Smith & Wesson M&P9 2.0 METAL

[@Iraqveteran8888]

We had to reupload this one due to an editing error. I apologize for the confusion. Thanks Smith and Wesson for sending us this particular sample to check out. Neat stuff for sure!

[@pole_barn_builder]

Thank you for assuring me I wasnt going crazy!

[@Rnemhrd]

Saw that yesterday.

[@chrisgabbert658]

🤷‍♂️ dude 😁

[@JoeGarofaloII]

Not a problem sir, I was wondering about that yesterday lol. Glad you got it back up!

[@12monkey57]

What was the editing error??

[@debbiemiller4281]

Smith & Wesson are killing it with their M&P pistols & rifles. Making a reliable affordable firearm for every American is honorable. S&W & PSA both actually.

[@jeremiahpaul02]

I agree I buy most my ammo and accessories from psa also a few firearms and have always had a good experience.

[@flexinclouds]

100% agree. I have an M&P 2.0 compact 4".. and it is the shit! Ran loads of different ammo, (even tried a mag of steel case), & I run Speer Gold Dot +p 124gr. JHP for self defense.. and Ive never had a malfuntion/issue of any kind. Im extremely accurate with it compared to any other pistol ive shot, and when I mag-dump it (to practice realistic self-defense shooting) my groupings get wayy smaller somehow. This thing is a beast. And a PSA AR or AR pistol in 9/10mm is next on my list. Im really leaning towards a pistol caliber carbine w/ a 5"-8"ish barrel. Something light & compact, but very effective close up & at 100-150yrds or so. But also want one of their 16" AR's just cause😄🤘🇺🇸

[@tomthebomb45]

i love how handgun technology went from metal, to polymer, back to metal... we've come full circle.

[@ragnarthefearless9235]

Lol yeah weird polymer guns are going metal and metal guns like 1911's are going polymer.

[@RobertSmith-ce5wk]

Just like cell phones. Started out big, then they went as small as they could, now they're going big again.

[@blkt6]

What’s old is new again. We get bored to easy

[@MattiasTheMerc]

You can keep the metal guns lok

[@throatpunch4789]

NO, The polymer AND metal technology are still around silly guy, they haven't "went" anywhere😂 They never stopped making metal guns

[@MrPlecemanvpd]

Making metal guns great again

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁.....

[@lovethehuntOutdoors]

Merica, Damn Straight!

[@DeathN0cturnal]

eh CZ has been doing that for a while

[@cwatson42785]

If you've been watching long enough you know Eric loves himself some M&P!!!

[@jenniferhaasch7961]

Funny how the industry is going back metal frames, It's like California going back to using candles.

[@leveragelifestyle8581]

Lmao that's great

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁 ...

[@Berto-1117]

Lmfao

[@kodalife8642]

Damn

[@bavarianauto3794]

yes, cause polymer is the only right answer 😒

[@agentorange3698]

I’d love to see the metal frame in 10mm

[@omaolalaidh1289]

Ya and in a full 5" or 6"

[@xb0xisbetter]

This was my exact immediate hope as well. Bears and wolves are taking back the wilderness areas of my state and I have wanted a double stack 10mm ... just in case. I was waffling over just settling for an RIA HC 1911 until S&W released their optics-ready 10mm. If they release an aluminum frame thumb safety variant of the 10mm M&P, I am sold.

[@masterk5066]

i was already gonna type this lol. kinda redundant in 9mm. already got metal 9mm & like 4 plastic 9mm's, all i need

[@BukkNutty1]

357.sig

[@JeffJBuck]

Especially with the better trigger.

[@billparks7368]

I need to get one of these. I love the m&p line and basically all the s&w pistols.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁

[@AllAboutSurvival]

Sweet! Always great to see you shoot a round. That’s what I’m talking about. Pure entertainment and education as well

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁 ....

[@fullmindstorm]

🤔 I cant help to think Barry would of loved that m&p metal pistol. Its a fantastic shooter, and beautiful gun. 😍 Just a nice pistol.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@enricomandragona163]

Who's Barry!!???

[@Fitterr26]

@@enricomandragona163 Barry was the chad before chad. In the early days of this channel Eric and Barry use to make video at moss pawn where they worked. Barry was really a great guy I recommend going back to look at some early videos.

