Is Breaking in your Hemi Overrated? The truth about Engine Break In

[@RacerX9]

I hope this helps to clear up some confusion for many people out there. Here is the link to Dream Giveaway: Use my code RacerX Super Bee: www.dreamgiveaway.com/tickets/superbee?promo=RACERX 2018 Demon: www.dreamgiveaway.com/tickets/srtdemon?promo=RACERX

[@haroldbirge6881]

🏆Racer X🏆when are we going to see your ⚡new toy⚡ 🍀Get R Done😎✌️

[@haroldbirge6881]

🏆Racer X🏆 it's Friday night👀the beers ice Cold and the women are wild🤘 when is the 😈demon coming out to🍀 play 😎✌️

[@easy6427]

Even if the importance of the break in period is overstated, it seems like it would be foolish not to do it if there's even a chance it increases the longevity of the motor.

[@NXT_LVL]

We've gone from Iron Block/ Head with tolerances you can drive a semi through to Aluminum block/Heads that you need 0W-30 weight oil for starting. My Grandfather remembered you started with very thin oils with the Model Ts, then by the 4th year you went from Kerosene/Lamp Oil to Syrup (as viscosity wise) becuase of the wear in the cylinder walls etc

[@rustyshaklferd1897]

100% agree, but I struggle with addict behavior and really really struggled to go easy when I first got my hemi charger. The one I have now I paid for in full, so what I break will cost me but I can’t help myself. The throttle is an on off switch as far as I can see. Especially considering I already bought new tires and need to get rid of the oem ones before removing them. I’m not wasting good rubber.

[@easy6427]

@@rustyshaklferd1897 oh my damn, when I first got my 392 charger a couple of years ago, I struggled HARD to keep it chill until I hit 500 and then 1000! I live about a mile away from the highest speed limit highway in the country!! By the end I was like Pookie from New Jack City.... it just be calling me!

[@EmEs1018]

@@rustyshaklferd1897I feel you on the addict behavior struggle.. I’m the same way. Love my V8 Charger!

[@MichaelSmith-kr9qw]

Break in is always important, I usually give my vehicles 500 miles of light to moderate throttle, and allow them to come up to operating temperature before even attempting any spirited driving.

[@jayw.6307]

I did the exact same thing. Read the manual took it easy for about the first 1000. Runs like a dream.

[@NXT_LVL]

Yep, come up to operating temperature is the key part. I recently bought a UltraGauge, plugs into your OBD2 port, and can read the sensors of your vehicle via the PCM. Coolant Temp with an actual number, Timing, O2/Fuel trims, TPS%, MAF, intake temp, etc All for like $100

[@josephgreen2956]

Man, I am so happy for you knowing your car finally showed up. Was praying 4 U.

[@RacerX9]

Thank you my friend... I appreciate that

[@ardelld8465]

I have always break in my new Challengers engine. I read the Owners Manual to make sure what I need to do. I was told that your warranty requires it. Thank you for this great informative video RacerX.

[@tundrawhisperer4821]

How would your warranty know you did it or didn’t do it? 😂

[@NXT_LVL]

Gone the days of 7yr/70k and 10yr/100k

[@NXT_LVL]

wear pattern, heat, etc Just how companies can tell if the valves hit the piston top in all the cylinders that = an over-rev situation. @@tundrawhisperer4821

[@ardelld8465]

@@tundrawhisperer4821 The computers in the car is where the information comes from. The dealership service dept does this.

[@ardelld8465]

@@NXT_LVL yep.. My Hellcat has 3 yr 36k miles which ever comes first.

[@tamestang]

I just broke in my rebuilt 6.4 hemi in my truck by getting the motor to full temp, let it cool off, then I took it out and got into it pretty good during the first drive to seat the rings. Then changed the oil after 1k miles. Been great so far.

[@bigb4279]

Heat cycles is very important. little things like starting it for a few mins then turning off is bad. always let it heat up to running temp before turning off.

