iPhone X keeps restarting randomly on 2-3 Minute Solution 2021.

[@santinomagnolia4971]

Thank you for this video, because of you, I've solved my issue. New subscriber now!

[@thegsmsolution1]

Welcome!Thanks for subscribing.Keep supporting.

[@scottyt8468]

Hey bro please how did you solve it am facing same issue with my x

[@kelsycampbell4947]

hey recently came across your video and i have the same exact problem but my phone isnt charging. it has not passed 3%

[@Pluuton]

Same for me! Found a solution??? It's also very slow and does not charge unless I shut the phone down conpletely

[@iqrah3309]

Same problem with mine.. i think you should replace the battery

[@Abdullahsiddiq832]

@@iqrah3309 noo bro nooo ive change 2 times nothing happens same problem

[@jameskelechi3668]

Powerful solutions thanks 🙏 my iPhone 11 was rebooting every 2-3 minutes, I did just dat, and problem solved!!! Thanks 🙏 New Subscriber!!!

[@thegsmsolution1]

Welcome and thanks for subscribing.

[@saunaksutradhar8257]

Hey my iPhone 11 is also showing same issue as yours. Hopefully this I'll be able to solve this through this video

[@sheezu4099]

my iphone 11 same problem please solution

[@huyhuynh4425]

Absolute beast. Thanks a lot brother. Saved me a new logic board.

[@thegsmsolution1]

You're welcome!

[@CanberkSezer]

if the restart problem still occurs after detaching all the flex, it can refer to a hardware issue, but if the panic log hasn't changed and if it still says something refer to the mic, so you need to try to attach a new charging flex, is it correct?

[@thegsmsolution1]

Yep brother.

[@mortadaadem6841]

Hello my brothers, I work in the field of maintenance and I used to change the back pack using a laser for the iPhone without problems, but recently there was a problem of restarting more than once and I discovered that the problem occurs from the flash cable and it should not be changed to the original quality, but I need to know the cause of this problem Basically to avoid it

[@thegsmsolution1]

The heat produced by laser makes flex weak and got a problem on gyroscope section on flex. The better process is to remove Pcb and flex then do.

[@aashikxetri9330]

@@thegsmsolution1 so how can we fixed it ? I also change back and get same problem.any idea ? I need help

[@takudzwanigelchinho2756]

what causes the flex cables to go bad, my phone is having the similar problem and it just randomly started restarting itself every 2mins 44 seconds.

[@officialaxeonthebeatbw]

did u managed to fix yo phone?

[@nicolemiller4602]

mine is the exact same time

[@pimpslapahoe]

Same here

[@agohnarrative]

Hello please I need your help My XR says "enable pci port - port enable failed" so what can be the problem please and thank you

[@georgeabaidoo4530]

Hello please can you help me. My iphone XS Max restarts when the display goes off. As a result i have put my display on “always on”. Besides if i play music in background and put off display, it wont restart. So it only restarts if the screen is off and no music in background. What is the cause of this? Thanks.

[@thegsmsolution1]

Send me the LOG.

[@georgeabaidoo4530]

@@thegsmsolution1 from research i did, i found out that i2c0 errors are caused by charging port assembly flex cable, power flex cable or the intergrated circuit.

[@georgeabaidoo4530]

@@thegsmsolution1 the panic log , i thought i sent it earlier. Im sending it again. "panicString" : "panic(cpu 0 caller 0xfffffff027a07788): \"i2c0::_checkInterrupts error interrupt; last read status 10810100 int shadow 00990100 xfer 80000000 fifo 00000003 for device ad5860\" Debugger message: panic Memory ID: 0x6 OS release type: User OS version: 18F72 Kernel version: Darwin Kernel Version 20.5.0: Sat May 8 02:21:46 PDT 2021; root:xnu-7195.122.1~4\/RELEASE_ARM64_T8020 Kernel UUID: D26AEA6F-F80E-326B-939C-DF10D884B02B iBoot version: iBoot-6723.120.36 secure boot?: YES Paniclog version: 13 Kernel slide: 0x000000001f29c000 Kernel text base: 0xfffffff0262a0000 mach_absolute_time: 0xfa4d702afb Epoch Time: sec usec Boot : 0x613aa8d7 0x0009505c Sleep : 0x00000000 0x00000000 Wake : 0x00000000 0x00000000 Calendar: 0x613b57c6 0x0005c342 Panicked task 0xffffffe199ae8670: 59351 pages, 324 threads: pid 0: kernel_task Panicked thread: 0xffffffe199c25740, backtrace: 0xffffffe94869b730, tid: 334 \t\t lr: 0xfffffff026cebb34 fp: 0xffffffe94869b780 \t\t lr: 0xfffffff026ceb948 fp: 0xffffffe94869b7f0 \t\t lr: 0xfffffff026e315b8 fp: 0xffffffe94869b810 \t\t lr: 0xfffffff026e23a68 fp: 0xffffffe94869b8c0 \t\t lr: 0xfffffff02740a7a8 fp: 0xffffffe94869b8d0 \t\t lr: 0xfffffff026ceb630 fp: 0xffffffe94869bc50 \t\t lr: 0xfffffff026ceb630 fp: 0xffffffe94869bcb0 \t\t lr: 0xfffffff028b1394c fp: 0xffffffe94869bcd0 \t\t lr: 0xfffffff027a07788 fp: 0xffffffe94869bd50 \t\t lr: 0xfffffff027a0663c fp: 0xffffffe94869bde0 \t\t lr: 0xfffffff027a07210 fp: 0xffffffe94869be10 \t\t lr: 0xfffffff027a05914 fp: 0xffffffe94869be30 \t\t lr: 0xfffffff027332274 fp: 0xffffffe94869be80 \t\t lr: 0xfffffff02732e69c fp: 0xffffffe94869bec0 \t\t lr: 0xfffffff02732f0b4 fp: 0xffffffe94869bf00 \t\t lr: 0xfffffff0274107a0 fp: 0x0000000000000000 ",

[@DewaMadeYudaAndika]

Same problem with me, how to fix it?

