iPhone 6 Battery Replacement Guide (How To) - ScandiTech

Tutorial / Walk-Through: Replace your iPhone 6 battery 15 minutes, a DIY video by Scandi Tech!
New, easier adhesive application process (@9.20): • iPhone 6 Battery Adhes...
Buy our replacement battery for iPhone 6 on Amazon.com:
With tools ($24.95): www.amazon.com/...
Battery only, no tools ($17.45): www.amazon.com/...
Our battery kit is now also available in UK!
With tools (£24.95): www.amazon.co.u...
Warning: The battery removal is a delicate process. If the battery is damaged, punctured or severely bent, it can combust!
NOTE:
In this video we show how to replace an iPhone 6 battery by removing the front assembly completely. This is not necessary but most first time technicians find it easier to work with both hands free. If you proceed by not removing the front assembly, it needs to be held securely at a 90 degree angle or the cables can get damaged or tear. This results in loss of LCD, touch or front camera functionality.
We urge everyone to also read our text/image instructions before attempting the battery replacement as it can get tricky and if not done correctly, there is a risk of damaging various components.
To see our full guide with detailed instructions, visit our website:
www.scandi.tech...
*****
We made this video to show everyone that it doesn't take an Apple-genius or a highly trained technician to remove and replace an iPhone 6 battery - anyone can do it!
A battery in an iPhone 6, or any smartphone for that matter, works like any other battery - it wears out with time. After about 300 cycles, i.e. 300 full charges and discharges, a significant drop in performance is noticeable. The older and more used the battery gets, the more obvious is the performance drop. In the end the phone can end up shutting down when the battery percentage drops below 10-20%. In this case a fresh, new battery brings the phone back to life.
In some cases the battery swells. This results in the glass/digitizer lifting from its frame. If the battery is very swollen, it's not uncommon that a gap is apparent between the glass and the metal back assembly. This problem can also be fixed by replacing the battery.
*****
Product info:
The iPhone 6 battery replacement kit linked in the description is a complete kit with battery, tools and instructions - everything you need to get the battery replacement done!
Our batteries are manually tested before they leaves our quality control center and they are packaged in a ESD safe bag before placed between two layers of protective foam. The tools are carefully chosen to make the battery replacement process as easy and smooth as possible. We've also chosen to include metal tweezers as it's a very handy tool and can be used both to open the phone as well as picking up screws and other small parts inside the phone.

[@thebettin]

Thank you so much!!! I am a 67 year old female that just changed her own iPhone battery without any problems! Great demonstration video, replacement battery and repair kit!

[@ScandiTech]

Congratulations on your new battery!

[@shahrukhkhan-ec8ie]

​@ScandiTech

[@shahrukhkhan-ec8ie]

​

[@shahrukhkhan-ec8ie]

​

[@francesandjerryengland7365]

This video really helped!!! Mental note: Listen to the video once right before doing the battery replacement. I listened to it plenty of times before I got the nerve to finally order a battery kit. Then I followed along while replacing it, forgetting all the small stuff I had watched a few weeks prior (I almost blew away my screws with the blow dryer!). I didn't order the kit in here because I didn't find it right away on amazon. This kit had a few more tools than the one I received. Mine was missing the black pry tool and the tweezers. If you're worried about removing the screen, trust me... it's worth it! And it's not as hard as it sounds in your head. There is a slight click when putting the strips back. The only sound I can compare it to is baby snaps on newborn clothes. Very very light click.

[@susansu9463]

Just replaced my battery successfully. I appreciate getting all the tools and supplies needed in an affordable, professional package that arrived quickly with detailed printed and video instructions and support from a responsive seller. I skipped removing the screen and just held the phone open below 90 degrees. I agree with previous comment to pull the tape straight down towards the home button instead of trying to work it around the corner and apply the tape to the battery first. Also, my new adhesive strips would not come off the blue backing. I messed up all the strips provided but I managed to get an inch or so of tape on the phone to stick the battery down. I noticed putting the screen back down the battery presses up a little, but no issues with performance and I keep it in a tough case so hopefully it won't become too much of an issue. We'll see how the battery performs.