[@erichill262]

💯 Truth. This is exactly what I learned about engine break in when I got my first brand new car. It makes complete sense. It baffles me that people actually rip on brand new cars right off the dealer’s lot.

[@stand9460]

Excellent advise especially for the naysayers. I’m currently in break-in period with my 2023 Challenger Scat Pack Widebody (280 miles so far) and following the manual instructions. Will be adding a catch can after 500 miles and other mods after 1500 miles.

[@Ramblequist]

Having torn down these engines after 60+K miles, a catch can is only a show piece and another headache to remember. Get one if you want, but unnecessary , this is not a DI car.

[@HollaIfYaHemi392]

​@@Ramblequist exactly

[@nathanmerrill9782]

I prefer to purchase new (usually custom order), as with my 2021 Charger ScatPack Widebody, to ensure that the break in period is done properly. The owners manual outlines the procedure for the first 100 miles, 100-300 miles, 300-500 miles and up to 1500 miles. Having followed those recommendations, I'm looking forward to a long-lasting relationship with my dream car.

[@destineesdaddee4474]

I think I screwed up my break in period.... Im on 2100 miles on a 2023 charger WB scat pack.. I wasn't informed about the break in... So I don't know how it's gonna hold up down the line 🤦🏾‍♂️

[@OhanaVibes76]

Just in time, getting my 392 at courtesy next week

[@kz6fittycent]

I spoke to a machinist about break-in and he gave me the skinny on the why's and how's: 1. The rings need to be tempered during the first few miles (literally the first few), then take it easy for the remainder of the break-in. 2. Higher friction during break in leads to higher heat, so varied throttle helps to load the engine, seat the rings, etc. 3. Then deceleration helps pull oil under the piston skirts and cool them down. 4. Drop the break-in oil, cut the filter open and check for metal in the oil and in the filter media. 5. Drive "normal" after the break-in.

[@bullittboost6046]

In my experience it’s good to break in new motors.

[@randshelton9588]

As with most people here agreeing with a break in period.. every new car I have ever bought was put through these same points. I remember one even stating in the owners manual to avoid using cruise so you can get varied engine and transmission speeds. What scares me is if you purchase a used vehicle you really don't know how it was treated unless you knew the person first hand. That's why I ALWAYS purchase and extended warranty..

[@el-dete]

Bro, I was at that same dealer 2 days ago and I saw your car covered and I thought it was weird. I knew it was a 170. And now I see your video and I find out that it’s yours. Congratulations.

[@MechanicalMind83]

Can't wait to see the unveiling of your demon 170. Break in is very important on any new vehicle.

[@artlife6210]

The higher compression and cam lift/spring pressure of a HP engine makes break in much more critical, also oil changes at 100/500/1200 miles has always been my goto, never had an engine fail in 40 years using this simple methodology. 20 minutes of cam breakin @2000 rpm, then 100 miles of light throttle varied rpm, 400 at a bit more heavy throttle, then 700 @ normal driving staying away from redline.Roller cams are more forgiving, but I do this process anyways because a little time is cheaper than roaching a cam lobe, bearing or ring by being in a hurry, a great useful video here X, cheers!

[@TheSpeedDemon64]

I’m so excited to see your brand new Demon 170!

[@jaybman2700]

So you’re telling me that hundred yard burnout💨 I did out of the dealership was a no no,lol with that said, I can’t wait to watch this demon 170 it’s been a long time coming. Congratulations again!

[@countrymorgan2942]

Imo long as not pinging it off the limiter and below 5k no worries

[@RacerX9]

lol

[@Alteris85]

As a person who rebuilt many of engines I highly recommend breaking them in to make sure the rings and everything is seated.

[@brianenochs]

My 2023 Ram TRX was broken in by the dealership porter who took it to the gas station to fill up the tank while I was doing my paperwork 🤨 truck had 18 miles on it and top speed recorder was 107 MPH... You'd think he would have been smart enough to reset it...