[@yipmann438]

How you fixed it?

[@farhanshahriar122]

Do i need the original charging ribbon to solve the prblm???

[@trishapareja5120]

Hello is this applicable for iphone 6plus? my phone keeps restarting

[@dranrebbt1375]

Hi Good day! I have an iphone xr where it has something wrong with my earpiece and creates buzzing sounds. With this issue, my phone starts to restart by itself. I've tried to change my audio ic but after a months of using, the buzzing sounds just appeared again & my phone's restarting. What do you think is the main problem? Thank you & hoping that you will answer this.

[@thegsmsolution1]

You are a technician and replace audio ic or other technician replace that IC.

[@dranrebbt1375]

@@thegsmsolution1 technician replaced it.

[@YaseenAnwar9719]

Sir at the end you said that you have to boot the version of flex and sync, how to do that? Can you help me out

[@thegsmsolution1]

Use original flex.

[@connielaguardia8538]

My phone was automatically shut down and on again but my battery was in good condition and my phone was getting hot. Can i ask if what the problem in my phone because im affraid if i will be change my battery and they will not solve my phone problema. Please help me

[@thegsmsolution1]

Only change battery is not an ultimate solution.If your iPhone is restart see the panic log that i mention on the videos.

[@oseghaleoyugbo8458]

please what did you do to fix yours

[@rc4354]

hi. I have the same issue. but on my panic log it says; " SD: 0 Missing sensor(s)". does that mean it is not the charging flex cable problem?

[@rc4354]

my log says ""panicString" : "panic(cpu 1 caller 0xfffffff022f53670): userspace watchdog timeout: no successful checkins from com.apple.thermalmonitord since wake service returned not alive with context : is_alive_func returned unhealthy : current ffffffe, mask 1ffffff, expected 1ffffff. EC: 1 EH: 3758097110 3758097110 SD: 0 Missing sensor(s): TG0B service: com.apple.backboardd, total successful checkins since wake (180 seconds ago):" many thanks

[@thegsmsolution1]

You try with only remove flex or change other and check.This issues can also from power switch flex side check it out.

[@LTG12]

@@rc4354 mine says the same thing what was the solution

[@adedoyinakinbi8013]

@@thegsmsolution1 mine says SD:1 BC: 1 missing sensor: mic 2

[@karanvirkohli]

Hello mate, tried everything! It still restarts! (I have the same error log) My repair guy too can’t find any solution! Do you think something else might work?

[@asmaalmansoori7269]

Do you try his solution? And didn’t work?! Because i have same problem

[@karanvirkohli]

@@asmaalmansoori7269 yeah mate, tried everything! Nothing works.

[@karanvirkohli]

I have the same issue, it shows panic(cpu1) rest is same, is it the same issue? My battery health is 78%, should I get my battery replaced too along with charging port replacement, if it the same issue?

[@thegsmsolution1]

Can you send me full Log.

[@karanvirkohli]

@@thegsmsolution1 yes "Panicstring": panic(cpu 1 caller 0xfffffff0ba51df4) userspace watchdog timeout: no successful checkins from com.apple.thermalmonitord since load service returned not alive with context: is_alive_func returned unheAlthy: current 73fffff, mask 67ffffff, expected 67ffffff. SD:1 BC1 missing sensor(s): mic1, service: com.apple.backboard, total successful checkins since load (180 seconds ago) :

[@thegsmsolution1]

Remove ear speaker flex or power switch flex and try and ensure that the charging flex is the original one.

[@karanvirkohli]

@@thegsmsolution1 thanks brother, I will try it tomorrow! Is there a need for battery change? It’s at 78% right now.

[@thegsmsolution1]

Below 80% Health of battery is not good for performance but you can use it no problem. First fix the restart problem then later you can change it.

[@muhammedfatiharmagan5110]

I have the same problem and panic log mic2 error, will the problem be fixed if I change the power flex for sure?

[@MASK_MAN2209]

Thik hua ?

[@LuciferPlayzzz]

This problem has happened with me in my SE 2020.The apple executive told me to update to the latest iOS which did not resolve the issue.Then he told me to restore the phone which also went in vain. Please help.

[@thegsmsolution1]

If there are any hardware issues how is it fixed with upgrade firmware.

[@xianking5635]

My iPhone 11 has this kind of issue i dont know what to do well this video might help me thank you

[@thegsmsolution1]

Send me log that i mention on the video then i will guide you by seeing the log.

[@mallarkarmakar8027]

My iphone 11 keeps restating after 3-4 minutes. After restating phone slightly heat up and 1-2 % battery down. Battery health 90%

[@nandujaraj2062]

Bro plz help bro my i phone x is the same issue and the speakers is not working what I just changed the charging flex the problem is not solved bro

[@jamesakpom3680]

Hi if I use a new fonctionnal copy charging flex and not an original it can be a problem?

[@thegsmsolution1]

Most have issues so i mentioned.Not all some of them is good.

