Iron Rhino IR1000

[@GRUBB-MUDD]

thanks for the video, where can I get one and how much?

[@ironrhino2788]

Here is a link to specs and pricing. If you want to move forward give us a call. [phone] www.chipperllcsales.com/2021-iron-rhino-ir1000-mini-skid-steer-25hp-kubota-diesel-1-yr-warranty-w20k%7CKPj.html

[@Will-tm5bj]

0:17 that is a great way to get pancaked by a log😮😮😮

[@kenedylima2268]

What kind of engine does it have?

[@chipperllctrailersandequip4214]

The one in the video has a 25hp Kubota, but we have units with Perkins as well.

[@2wingssamebird314]

I have one and have problems with the track coming off. Any advice?

[@ironrhino2788]

The first things I would check are track tension, the terrain you are working on, and check for any damage to the track that may cause it to come off the sprocket. If all those things look good, you should check the alignment of your rollers, and the wear on your sprockets. Running into hard surfaces like curbs and large rocks could cause damage to rollers and over tensioning of tracks can cause the sprocket to wear faster, both of these things could cause tracks to come off.

[@dexterquincy1]

I think you could use a little more counter weight on the back of that

[@ironrhino2788]

The counterweights on the machine are the max.

[@dexterquincy1]

Do you have any dealers in Canada

[@ironrhino2788]

We do not have dealers in Canada. We are located in Cumming, GA.

[@ZR1Terror]

Is there a dealer in South Texas, way south by the border, for service and parts?

[@ironrhino2788]

Our only dealer is in Cumming, GA, but I recommend you check out our FAQ page for some detailed answers iron-rhino.com/faq

[@cartersmith9433]

My boos has one and it will pick up anything as long as it doesn’t tip or break

[@lucasholmes6410]

Does that mean it tends to tip or break down?

[@reececook8606]

I’s it compatible with a pipe puller/vibrating head for irrigation?

[@ironrhino2788]

It is compatible with dingo/mini skid steer attachments that don't require a flow over 12GPM.

[@kaili7870]

How much you estimate that long to be at the beginning of the video?

[@ironrhino2788]

The grapple is a 48" dual cylinder CID grapple. The grapple looks to be about 1/3 of the length, so I would estimate around 12 feet.

[@nesc39]

When he is raising the log, i’d that pump stalling out for s second because it doesn’t have enough power or is he letting off the control?

[@ironrhino2788]

He is taking it slow lifting that amount of weight. As you can see in the next portion of the video, that much weight being held that far out makes the machine a little tippy. He is operating slowly and safely through the weakest portion of a machine's lift cycle, while still showing the full capability of the machine.