Is BMW Fuel Level Strip Finally Fixed For Good?

Finally, a permanent fix for the dreaded BMW Fuel Strip Sensor?
This video is a follow-up to a video I made a few years ago documenting the fuel level strip fitting procedure.
You can find that video here: • BMW Motorbike Faulty F...
Shortly after making that video the Genuine BMW Fuel Strip failed 🤬
Hopefully this time it's a permanent fix 🤞
This is the part fitted:
www.fuelsensortech.com/
► SUBSCRIBE: goo.gl/3Qdd2o
► FACEBOOK: www. ...
_______________________
Get early access and bonus videos by becoming a PATREON
► PATREON: / superbikesurgerytv
_______________________
► OFFICIAL MERCH: teespring.com/stores/superbik...

[@SuperbikeSurgeryTV]

Hi Guys, You're not going mad! I had to upload this one again due to some technical gremlins.

[@flexjay87]

Well, i have to disagree, cuz i am going Mad ! :)

[@TheChristianp73]

Salve io portando la moto in officina e facendo montare la striscia non riescono a calibrarla

[@kallekula74]

I have had mine installed 6months ago and it is working fine

[@larrylarry1206]

Thanks for doing this. I was a bit concerned after trying to decipher the installation instructions and the wiring, but it is really clear here and I will go ahead an install mine on a 2008 K1200GT.

[@ermesborgnino4704]

Would very very much appreciate your impression about the reliability of the solution after you install it. i had the same gage issue with my 2007 K1200GT, and am considering installing it on my bike as well. Tired of using the trip meter.

[@johnpollock4257]

Great information 👍

[@HonYacz]

Just got mine and installing....thanks a lot with the wire help :D

[@KevinMcMillan]

I also agree PETG is not the best to 3D print from they are better plastics to print from.... leaving the pins sticking out and asking you to chop them is a bit lazy of them. Lots to improve on but if it works happy days!!

[@SuperbikeSurgeryTV]

My thoughts 👍

[@JoaoPedroSobral]

@SuperBikeSurgery thank you for this great video. I have order it to install on my bmw r1200r (k27). I will be using motoscan for the fuel calibration, nevertheless I was trying to find your video on how you did. Can you link it in the description? Thank you!

[@user-jw9yh8tb6v]

My local US dealer has an updated BMW version (different p/n from the original). With tax as of this writing (Feb '24), about $300.

[@jeanpaulcomeau8131]

Tks for the tip

[@raunosateri3711]

Great. My friends R1200GSA year 2010 has some 40+ tkm and just the fourt stripe broke down. He's a litle bit tired to change the fifth stripe powered by BMW 😂 Have to discuss with him. Have a great driving summer!

[@verticalgyno]

video and subtitles works fine Ciao ;)

[@markb77]

Hi loved the video about the replacement fuel strip for some reason the web site doesn’t work for me have you any contact details as I won’t to ask about a strip for the GS 1200 if possible. Regards Mark

[@DavidWatson-lz8on]

Hi, do you have any more news regarding this fuel strip?

[@1745vlad]

Hi! Thanks for sharing this information! I did try to go on their website, but can’t read a word in Spanish, can you please share link where you can order it. Thank you again!

[@angusmitchell9804]

If your using computer There is a translate option on your search engine

[@angusmitchell9804]

Does the engine have to be run ning when you pull the clutch in

[@BrandonSalas-us8mm]

Can you kindly tell me what the line from the tiny hole in the fuel filler that goes around the cap to anlong fuel line with a hose clamp on the very end but no evidence of where that goes but even more importantly, how do I run the vacuum line from the fuel pump to? Where does it go? I have it spraying gas. I sprayed my bike in gas twice.

[@terrydodds919]

Is there any update on the fuel sensor? I just ordered one today. Wondering if the bike is still displaying correctly.