[@trevorjameson3213]

You just saved me about 50 dollars! Great video and instructions. I ordered the kit from Amazon and changed the battery tonight, works great now!

[@shalanosara]

saved me $100

[@drreekk]

Hey I gotta an question, my Iphone battery is horrible like it goes down way to fast. Like it’ll be on 80% and then 5 mins later it’s on 5%. When u change the battery does it help with that?

[@kevinmuzikar2037]

Extremely helpful video. Follow these instructions and take your time and you should be setup for success. It took me about 40 minutes, but about 8 of those minutes were spent trying to get the screws back in after I was "complete". Two additional tips I would give: 1) Think about your hand positioning. Don't block your light source and don't make it overly difficult where your hand is bumping the front assembly when you're trying to unscrew the cover plate. 2) Pull straight with the tabs towards the bottom (charge port) of the phone instead of going around the sides. If you pull at a low angle, with constant but light pressure you might get lucky like I did and have both strips come off without ripping. Good luck!

[@NJ_squad]

5i

[@davidprice2861]

This is one of the best guides I have seen on the subject, Excellent narration especially regarding tips, techniques and explanations for the inexperienced. (short, sharp, but complete). Thanks..

[@DongusEddy]

One of the most complete and organized instructional videos I've seen in years--good job!

[@ScandiTech]

Hi there, Thanks for watching. We do try to make it as clear and accurate as possible. -John

[@NaseemShah-zo8tx]

M

[@sharmzm30]

I got very stuck, do not pull the strips around the corner, pull them straight down. it snapped off and I had to use brute force to pry the battery off! kitchen spatula came in very handy. Apart from this very informative video, thanks!!!

[@sontruong4316]

Thank you so much for your detail instruction. I watched 3 videos on replacing I phone 6 battery and yours was the most helpful! Thanks again and keep up the good work!!!

[@gilesmf]

I watched several videos to replace the battery and this one is the best overall. All videos insisted that you remove the screen. This one gave me the knowledge to remove the battery and replace it (successfully) without removing the five connectors attached to the screen. I used several books to ensure the screen did not tilt more than 60 degrees. It is somewhat tricky but with patience is not overly difficult. Appreciated, thanks.

[@Sunnyat189]

Just changed my daughters phone battery! Her phone wouldn't charge and was told it needed a new 'motherboard' at a cost of £150 at a phone shop in Queensway W2. Was a bit sceptical and took a chance with a new battery from Amazon. Battery was a bit difficult to remove and had to use a flat head screwdriver to really pop the thing out. Anyway phone works perfectly and it only cost me £15! Brilliant video and really pleased with myself!!

[@katl9270]

I just replaced the battery in my daughter's phone and it was very simple, thank you so much for the detailed instructions.

[@ScandiTech]

Hi Kat, Congratulations! I'm sure your daughter will love it. -John

[@elenitataglucop3797]

Will it make the phone restore everything?

[@rolandweimer3218]

Thank you very good for that detailed exact working. This helps a lot. One note: The adhesive strip for the battery has straightened up in the last step before closing the display. It will now probably press or stick against the display.

[@MeccaDawn666]

Thank u so much this helped me replace the battery easily with your instructions

[@ginzero]

Good instructions. Removing the old battery was the hardest part the adhesive was really tough even after heating it up.

[@r-reyh8757]

Gino Delizo lol exactly..

[@emmanuelayiku8381]

Thankkkkkk youuuu soooo much for your help. I was honestly scared to do this, but your instructions were so easy to follow. From the bottom of my heart I appreciate you.