[@LF12468]

@@Fitterr26 Barry who?

[@lucasblanchard47]

Man, if I ever decide to get a S&W pistol, this would probably be the one that I’d get!

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁 ...

[@xb0xisbetter]

I have an OG M&P and it is a fantastic gun besides the garbage factory trigger. Dropped an Apex trigger in it and it was good to go. It was my first striker-fired polymer wonder 9. Still don't own a Glock and have no desire to. Since basically everything is stainless (and usually even nitrided on top of it), the grip angles are actually sane, and they offer manual thumb safeties, I don't think anybody else makes a more compelling polymer-framed striker-fired gun. Closest competitor might be CZ. This makes me wonder if they'll make an aluminum frame 10mm, since I had been eyeing their 10mm as my first 10mm ever since it came out. Was previously considering settling for an RIA HC 1911. If they make an aluminum frame 10 ... I will give in to the temptation.

[@bosse641]

Drooling over this one. Metal is the way to go.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁

[@JC-gy5bh]

I agree man, wonder if Glock will follow... that'd be interesting.

[@xb0xisbetter]

@@JC-gy5bh As long as Glock can continue selling overpriced tupperware guns and save a couple extra bucks each, they'll just keep doing that. They're the Apple of firearms, even down to the cultists who sing their praises.

[@jonah8133]

What advantages does metal give you? I'm a newbie and trying to decide on this exact pistol in polymer or metal

[@bosse641]

@@jonah8133 ....I like the look, the feel and the heft of a metal pistol/revolver. Helps with recoil as well. And I prefer full-size pistols/revolvers.

[@Juan0481]

I started with m&p, went glock for a while and even sig. I always go back to my m&p.. the 2.0 has been my edc for years now. I train with it, compete with it. It's always with me. I have to say, the new metal one might be in my future as well. God bless America!

[@badhombre8383]

Thank goodness they finally fixed the triggers. I remember the one on my 40ve. Probably why I haven’t revisited s&w for years..The shield plus now finally is a amazing firearm.

[@paulbrown7275]

Would be nice to see if the slide and barrel from the old polymer frame , fit the new metal Frame making it a 5 inch . Then you would have the red dot 5 inch ported barrel to see if the metal frame makes a difference .

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁...

[@JoshuaE-BiblePatriot]

Y’all don’t even rush making videos. Quality over quantity. Us boys and girls can wait

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁.....

[@bigtrajik1]

Did this get taken down or something because I swear to God I watched this yesterday

[@Seth_Murphy_00]

Thinking the same thing…

[@hopewilliams6705]

I watched it yesterday as well

[@rednecksniper4715]

Yeah I saw it yesterday too

[@FVPS904]

Probably released it too early. S&W determines when review videos go live.

[@rednecksniper4715]

@@FVPS904 there were other videos out before that

[@DD-jn1mp]

Crazy to think I used to watch this channel when I was 13 and now as an adult, I still love this channel and use it as a resource

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁......

[@gizmosgadgets4146]

Same here!

[@Timber_LXG_5]

Full size metal guns are the best funny to see us returning to tradition

[@1014p]

Do realize the current run are generally near weight of polymer. Another words the original metal were almost always steel except a few like Barreta 92 series. So now its a blend of metal and polymer. S&W M&P series employs a steel sub frame with polymer fill. Now we have polymer/tungston, exotic metal blends, and aluminum blends. Im excluding competition race guns which often run steel frames or aluminum tricked out.

[@CtrlAltRetreat]

@@1014p Sig 226 generation guns were alloy, berretta as you mentioned was alloy, a bunch of cold war designs were alloy. Those old guns hold up too. This really is more of striker fired going metal. The only significant striker fired metal cold war gun was the p7 and that was a truly fine gun, but too expensive to be reasonable.

[@MatthewMcNair]

I had a 1.0 and have since upgraded to a 2.0 chambered in 40S&W. I can reliably get my slide to drop from slidelock with magazine insertion. I always thought that was a feature. It's quite useful in my competition shoots. 🤷‍♂️

[@brossovitch]

I didn't plan on buying another M&P this year.. then S&W does this.....

[@franklewis7100]

Back to metal from Polymer....... I can dig this 100%

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁.... ..