[@aashikxetri9330]

SD: 1 BC: 1 Missing sensor(s): Prs0 Inservice: backboardd, this means ?

[@asmaalmansoori7269]

I have this problem and I checked the battery with new one and screen and still not fixed can you help me please abd this is the panic note

[@Mubeen.khan451]

Hello sir I have changed the charging flex cable but still face the Problem what might be the issue. Will you please help me. Thanks

[@thegsmsolution1]

Did you see all the video carefully on which i mention panic string.Check it then you got an answer.

[@invictus.it.86]

i have tried to change flex from a repair shop here in taiwan, before they apply the new flex they have a device that check the flex if it will pass. 100% percent working

[@theowink]

Can you send me one (If its not to expensive)

[@farasatali9262]

Is this a same procedure for iphone 8 plus? Please reply fast

[@thegsmsolution1]

Comment your panic log data then i will guide you.

[@phirosika2881]

i bouhght a new motherboard from aliexpress i removed all the flexy i only leave the battery one on place but still going off and on do you think it could be a battery probleme?it is an iphone 11

[@davidukwen7288]

Good day Sir, I just purchased the iPhone 11 from someone checked everything and went home only to discover that it restarts. The panic string is missing i sensors, mic2. the seller later told me that the battery was changed before sale. please advice me. I am in Turkey now. How do I get the original OEM and change the bad flex.

[@thegsmsolution1]

Contact good repair center brother.

[@linhrose9301]

Hello sir, will I lose my photos that aren’t backed up if I try this method

[@thegsmsolution1]

Not at all!If you don’t restore then no problem of loose anything.

[@literallylit9469]

hello sir mine is missing sensor prs0 and the technician told me to replace the volume flex as cause of short circuit

[@thegsmsolution1]

The log shows that is the issue of charging flex.

[@Emaan-s7j]

hi. I have the same issue. but on my panic log it says; " SD: 0 Missing sensor(s)". and heating in power botton during this restarting does that mean it is not the charging flex cable problem?

[@thegsmsolution1]

Power flex also make that issues too.

[@denzolmorrow3577]

Mines say 1 missing sensors mic 2 but my phone charge fine so it gotta be my speaker right ? Plus I can't hear any of my phone calls unless I put it on speaker

[@denzolmorrow3577]

And my battery health is 91

[@nandujaraj2062]

do you got any solutions

[@clutchergaming5673]

How was your battery heath bro??

[@mrchilli8144]

Mine is stick on recovery mode and keeps on rebooting while I'm trying to restart and upgrade it via iTunes what should I do.

[@thegsmsolution1]

Any error code with iTunes.

[@adedoyinakinbi8013]

Hello please I’ve an iPhone XR. I can’t record voice note and when the speaker is on they can’t hear but when it’s off they can hear me properly. What could be the problem

[@thegsmsolution1]

Might be earspeaker flex damage.While on loudspeaker that mic works.

[@adedoyinakinbi8013]

@@thegsmsolution1 it doesn’t work on speaker but works when the speaker isn’t turned on

[@alekhyaravi]

Hai sir IPhone 6s Plus auto switch off within half an hour time after screen replacement . When it switch off won’t turn on using lock 🔒 button( power button ). By Using power cable its switching on But lock button working And there is no panic data . Plz help me sir

[@thegsmsolution1]

What about the battery condition after off remains same or drain to extremely low.

[@alekhyaravi]

@@thegsmsolution1 remain same sir . I thought it was battery problem and changed battery still same

[@thegsmsolution1]

Such fault needs more diagnosis so make sure that first. Might be a home button or proximity flex issue too. Check by removing first and confirm that there are any light-related issues or not.

[@adedoyinakinbi8013]

Mine says SD:1 BC:1 missing sensor: mic 2 What could it mean

[@thegsmsolution1]

Charging or earspeaker flex remove and check.

[@sabbagh.times.official]

Bootloop and 0 percent battery remaing on my iphone x what i do

[@prettyboy3283]

Mine restarts when on charged like 2 mins or more But it restarts again and again…. What to do

[@Rxvzn]

My panic log says (userspace watchdog timeout: no successful checkins from thermalmonitord) I don’t know what that is or how to fix it it’s an iPhone X

[@thegsmsolution1]

Can you send the full detail? The short log shows the problem with charging flex. You can test it by replacing a new one first.

[@Rxvzn]

@@thegsmsolution1 "panic(cpu 2 caller 0xfffffff0235cf690): userspace watchdog timeout: no successful checkins from thermalmonitord in 180 seconds service returned not alive with context : is_alive_func returned unhealthy : current 7bfffffffff, mask 67fffffffff, expected 67fffffffff. SD: 0 BC: 0 RC: 0 BS: 0, Missing sensor(s): mic1 service: backboardd, total successful checkins since load (250 seconds ago) my phone doesn’t continuously restart randomly it does it around 1-10 Times then it goes back to normal and works fine but starts again randomly, The bottom speaker recently just randomly cuts and stops playing audio then comes back. I didn’t drop my phone or anything either to cause that.

[@Rxvzn]

@@thegsmsolution1 I’m assuming the restarting is caused by the broken or malfunctioning hardware that I’m probably going to replace but I don’t want to spend money if replacing said parts won’t fix the restarting issue

[@thegsmsolution1]

The log shows there is a problem with your charging flex. This flex causes various symptoms like Lagging on use, Speaker issue, Restart on 3 minutes, etc.

[@thegsmsolution1]

If the flex was not good quality then this can't be fixed. I already mentioned this in the video.