[@Leonbonzai]

You made it appear so easy and clear; unbelievable. Congratulations

[@rihanna9120]

*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

[@theticoboy]

Worked like a charm. We didn’t have to disconnect the touch screen. I messed up putting on the new adhesive. When I pushed the tab 90 degrees it flipped over and stuck to the adhesive a little. I also found it easier connecting the battery first and then placing it onto the adhesive. Great video. Thanks

[@alistbr]

I am useless at this type of thing but instructions talk you through step by step and no issues. Also worth adding that I removed the top section which was described as tricky, but it was all quite straight forward.

[@HavenCraftHomes]

I just completed it in about 15 minutes. Great video, great tools. Very impressed.

[@ScandiTech]

Nice work!

[@atyketu3794]

Thank you for sharing this video. I just replace the battarie. Greeting from ALBANIA 🇦🇱

[@drivers1959]

one of the best iphone 6 vids...lots of helpful tips n reminders

[@nothin2u360]

Got it done. Small screws are just a bummer. Glued battery was a pain. Your instructions are excellent though !! Thank you very much !!

[@ScandiTech]

Glad to hear! Yeah the screws are tiny. It can even be blown away by just a breath.

[@svendholme3627]

One of the best and most detailed steps for replacing a battery in an iPhone 6 I have seen. The warning to replace the screws in EXACTLY the same place they were removed from is very important. The screws vary in length but the differences are so slight you might not notice it, put a long screw in where a short screw is required and a good circuit board can be turned into non-repairable junk. Attention to detail is very important.

[@marioatoyan6183]

I just replaced the battery in my iphone 6. Nice easy directions. The hardest part was connecting the new battery, but patience and 5 minutes later it was all done. My phone is running like new! Thanks.

[@ScandiTech]

Glad it helped

[@alexhydrummer]

Perfect. Thank you man. Very helpful. Took me about 45 minutes. Would have been about 30 minutes, this was because once I reattached the front screen I must've not clicked one of the bands into place all the way. Once I tested turning it on, the screen was all whacked out. So I went back in, reconnected all the bands and it worked perfectly. Great walk through. And I agree, tearing the adhesive to the side is easier regardless of what the other commenters are saying.

[@kymmoore853]

Had a lot concerns about doing this, if I’m honest, as it obviously means dismantling your phone and it can quite worrying. Excellent instructional video - took about 20 minutes.

[@ProPete.]

Great video. I bought your pack with battery, screw drivers and tweezers and did the battery swap. Took about 45 minutes thanks to the very thorough instructions. I have never worked on something this delicate before but it wasn't terribly complicated. You have a great product! Thank you.

[@edcheng1536]

Just completed my battery replacement using the ScandiTech kit and this video is very helpful. However, I found the instructions for putting on the new adhesive strips to be incorrect. After peeling off the blue film, the strips should be placed on the back of the new battery, then folded up around the top at the bottom of the battery. Then the red film can be removed and the battery placed into the phone. Doing it the way the video shows places the little adhesive strips that are meant to hold the tabs down on the top on the wrong side.

[@ScandiTech]

Hello Ed, You're absolutely right. We've been toying around with different ways to install the adhesive and for first time technicians it's definitely easier to put the battery right on to the battery. We've made a quick guide showing this process: kzbin.info/www/bejne/eaO3da2he5uqrMk Thank you for your comment and hope this helps! Regards, ScandiTech

[@steventaylor1990]

How does your battery perform these days? Considering ordering a kit off amazon

[@rlawrence2]

@@ScandiTech also, it makes sense to plug in the battery first before positioning it down on the adhesive. Then unplug it for safety when completing the install of the screen. No I haven't done it yet; but I am an observant anal engineer ready to order from you or someone. I like how you test the battery and also leave the battery install cable for last. Smart advice.

[@sunniecam]

Thanks for posting this. I could not have done this without your video. Got it right the first time following your instructions. Kudos. To anyone who does this, get a strong set of magnifying glasses since the screws are tiny.

[@ScandiTech]

Thanks!

[@uprisingmuffincompany3420]

Nice job, this worked out perfectly for me. I did not remove the screen and was able to change the battery. It took me about 45 minutes to do the job. Battery is working perfectly. Thanks. ScandiTech.