[@kylej.740]

Got mine the other day. Love it. Had a few others shoot it and were amazed.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁

[@jonah8133]

Any idea how it compares to the polymer framed 2.0 same size? I'm torn between the metal and polymer 4.25in barrel

[@michaelsorokin1548]

Went from steel, to polymer, to aluminum and that is awesome. Perfect middle ground. Lighter than steel, stronger than polymer.

[@solomonmarcus5496]

I'm ecstatic about S&W making the M&P in metal, it shows they have guts & are still on the cutting edge in the industry. I would kill for a SA/DA hammer fired model too!!

[@alphaspartan]

for real, it's crazy no one thought to make guns out of metal before. it's like going from making planes and boats out of wood to metal. like damn, I wish i'd thought of that first, i'd be rich!

[@solomonmarcus5496]

@@alphaspartan I hear you bro. I don't have an issue with striker-fired pistols, I just like options.

[@samsnyder4433]

A 5” pro model would be sweet love the new gun… way to go Smith & Wesson!

[@ricks.1092]

If this thing sells well. You could bet that other calibers, barrel lengths, performance center models will come out. I think you'll see a 5" soon. The currently model could be a homerun for Smith. I hope so. Lately Sig is getting all the praise

[@grindersandgears3445]

I'd be surprised if they didn't, makes more sense than a standard or carry version to be metal. I'd rather shoot a metal gun, but I'd rather carry a polymer, and I feel like that describes most people who carry.

[@operator8014]

Looks cool. Wish they made it in a more masculine caliber for gods sake.

[@RaceMentally]

Had one in my hand yesterday and it feels good!

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@mikemanske9212]

I'm sure you get tired of people asking but the meltdown videos are amazing to watch!

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁

[@xb0xisbetter]

Ammo prices are coming back down, finally, so maybe they'll do some more of those soon.

[@bendodge6502]

The changeable back straps is a huge deal for the M&P line.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@polypolar]

sweet, as soon as I held the M&P in my hands at the local gun shop I knew that was the gun for me. I love the grip feel, I got the desert tan one and a few ETS 30 round mags 🙂👍 I am wondering what the price point is on the new metal ones though I assume it's a bit more

[@tsoliot5913]

$799-$1,200 depending on which version

[@blakenoble9468]

Just wish they would put the beaver tail back on.

[@mag318]

The new pistol looks great and I do like the color, the only bad thing is that Cerekote doesn't hold up well if you're going to carry one. Since the slide is Stainless I wonder why S&W never offered an M&P in natural Stainless. Thanks for another interesting video as always.

[@HSKFabrications]

Good, I love it when it has patina.

[@jasonroberts9357]

Beautiful pistol! I'm in the minority, but I hope they come out with a 40 S&W version with a manual safety.

[@lthomas4697]

I am a 40 kind of guy.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁

[@jasonroberts9357]

@@lthomas4697 Right on brother!

[@xb0xisbetter]

Only .40 I have ever shot was a friend's H&K P30. Only other handguns I had ever shot back then were 1911s and that thing fit my hand like a glove and I somehow managed to shoot it like it was on rails. It was probably just H&K's recoil spring voodoo, but the recoil was pretty pleasant in contrast to what most people seem to always say about the cartridge. That one range trip makes me still want a P30 to this day. What draws you to .40 S&W, in particular? It doesn't really perform any better than other alternatives and you end up boxing yourself into a shrinking market. I agree on the thumb safety. It was the only thing that ever convinced me to get a striker-fired polymer wonder 9 in the OG M&P 9. Only other one I have gotten since is the Taurus G2c, which also has a manual safety.

[@hereforthechips7710]

@@xb0xisbetter .40 goes though the skull. 9mm can catch and the bullet will ride around the skull. Ballistics are just better and with more weight, it should be a better platform. This will be adapted by a ton of police departments due to longevity of pistol’s metal construction.

[@jonah8133]

So does the metal frame give you better shootability over the polymer frame? Or does the flex of the polymer frame make for a better shooting experience?

[@andrewng9977]

I have both the full sized m&p2.0 polymer and the metal, I prefer the metal, to me it seems smoother, and I shoot it slightly more accurately than the polymer. I don’t think there is a huge difference between the metal and polymer, so mostly comes down to the user and their opinions on it. But if you want me opinion, the metal is the better option!

