iPod Touch Glass and LCD Repair and Disassembly (2nd Gen)

[@wii52]

i recommend this video who needs to find a way to fix their ipod for free, this video saved my ipod and you saved me from getting a new ipod touch

[@doubblea21]

This is by far the best video i have seen on the ipod touch 2g disassembly. Although, please make a video on how to take apart the logic board in order to get to the memory chip an so forth. nice video

[@475george]

yup what a good video, one of the best video i have seen so far, now i can replace my battery with no problems at all

[@ilovetavernwenches]

the best video disassembly video on here. good job

[@CaseyCasedilla]

I dropped my ipod in school's toilet yesterday. i took it out, took off the case, dried the outer cover of the ipod itself off.the screen slowly got smaller and it kept turning on and off. Immediately, i ran to cafeteria and the lunch ladies got me a bag of rice. they told me to leave it in there for 24 hours.today,i took it apart using your video because other websites suggested i take it apart and put it in with the rice again. this is as far as ive come. Guidance is appreciated! thanks!

[@PowerbookMedic]

@phantomkyle566 - Yes, at 6:57, the headphone board is the part in the right hand side of the part the tech is removing and can be easily removed from there.

[@PowerbookMedic]

@wizrafi - When you go in to change the digitizer, check out the button and make sure everything is routed and connected properly. If it still doesn't work, you'll likely need to replace the part.

[@ggpolgusj]

thank you so much, your video it was very useful for me. I have opened my ipod touch to clean the dust under of the glass for a first time. with your help it was almost easy.

[@FherAlvino]

Hi excellent video thank you for share it, I have a doubt I hope you help me... My iPod touch 2g has broken the display and I have another iPod but it is 1g, let me know if I can put in iPod 2g the display from Ipod 1g, it is compatible that? Thank You !!!

[@umarthebeast]

Is the iPod touch 3G similar to the 2g. In other words can I use this video as a reference for disassembling one?

[@mattador]

Is the same method to remove the screen used on the 1st gen iPod Touch? Also, I have grey lines that are "expanding"; does that mean that my LCD screen needs to be changed?

[@PowerbookMedic]

@jusbekos - Usually that is the result on not plugging in the LCD cable properly or of a defective LCD or logic board.

[@3xtralife]

My iPod mini's hard drive went bad, would it be cheaper to buy a new hard drive or a compact flash chip?

[@PowerbookMedic]

@3xtralife - You'd need to buy a replacement drive the same specs as your current drive (aside from storage capacity)

[@PowerbookMedic]

@RyanBeastmode - You'll likely need to replace the logic board. Depending on how wet it got, you may just be better off replacing the iPod.

[@shizzel122]

hey Medic is it possible to unsolder the battery and install a new one as well??

[@PowerbookMedic]

@Moviemaker3004 - There shouldn't be glue unless you are opening it incorrectly or you bought it used and someone messed with it before you.

[@Metfull]

Hello, I've seen your videos, but I have a question about a problem here in my ipod touch 2g. Well, the backlight was all right, but suddenly, it didn't work again, so, the ipod now seems to be at the minimum brightness level, so I want some help if I should buy a new display or I can fix it by myself, thank you.

[@cmdnapster]

is the earphone jack a clip on or solder on?

[@dragonpat12]

I have a 2nd gen ipod touch. I got it from a friend not two months ago. All is well and then suddenly the backlight stops working. The ipod works still, but it just doesn't brighten. Now, my question is, could a simple replacement backlight fix this, and if so, where can i purchase a backlight?

[@kingkornonaleash1]

how is the black button of the screen attached? i bought a glass screen on ebay and it didnt come with that button of the electronics in the back. It also didnt come with those clips on the sides to hook it back into the frame. Any suggestions?

[@PowerbookMedic]

@umarthebeast - They're similar, but not identical. You can use our 3g video for the 3rd gen iPod Touch though

[@PowerbookMedic]

@snaggypaggy - You'll have to replace the digitizer if you tore the digitizer cable.

[@teews64]

i was wondering about the volume and power button component that you took out cause i broke it and would like too know were 1to buy 1. plz help

[@phantomkyle566]

@PowerbookMedic I see. I'm guessing that step requires soldering, right?

[@PowerbookMedic]

@MoreauDePaulinc - If you tore the ribbon cable, then it will not worked. It depends what you mean by "snapped."

[@PowerbookMedic]

@xjfanatic14 - Either the LCD or the logic board. It's hard to say without changing the parts.

[@PowerbookMedic]

@Fabu2411 - It's a Phillips size #00. They are available from our website.