[@NicleT]

Just done it and it worked well. The only thing is that I had some other components that obviously doesn’t correspond to the iPhone 6 (yes, it’s the *iPhone 6 ONLY* kit that I have.) The over stock is like an interior transparent protection thing with two holes (one round and one oval) that doesn’t go anywhere in any iPhone I recall). Anyway, the 2600 mAh is PERFECT! Thank you.

[@jimandbeth9171]

Excellent! I watched a number of these videos and this was the best, by far!

[@NickLuangrath61]

Thank you for your very detail video, I will try it on my old iphone 6 which keeps on running out of battery while using it. I already have iPhone 10 now but sometime need to go back to use my second phone for something.

[@billykoons5435]

I started my battery on fire! A good warning would be to state "never use a metal pry tool to get the battery out" It arced across to the metal after a slight puncture of the soft battery shell. Luckily I was able to dump the flaming battery out before any damage was done.

[@tbonez5906]

Nice job very thorough and easy to learn because your timing was done very well, easy for people to follow along and understand every step.

[@Victor-qk7mw]

Very very useful, tho i failed with the screws and messed up my touch and LCD screen, but learnt a lot. Thanks!

[@dogrokket]

Did it. One of the better tuts. When done, my flashlight/back camera wasn't working. Opened it back up and whoops. I had inadvertently unplugged the camera. Easy to do by accident. It's the 5th connector.

[@pehyne]

Just repaired my phone! It was a little touch and go there when the adhesive strips both broke so i had to pry the battery out with the tweezers and then i almost lost a screw when putting everything back together, but in the end everything worked out perfectly I'm so happy

[@pehyne]

I will also never do that again it was too much work

[@ScandiTech]

Hi there, The process can get really troublesome because of the adhesives. When the adhesives break, try to soften it first by applying heat before prying the battery out. It can be much easier if the adhesive is softened. And yes, the screws are tiny and can be easily lost. It can also be blown by our own breath or any gust of wind. Which is why it is recommended to secure the screws as these are also sized differently. Overall, I'm glad to know that the replacement was a success. Cheers!

[@emilygiannattasio3255]

Great directions. The battery I purchased did not have a magnetic screwdriver. OMG took forever to replace screws. Mission accomplished! Tx

[@saqib063]

This is definitely one of the best video regarding battery change.

[@musgrada]

This was a very helpful video, and your product on amazon was very reasonable. I just fixed my iPhone 6 for $25 when it wouldn't hold a charge. Thanks!!!

[@thedigitalemotion]

Just repaired my girlfriends phone! Guess I'm getting lucky this weekend! Thanks!!

[@Larry-tl6vw]

getting lucky is great….!!!! Lol

[@scattered_rain]

Don’t overwhelm !!

[@benji-gm6vm]

Omg same

[@LandersWorkshop]

You should be getting lucky regardless, but good points scored.

[@thedigitalemotion]

@@LandersWorkshop This was two years ago lol

[@chewpaeng12]

On all the millions of video here, your the more detail on how to remove the battery which is the hardest part. Thank you

[@slimslim-yt1cz]

Awesome Video!! I bought the battery along with the kit. You video to the T. is awesome, very tediious work with the screws, especially for someone with eye problems. My neck is killing me LOL. Def. worth the price rather then constantly paying apple and kiosks for their products and services. Thanks Guy!!

[@blanko9808]

I'm a kid and I just replaced my battery thanks to you you saved me about 30 dollars

[@lucio5538]

wait... 30$?

[@blanko9808]

Idk but it did save me a lot cause the battery I would have had to pay for aswell

[@nicholasfriar8612]

My battery has lost its mind, looked this up to see how easy it was to replace, and after watching your video, I’m definitely doing it myself. Super informative, and I’ll probably save a lot of money this way

[@ScandiTech]

Great to hear!

[@quavonhall7050]

Did it work 👀?