[@brainylion7492]

HELP : mine is saying Missing sensor(s): TG0B TG0V , what do i need to replace?

[@thegsmsolution1]

log shows that is battery issue.

[@brainylion7492]

@@thegsmsolution1 Then how can i fix that changing battery or what ?

[@thegsmsolution1]

Replace battery your Problem fix.

[@mind_money_morphology]

So is this caused by water damage??

[@thegsmsolution1]

In most cases that cause by water damage.

[@mind_money_morphology]

@@thegsmsolution1 Thanks bro. Yesterday my iPhone was restarting on a loop… I solved MY ISSUE. Reset network and device SETTINGS. Open sim tray, leave iPhone on it’s side (like you’re gaming) for many hours 5+ next to a window or fan. Fixed for me.

[@marylicudan5772]

Hello my phone still keeps on restarting every 3mins😩 I already did everything that you do on your vid but still the problem doesn’t fix😭 pls help😭

[@destyramadini8670]

Same with me, my phone still restart 😭

[@cristineshinerodriguez6793]

Hi did u fix ther reatarting problem

[@Art_Factory16]

My iphone X keeps crashing every few hours.. i need to hard reset it every time.. and also its speaker doesn't work and app store doesn't install apps

[@thegsmsolution1]

Did you see the panic log? If not then see it that I mentioned in the video. You can send us your panic log data.

[@johnreynambatac30]

My phone is redmi and has a problem like this how to fix this pls

[@ВасилийКнязь]

I still have this problem after replacing the connector cable. help, writes SD 1 BC 1 missing sensor mic1

[@thegsmsolution1]

Did you replace the original one or after-market cable?

[@ВасилийКнязь]

@@thegsmsolution1 I installed the original today, it worked for 4 hours and the same error is in the logs, writes "SD1 BC1 Missing Sensor: mic1 / nservise" what does this error mean? what is SD1 BC1. Can you help decipher?

[@thegsmsolution1]

The problem was not solve after changing flex.

[@ВасилийКнязь]

@@thegsmsolution1 no, it worked fine for only 4 hours, and started to restart again

[@thegsmsolution1]

Replace original Flex brother.

[@chickennugget6216]

What did he replace?

[@dionapiolo8362]

Ey bro mine "panicString" : "Debugger message: WDT timeout What am i supposed to do?

[@thegsmsolution1]

Can you send me full panic log.

[@sahibek1]

Hello sir, i have the same problem with iphone 11. i disconnetted all cables but i have still this problem.

[@thegsmsolution1]

Can you send me the log data that i mention on the videos.

[@sahibek1]

@@thegsmsolution1 hello sir, this is my log data: kzbin.info/www/bejne/rnirY5JtgrKJaM0 ... i find out, that if i push power button and telephone sleep(black screen) then dont restart, only if telephone is woke(screen on) thant restart continues ...

[@sahibek1]

pls respond me

[@thegsmsolution1]

Brother, sometimes you have to put original charging flex and Try. Removing all flex is not the final solution you have to replace and check. Don`t forget to check by changing the middle frame once.Sometimes this may also cause like that issues.

[@waqasaziz3367]

New subscriber well done

[@thegsmsolution1]

Thanks for subbing

[@nanayawansong4940]

If am using mine to make a call I can use my phone till it goes low battery but if am not making any call it turns off after 2 minuites

[@thegsmsolution1]

Did you see panic log data that i mentioned.

[@abdimohamed9900]

Hey mine says SD:1 BC1 missing sensor:Prs0/inservice and its lagging/crashing when I go on my apps can you please help me

[@thegsmsolution1]

Fault related to Battery or lose contact of battery to the battery connector or Wireless charging related issues. Did you see the Battery health on settings?

[@abdimohamed9900]

Ya I took it the shop and showed them what u were doing but it’s still Turing off and turning on idk why all I did was try to clean the speaker and it started doing this

[@thegsmsolution1]

Did you see battery health on setting.Confirm battery health shows or not first.

[@abdimohamed9900]

Ya I battery is at 81 percent I had them remove all the flex and put it back but I haven’t replaced any of them do u think I have replaced a flex or what please help

[@aimihusna8026]

Mine was like, "panicString" : "panic(cpu 0 caller 0xfffffff0162de9ec): AOP DATA ABORT - pc=0x01070f4a fsr=0x00000a21 (Alignment fault). What is mean bu alignment fault? 😩

[@thegsmsolution1]

Can you send me the full log?

[@themobilesolution4341]

Superb solution

[@thegsmsolution1]

Thank you! Cheers!

[@iSolutionLab_DHA]

Any panic reader source??

[@hypothalamusiantired]

I replaced oem charging port for my iphone x but still restarting

[@Perfumery_by_Sabin]

Here is how you fix it. Stop buying iPhones! Done with this crap

[@JAY-fs9lg]

My iPhone 8 Plus keeps restarting.. I replaced my battery and 2 days later it’s restarting again

[@JAY-fs9lg]