[@PowerbookMedic]

@DameonRatcliff - It's likely a cable is not properly seated.

[@PowerbookMedic]

@TheSlimshady94 - You likely have a logic board issue and need to replace the board.

[@mamaschili]

Quick ?. While removing the lcd screen. In the bottom next to the Lcd connector . Is a small brass/copper spring?. It came off. I have the small piece how to I connect it back on?

[@iambrodiethedog]

I have a water damaged ipod 2nd generation. I know I will probably need to disassemble it but what do i after that?

[@PowerbookMedic]

@zell0420 - If you're talking about the connector on the board itself, you can't easily replace the component. You'd need to replace the board to replace a component connector such as that.

[@PowerbookMedic]

@niw2468 - I'd start by replacing the LCD, and if that does't work you'll need to likely replace the logic board.

[@PowerbookMedic]

Either the digitizer or the logic board.

[@mommy4b1g]

I have a ipod touch 2g and i need to replace the usb charging port.. i have bought one and just wondering about the solder points and how to go about changing this any ideas

[@TheDemonicFool]

I noticed that you are using a magnet on the screwdriver. Isn't it bad for the chip to use a magnetized tool? (I was just wondering as they are never magnetized)

[@PowerbookMedic]

@Metfull - Usually a new LCD will fix this issue.

[@PowerbookMedic]

@QWEFFF146 - Yes, but it's best to remove the LCD first so you don't damage it.

[@planB383]

this shud have like a million views not 185. this is an incredible dissambley of the ipod touch

[@DeAthZReApEr760]

@PowerbookMedic : Where would I be able to purchase a Logic Board? Do you repair iPod Touches?

[@veronicaortiz8006]

I was putting a new lcd into my ipod and accidentally dropped it :( the copper piece connected on the left side of the lcd came off. Does that mean I need to buy a new one?

[@skyboat345]

How much does the lcd and the class cost?

[@zell0420]

@PowerbookMedic how do i do that any soldering ?

[@JasonWirawan]

how to put all the things again? is it hard?

[@DeAthZReApEr760]

I have replaced the Digitizer with a Brand New one and its still unresponsive. The touch doesn't seem to work. I have tried another brand new digitizer but still no luck. Could it be a problem with the logic board? Please reply back. Thanks

[@TyndaleTaylorNelsonHouse]

@PowerbookMedic i did, i took it out and repluged it in several times now and the cable fits in snug so im lost.

[@Diongokil]

Can someone tell me what is the background-music for this clip? I was success to replace my home button anyway. Thanks!

[@verdecapo]

Hi. I buy mi Ipod Touch with some problems in the screen it has a black scratch across the screen and the rest it looks like a inverted color you know.. so if i do this can i fix it ?? thanks

[@BorregoGO]

I want the Glass and the LCD Now! how much?

[@DeAthZReApEr760]

@PowerbookMedic : I will give you guys a call. If I may ask, how much do you guys charge for repairs? Specifically with the problem for my iPod Touch 2nd Gen?

[@PowerbookMedic]

Hard to say. If the cable and lcd are fine, you should be fine. I'd recommend installing it and see if it works or not.

[@jusbekos]

hi, i plugged my lcd into my ipod, and all I get is a white screen. any suggestions?

[@guywholikesmacs]

wouldn't you have to re-adhere the lcd back to the plate?

[@leos4life21]

how do you put a new lcd in

[@PowerbookMedic]

@foshissle - No, it isn't that difficult if you go slowly and make notes of what went where.

[@PowerbookMedic]

@n151263 - You're in more trouble unfortunately. I'd recommend having the unit professionally repaired.

[@PowerbookMedic]

@QWEFFF146 - Yes, the audio jack is soldered.

[@tdalbright13]

i took my digitizer off and i think i did the entire thing wrong.. can i send it in to get repaired?

[@phantomkyle566]

If I wanted to replace the headphone jack, would I just pull it out from 6:57?

[@showiPhone]

hello! amm, well, my ipod touch (1g) the only problem is: when I turn on my ipod, sometimes the screen goes white, or few black lines look on the screen ,and only when I hit a small punch it repair. what can i do? Sorry my english is little bad :P

[@PowerbookMedic]

@guitarerik93 - Go back in and check your LCD cable connections. It's going to be a hardware issue.

[@PowerbookMedic]

For very old hard drives and very powerful magnets yes. For flash memory and very slight magnetization, no.

