Will It Go Faster With A Small Block Blackjack 24 - RC Boat Brushless Motor Swap

[@marcandreasson87]

Great vid B. Appreciate you doing a lot of editing in this and others to give your subscribers a better picture.

[@paulcooper7162]

😂👍 good to see someone else trying crazy setups it's a great help when you do tests like this

[@IRONCLADRC]

Thanks you. 😊

[@brianbrissette9444]

Like seeing you here PC, I have lots of planes and cars 🚗 just getting into these boats... I bought a tfl Genesis from hobby king over 2 years ago with all the electronics just now building sr80 fto11 also

[@paulcooper7162]

@@brianbrissette9444 Hi Brian nice one 😊👍 that's awesome give it all you got,put some vids up people love them

[@garrettkifer8332]

She's scooting! This is definitely the fastest Blackjack 24 I've seen!

[@cflchurch2526]

Damn that red rocket!

[@gillian9178]

You need to rotate the water jacket on the motor so as the water barbs are nearer the top of the motor. Where you have them coming out the side of the motor the water jacket dosn't fill completely before water starts exiting the jacket. It will run cooler with a full water jacket. Heads up on the TP motor sizing, TP size their motors different to some other makes of motors. The 3650 on the TP means the motor is 36mm diameter but the 50 is the length of the rotor/stator inside the motor, the stock blue motor is sized on o/d of the motor x length of the motor. The rotor/stator in that motor is only around 30mm long, which is one reason its not very powerfull.

[@brianbrissette9444]

Good information 👍

[@strexttp]

Nice toy

[@jacobfolkringa8676]

Love the videos man!!! Are you able to leave any of the links for some of these motors your testing Building a proboat steath wake Looking for a good reliable set up

[@maximumthrottlerc5939]

Just put this Rocket motor in my BJ 24 hull with a 90amp esc, the BJ 42 stock prop on the end of the shaft, and powering it with a 4s 6000mAh Lipo battery. Speed run test is tomorrow :) Hopefully I'll hit that 55+mph mark as well. Good stuff brother!!!

[@IRONCLADRC]

Oh man good luck. 50 knots & no smoke c'mon. Watch Temps with the large battery (weight) tfl 438 prop is a great choice for that set up. Let me know how she did tomorrow

[@maximumthrottlerc5939]

@@IRONCLADRC will do brother!!!

[@maximumthrottlerc5939]

@@IRONCLADRC - got rained out before I could test so next week or sooner pending weather here in NOLA... and I will let you know how it went. Thanks again!

[@rcgrigs9391]

Would u happen to know what size o rings are in the stock motor water jacket one of mine was missing out of the box

[@IRONCLADRC]

I'd just loc-tite the nipple on the water jacket. Probably 3m o-ring

[@rcgrigs9391]

@@IRONCLADRC it not the nipple it's the o ring that goes inside the water jacket that slides over the motor

[@robm.6825]

Is that a 2968 motor? I searched 2868 and nothing comes up, but 2968 does. Thanks man.

[@IRONCLADRC]

Rocket 2968 www.ebay.com/itm/184330669879?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=OgGNXJA1R0C&sssrc=2349624&ssuid=nvlorxlssn6&var=&widget_ver=artemis&media=COPY

[@tomminella6036]

hey what pop size u using ? sweet boat,learn alot bro , newbe here

[@SuperVanz26]

Can we have the link for the rocket motor 2868

[@IRONCLADRC]

www.ebay.com/itm/US-SHIP-SURPASS-Rocket-2968-Brushless-Motor-Water-cooling-Jacket-for-RC-Boat-/184501957853?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@robertpawlusiak]

Hey where do you get the Teflon Tape for the Bottom of your Boat ??

[@IRONCLADRC]

Teflon tube? If so then I got it from OSE offshoreelectrics.com I upgraded to .150 cable and 3/16 shaft. Hope this helps

[@IRONCLADRC]

How's the Blackjack running?