[@nicholasfriar8612]

@@quavonhall7050 yeah for a while. Heads up, lots of little screws that are easy to lose. Better than buying a new phone for sure, or paying someone to do it

[@TexasScout]

I just watched the replacement vid on ifixit, all she did to remove the adhesive was to pull straight back from the tabs, then work them around the side of the battery slowly pulling all the time. Just like removing a "Command Strip".

[@thrivingwithtim]

Great Video. Best one I've seen for doing this! Thanks!

[@zolalloyd46]

Superb and highly informative video. No background noise, distracting graphics or unnecessary adlibbing. Just straight to the point from A to Z, and it worked perfectly for me. If there was one thing I would add is to use plastic tweezers or pry tools when trying to remove the old battery. Usually on the battery there's a warning about the risk of explosion if the battery is accidentally pierced, especially by a metallic tool. I also wore safety goggles for removing the battery just as an extra precaution. You don't have to wear goggles if you don't want to. But there is always a risk when poking around trying to remove something as potentially dangerous as this. Thanks so much

[@freireeduardo]

Just did my battery change on my iPhone. This video is great! The whole process went through without hassle and I was able to successfully change the battery out. Bought the battery and battery replacement kit from Skandi Tech on Amazon.com. Now let's wait and see what the battery life on the new battery is like. So far, so good. I recommend this seller!

[@rockgird]

how the battery life is for your phone ?

[@freireeduardo]

Yes. The battery still works fine! Offcourse the battery life decreased a little. It's been months of using it. But it still lasts fine. I would say it is a very good option if you don't want to buy a new phone. I'm still using my iPhone 6 and have no plans to change it for a new one for now.

[@f.ernandogabriel]

e aí, cara! vi que você também é brasileiro.. então, comprei minha bateria scanditech e tô esperando chegar. me diz, a tua bateria, após esse tempo todo, dura bastante ainda?

[@freireeduardo]

Fernando Gabriel a bateria Ainda dura direitinho sim. Não mais a mesma coisa que logo depois que troquei, mas isso eh normal. Alguns hábitos que pode. Ajudar a fazer ela durar mais tempo: não carregar até 100%, não deixar abaixo de 40% e não deixar carregando a noite toda enquanto vc dorme. Vc comprou o kit de ferramentas pra fazer a troca também né?

[@f.ernandogabriel]

sim, sim! você diria que essa bateria Scanditech tem a vida similar a original que veio no iPhone assim que comprou? eu comprei a minha no mercadolivre devido a loja no amazon não estar mais disponível.. paguei R$140 na minha no mercadolivre, só tinha uma unidade para cada iphone, e a vendedora não tinha muitas reclamações, então acho que a minha é original scanditech..

[@itsmemai4528]

It's already 2021 but this video is still very helpful. Thanks to this in depth tutorial I was able to successfully fix my old phone.

[@tomneubauer924]

Did not remove screen, had wife hold screen at 90 degree angle to phone. Heated back with hair dryer, both tabs broke off on adhesive; maybe did not heat up enough . Had to really heat back of phone up and pry battery up bending old battery. Can't understand why such strong adhesive. As stated in video, keep screws separated and away from work area because hair dryer will blow them and you will spend more time looking for them . I had no problem. Excellent video.

[@jaredticer6255]

Gave it a like but i do wish there was more on the blow dry your phone part, lmao. I didn't have a heat gun and just wasn't really sure how long to heat it up, how close to hold it to the phone and so on. I managed to get the job done and phone worked perfect after, just would have spent ab 30mins less with a little more instruction regarding the adhesives. Thanks a lot for the help though :) Now i can hopefully get a little money for this phone to go toward the upgrade :D

[@NomadicDmitry]

The heating part is really something that could be avoided, I guess? I've just completed the replacement of iPhone 8 battery and I just pulled the tabs and then used a credit card to lift it up. Worked fine. I assume that iPhone 6 battery replacement process was not much more complex, but that's just a guess.

[@ScandiTech]

There are instances where the battery adhesives are just stuck in there. Loosening it really helps.