[@NormalPower7291]

Congratulations on the 170!!! I'm excited to see you get you car. IMO you are the right youtuber to get a Demon 170. It'll be in the right hands for sure! Thanx X

[@Oliver-ft2fq]

I’ve seen some people who went WOT off the car lot and later the car has issues then the dealer would also blame it on the break in period.

[@paulbutz8292]

As a diesel technician and an owner of a 04 SRT 10 with 150,000 miles I can agree with you on everything you covered, thank you and this only applies to owners, since thieves won't care about the vehicle after they abandon it lol.

[@michaelmartin5869]

I broke my Scat Pack in per owners manual which was a 3 step process and it made a huge difference.

[@canny8228]

I broke in my 2023 Charger about this way. Short trips, moderate throttle, etc. I probably didn't get to 4500 rpm much, but I didn't punch it too hard. I didn't do the first oil change until 3000 miles, but otherwise kinda followed this model.

[@SovereignKnight74]

So stoked for you! Dodge Demon 170 bound!

[@bdogjr7779]

AwesomeX《☆》White looks good on Chargers. Great advice Brother. I guess the Tennessee PoPos broke in my Charger Pursuit properly. It's still running great with almost 116K miles & 8000 hours engine time✌🏼😎☯️

[@DefinitelyNotYouThankGod]

Both my Trackhawks, Hellscats and Scats… change oil the 1st time at 400mi. I never push the peddle more than 1/4th throttle.. NEVER wide open.. my Trackhawks both did 3.1 to 60mph… I had a friend to beat the crap out of his from day one.. his only did 3.9 to 60..

[@tombehmlander7241]

Getting your Demon!! Finally 😀😀😀😀

[@dougpendleton1266]

Congrats on your upcoming delivery!!!

[@ChallengerRT1999]

I have been following racing x for a long time and I have finally got myself an R/T challenger and it's awesome I just started uploading videos to KZbin I'm new but racing x is my role model

[@ntelly9979]

Thank you for this much needed information, I’m going to follow your tips with my brand new black top RT.

[@williamkearns9098]

the only thing that stood out to me in this video was: or even a Demon like mine, sitting in the showroom over there! cant wait for the video.

[@HeemIntrovert_Prout]

I really appreciate this video. I broke in my scat pack and she is amazing!!

[@thefreshprinceofgreenhills]

Congrats on the new Demon X! LFG!!

[@rickdavis3918]

I’m a true believer in break-in periods. I cracked a ring on a new high horse powered car that had only 240 miles. And it was started 😢consuming a quart and a half every 1000 miles.

[@ZennyOG]

this is exactly why I’ve been waiting for you to get your demon he’s actually gonna take care of it just like they did in the old days

[@ZennyOG]

recaro seats in that mango orange oh hell yea

[@ZennyOG]

your demon may be the only one to make the 8.9 because of the break in

[@SRTSTEVEN]

I’ve broke in my motor in one ride when I picked up my jailbreak with no markup from OK to CA, it was a 20 hour drive.

[@patrickciarcia4100]

Always great videos… so excited for you on the the DEMON….give a long video on it… 👍🏻😎🇺🇸🇺🇸🇺🇸

[@peterkovacs8654]

Demon 170 break in is a video in and of itself, take us along for the ride

[@axeldavis5827]

Ordered my scat and it showed up January. Since then I’ve only put 750 miles on the car but not because of the investment but rather my love for it and I want it to be around when I retire in 50 years. I’ve had it in sport almost the entire time. Never above 4,500 RPMs. Oil changes get done at 3,000 miles or 6 months whichever comes first and because I knew when exactly my car was built to the day I started from the day on. I solely believe that when they are brand new you should get the oil changed after the first 500 due to how important that first few hundred miles are then again at 1,500 however if your like me and barely drive it then you’ll be just fine at what I am doing. Also keep them stock until you hit atleast 1,500 miles.

[@EmEs1018]

Great, thorough content. Props to you for all the well explained information! Love my ‘23 RT!

