iPad Pro 12.9 with no touch after screen repair - Solutions in a hurry

iPad Pro with touch not working after screen repair. It was a filter next to the connector. I used the 6S backlight filter to replace it. It works :)
iFixLogicBoards...

[@abcab8129]

bro tell me please its ipad pro 2nd generation A1670 same filter . thanks

[@Yaroslavkomakha]

You are the best. This solution save my ipad

[@scoopof3d]

Perfect.

[@WhiteLion-gq6ck]

PUT IT IN!

[@williamsimao]

i had not 6s backlight, and i trying jumper him... touch back work perfectly after jump.... my question is in future i will be problem in something?

[@A_Pi]

i did the same because didn't have any iphone 6s . good so far .

[@thomasosullivan1281]

Hello I was wondering I've you've ever come into this problem!? Screen replaced, all works fine touch screen finger print id, but when I click on the home button it makes the click sound but dose not do anything won't exit apps etc? Any advice would be great thank you :)

[@scoopof3d]

Is that the one you solder the plate over to new screen? maybe some joints are not connected.

[@thomasosullivan1281]

ScoopOf3D all solder points are 100% checked they are correctly lined up and soldered, was just wondering if it could be a chip or fuse somewhere that might be defective?

[@robmpps13]

Hey, if you connect the old screen does the touch sensor work normally? I have two new screens and both don’t work but the old one does.

[@scoopof3d]

With blown filter no touch screen will work. Did you transfer the board correctly?

[@WhiteLion-gq6ck]

HERE WE GO!

[@giannicanzoneri4296]

hi, i was watching your board and seems (at 0:17) you have changed also the 2 backlight filters of the ipad pro (the 2 big guys on the left side with the flux residue on them). since there is no schematics available, can you tell me which components did you use to replace them? i have same board with 1 component missing...

[@scoopof3d]

Hi, sorry for late reply. I put flux on it but didn't touch them.

[@kazeminara7558]

S

[@WhiteLion-gq6ck]

Damn what a cute!

[@FarOutDesignFL]

This video makes me hungry