[@NomadicDmitry]

@@ScandiTech Got it. I still like heating is not always a good suggestion here. It might help or it might damage stuff

[@marqj301]

Great video. My only nitpick was the adhesive under the battery. It took me quite a while to get it off. I ultimately had to force the battery out because the adhesive kept breaking and never could pull them out with ease. Other than that, everything else went smoothly.

[@johnhayes1641]

Everything went exactly according to the video. My only suggestion is that it was hard to tell which side of the new adhesive strips faced down. We reversed it accidentally so the ends of the strips did not stick to the phone, although this did not present a problem. I wonder if it would be easier to apply the adhesive strips to the battery first. (Apologies. I see this same comment was made below). Thanks for a great product and excellent support!

[@ScandiTech]

Hello John, Thanks for the feedback. Yes, indeed. The part showing the application of the adhesive is not very clear. We made a new video for this process alone. Please see here: kzbin.info/www/bejne/eaO3da2he5uqrMk This should be much clearer :-). Regards, ScandiTech

[@TechBrosWilkes]

This is the best video on the battery removal process. Great job!

[@alexanderwiand6997]

ComputerTek Repair Services I disagree. The ifixit one is better quality.

[@heychas]

Great Video! I found this very helpful. I've changed two batteries now. Thanks!

[@nickb3746]

Inside of my iPhone 6 Plus (it was one of the first) was a little different re screws on plates but your video was an immense help - thanks

[@drreekk]

My battery will be on 80% and then 5 mins later will be on 6%. Does changing the battery help?

[@gordonsmith4576]

Great video, guys. However, in my case the glue tabs broke off at the very start, and I think my leverage and use of hairdryer must have affected something, as my phone as that ghosting, and it doesn’t respond to the finger control. But why does Apple have to glue the battery in place, where Samsung doesn’t? Back to my old Samsung then!

[@scottoakley1135]

Excellent, concise and accurate step-by-step video. HOWEVER, for us older folk, I would NOT recommend attempting this - the screws are microscopic. Picture small crumbs. Highly recommend leaving to someone younger. Otherwise, great video.

[@radovanovicboki]

Hi Scandi Tech! First of all, i want to thank you so much!!! Your battery is very high quality, cheap and the tools u guys provide makes the job super easy! Even the caveman can do it. :) Now my iPhone can hold about 9 days in standby mode and when i play games or watch HD movies, it can hold up to 17 hours... ;) My old battery was 3 years old and had about 750 charging cycles and the phone was shutting down when it reaches about 25 - 30%, which was driving me nuts! At best it can hold about 5 - 7 hours on high use and about 3 days on the standby. Yeah i know not bad for the 3 year old battery, but i know how to charge my batteries, that's why they last a long time... :) Anyways i order your "Battery kit" with all the tools included and it took me about 25 - 30 minutes to replace the battery. The glue on the battery was super easy to remove, because what i did is pull the tape a little bit and then use my hair dryer to heat up the glue a little more and little by little, both tapes came off very easy and the battery just popped out, No force necessary. I did remove the screen, becuse it makes the job much easier and u don't have to worry damaging any connections that goes to the screen. Me as the computer administrator, that fixes all kinds of computer and the cell phones. Highly recommend this seller and his products. Good job and keep up the good work! ;) Cheers

[@DickySadikin]

Thank you, I just replaced my old iPhone 6 battery. Very helpful

[@anitaschvitz9749]

I like folding duct tape over on itself (so it's a sticky circle) stick it and flatten it to the table, then you can stick the screws to it in the right pattern and they stay where you put them real good. No fear of coughing, sneezing or bumping them off.

[@ScandiTech]

A perfect suggestion!

[@slavrawicz]

Really great video. All the necessities and no baloney. Helped me just right!

[@papagrouch8416]

Excellent tutorial and talk-through, thank you! Everything went exactly as you described. Bada boop, bada bing! Even with a heat gun, the battery adhesive did not release or pull out as on video so that was interesting. Operative word, as you said: "Patience." Well done!