[@fluxcapacitor9867]

After decades in an auto machine shop & building the motors , I’ve always held to the moment it first heat cycles it’s done , but chrome or plasma moly rings need quite a bit of heat & take longer to “seat in”. I’ve got 300 miles in my 2 Mo old 1320 & after 8 miles it was game on , lol on it as I think babying it is bad. Come on Friday !!!!!!! Your 170 ❤

[@sleeeper88]

People that build engines understand this people that don't have no clue.

[@crankshaft-rf1nh]

I've built several engines, broke them in how I was going to drive them, never had issues as long as you change oil and filter a few times in the first few thousand miles. Always use nothing but Castrol oil and Fram filter, never had any issues...

[@davea4037]

Glad u included the break in oil change too!😊

[@tommc3622]

I keep the coolant gauge in my center display. Performance pages are slow to load, and the built-in doesn't register until 170°. I don't start moving after starting till I see 100°.

[@user-ex9zm7bg3x]

right on I have coolant, oil and tranny temps all up on the performance page home screen

[@lemmingfiftyone]

9:24 re Sport mode - In my 2023 Charger R/T (5.7/345) the Sport mode was "crippled" for the first 500 miles. Selecting Sport mode it would open the muffler valves and set the steering for sport, but the engine and transmission would still use MDS 4-cyl mode and short shift. At 500 miles these restrictions went away and I got full Sport mode. P.S. the manual specifies break-in procedures for the 6.4 and 6.2 engines, but for the 3.6 and 5.7 it says no special care is needed, not even an oil change until 10k miles. No way I was waiting 10K for the 1st oil change.

[@RacerX9]

Yes I saw the manual for the SRT hemi's .. funny because all the engineers will tell you to do it exactly like I was mentioning. I'm referring to performance engineers across the board. It's like don't go over 55mph for the first hundred miles.. which is funny because it has less to do with vehicle speed and more to do with engine rpm. Go figure

[@kenb.8596]

Knowing a bit more about engine oil lil bit more then the average dog, I’ve been in the auto parts business since 1975, just got my 2023 Scat Pack, back in July, & did exactly what you’re describing, referencing oil, I have a close friend that is an AmsOil distributor, & long story short, I put 450 miles on the car then changed out from factory Penns, to AmsOil, 0W /40, living in Florida & monitoring the heat coming off this Scat Shaker, was off the wall, hence the reason I swapped out the oil in a hurry, my friend turned me on to the testing of most major synthetic oil companies, and testing was unbelievable on the Amsoil, the AmsOil blew away all competition in the roller-bearing test, the heat test and also the cold test. I’ve been using AmsOil in all my vehicles to include my 3 air cooled Harley Davidsons, again the heat reduction was anywhere from 13 to 20% cooler, due to less key word (FRICTION). I’m retired out of the automotive parts business, but as per this video thread, spot on with the babying for the first, 500, to 1,500 miles is a blessing. Gr8 video!! Also I haven’t done any mods yet, I still only have 450 miles on the car, I did finally locate ceramic front brake pads for the widebody scat pack and replace OEM, dust makers. 6 piston Brems, What a brake pad residue difference!

[@Maarrtinn]

sometimes i do the turn on and go right away because of how loud it is & im just tryna get going lol

[@jamesmyers9285]

I wish you would have shown more of the exterior of your new car. Love the Color combination especially the Bright Wheels which set the car off far better than Black Wheels.

[@ernestomorales2487]

That's so true my friend! That's for all the animals out there to learn something proper.

