I like this real video that normally was recorded As is.
@BrianHagen-m4g Жыл бұрын
would you mind adding a link to your orange handled scrappers for the glue please? Thank you
@daftnord49572 ай бұрын
i had a piece of kapton tape rip one of the cables off the flash light. wonder if that can be jumper wired
@bambambino23 Жыл бұрын
I can’t believe that Apple designed the phone that you have to scrape and break glass shards to replace they’re cheap back glass
@InUrGirl Жыл бұрын
Shits dumb af
@Whippetiggy Жыл бұрын
Their
@bambambino23 Жыл бұрын
@MrScrimbo1 I thought I was the only one that did that LOL. But I actually just meant the word "the" LOL
@Whippetiggy Жыл бұрын
@@bambambino23 Oh yea lol, I didn’t even pick up that it was supposed to be “the” It irritates me the most when people don’t know the difference between “bought” and “Brought” I don’t know why, I’m shit at spelling and didn’t even get my English gcse 😂 If my phone didn’t highlight my mistakes I couldn’t say shit to anyone!
@joshharper7242 Жыл бұрын
The purpose is to get you to buy a whole new phone instead of going through this tedious process.
@stephenanderson88132 жыл бұрын
This is the second of your videos I have watched and during the start of this video I was thinking, Oh yeah by now I would have ripped the NFC or something, I kinda wish one of these "pro's" would mess something up, and POW you broke a back glass. I would like to thank you for doing that. Now I know I am not the only one to make little mistakes like that. Great video by the way
@mandeepsingh-wx1ij2 жыл бұрын
Hey, can you list the types of blades you was using when removing the glass, Thanks.
@steenkronhjlarsen25752 ай бұрын
Thanks for the video. But you use two types of glue. What is the black one? And what kind of liquid do you use to loosen the screen and other glue? You use it around the cameras. I have also tried the thing with the back glass. But then I bought from another dealer and it fit better.
@a.abilesha.abilesh131 Жыл бұрын
How much cost is the back glass for 13pro max
@raheelkhan4302 ай бұрын
is it still water pack?
@irepairofpc31familykartrac512 жыл бұрын
What happens if you are missing some of the magnets for the wireless charger?
@lightwxrk2 жыл бұрын
not an issue, magsafe still works fine if missing a few pieces
@chadmiller756 Жыл бұрын
Ok so I have a regular heat gun not a small one like this. Not sure if it matters ,but I'm sure it does a concentrated areas. With that said you going through the glass no issues at all compared to me. I only got the glass removed in the middle and areas where there was soft spots like antenna are and just a little at the bottom. Does glue removel help alot ? And is it dangerous to use?
@CJ-uu3lk10 ай бұрын
Just be careful not to pull antenna and yes u should order decent heat station for 80 to 200$ and put Kaplan tape over that flash led light or it will melt and it's very easy to do ask me how I know 😂
@chadmiller75610 ай бұрын
@CJ-uu3lk lol I took it to a shop and paid $100. There were areas I couldn't get the glass off. You realize I put the message up almost year ago. You must not check your channel often.
@CJ-uu3lk10 ай бұрын
Also noted to wholesale refurb shops use cold press with gun and small 1mm and 2mm tip makes all of the difference in world ans kaplan tape over led flashlight but overall he did good video showing how to repair with no laser machine
@tetaizozadja7080 Жыл бұрын
when I do this repair i remove logicboard, camera, face id and flashligt, yes it's more work but I think it's much safer
@henriksvensson283611 ай бұрын
nice, how long would you say you spend on back glass repair per phone?
@lukajacob5330 Жыл бұрын
Hey there what's the cable at 17:48? mine is cut and faceID stopped working alongside the 0.5 and telephoto lens. Im wondering if that snapped cable is the reason or not?
@Dziobak409 Жыл бұрын
what's the name of the black glue you're using?
@randooopik5019 Жыл бұрын
B7000
@rayleilani7486 Жыл бұрын
Do you know where I can buy the back glass with the logo? The links you provided were taken down
@person19863456 Жыл бұрын
Why don’t you use the back glass laser machine
@nicholaswolfe5783 Жыл бұрын
Hey so when I used the glass breaker it dented the inside how do I change the force or pressure?