[@Rick-wn5oh]

I would recommend finding a small magnet and sticking it to your screwdriver. Now your screwdrivers magnetic. Take the magnet off and it's no longer magnetic. I always keep a few magnets of various sizes sticking to my fridge. It's also handy when you lose a small screw on the floor.

[@ScandiTech]

Hi Richard, Very good suggestion! -John

[@hjsvideo]

This is a helpful video but I think that the adhesive strips should be placed on the battery so when the adhesive is folded over, it sticks to the battery like the original strips were installed.

[@rudebwoy8]

This video helped my battery swap out to go smoothly. Even managed to do it easily without needing to remove the screen from the back-plate.

[@shalanosara]

I thought this video was incredibly helpful and allowed me to successfully change my battery here in a country where none are available even if I wanted to pay someone to do it. However, I would like to add a small comment. When I got to the point of sticking down the tape I erred with the correct side up. This is almost a non-issue but the ":grab tabs" at the end of the tape weren't correct and there was a small amount of "sticky" facing up, not down which would allow for the tabs to lay down and stick to the battery. It worked any way but I thought it was worth mentioning.

[@ScandiTech]

Hi Karl, Awesome! We love feedback as it helps us improve. We'll take your feedback into serious consideration. Cheers!

[@kitt787]

Is the adhesive necessary

[@chrisgraham9203]

Very nice and great care taken when replacing the battery. I would want you to replace the battery on my phone!

[@22hutchingsc]

Great kit. Video was instructive, but has you incorrectly place the sticky strips on the phone, not the battery. It then says, "...it might not stick, that's ok." It doesn't stick because it is upside down! I found that out too late. Also, the screen gasket is completely ignored. Had to watch some other vids to find out what to do there, then go back, take it all apart again and put that on. Wish I had watched some other videos as well beforehand!

[@betosgarage]

Same here !!

[@michaeljones8905]

Fantastic easy to follow video, with very clear and concise instructions.

[@shaisumett]

HAH! Thank you so much for this video. Although I didn't use your product (sorry), I managed to revive my niece's iPhone 6. Thank you so much!

[@shannonaust7355]

Thank you so much for your video! there was a scaring second there when the adhesive decided to bunch together in places but i was done with this (i was getting very frustated) so i put the strips in anyways and it seemed to work fine

[@trevorjameson3213]

I installed the new battery without those ultra sticky tape strips. No need for those anyway, the battery fits snug on it's own. Plus, the old phones years ago didn't have the batteries taped in, there is no need.

[@charlesfick729]

What problems? this was a great video and it's as easy as it shows. I myself had the end of the old glue strip break but was able to grab just enough with the tweezers to get a hold of it and it came right out. Stuff is wierd, it's rubber.....

[@stephenripcord3987]

What do i do with this blue waterproof adhesive sheet thing?

[@K31swiss]

It worked but I suggest having women and kids leave the room before attempting removal of the battery. The vernacular of the gutter had to be employed.

[@philcutler1123]

If your suction cup sucks like mine did, use a Garmin windshield suction cup mount, the larger handle gives you or your helper something more to hold on to.

[@LandersWorkshop]

@@philcutler1123 Well said, I wondered if one of those things would gloop it on off easier.

[@vitinvaldez4927]

I mess up my iPad cause my daughter and wife was around me I throw the iPad in garbage hahah

[@73cidalia]

Well, I’m a woman and the household’s battery changer.

[@saulcortez2595]

Almost blew my self up doing it bc I messed up and the battery blew up

[@multitaskperu810]

Excellent video, i just changed my iphone´s battery myself and its working perfectly, hope my 3 year-old phone will last another 2 years hehe.

[@cocoabiscuits]

success!! had an issue with adhesives but heated up until i was able to remove them Thank you!

[@blegros]

I used a guitar trigger capo to hold the screen and it worked great

[@titoaz2007]

just replace my iphone 6 battery ,awesome video very helpful ,thank you .