[@NXT_LVL]

My Dakota was "No WOT in 1st gear for first 500miles; vary speed and RPM" My Moms 2019 Ram was the same but for 400, my Dad's Santa Cruz was "No high revs for the first 300-500 miles (4000+)" Have to let the rings, seals etc seat and let it start a decent wear pattern. But it really the MAINTANCE that makes the difference for longevity. Thats why some gas engines last for 40k miles and some for 200k+.. not all are sleeved blocks like a diesels that you can tear down every 350k miles

[@LUVBYFEWHATEDBYMANY777]

Great truth informative video that is needed 👍🏽🎯💯 Dejavu from when I did the engine break in procedure ( per manual instructions )on my 2021 redeye hellcat challenger . I drove over 30 miles back home from dealership doing 55mph in the far right lane🤣😆😂🎯💯🫡

[@KarlBuckley-bw3vc]

I always start my scatpack and start driving right away, but I try to stay at 2k rpms, and don't go over 3k rpms until I've been driving for at least 20 minutes. I don't like to just sit in idle because the 392 Hemi's are known to have an oiling issue at idle in the bottom end. I like to keep the rpms around 2k until warmed up to help fling the oil around. Aparently Dodge cop cars have a tendency to wear out cams because they sit idling a lot of the time.

[@haroldbirge6881]

🏆 Racer X🏆🍀 you're the man😎✌️

[@calilife221]

The dealer looked at me crazy when I took my 6.4 in for an engine change at 500 miles lol never going back to that dealer

[@kirkkarnage6344]

The don’t go over 70 mph during a break in is not bs. It is in the scat pack user manual that during the break in period do not go over 70mph.

[@user-ex9zm7bg3x]

yes in fact it says 55 mph for the first 100 miles

[@kirkkarnage6344]

@@user-ex9zm7bg3xyes you are correct it does say that and much more! There is long step by step break in guide. This man is clueless.

[@brianv.1300]

Dont totally baby vehicle but dont rag on it (rings need seated sooner than later). Warm car up, vary throttle keep under 4500 rpm, decel/engine brake downhill if possible. Cool down, repeat. Change oil way early first couple of times, ignore owners manual was written for lowest cost of maint ownership stats in this regard. After break in oil changes very 4 to 5K if not tracking vehicle.

[@andrewcrane6020]

Well said!!! Can't wait excited for you congratulations 🎉

[@synergycreations8960]

What about new built motors. Needing to be tuned on the dyno!

[@turdferguson4447]

Ive only owned 2 new cars but ive always done the 500 mile break in

[@David-zf5tm]

When I took delivery of my brand new 2022 Challenger Scat Pack the top speed displayed 97 mph!!! I have adhered to the manuals break in process to a tee, and it seems ok, but I worry about how the car was treated before they delivered it. Any thoughts anyone?

[@user-ex9zm7bg3x]

My '23 SP said top speed = 101 mph and I freaked out. My salesman said it's a factory electronic testing thing. He showed me on the lot a SP just off the train reading 97 mph. Also a Hellcat (no test drives allowed) showing 104 mph.

[@1dex]

Same for me it’s been bothering me ever since purchasing, I bought it with 591 miles and the top speeds were 100, 98, and 93 🙃

[@jetliorigami]

I know somebody who didn't break in their scat (did a burnout right in the lot). Rear diff was toast before 2000 miles

[@crankshaft-rf1nh]

And that's what the warranty is for. Probably week parts to begin with. You cannot garentee any moving or electrical part on any vehicle, bad/ week parts are made every day.... maintenance is your make or break most generally...

[@jetliorigami]

@@crankshaft-rf1nh I agree with you 100%.... but.... if you knew this guy you would definitely know what I mean. Break in meant nothing to this dude

[@Channel-jy1ui]

Dyno video out already for his 170 Demon.

[@fulcrumsee5968]

It is important based on that bad engine blowing up fresh out the factory, and they deny your warranty when they see your highest speed is 143 mph and you have 170 miles on the dash.

[@shanewilfon6860]

If that dealer actually gives u that demon at msrp and no add ons then they really deserve to be recognized and applauded 🎉🎉🎉🎉❤❤❤

[@RacerX9]

They delivered as promised and were great to work with the entire time

[@GMPowderCoating]

I want to take my 23 Redeye to hennessey performance to get a 1000whp upgrade. My question is this not good to do with a car that has 23 miles. I live in vermont so the only time I can really do this is when it leaves the dealer and ships directly to them. This way when it gets to me it’s really. Thoughts on ppl doing aftermarket upgrades on new cars with companies like Saleen, Roush, Hennessey ?