[@PowerbookMedic]

@MoreauDePaulinc - You can get the parts for repair from our website. It's hard to say if your iPod will still work or not. You may want to get it diagnosed. We offer a free diagnosis service as well.

[@PowerbookMedic]

@kevinngu20 - We do occasionally stock used ones. However they usually sell out very quickly when we do.

[@zer07777]

I was doing ok until I got up to the screw right before you take out the LCD. It seems to be rusted and I cannot get it loose. It looks like I even mangle the bite/engraving of the screw so its hard to get any torque on it. I really wanna repair this thing as its my mom's older Ipod Touch and it's probably the only way I will be able to afford one.

[@KING08KOKO]

Could you tell me what's the name for background music??

[@PowerbookMedic]

@XPain3X -If only the light comes on, you likely have a bad lcd or logic board.

[@PowerbookMedic]

@drumkilla - You can repair it yourself. We sell the parts at our website, and we do ship internationally as well.

[@captainblackjack123]

My I pods headphone jak doesn't work properly anymore like it doesn't play the music and ik it's not my headphones so how do I fix it?

[@kevinngu20]

Hey!! I want to by a used ipod touch. Do u have it!?!? ,

[@PowerbookMedic]

@Swaghacks4ever - They are two separate components so you replace them individually...either can be first.

[@andres985]

how to replace the wifi ribbon??

[@ShadowFade1924]

yah but now how do u put it back together

[@mynameistom1994]

so helpful. looking forward to your other videos :)

[@zell0420]

how do i replace Logic Board Cable ? i ruined my digitizer connection the little teeth got bent cause i got a diggi that was a fake

[@SSwankster]

@skyboat345 if you do it all yourself the lcd+ digitizer + bezel will cost about $20-$40 for everything.. however it is pretty easy to mess it up.. look it up on ebay

[@RoachDogggJR]

i have a weird problem.my ipod will turn off repeatedly and sometimes give the red shutdown slider.it used to only happen a few times now it happens at least every five minutes for two or more minutes. i think it has something to do with the button.if anyone knows whats wrong and how to fix it PLEASE reply!

[@PowerbookMedic]

@DeAthZReApEr760 - If that didn't fix the issue, then most likely you do have a bad logic board.

[@drumkilla]

my top screen is bursted, kan i order a new front and repair it myself? does anybody know where to buy it, if possible? i'm from holland, so if possible somewhere nearby holland :p

[@OscarDaGenius]

I tried fixing the cracked screen and now jt just doesn't turn on what is wrong????

[@gavin522531]

i dropped my ipod and the screen cracked and the image doesent work anymore.... it lights up but thats all it does.. and the touch doesnt work... what do i need to get?

[@Giorgieoh]

@snaggypaggy to the music: I cracked my glass on one side, I punctured my fingure slightly.... I shatterd small bits of glass in my eye. This can be quite difficult so take your time and don't do what I did.

[@PowerbookMedic]

@aznfriedrice415 - I strongly recommend never using superglue. It releases vapors while drying that can damage other components....not to mention it is just poor practice.

[@BunnyBunker]

you be like a dam pro lol Nice tutorial. I didnt need to fix my screen but now i do. i had a broken audio jack. fixed it but broke the glass and home button contact

[@SButlerMedia]

IF you touch the LCD screen when its ON will it mess it up ?????????????????? PLEASE reply anybody

[@Gamedini]

I spilled tea on mine, it comes on, hard keys work, but doesn't respond to touch. What should I replace?

[@secretweaponevan]

Fantastic video. Thank you.

[@RyanBeastmode]

My Ipod Got Wet Inside!!! I Tryed Drying It With A Blow Dryer But It DIDNT WORK!!!! ****PLEASE HELP****

[@PowerbookMedic]

@autokadas - We sell the screwdrivers at our website.

[@skyboat345]

@SSwankster thank you too, i'll look it up

[@phxdrummer16]

I think it will. Considering you can just buy new parts on Ebay.

[@stupid0rigami]

where is the internal speaker?

[@PowerbookMedic]

@phantomkyle566 - Yes it does.

[@PowerbookMedic]

@shizzel122 - Yes it is.

[@PowerbookMedic]

@TheDartblockstang - No, it does not.

[@Emeraldgamesharksify]

there's no clips . just an adhesive tapes

[@1ZosoLZ]

Man, these screws are so small!Very hard to loosen them up. And yes, I am using the right sized screwdriver.

[@skyboat345]

@NJPwestcoast thank, i'll take a look on ebay too

[@PowerbookMedic]

@843RebeLuTioN - Not really a trick to it...