"bug_type":"210","timestamp":"2022-08-01 15:16:56.00 +1200","os_version":"iPhone OS 16.0 (20A5328h)","roots_installed":0,"incident_id":"DAB7AB8F-2C5F-4A99-85E9-CD3ED343ACB3"} { "build" : "iPhone OS 16.0 (20A5328h)", "product" : "iPhone10,2", "socId" : "0x00008015", "kernel" : "Darwin Kernel Version 22.0.0: Tue Jul 19 02:35:46 PDT 2022; root:xnu-8792.0.188.142.2~2\/RELEASE_ARM64_T8015", "incident" : "DAB7AB8F-2C5F-4A99-85E9-CD3ED343ACB3", "crashReporterKey" : "dd20eb56d6344aa13d4392f49af404eb9fc45f30", "date" : "2022-08-01 15:16:56.77 +1200", "panicString" : "panic(cpu 1 caller 0xfffffff022d42530): userspace watchdog timeout: no successful checkins from thermalmonitord service returned not alive with context : is_alive_func returned unhealthy : current 1fffffffffc, mask 11fffffffff, expected 11fffffffff. SD: 0 BC: 1 RC: 0 BS: 0, Missing sensor(s): TG0B TG1B service: backboardd, total successful checkins in 196 seconds: 19, last successful checkin: 0 seconds ago service: SpringBoard, total successful checkins in 171 seconds: 17, last successful checkin: 0 seconds ago service: mediaserverd, total successful checkins in 196 seconds: 18, last successful checkin: 0 seconds ago service: logd, total successful checkins in 196 seconds: 19, last successful checkin: 0 seconds ago service: thermalmonitord, no successful checkins in 196 seconds service: runningboardd, total successful checkins in 196 seconds: 19, last successful checkin: 0 seconds ago service: wifid, total successful checkins in 196 seconds: 19, last successful checkin: 0 seconds ago service: configd, total successful checkins in 196 seconds: 18, last successful checkin: 0 Debugger message: panic Memory ID: 0x1 OS release type: Beta OS version: 20A5328h Kernel version: Darwin Kernel Version 22.0.0: Tue Jul 19 02:35:46 PDT 2022; root:xnu-8792.0.188.142.2~2\/RELEASE_ARM64_T8015 KernelCache UUID: 90E8F1B956E6C9755855A5FB91FD4D69 Kernel UUID: A39D125D-243E-359B-A2F5-749DCF6B3BAB Boot session UUID: DAB7AB8F-2C5F-4A99-85E9-CD3ED343ACB3 iBoot version: iBoot-8419.0.151.0.1 secure boot?: YES roots installed: 0 Paniclog version: 14 Kernel slide: 0x000000001c15c000 Kernel text base: 0xfffffff023160000 mach_absolute_time: 0x118c5490d Epoch Time: sec usec Boot : 0x62e7442e 0x0006e7a2 Sleep : 0x62e74539 0x00070ce6 Wake : 0x62e7455f 0x00009013 Calendar: 0x62e7458d 0x0007a058 Zone info: Zone map: 0xffffffe274cbc000 - 0xffffffe874cbc000 . VM : 0xffffffe274cbc000 - 0xffffffe35b320000 . RO : 0xffffffe35b320000 - 0xffffffe3a7fec000 . GEN0 : 0xffffffe3a7fec000 - 0xffffffe48e650000 . GEN1 : 0xffffffe48e650000 - 0xffffffe574cb4000 . GEN2 : 0xffffffe574cb4000 - 0xffffffe65b31c000 . GEN3 : 0xffffffe65b31c000 - 0xffffffe741984000 . DATA : 0xffffffe741984000 - 0xffffffe874cbc000 Metadata: 0xffffffe0f305c000 - 0xffffffe0f485c000 Bitmaps : 0xffffffe0f485c000 - 0xffffffe0f5944000 TPIDRx_ELy = {1: 0xffffffe65a6d82b8 0: 0x0000000000000001 0ro: 0x000000016becb0e0 } CORE 0: PC=0x00000001bd491250, LR=0x00000001bd521234, FP=0x000000016ba69dc0 CORE 1 is the one that panicked. Check the full backtrace for details. CORE 2: PC=0x00000001b1c62744, LR=0x00000001b7f64574, FP=0x000000016d7417e0 CORE 3: PC=0x00000001dc7f8394, LR=0x00000001dc7f44d0, FP=0x000000016bcef660 CORE 4: PC=0xfffffff02338ad1c, LR=0xfffffff02338ad1c, FP=0xffffffea01da3f00 CORE 5: PC=0xfffffff02338ad1c, LR=0xfffffff02338ad1c, FP=0xffffffea01d2bf00 Compressor Info: 2% of compressed pages limit (OK) and 0% of segments limit (OK) with 1 swapfiles and OK swap space Total cpu_usage: 83285753 Thread task pri cpu_usage 0xffffffe65a6d82b8 watchdogd 97 13433 0xffffffe65a005d18 backboardd 63 125912 0xffffffe65a6d9d18 securityd 20 2302937 0xffffffe65a2af0e0 coreduetd 4 3080515 0xffffffe65a3b5d18 duetexpertd 4 3036828 Panicked task 0xffffffe48dc379f8: 407 pages, 3 threads: pid 57: watchdogd Panicked thread: 0xffffffe65a6d82b8, backtrace: 0xffffffe274c3b0d0, tid: 1427 \t\t lr: 0xfffffff02335ba34 fp: 0xffffffe274c3b140 \t\t lr: 0xfffffff02335b818 fp: 0xffffffe274c3b1b0 \t\t lr: 0xfffffff02348c4f0 fp: 0xffffffe274c3b220 \t\t lr: 0xfffffff02348b530 fp: 0xffffffe274c3b2e0 \t\t lr: 0xfffffff0233115fc fp: 0xffffffe274c3b2f0 \t\t lr: 0xfffffff02335b25c fp: 0xffffffe274c3b6a0 \t\t lr: 0xfffffff0239d933c fp: 0xffffffe274c3b6c0 \t\t lr: 0xfffffff022d42530 fp: 0xffffffe274c3b6e0 \t\t lr: 0xfffffff022d41ebc fp: 0xffffffe274c3b700 \t\t lr: 0xfffffff022d41080 fp: 0xffffffe274c3b820 \t\t lr: 0xfffffff023969b2c fp: 0xffffffe274c3b9c0 \t\t lr: 0xfffffff02345a500 fp: 0xffffffe274c3bae0 \t\t lr: 0xfffffff023361374 fp: 0xffffffe274c3bb80 \t\t lr: 0xfffffff023339418 fp: 0xffffffe274c3bbf0 \t\t lr: 0xfffffff02334e734 fp: 0xffffffe274c3bc90 \t\t lr: 0xfffffff02334eb54 fp: 0xffffffe274c3bd80 \t\t lr: 0xfffffff023482a30 fp: 0xffffffe274c3be50 \t\t lr: 0xfffffff02348b944 fp: 0xffffffe274c3bf10 \t\t lr: 0xfffffff0233115fc fp: 0xffffffe274c3bf20 ", "panicFlags" : "0x1803", "bug_type" : "210", "otherString" : " ** Stackshot Succeeded ** Bytes Traced 186366 (Uncompressed 492080) ** Writing local cores... Beginning dump of panic region of size 0x2ea25 (kdp_reset_output_vars) Encryption requested, is unavailable, and enforcement is active. Skipping current core. Skipping panic region dump Beginning coredump of kernel (kdp_reset_output_vars) Encryption requested, is unavailable, and enforcement is active. Skipping current core. Skipping coredump Beginning coredump of SIO-coproc coredump_init returned KERN_NODE_DOWN, skipping this core Beginning coredump of GFX-coproc (kdp_reset_output_vars) Encryption requested, is unavailable, and enforcement is active. Skipping current core. Skipping coredump ", "repairStatus" : "1", "binaryImages" : [], "notes" : ["Source: (null)"]