[@Dennisft]

Can you do a 2018 hellcat versus a 2023 hellcat because I’m deciding please, you’re my favorite KZbinr😢

[@alexvaldez7317]

Good content man 💪🏻

[@johncarter1137]

So you don't recommend the Cleetus McFarland method, then?

[@crankshaft-rf1nh]

2 step check brother!

[@woketrey9320]

Makes sense, Camakat just got his demon 170 and As soon as he got it he was just beating that thing💀💀

[@doloressalgado3427]

I live right down the road from that dealership have two challengers one a RT and second one a hell cat love my big girls

[@howardsingerdc560]

Extremely knowledgeable

[@Najran14]

A valuable instructions 😇👍 We appreciate it …. Love from Saudi Arabia 🫡

[@user-ex9zm7bg3x]

I've never understood the desire to "save money" on oil changes.

[@thewolf61691]

Was easy on my redeye for 100mi then gave it hell and changed the oil at 1000mi... Changed every 3k theresafter and doesnt consume any oil.

[@kingofthanorth]

Don’t matter if you’re not keeping it forever. 9/10 most people don’t . Or care to break them in

[@RussHolmes-v5u]

In the manual between 300-500 miles it says to exercise the full rpm range. Does that mean take it to redline? 500-1500 miles it says no track events. Does this mean to continue the break in to 1500 miles before driving it to its full potential?

[@Challengerscatpack50]

Yes, it means run it the full rpm range. But only for a short time, and not running it from a dead standstill. It means going down the highway and hitting passing gear and running it up the rpm range. Or being in second or third gear and running it up for a short period of time. Drag strip, (or track), is putting a heavy load on the engine and drivetrain. Doing a rolling run doesn’t put the same strain on it. 😃

[@user-ex9zm7bg3x]

The way I read it after 500 miles go for it. Just don't race it for another 1000 miles. You'll notice they say for the first 300-500 miles don't hold the pedal to the floor. One can conclude after 500 it's ok to do that (although I'd still feel like I was thrashing it).

[@Redeyereaper8]

What happened to your demon reveal?missed live video 😢

[@PNice-ox6ei]

Definitely think engine break-in is necessary. Although it’s hard to do it when you buy the car out of town. I bought my Scat 3 yrs ago brand new…..bought it in D.C. and drove it back home 5 hours to N.C. I kept it in between Sport & ECO modes with the cruise control on 70 mph. So far 3 yrs later haven’t had any problems with it. Only issue had with it was 1 yr after ownership I did a hard acceleration up to redline and check engine light came on and engine went into limp mode. I stopped and turned engine off for few minutes and then cranked back up and engine seemed fine. I think it was due to engine just being started and was cold when I did hard acceleration. I took it to dealership and they did a diagnostic check and kept car for a day and couldn’t find anything wrong…..that was 2 yrs ago with no further problems. My Scat has 14,000 miles on it now as I have another daily vehicle i drive and my Scat is still going strong.

[@RSSLLWF4]

ill be asleep during live will have to watch after i get to work

[@RollinIsbell]