[@TrueBlueBoogie]

Thank you for this beautifully narrated, shot, and transcribed how-to video! You’re an excellent communicator! Do you have instructions for an iPhone7 (Small versión) battery removal?

[@ScandiTech]

Hi there, Thanks! We try to make sure that everybody understands the process regardless the technical level. Here is our iPhone7 guide: kzbin.info/www/bejne/nmitlaF9gp2aja8 Cheers!

[@starskygirl9293]

can you do a video on battery replacement for iPhone 14?

[@ahmadagha8141]

i just finished changing my iPhone 6 battery ....... Thanks a lot for this Video it helped me to change it easily with out any damages

[@loveguitarlicks3066]

Just changed mine and saved so much money and time doing it myself.... easy..thx

[@ngarloch]

Thanks for the video... I changed the battery in my Iphone 5 a couple of years ago (when the phone was about 18 months old... which is the same story with this 6... assuming that's when the batteries go to shit) so I had an idea how to go about it.... FYI guys DO NOT pry too hard trying to free the battery!!! I poked through the coating of the battery caused it to arc to itself two separate times.... when I finally pulled the battery up about half of its protective layer stayed glued to the phone case... so please be careful! Luckily my phone still works just fine with the new battery. Took me about 20 minutes to complete the swap, and my phone had never been apart before tonight.

[@tomgreto]

I guess nobody's ever heard of 3M Command Adhesive strips.

[@LloydieGirl33]

Do you need to charge it once you change it or wait for it to go at least below 10% to charge it?

[@jstanich]

The battery works great. The tools are really nice and worked very well. Great product! However, the only issue I had was the new battery connector was not bent exactly as it needs to be to fit in properly and I had to figure out how to bend it so it would fit. Once I figured it out it was not a problem but there was nothing in the instruction about this. Anyone who does want to change their iPhone battery them self should note that getting the old battery out is not easy since it is glued in and unless you have decent mechanical skills you might ruin your phone. If you are under the impression that this is as easy as popping out the old battery and popping in a new one you may want to take you phone to the Apple store and pay for the battery replacement.

[@ScandiTech]

Hello Jon, I'm happy to hear that you managed to replace your battery. I see. In most cases, the battery does arrive with its connector in the right angle. However, during shipping and warehouse handling the battery tend to move about in the package and because of this, the connector might now always have that perfect 90 degree angle. Either way, I'm glad you figured it out on your own. You are absolutely correct. The battery replacement is not a risk free process. We try to warn about this wherever it's appropriate. We also recommend all potential customers to read and watch our guide before considering taking on a project like this. 95% of our customers manage to replace their batteries without any issues, but as you said, this is not for everyone. Regards, ScandiTech

[@roba4292]

Great video and instructions. I followed each step and had no issues! Thanks!!

[@gtdr9300]

Thank you. I followed your video bought the battery from Amazon as your video showed. I was able to change the battery of my iPhone it works fine.

[@ScandiTech]

Excellent!

[@MrZicku]

I see the amazon information specifies that the battery is not designed for Iphone 6s. Why is this? Do you sell this kit with a battery designed for Iphone 6s?

[@ScandiTech]

Hi there, The vid shoes the battery replacement procedure for the iP6. If you are looking for the iP6S, please check out this link www.amazon.com/dp/B07X4WYXVW The iP6S guide can also be found here kzbin.info/www/bejne/pqWxeJqqrKegmdU Thanks!

[@AD4K69-a]

Thanks, but i messed up on those strips tho 😅

[@felipechavez1549]

Thanks very well done the way you explain with details and precautions and slow I was wondering where you get the box kits?👍🏼🙏🏼🎼😎

[@ScandiTech]

Glad you like them!

[@brandinop6379]

I know this video is pretty old now, but i successfully replaced my phone battery! Great video, I didn’t remove screen to avoid the potential of losing anything. Battery works great and my iPhone 6 should hopefully last just one more year😂