[@thegsmsolution1]

The log clearly indicates that there is an issue with the battery itself. Loose contact of battery to the battery connector.

[@JAY-fs9lg]

@@thegsmsolution1 Thank you 🙏🏽 do I gotta reconnect the battery?

[@thegsmsolution1]

Don`t forget to post feedback after doing this.

[@JAY-fs9lg]

@@thegsmsolution1 thank you! Problem solved

[@kristelligaton6022]

Hi, my iphone xs max randomly shutdown and restart with the low battery. Can you help me how to fix this? I already replace the battery last january. I dont understand why it keeps shutting down. Please help me. Thank you

[@thegsmsolution1]

Sounds like swi issues.

[@kristelligaton6022]

@@thegsmsolution1 how can i fix this? Im afraid to do hard reset it may stuck on reboot loop.

[@thegsmsolution1]

If your iPhone power on make backup of important data.

[@hypothalamusiantired]

Please help me, i already change my battery and charging port but still restarting,mine says ""panicString" : "panic(cpu 3 caller 0xfffffff01ece64fc): userspace watchdog timeout: no successful checkins from thermalmonitord service returned not alive with context : is_alive_func returned unhealthy : current 7bfffffffff, mask 67fffffffff, expected 67fffffffff. SD: 1 BC: 0 RC: 0 BS: 0, Missing sensor(s): mic1 service: backboardd," -in panic base ) then in my panic full says" "panicString" : "panic(cpu 0 caller 0xfffffff011f564fc): userspace watchdog timeout: no successful checkins from thermalmonitord service returned not alive with context : is_alive_func returned unhealthy : current 6bfffffffff, mask 67fffffffff, expected 67fffffffff. SD: 0 BC: 0 RC: 0 BS: 0, Missing sensor(s): mic1 service: backboardd,. Which of 2 i need to follow?

[@pawanmeena1840]

Thank you very much bro

[@thegsmsolution1]

Welcome

[@shikorina2k]

anyone else’s iPhone X restarts when they are -6 minutes into phone call or video call. Someone help me please

[@thegsmsolution1]

Check the log data and send me.

[@hollarxcomm]

@@thegsmsolution1 bug_type":"210","timestamp":"2023-01-01 01:42:10.00 +0100","os_version":"iPhone OS 16.1.1 (20B101)","roots_installed":0,"incident_id":"78A28504-4FE1-4F45-AB76-3A94DB2A6FA0"} { "build" : "iPhone OS 16.1.1 (20B101)", "product" : "iPhone10,3", "socId" : "0x00008015", "kernel" : "Darwin Kernel Version 22.1.0: Thu Oct 6 19:34:18 PDT 2022; root:xnu-8792.42.7~1\/RELEASE_ARM64_T8015", "incident" : "78A28504-4FE1-4F45-AB76-3A94DB2A6FA0", "crashReporterKey" : "27ee5e94386f58c53f7dd4453e80f15ea663d8ed", "date" : "2023-01-01 01:42:10.13 +0100", "panicString" : "panic(cpu 3 caller 0xfffffff0188d9b74): AOP PANIC - stk_fail - cma(8) stk_fail RTKit: RTKit-2062.40.13.release - Client: iphone10baop:AppleSPUFirmwareBuilder-427.40.2~20280 !UUID: ba4eaca9-2be7-37c2-93bf-738d6f06f44c Time: 0x0000004563512956 Faulting task stack frame: Faulting task 8 Call Stack: 0x0000000001071618 0x00000000010711b2 0x0000000001071026 0x0000000001072c7e 0x0000000001000b7a 0x0000000001064a12 0x0000000001071e30 0x0000000001039b26 0x000000000103cd52 0x000000000103af7e 0x0000000001071c8e 0x0000000001066398 000000000000000000 Mailbox (0): (0) Inbox AKF_KIC_INBOX_CTRL = 0x00027701, AKF_KIC_MAILBOX_SET = 0x00001101 Outbox AKF_AP_OUTBOX_CTRL = 0x00021101, AKF_AP_MAILBOX_SET = 0x00000000 dir endpoint timestamp msg ==== ============ ==================