Probably good that you did this video. The internet (and local cruise ins) is full of "experts" that are convinced that they know more than the factory engineers. Or, their buddy, or their neighbor, or their gear-head uncle told them something different than what the Owner's Manual says and they're going with that.. Every manufacturer's Owner's Manual has specific guidelines for that particular car/engine. For example, the Owner's Manual for my 2005 GTO (366ci/6.0L LS2) specified keeping speeds under 55mph (and vary your speed) for the first 500 miles and to avoid hard stops for the first 200 miles. The one old-school practice that I still cling to is my initial oil change intervals. And your comments seem to verify that I'm not wrong. I try to do my first oil change at about 1,000 miles so I can examine the oil for metal. Then I do my second oil change 2,000 miles later at 3,000 miles to once again examine the oil for metal. And, I do my third oil change 3,000 miles later at 6,000 miles. And that puts me right on schedule with the Dodge Owner's Manual for the 392ci/6.4L HEMI to do future oil changes at not more than 6,000 mile intervals (or 6 months, whichever comes first.). Should there be a problem down the line, Dodge (especially under Stellantis) will want to see proof that you followed the Owner's Manual's service schedule. (NO ... that does not mean you're forced to have the service done at the dealership. Just keep receipts and a service log.) And there's even more misinformation when it comes to which oil to use. Lord help you if you suggest following the Owner's Manual instead of using the same oil you ran in your '68 Charger. TLDR: Read your Owner's Manual and follow what it says regarding Break-In, Oil viscosity, and Service Intervals

[@davidlee-vm9ub]

I have very carefully broken in 4 Hellcats and 4 Scats and never had ANY problems with any of them..

[@americanassassin001]

I also recommend using breakin oil. I use Royal Purple Break in oil and it makes a difference. People don't understand small things like this when paired with the proper break procedure make a huge difference in maintaining the life of the vehicle.

[@joshreynolds729]

Good video man 👍🏻

[@luiscarrero9192]

So what's the story of the unveiling schedule?

[@FlatPlaneCranky]

I refuse to buy a car that has more than 4 miles on it. If it was test driven and beat on for a few miles I won’t buy it. Break in is pretty much a religion to me. You’re right on target for break in…. been doing this since I purchased my first brand new mustang 5.0 Notch back in 1991.

[@MrFcwright]

I followed my brake in procedure to the letter

[@MikeyMopar392]

So I am thinking you must be breaking in The Red Devil as we speak so you can get that awesome content rolling 🤔

[@RacerX9]

You never know..

[@KenTruxal-ul3sr]

Why do you keep saying both of the dream giveaways are hemi equipped? The 1970 does not have a hemi in it. Do you not know your older dodge cars?

[@Bossman027]

I drive it like I stole it as soon as I get it off the lot. LOL

[@Vffr1]

I ordered and purchased a 2016 Charger Scat Pack. It's damn near the same car. Mine was under $40K. Dodge is selling hype. I can't afford hype, especially for just stickers. Triple

[@sleeeper88]

Oh God not this debate again. On a hellcat the engine is ran hard on the dyno before it goes into the car. You are breaking in the Trans and differential more than the engine. I've built over 200 engines from 100hp 2 strokes to 600 inch big block chevys. All the car engines were broke in on dyno for 30 minutes and then ran hard on dyno. Never any issues. On my hellcats I give them 100 easy miles and then I let em eat. Never any issues, no noise noise oil consumption. Even just 100 miles the engine has rotated 1000's of times. The bearings are breaking in mostly, rings get seated first very quickly. If the break in was that important they factory would limit rpm first 500 miles and they don't. Hmmmm!!!!!

[@DegnisAecas]

Anyone know what wheels those are?

[@RacerX9]

These are the widebody gold school color wheels .. I forget the name of the wheel itself

[@Ramblequist]

There is nothing in the manual about changing oil until 6K miles. VW Golf R posts break-in instructions and first oil change at 10K miles. I mean, the Germans aren't slouches when it comes to car maintenance.

[@WinfordStraub]

Racer X is smiling on the inside.

[@robertbois89]

What is the code for that draw? Just "Racer X" ?

[@RacerX9]

Yes just enter racerx .. sorry I will pin a comment

[@robertbois89]

@@RacerX9 Thanks!

[@BigJoe5.0]

I'm always cringed out when I see people jump in their car and drive off right away. Like let the fluids cycle a little first

[@crankshaft-rf1nh]

Definitely warm up. That's part of proper maintenance...

[@pplebite8844]

5000 miles for break in...what's the issue?