[@bobmorris4401]

Great video...I have a traxxas blast can your recommend a brushless motor that would fit in place of stock brushed motor? Been sitting on the shelf way to long

[@IRONCLADRC]

Any 36mm/540 size brushless motor should do the trick with water jacket and watercooled esc

[@bobmorris4401]

@@IRONCLADRC thanks...got a sonic wake awhile back...fun boat looking at others to add to the fleet...thanks again the blast should make a fun project

[@isaiahfurrow7414]

@@bobmorris4401 how do you like the Sonicwake? I'm considering that as one option for my first boat...

[@bobmorris4401]

@@isaiahfurrow7414 it's fun for sure...my first really fast electric. ..the self righting is amazing. ..lol

[@samuelbrown9574]

Is it handling all that power with the stock flex shaft?

[@IRONCLADRC]

I broke 1 stock shaft with a large prop replaced with another stock shaft a year ago, holding up so far

[@ledwin8770]

I'm pretty new to the RC boat game so I don't really understand, the difference between a four pole and a six Pole motor! what are the differences and is there a benefit from one to the other?

[@IRONCLADRC]

4 pole have 4 magnets on the rotor 6 pole has 6... 6 pole I believe, some one can correct me if I'm wrong. 6 pole has more torq = fast acceleration 4 pole less torq but higher top speed. KINDA sorta 😅 in short REAL SHORT hope this hells

[@ledwin8770]

@@IRONCLADRC thanks for the reply it really helped to clear a few things you for me👍

[@Sweetaccord]

@@IRONCLADRC That's correct. Also the difference will be how many amps they will draw.

[@wheeliegriff777]

man that's as fast as its big brother

[@ryandakar2956]

sorry friends, what do you think for the motor size 3660 _ 4300kv VS 2868 _ 4000kv for the superior speed which one?.

[@IRONCLADRC]

If your wanting to run 6s go with the 3660 if your looking for high rpm on 4s go with the 2868

[@ryandakar2956]

@@IRONCLADRC but here the series is 3660 max voltage 14v, can it use a 6s battery?

[@shannonoshea644]

Such awesome videos man, and great to see a good rc channel with tips and info keep it coming dude ! Not sure if you know about them but offshore electrics somewhere in the U.S sells some really good stuff for boats pretty much anything you need and if you ever get into gas boats check out Bonzi sports and zippkits. The higher discharge (C-rating) definitely helps with the punch haha

[@IRONCLADRC]

I recommend ose to all thanks

[@LandenDenham]

Not a boat guy but good video!! 👍

[@IRONCLADRC]

Thanks brother! Thanks for watching

[@mildtowildrc7343]

I got a few shockwave 26 hull and canopy’s brand new and an Older TQD 1/5scale hydroplane twin electro that I want to see what you will do to❤️👍And a bunch of other goodies for you and you will love the Hydoplane

[@IRONCLADRC]

Awsome. That sounds awesome. I will send you an email.

[@IRONCLADRC]

Just sent you an email. Thank you 😊

[@Mad.Man.Marine]

I love that you are changing stuff and trying new stuff. But shimming that collet defeats that purpose of using a collet. Collets are used because they are perfectly centered and can also grab a flex shaft. When you shim it with a very very loose fitting shim. It sends it all out of wack. You can hear it when you run it up out of the water. You are scrubbing speed loosing it to vibration abs heat. And it’s also gonna wreck the bearings and flex shaft.

[@brianbrissette9444]

Ok it's not ideal but has given him a place of reference, it's just a 50 ft busrt...