[@DanielG1095]

My first AR was the m&p sport 2 and first handgun was the S&w m&p 1.0, while I got rid of the 1.0, I upgraded to the 2.0 and I love it. Reliable, affordable, what more can you ask

[@0661mike]

I wish they would bring back the rubberized performance center gen 1 back straps to the new line.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@Speckled_trout91]

Love that we have come full circle to where all metal guns is a selling point. My 1911 feels vindicated

[@robertcainjr.7627]

I’m with you on metal. My S&W 645 SS is my shtf gun of choice! Double/single is superior.

[@zero_cool817]

I went to the gun shop to get a shadow systems. My buddy that works there told me about the M&P. I didn’t know they came out with a metal version. I picked it up and I love it.

[@tm71100]

Thanks homeboy

[@GodGunsGills]

Same trigger in the shield plus. I love it!!!

[@greatlakespowerstrokefx4]

I handled one today for the first time. Very nice pistol, trigger is phenomenal and you notice that over travel stop right away

[@willwilliam217]

I held one yesterday, I am a old geezer, engaging the slide stop was a little difficult for me but not impossible,I am sure that I could get used to it. It felt good in the hands. Love my 2.0 m&p shield 45, had the 1.0 m&p shield that I put about $450 in aftermarket parts to get it enjoyable. ( apex duty and carry trigger kit, night sights, hogue grips, mag extensions). That was the hardest gun to rack with the heaviest trigger I still have ever handled.

[@waynebake1123]

Hoping this comes out in the 10mm caliber!

[@Rafal_Wu]

10 mm and 15 round magazine from polymer: )

[@Dietzeeeee]

I am actually thinking about getting this one

[@charlesyoung3879]

Just picked mine up today, what a beautiful pistol, can't wait to get it on the range.

[@quoththeraven7]

they should've made the Shield Plus like this

[@kenf2662]

The Barrel is 4-1/4" S&W Calls it a full size but I think its more a mid size and the 5" barrel being full size and the 4" barrel being the compact.

[@systemuser8701]

I want the mineral rights to that backstop !!!

[@resolute123]

When I saw the promo for the M&P 2.0 Metal I thought it looked cool, but I didn't think it offered anything more the polymer frame does. Went to the local gun store to try one out and I was wrong. It feels awesome. Real solid in the hands and they fixed the trigger; I can actually feel the reset! I'd like to wait till they come out a 5" slide, manual safety, and if possible get rid of fish scale cuts.

[@xb0xisbetter]

Yes, I want all of these things but with the 10mm, since I already have an OG M&P 9 and it has been my bedside gun ever since I got it. Never even tried the 2.0 trigger (I put an Apex trigger in my older iteration). Was the 2.0 STILL bad enough that they had to change it, yet again? I can take or leave the fish scale cuts. I think they're ugly, but they're clearly pretty damn effective. I do draw the line, however, at 1911s with them. That should be considered a crime against humanity.

[@joshuab7737]

@@xb0xisbetter The 2.0 has seen minor changes. The trigger shoe is the big one, followed by the 10* striker. I also believe they have introduced a new sear that has a flatter face.

[@xb0xisbetter]

@@joshuab7737 That doesn't really answer my question. The original trigger was horrendous. Worst striker-fired trigger I had ever felt. How much of an improvement in feel was the 2.0?

[@jamesalbin6194]

Great review and I do like S&W handguns but I don't own very many for some reason. I own Springfield and Walthers and the first S&W I bought was a 3906 and a Bodyguard 380 and a 638 and a 637-2 and my last was the Equilizer and I really like the looks of the one your shooting.

[@Shayla15]

I absolutely LOVE my M&P metal it feels great and shoots great

[@elidiaz9980]

Intro was crazy not missing a single shot target to target 🎯

[@saint474747]

Have the polymer M&P right now. Zero trigger creep and clean break. Now they removed the flex and the mushy hinge trigger to prefect it!! Make a good trigger even better. Anyway, gonna miss the hinge trigger. Can't do the Grand thumb freeze test :(

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁.....

[@Scientist_Salarian]

I’ve been waiting for this M&P for 15 years

[@Blakehenry11]

Never been a big fan of M&P's in the past but I like this one.

[@Rydeman2]

I hope they extend this concept to other models of calibers like 45 or 10mm. I also hope we see the new Shields in the single or double stack in this metal frame.