[@hollarxcomm]

Please what could be the problem for this my iphone i just sent the log data

[@jobayerhossan7794]

Thank you boss

[@thegsmsolution1]

Welcome

[@shadoyx0783]

I had to go to parts which I have never seen on my phone

[@randomdude245]

My I phone shuts off randomly then starts up to low battery then i restart it it goes to back to original battery

[@thegsmsolution1]

Can you see the battery health status or not ?

[@randomdude245]

@@thegsmsolution1 it shows 0 percent battery remaining and restaurants every 3 minutes and is laggy too analytics show1 missing sensor thermal monitored return not alive battery is replaced so I cannot see the health

[@RaHuL-ij5fd]

@@randomdude245 disconnect battery then again connect battery cable make sure it connects properly.

[@nanayawansong4940]

Wen mine is offing I see the Battery pls help

[@ayatoamagiri7682]

I don't have the original charging port cable, would it be working for replacement cable?

[@thegsmsolution1]

Buy good quality flex or use original flex from doner iPhone.Most of the flex as the copy is not good in use showing many problems as I mentioned in the video.

[@octaviovillanuevaz1993]

Excellent thank you

[@thegsmsolution1]

You are very welcome

[@richardali6772]

Hello I need help my iPhone X keep restarting after 30 mins or sum

[@richardali6772]

panicString" : "panic(cpu 0 caller 0xfffffff01f973a0c): \"dart-ave (0xffffffe134a3d800): DART(DART) error: SID 0 STE invalid exception on read with DVA 0x3ac00050 (TTBR 0 SEG 0x1d6 PTE 0) ERROR_STATUS 0x80000002 TIME 0x74f64be525 AXI_ID 0x28\"

[@thegsmsolution1]

Brother this log shows that might be issued on the Battery of your iPhone or Loose contact of battery to Battery connector.

[@brennikcarlos1108]

why does it restart and the battery turn to 1%

[@thegsmsolution1]

Battery might be the issue check it first.

[@MaliParam]

Thank you

[@thegsmsolution1]

You're welcome

[@rmobile9680]

Thanx 🎉

[@thegsmsolution1]

Welcome 😊

[@ceejay_gaming9636]

iPhone x videos crash when you try to play them

[@thegsmsolution1]

Is that iphone restart randomly.

[@loydespenida7544]

My iphone x restart 4-5 times a day randomly at any time😩

[@thegsmsolution1]

Did you see your Panic Data ?

[@loydespenida7544]

@@thegsmsolution1 what is panic data😭

[@thegsmsolution1]

See carefully i mentioned on the video.

[@CanberkSezer]

What i don't understand about the video is, when you remove all flex (including charging flex) the phone still restarts. But when you adapt a new charging flex the problem solves. IF the problem was caused by the charging flex, how did it affect the phone while it was removed? (I mean you removed it, it was not connected to the motherboard but how can it cause restarting during the situation?)

[@thegsmsolution1]

That is all about the IOS system. On old IOS you can fix it by remove but on new IOS you have to remove it. In my cases that flex is faulty and copy so that causes such a problem. On the latest IOS, you have to replace not only by remove that I mention for information purpose.

[@Malvinmeven]

The iphone is waiting for a Signal from the charging Port so if its faulty or disconnected ist wont get a respont. Thats why ist also Doesnt help if you unplug it.

[@kelvinanselmo7374]

The charging flex may be water damaged and needed to be replaced with original part.

[@canceledcomedy967]

The charging port must be discovered as OEM so it will not have that issue. I noticed this with aftermarket charging ports it looks like its serialized so after install it doesn't get signal with the phone so it starts to turn the phone off and on but once you install an oem one, then everything is good. :).

[@Troubledboy88]

@@canceledcomedy967 are they serialized to each individual phone like batteries, screens(tru tone) etc.? Or can you just buy an iPhone oem one and fix the issue?

[@alekhyaravi]

Excellent information sir 🙏👌

[@thegsmsolution1]

Thanks and welcome!

[@michaelpalomo1833]

Same issue but mine 0% remaining battery percentage

[@thegsmsolution1]

Might be battery or lose contact of battery.

[@michaelpalomo1833]

My battery health 96% i replace the charging flex still the same issue sir

[@michaelpalomo1833]

Some times 56% batter healt on screen then afrr auto restarting 0% remaining percentage

[@65w.]

@@michaelpalomo1833 battery

[@erebnora]

no restarts till 10 minutes. thanks!

[@thegsmsolution1]

Pleasure is all mine

[@simon057]

where can i buy an original charging flex cable? Do the ones on amazon work? My kernel panic is "panic(cpu 0 caller 0xfffffff0261de54c): userspace watchdog timeout: no successful checkins from thermalmonitord service returned not alive with context : is_alive_func returned unhealthy : current 73fffffffff, mask 67fffffffff, expected 67fffffffff. SD: 1 BC: 1 RC: 0 BS: 0, Missing sensor(s): mic1 service: backboardd" but sometimes its cpu 1 or cpu 3 and the current number changes would apreciate an answer!