[@keithduffy1744]

Hi, I followed your video (excellent by the way) and ordered the new Spanish fuel sensor strip , fitting went well and after holding in the clutch for 20 seconds all well. next step was to re calibrate with the Unicarscan UCSI-2100. However I can not download the app to my PC but can to my android phone and when wanting to buy the app the site will not accept my post code. Any advice, Kind regards Keith. BMW R1200 RT 05 year and 60+miles. cheers.

[@JoaoPedroSobral]

Were you able to do it with the motoscan ultimate version ?

[@keithduffy1744]

Yes all good thanks.@@JoaoPedroSobral

[@Desertduleler_88]

The problem with modern equipment today is it’s dependency on electronics, which sooner or later is bound to fail due to out sourcing of cheap electronic components from China.

[@keithmoore3983]

Hi mucker were can I buy one of them fuel strip from .bmw are so expensive

[@pollcrazy]

Did it solve the issue?

[@geraldolanzero241]

So what is the hand computer you are using to calibrate?

[@BrandonSalas-us8mm]

Gs 911 hex code

[@keithmoore3983]

Hi matey whats the site called on were i can purchase a fuel strip. I cannot find them anywhere.

[@SuperbikeSurgeryTV]

The link is in the video description.

[@TheChristianp73]

Ma la calibrazione deve avvenire con la striscia nel serbatoio o o la striscia fuori dal serbatoio

[@ianstewart576]

That's alright then.

[@MrNiklas1967]

Hi

[@raunosateri3711]

Is the fuel stripe still working? How long time you have had it in use now?

[@SuperbikeSurgeryTV]

Still going strong, must be a couple of years 🤔

[@MrThunk123]

darn it, sold out already! but the page shows their place is in argentina, is there somewhere else in spain to find them? did i miss that..

[@MrThunk123]

Actually it turned out to be in Spain and easy to purchase for me here in Sweden, I’ll check back once it’s installed

[@kallekula74]

Har du bytt din givare än?@@MrThunk123

[@ermesborgnino4704]

@@MrThunk123 So, did you install it? How did it go? Any feedback about the strip and whether or not it's fixed your problem?

[@MrThunk123]

@@ermesborgnino4704 yup installed and working, it seems ok

[@ermesborgnino4704]

​@@MrThunk123 Thank you for responding!! Very glad to hear it. i'm not sure i could do the job myself, so i'm going to have a shop do it for me. Sounds like it went well for you.

[@niget3741]

I'm on my 2nd strip from these guys. My 1200 GSA works fine until it's gets near the bottom of the range then throws a fit and shows half a tank on the gauge. The guys developing this product are trying to find out why it's doing this. Let's see if they can fix it.

[@markb77]

Has anyone any contact details for these guys

[@angusmitchell9804]

Have you had any feedback from the developer

[@niget3741]

@@angusmitchell9804 Hi Yes the developer hopefully will be sending out a new modified sensor in a couple of weeks.🤞

[@ermesborgnino4704]

Please kindly provide an update regarding your experience with the seller and the product. i'm considering buying their strip and replacing mine. My strip has been replaced 3 times and i'm sick of it.

[@niget3741]

Well, it turns out that if you have converted back to a fuel float you can't go back to a fuel strip, well not from these guys anyway.

[@BrandonSalas-us8mm]

How much is the sensor my bike not trust worthy ive ran empty with 70 80 miles left allegedly going up hill i think i noticed

[@robellwood2695]

Curious if this is still working

[@SuperbikeSurgeryTV]

Still working 🤞

[@uwew333]

Is this part available in the USA? The domain seems like o have disappeared and I can’t find any further info via Google. Any pointer/help is appreciated.

[@TheChristianp73]

Salve la mia non si riesce a calibrare bmwr1200r 2008

[@justme197511]

Built-in obsolescence, bloody shame BrokeMyWallet wont honer, or recall to fix fuel strip problem. Why would anyone buy a new bike to experience the same problems.

[@flexjay87]

I have been riding a motorcycle since the 1970's, and as time goes on, i am Not impressed with anything that comes out of Germany when it comes to modern Autos or motorcycles.