[@TheMcpvideo]

I definitely would like a 45 with a 13 round mag if possible ✌️

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁 .

[@noquartergiven7789]

4:06 Wow that thing flips!

[@cbwelch4]

I am interested in this gun but must ask if this gun is noticeably more accurate than the polymer 2.0. I guess a side by side comparison would help.

[@blm148]

The answer to the question nobody asked. Never have I been shooting a polymer handgun over 10s to hundreds of thousands of rounds and wished I had a more “rigid frame”

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁.....

[@z0diak08]

Watching again and thumbs up for the algorithm :)

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁 ...

[@BB-yh5rd]

I was never interested in M&P until a dude at the D&B Supply that subtly knows what I buy had me mess around with one. There is no reason I have never looked at M&P, obviously people like them, I just haven't in the same way I subjectively like Adidas more than Nike stuff. I like 4" pistols, I like polymer because it's light, I typically like Walthers and Canik better than other more expensive stuff I have, and this 2.0 Metal just feels right like those do. Plus, it's extremely nice to look at. The good looking factor can't be ignored.

[@haroldfarquad6886]

Seems S&W is finally catching up to us cultured owners of Walter Q4 SFs. I kid. Let's just appreciate the fact S&W is setting themselves apart from Glock in every meaningful way. The new triggers they're putting as stock are such an improvement over their previous gens, and way better than every Glock trigger. At least as far as handguns, S&W is exactly what you want in a company: listens to their customers' constructive criticism and actually delivers a solution.

[@1014p]

S&W has long stood out from Block. It started with M&P series steel sub frame.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁.. ..

[@tomcleave308]

Thank you! Always worth a visit.......

[@bev8200]

I like the melonite finish. So I’ll wait for black. So glad we’re finally out of the polymer phase.

[@lwstruyk]

Agree...Probably the odd ball here, but I do not care for the dull gray finish.

[@whatfreedom7]

My biggest issue with the M&P is also the trigger. I’ve had two gen 1’s. The two issues I have is yes the hinged trigger but the reason is because I have a hard time telling the difference in pressure when I first apply pressure and when I’m letting off to reset which is all the way out on the old ones. The other issue is it was just a hard stiff break also worse than my Glocks,Kahr and my little LCP. The reset was too long for what I’m used to also but I’m more used to Glock triggers.

[@bobbyraejohnson]

Did you watch the video?

[@miragexl007]

tempted. really like the Compact 2.0...Curious if they will be making this in the compact version? I'm not seeing it.

[@millakilla]

Man if they come out with a 10mm I'm buying it.. might even sell my gen 1 full size and get a 9mm too. Love these m&ps. They keep getting better too.

[@fruckles]

Metal frame pistols feel much better to me. Still waiting for the VA to get back to me on wether or not I'm allowed to "touch/own/operate any firearms/airsoft/ammunition" because they don't seem to want to talk. ☕🤔🇺🇸

[@stephenmorris8187]

It's a good thing the VA doesn't get to take away 2nd amendment rights...

[@ronolson2024]

We seriously need a good gun youtuber to compare metal frames against polymer frames. I only have the comparison of a Glock 20 10mm pistol vs. my Springfield Ronin Elite 10mm 1911 as a comparison. Hand down, the Glock has significantly less felt recoil than my 1911 10mm. I believe it is because the Glocks wider flexible polymer grip soaks up more recoil than the skinnier metal frame of the 1911. We need more info on this subject. But in my mind I will not be buying a metal frame anything gun when a similar polymer gun is available. So please help us find out.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁

[@jonah8133]

Agreed, I need the same answer because I'm torn between the polymer or metal version of the gun in this video

[@itmeng]

If they made a shield version in metal, would be all over that!

[@almostontimehero5415]

That would defeat the point of having a small lite weight daily carry. Heavier than a G19 with less rounds? That'd why I havent upgraded from Shield 2.0 to Shield plus. More rounds is nice but why when I have other carry options?

[@Rustebadge]

@@almostontimehero5415 The Shield Plus is nice. Carry one daily.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@itmeng]

@@almostontimehero5415 the S&w CSX (alloy framed) is only an ounce heavier than the sig P365 and for the capacity it’s lighter than the shield plus. With modern metallurgy/manufacturing methods and current design methods you can actually get alloy pistols that are as light or lighter than polymer.