[@thegsmsolution1]

The log shows there is a problem with your Charging flex no dough.Replace genuine one.

[@simon057]

@@thegsmsolution1 thanks for the fast reply. Besides I have the problem that the logic board gets very very hot in those 2-3 minutes. is this a normal side effect or do you think there is something wrong with the cpu

[@thegsmsolution1]

Lagging on use /Heating/restarting on 2-3 minutes like such issues is from these flex so check it first with replacing after then you can go forward to PCB.

[@babalolaisrael7679]

My keypad some part are not working anymore after this update 😨

[@thegsmsolution1]

If some part is not working that is not IOS issues there must be lcd problem check it once.

[@joshuagalos3266]

How do you update it when your phone always restart

[@thegsmsolution1]

Don`t update there might be a hardware issues.

[@herbiepama8388]

bro

[@RohanDamgudeVlogs]

can u give me ur email id i have same problem with my 6s i will mail u directly about my string

[@thegsmsolution1]

Contact me via Facebook page brother.

[@helgabecker1403]

Tghanks a lot from germany how to Donate 0.025 btc to you

[@thegsmsolution1]

I have a BTC wallet brother. If you want a small amount to donate to us. Check the below video description.

[@mohi5j583]

Bro, I have iPhone 11 I am getting same problem keeps restarting in 2-3min What can I do. If we will repair it how much it cost. Plz help brother

[@thegsmsolution1]

Did you see the video carefully? Here you can get some idea of the panic string. Send me the Panic data.

[@mohi5j583]

@@thegsmsolution1 where I can Send you?

[@ambemobile7857]

Mere bhi same problem hai 11 me aapka ho gya kya

[@cristineshinerodriguez8256]

Same here

[@cristineshinerodriguez8256]

@@thegsmsolution1 hi i already pm you in FB

[@michaeloyi5568]

“Panicstring” panic (cpu 2 caller 0xffffffff01b9f0598): userspace watchdog timeout: no successful checkins from thermalmonitord in 180 seconds service returned not alive with context: is_alive_func returned unhealthy: current 7fffffffffffe, mask 37fffffffffdff, expected 37ffffffffdff SD: 0 BC: 1 RC: 0 BS: 2, Missing sensor(s): TG0B service: backboardd

[@michaeloyi5568]

Please I need help, what does this mean and what do I need to replace? This device is an iPhone Xs

[@thegsmsolution1]

Brother looks some issue with battery or loose contact of battery to connector check this.

[@michaeloyi5568]

@@thegsmsolution1 Thanks a lot!

[@thegsmsolution1]

Welcome brother.

[@ejemudaroanthony]

New subscriber here... My iPhone X restarting randomly , my panic report below and tell me what to do pleaee🙏🙏 "panic String" : "panic (cpu 0 caller Oxfffffff01a28254c): userspace watchdog timeout: no successful checkins from thermalmonitord in 191 seconds service returned not alive with context: is_alive_func returned unhealthy: current 3fffffffffe, mask 67ffffffff, expected 671ffffffff. SD: 0 BC: 1 RC: O BS: 0, Missing sensor(s): TGOB TGOV service: backboardd, total successful checkins in 4603 seconds: 457, last successful checkin: O seconds ago|nservice: SpringBoard, total successful checkins in 4577 seconds: 456, last successful checkin: 0 seconds ago service: mediaserverd, total successful checkins in 4603 seconds: 457, last successful checkin: O seconds ago service: log, total successful checkins in 4603 seconds:

[@thegsmsolution1]

This log indicate that the problem with your Charging Flex.

[@danielkissi6322]

Hello new subscriber here. My phone is giving me thesame issues. Please Find my panic report below and advice me on what to do "panicString" : "panic(cpu 1 caller 0xfffffff0184b0514): userspace watchdog timeout: no successful checkins from thermalmonitord in 180 seconds service returned not alive with context : is_alive_func returned unhealthy : current 7bfffffffff, mask 67fffffffff, expected 67fffffffff. SD: 0 BC: 1 RC: 0 BS: 0, Missing sensor(s): mic1 service: backboardd, total successful checkins in 211001 seconds: 21038, last successful checkin: 0

[@thegsmsolution1]

Watchdog timeout shows means there is a issue with your charging flex.

[@danielkissi6322]

@@thegsmsolution1 Problem solved after changing charging flex Thanks very much 🙏🏽

[@ejemudaroanthony]

New subscriber here... My iPhone X restarting randomly , my panic report below and tell me what to do pleaee🙏🙏 "panic String" : "panic (cpu 0 caller Oxfffffff01a28254c): userspace watchdog timeout: no successful checkins from thermalmonitord in 191 seconds service returned not alive with context: is_alive_func returned unhealthy: current 3fffffffffe, mask 67ffffffff, expected 671ffffffff. SD: 0 BC: 1 RC: O BS: 0, Missing sensor(s): TGOB TGOV service: backboardd, total successful checkins in 4603 seconds: 457, last successful checkin: O seconds ago|nservice: SpringBoard, total successful checkins in 4577 seconds: 456, last successful checkin: 0 seconds ago service: mediaserverd, total successful checkins in 4603 seconds: 457, last successful checkin: O seconds ago service: log, total successful checkins in 4603 seconds:

[@jokerphone888poomobile24]

thank you very much bro

[@thegsmsolution1]

Always welcome