[@brianbrissette9444]

3:45 acknowledged this is far less than ideal and yes I most certainly heard a horrible vibration apon run-up while still on the bench

[@marknickells6097]

THE 3650 Stock motor isn't wired for 4 S. Your batteries simply have ascending C ratings and more capacity. "You're super charger is the 4000 KV. motor. " That's your speed. It's double the output of your stock motor. What I've done, is run a 3000 VV. motor, 120 Amp ESC. and ran both a Prather and Grim Racer prop. Stock for me is an Octura 438. AND getting just about 45 m.p.h ALL 3 props balanced , and or sharped. THE 4000 Small block, is a killer upgrade,. and definitely a keeper. Side grade, and what I would do, is to change out the rudder and replace it with a dual water pickup. or add an additional , inline pickup, and separate your water feeds , to run the Controller and engine separately. AND finally , change out to ESC 5 connectors. Putting some weights forward, will also help prevent blow-overs. (Done that) Happy racing. P.S, love my Black Jack.

[@IRONCLADRC]

I ran the stock motor on 6s the other day no issue

[@IRONCLADRC]

My top speed with the blackjack 24 is 63mph

[@marknickells6097]

THE getaway, was the smaller 2850 , it will run cooler than the stock motor . I have seen people shove 8 S into the boat, and all sorts of bad things to follow. Blown up ESC'S , and battery cables catching fire. THE spectators thought is was cool. IF not costly. THE boat hull wasn't designed to go that fast. HE blew it over twice, before flaming it. THE guy, didn't seem too concerned. I think you and I like our "Need for speed." AND with that big motor,. YOU got a major ride. Imagine , your boat a Go Kart, rolling up to a Top Fuel dragster. YOU win! What prop did you end up using with the 6S? Just curious.

[@IRONCLADRC]

My set up when I hit 63 was...... 3665 2100kv turnigy 90a flycolor with a tfl 438 prop I usually get 59 - 60 all day long with that set up 63 is my pb. Oh yea I blueprinted the hull (sponsons)

[@IRONCLADRC]

I was just playing around with the stock motor on 6s. Here's the video link lol. You might get a kick out of it. I was littery trying to blow it darn 3650 up. Like I said I was just playing around so don't judge. Lol kzbin.info/www/bejne/q4SXi2SFjL2BiK8

[@marknickells6097]

THE Turbo Boost was the 4000 KV , (4000 PRM . per volt. ) which is why, you got yourself a sleeper on 2S . , and 30 MPH . Which , the stock 3S configuration , gets you , unless you prop up.? 50 MPH. ? and then above? YOU were playing in the "Big Boats club. Wouldn't it be embarrassing to roll up to an M41. and smoke em' Your right at Miss Geigo, and a stock U-19 , or a Velos 29. 50-55. ? Too much fun!

[@IRONCLADRC]

Nailed it

[@sebastianobeltrami8742]

Hi man, great video. the original motor is not that great, maybe 800 watts ... maybe. What you put on 1400watt should be but it can handle if I'm not mistaken at most 4s. So it's great for 24 ". I think even a 1200watt can work but in all cases you have to have a 90 esc at least plus a 38mm diameter metal propeller. I think it's a great recipe what do you think?

[@IRONCLADRC]

Yes sir 90a with 2868 4000 is perfect. 38mm prop is what I'm getting my best speeds with! Blackjack

[@sebastianobeltrami8742]

@@IRONCLADRC thanks man at the next from Italy

[@willon1206]

Where do I get motor lol

[@IRONCLADRC]

Ebay. Rocket 2968 4000kv

[@willon1206]

@@IRONCLADRC damn that was fast, thanks dude sweet boats

[@stevenvaccaro6132]

The 28mm motor is longer than stock 36mm, so the power should be equivalent.

[@IRONCLADRC]

I was surprised to see the little 29mm out preforme the stock 36mm motor. Thank you for watching IRONCLAD RC.

[@stevenvaccaro6132]

@@IRONCLADRC Check out the data sheets, they put out about the same watts.

[@marknickells6097]

I've tried to Email You, directly , and unfortunately your Email bounces back. So, I am not sure, How am I supposed to contact you? Regarding business.

[@IRONCLADRC]

I got your email. Thanks you