen. (it works fine still)

[@platinumc3ll]

@Abde Zen He didn't replace the LCD (which wasn't dead), he replaced just the glass. You have the remove the LCD to replace the glass as the connections are underneath it.

[@shuriKen469]

cheers for the disassembly/reassembly video. for anyone attempting this, make sure your new screen has the sleep/wake sensor. for some reason the screen i removed had one, but the new replacement didn't, so i had to go without that function. there are videos showing how to desolder the old sensor onto the new one, but none of them are for the iPad mini 2, which may be for the best cause mine was a strip integrated into the connector. again, the new one didn't have solder points so i wouldn't have been able to attach it anyways, just look for that sensor coming from the screen connector, then solder points, and then going to the home button.

[@mcchug86]

What is tape you used just cling film ?

[@TechSamiD1]

Thank you brother ❤❤❤

[@bigmaxwell6275]

do you have any recommended online screens?

[@stickerlawohq2699]

how do you put the adhesive back on the lcd touch?

[@natman_bad]

put it on the sides of the ipad

[@ИгорьРешетников-ъ2д]

Благодарю за съёмку крупным планом!

[@prudnikoff]

Thank you. It helped

[@Pero58si]

This was very helpful. Thank you.

[@MovilonePhoneRepair]

So nice to hear that! Thanks for watching! Best regards

[@dee9631]

Can I use a hairdryer instead of the heat gun?

[@luigi4204]

Yes

[@JLC3777]

Tenia una pregunta que precio tiene canbiar la pantalla de una ipad mini 2

[@shornzy]

As others have mentioned. Don't follow the order in this guide. I followed it and didn't disconnect the battery first, like it should be, and it killed the LCD.

[@natman_bad]

you dont have to disconnect the battery idk what youre saying but your comment is completely shit maybe you have the wrong ipad but with this ipad that isnt needed

[@jimmie93x]

Um i feel like you skipped the the part at the end which was the whole point to this video? Or did i miss something?

[@SachiAi]

Can i just skip to the last part?Because my only problem is the side of screen not the screen itself.Please comment ASAP

[@bboysjb]

You skip one part where is digitizer put back on it chip slot

[@shahkhan7836]

bboysjb ita circut price what

[@GAGALOVER1976]

Yeah I missed putting that back together and had to take it apart again and skip back to disassembly 🤷🏻‍♀️

[@justinmurphy3976]

I thought the Mini 2 lcd had some adhesive holding it down

[@BrianAnim]

That's what the heat gun is for.

[@GAGALOVER1976]

Would have been nice to put at the end how long to leave the clamps on for 🤨 Also some verbal or written instructions during would have been nice. And you missed putting on one of the connectors at the end. I had to take it partially back apart (thankfully not all), jump back to disassembly portion of vid and put it on as it was missed.

[@natman_bad]

if you would be a little smart you would just leave it on there for 1 hour lol imagine if he say to tell you that kind of things you have to be so dumb to take it of after 5 min lol

[@Anders_EU]

Thank you, everything worked perfectly for me👍

[@tayyabshah7175]

iPad mini 2 display to screen touch lagana hai

[@mobilecare1867]

Bhai pehle battery connector remove karna rehta hai

[@tayyabshah7175]

iPad a1489

[@陈程-i6b]

Good

[@dansavit]

IF YOU DONT DISCONNECT THE POWER CABLE YOU WILL BURN YOUR BACK LIGHT!

[@urmilathapabasnet4113]

I forgot to do that part is there any way that i can fix this without going to. Apple?

[@dansavit]

Urmila Thapabasnet you’ll probably need a new lcd now which is like $50, I did the same mistake and I don’t see any other way to fix it

[@dansavit]

Mytheroo I burned my backlight by forgetting this step. I believe it burns it when you reconnect the lcd while the battery is plugged in, that’s why you should plug the battery in last.

[@urjinabasnet3863]

Dan Savit So i broke my screen and ordered a new one. I did everything to repair expect i forgot the battery connecter and now i can turn it on but cant touch anything is that to do with the battery connector?

[@dansavit]

Urjina Basnet I don’t think, I think there’s a bad connection with the digitizer, try reconnecting it

[@LuzestudioEs]

Disconnect the battery or you will blow the backlight!!!!!

[@battlight3476]

You never actually put the touch screen back, but we get the idea.

[@MovilonePhoneRepair]

i don t understand what do you mean...please, if you can explain how do you get the ideea that i don t put the new screen..thanks