@auxc.680510 ай бұрын
Dont use a glass breaker bro this guy is crazy. Use a spatula and a heat gun. Just keep hitting the phone till youve got an in and then pry the rest off.
@theoriginaldreadpirateroberts Жыл бұрын
THIS is exactly why I do not repair back glass on iPhone 13 series and below. What a nightmare and a mess. I'm glad they have a replaceable back glass on the 14 series now - it's about time.
@graazioso Жыл бұрын
should i bring mine to apple to get fixed or should i go to a repair shop?
@JohnEliuk-g4r Жыл бұрын
where do you get your blades??? i need some like that!
@danielwhite3048 Жыл бұрын
Don’t use punch toll near back camera and where the main board is placed. Back camera doesn’t not work properly like no focus and shaky. Main board is super sensitive and easily damaged by shock
@dwylhq874 Жыл бұрын
25:43 when the rear glass breaks it's clear how fragile this is! 😕
@pkendall99 Жыл бұрын
once the glass is removed, is the iphone no longer water resistant?
@manrajgill65282 жыл бұрын
sir I tried doing like u on my iPhone 13 pro max but I by mistakenly I removed a small part of the MagSafe and the phone stopped working so now what will be the cost to repair that thing ? plz reply asap
@KingIrvXL2 жыл бұрын
Ever figure it out?
@Victor-wn8hf2 жыл бұрын
Removed some of the magnets? Missing some magnets wont cause it to turn off. You might have ripped off one of the three copper wire connections of the wireless charging copper coil they are barely soldered and held down with glue. Check them and if one is disconnected scrape off the glue carefully and solder it back on.
@delisasadventures6609 Жыл бұрын
What do u charge to do this to the iPhone 13 Pro Max?
@stephenrimmer56292 жыл бұрын
Can I ask what is the copper coloured circle please ????
@TechMDYoutube2 жыл бұрын
wireless charging
@h10vlogs Жыл бұрын
@@TechMDKZbindoesn’t peeling the original glass and replacing it have any affect on wireless charging v?
@jooli812810 ай бұрын
@@h10vlogsno, it’s just copper
@user-dx8tk8uv2n10 ай бұрын
Where do you get the back replacement from
@levgordin737010 ай бұрын
Ebay
@irepairofpc31familykartrac51 Жыл бұрын
I only use 180c around the camera area and have never had an issue yet.
@billwoolmer8495 Жыл бұрын
Sorry your first screen broke, but it it good to know that the pros can break on reinstall
@richardwilliams16036 ай бұрын
Good video, keep up the great work!
@diyfixtool8302 жыл бұрын
This is very good!!!!thank you for your sharing!!
@gagfilmsful2 жыл бұрын
I was breaking the glass in the back by the camera now my screen won't turn on is there a reason why
@KingIrvXL2 жыл бұрын
Did you ever figure it out?
@MultiColouredVagina Жыл бұрын
You should remove the screen if you plan on doing this
@boelander4 ай бұрын
I got about halfway in, just removing the glass from the battery, and bricked it. I still see nothing I could have cut or broken. The 2 vertical magnets and a few circular magnets came off, but it was still running. I set it down, picked it up to look again, it was black. Grrr, I cannot see any open wires or anything, just nothing. Sh**
@boelander4 ай бұрын
Where is the motherboard on this? Mine is an iPhone 13 Pro
@Ogcoke3 ай бұрын
LOL at the end. good stuff bud
@vilmarosarivera22779 ай бұрын
Why are there magnets in there
@Propqueen Жыл бұрын
Came to see if I could replace my own. I have learned I CAN NOT! 😂 I can do screens all day but no to this!