[@TheMike31b]

I need to get this one for just the metal part at the end of the name 🤘

[@warparker8554]

Are the rails in the lower frame the slide rides on, stainless or aluminum like the frame? If they are aluminum, wouldn't the polymer model be better for durability and longevity since it is molded in stainless?

[@AEtrane]

I hope they come out with a long slide version of this: it would become my ghetto 2011.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@jeremiahpaul02]

great review, I recently got one and absolutely love it.

[@centex52]

great video as usal sir, love my M&P 2.0 4.25, this firearm here looks awesome

[@BeyondParadise808]

I got so used to the polymer frame of the M&P. I gotta try that metal frame.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁

[@stevenrhoads4984]

Great video! Awesome M&P! Thanks!

[@lovethehuntOutdoors]

I really like the videos you do and the M&P is my favorite. I have a gen one 40 cal that I love myself. It's the two tone model blued and FDE and I like the way it looks. Just something different with a polished barrel. Hang in there Eric it happens to all of us we will be here when you're ready and able to make another video. Thanks so much I love the New pistol!

[@jwgbmp40]

s&w has realized the increase in sales of their past 2nd and 3rd generation pistols.. they had to change up the poly..

[@Smokem673]

Ima wait a few months and just get the long slide edition..yall know it's comin

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@mariog7554]

Awesome video. I am very comfortable with the regular Polymer M&P PC 2.0 and where the standard trigger breaks, although, I have modified the sights. I saw an M2.0 one on sale in 10MM at the Piggly Wiggly in Chattanooga and snapped it up plus got a free DeSantis OWL holster. Not sure which optics suit me best since I've never used one on a pistol. The metal version would made the perfect service carry. 😀

[@apelnkn2230]

Torn between this and a 365x/xl .... What do we think boys? I have a Glock, Taurus, Ruger,HK already, was looking for a different 9 double stack , the versatility of the sig is leaning me in that direction with the module system/Lego guns

[@watsup9938]

Such a beautiful tool

[@Thisthat1234]

Metal is back and retro rifles are cool. Full circle

[@joehuff4025]

I want one to go with my mod 5906, love the medal guns.

[@GodGunsGills]

Can't wait to find one local!!! I just don't like ordering online! I want to see and touch it before I buy my gun

[@peters303]

Can't wait to get my hands on one and compare it Good job as usual 💪🏼🇺🇸

[@tommycho9068]

Great information. Thank you.

[@alj.granda8252]

Thanks for your review. Excellant shooting. Looks like a great gun. I have the Walther Q4 All Metal, so I'm not sure abut buying another metal striker. The MP is lighter, being aluminum and not steel.

[@timbow50]

So, I’ve got a birthday next week and guess I’m gonna have to make a trip to my favorite mom & pop shop. 3:5 or 4.” is my choice of barrels.

[@tylr3669]

Automatic ammo delivery would be interesting...unfortunately that would mean keeping a card on file with them. And Mastercard and Visa are apparently now tracking all those transactions....so...yeah....

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁..

[@paulgrogan8032]

What a fantastic American made product, expect nothing less from S&W💥💥💥

[@user-vo2cj3fx8s]

I am hoping that he tried to swap the slides and see how the metal frame runs with the ported 9L slide assembly.

[@mikes8948]

Can you buy just the frame and trigger group , and if so, will the M&P 2.0 C.O.R.E. 4.25 slide fit it? Just a thought on a nice two tone option for a few less bucks.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@SuperDancingdonkey]

Backplate is still polymer, can't wait for the m&p 3.1 all wood edition

[@samhendriks1807]

Hi Eric, nice video as always. How would you compare it to the 2.0 performance center ported? You talked about comparison of your 1st gen and the 2.0 PC during your video of the 2.0 PC so i‘m curious how the new alloy one cpmpares to the 2.0 performance center. Thanks man and keep making such videos.

[@funeo618]

Congratulations You've been selected among our shortlisted winners for today's giveaway, contact the info above to acknowledge your prize 🎁....

[@josephpreston3550]

The real OG M&P is the heavy barrel Model 10. Also a very fine handgun.

[@josephpreston3550]

And also all metal.

[@pole_barn_builder]

Wasnt this video posted yesterday?

[@CharlieNylandII]

I love your videos man!