@henriksvensson283611 ай бұрын
Yeah same here, back glass look so frikking hard and so much work.. Was thinking about buying a laser but its still alot of work and not safe
@TechMDYoutube2 жыл бұрын
Please support the channel by using my amazon links! For just the Back Glass & Recommended Parts click on the links below. 13 pro max Back GLASS : amzn.to/3n3J5xx ( Black ) amzn.to/3QMJhz1 ( Graphite ) amzn.to/39CGho6 ( Sierra Blue ) Back Screen Protector " 2 PACK " amzn.to/3QtmFTX 3+3 PACK Screen Protector & Cam Lens amzn.to/3QsQoMC 13 pro max Silicone Case : amzn.to/3y5LvBW Hot Air Rework Station : amzn.to/32PXsyX amzn.to/3EQca5T Glass Breaker Pen : amzn.to/3HCFe32 amzn.to/3spmyh2 Safety Glasses : amzn.to/3fbBmcV amzn.to/3fbBpp7 Fume Extractor : amzn.to/3eXzsMB amzn.to/3eOI1cG Glue Remover : amzn.to/3HFGUbR Syringes, Plastic Squeeze Bottles and Needle Tips : amzn.to/3pU3pDF Clamp : amzn.to/32OcNA4 Cold Glass Glue : amzn.to/3sVkqiH Heating pad: amzn.to/3mbIytW Heat Resistant Gloves amzn.to/3EsZdyW My blue mat to keep everyone organized: amzn.to/3BalS16 iFlex Opening Tool with Glue Card : amzn.to/35UC9h8 iPlastix Opening Tool with Glue Card : amzn.to/38FtzUH on of my favorite screw driver sets 2uul: amzn.to/3jsqkCz amzn.to/3CcoL2Y iseasmo w/ Kit (Has Screw driver too) amzn.to/35Za2O0 Tweezers: amzn.to/3B7yBlf T-7000 Water sealing glue: amzn.to/3EdzLxs Isopropyl Alcohol For Technical Use: amzn.to/3BqBU78 Need to get a part from a reliable quick source, you'll find a better price here then Amazon and the quality will be a lot better. Click on the link below. www.injuredgadgets.com/?acc=be9b6cec65c863e1b55538d2c7fcc9b0 • Visit our Website: tech-md.com • My email: dustin@techmd.bz • To mail in your phone, please contact us at 801-438-6028
@47DaveeXP2 жыл бұрын
Great thumbnail lol
@matstorkelsson5020 Жыл бұрын
Wonderful video! Big thanx from Sweden :-)
@JB-vo8bq Жыл бұрын
I like the hard style
@FloppyDorito Жыл бұрын
And this is less of a pain in the ass than doing the whole frame?
@DontHatemusiK Жыл бұрын
Lmao right?
@Alex_Justified Жыл бұрын
Also, your not supposed tape on the sides, you need to use pressure clips (think of chip bah closers) on the edges, tape will not hold it down on each side evenly.
@Dinthurt10 ай бұрын
Clearly a small bit ov old back glass left uncleaned off -middle of 3 lenses-.
@No-te9tr2 жыл бұрын
FACE ID WORK ?
@MultiColouredVagina Жыл бұрын
😂
@dwylhq874 Жыл бұрын
Our local iPhone repair place charges $300 for replacing back glass. Is that a reasonable price? 💭💸
@randooopik5019 Жыл бұрын
Thanks Män!
@jasonlowery9973 Жыл бұрын
They did that so you have to go get it fixed by them.
@MarangonRx10 ай бұрын
Mine broke in 1 week. Just removing the case… i will never buy a phone with Back glass anymore
@chauhanravi422 Жыл бұрын
Abee chuuuu. Camara ke niche glass fsa hai isliyee tut rhaa hai vo😂😂😂😂😂
@thomasmeier3905 Жыл бұрын
Wie Dämlich muss mann seine 😂😂😂
@johnnyr86032 жыл бұрын
So you want me to take apart my phone so I can replace the back of the phone? The last time I did this I ended up losing my whole phone and ended up having to buy a new one. So no thank you I’d rather pay someone $200 at least I know they know what they are doing and I don’t have to risk my phone again.
@MultiColouredVagina Жыл бұрын
This procedure is scary
@Alex_Justified Жыл бұрын
How about just stop buying these new garbage phones. Either buy a new one or toss the old one. I will never do another repair on these phones again. Apple can easily make the glass easily replaceable but they choose not too.
@crisspycritic2 ай бұрын
Never seen anyone heat near the cams. Been watching/studying back glass reolacements so i can start this and this the 1st guy to use a heat gun around the cameras. Maybe thats why he broke 1 before