Is Building a CARDBOARD Oven worth it?

Something I've seen a ton of people doing is using a box to create their own bootleg oven. Here's a quick guide to do that.
Sign Up For the Free Course on my website to learn how to open lights the right way!
www.flyryde.com/offers/Ye3BHz...

[@flyryde]

Hop onto Headlights101 and post a comment: www.flyryde.com/offers/Ye3BHzrC/checkout

[@teligon]

The guy(s) at AZC Car Style use this method 100%. Never seems to fail.

[@garymcnemar6620]

Pretty ingenious!

[@joshuamarko87]

If I was in a bind and the kitchen oven was in use then I would go a head and try this out fo sure :)

[@bridoc519]

Chris, try sitting it (head lamp) on a piece of peg board cut to fit the box with the heat entering the box below the peg board. You would have to prop it (peg board) up a few inches with wood.. This should diffuse your heat somewhat, mitigating risk of over heating one spot. *Edit: coat the inside of the box with aluminum hvac tape

[@flyryde]

If you HAD to, I think adding some extra effort here would be wise… but I’d still feel bad for you 😅

[@jokerscape]

Only think that’s ever put me off doing my own lights is that Mrs wouldn’t let me use the oven and I didn’t wanna buy a second lol this is a great idea

[@flyryde]

Wait until you light a cardboard box on fire with an expensive headlight in it, lol. Then she’ll really be stoked on it 🤣🤣🤣 No but seriously I do hope this helps dude 👍

[@jokerscape]

@@flyryde kinda expected this at some point 😂 just wouldn’t let her know

[@vincentking8267]

Fun fact: combustion point of paper/cardboard is 427C. You can put a leftover box of pizza in the oven at 450F to reheat it.

[@flyryde]

Sweet 🙌🙏

[@luigibutoi7238]

Ive been doing this for 2 years now perfect setup for butyl sealed headlights but permaseal not a chance lol 😆 u also need a small "exhaust" hole at the top of the box to let the hot air come out otherwise you will be buying a heatgun after each job lol I've been there.

[@flyryde]

Broooooo 🙌 thanks for the heads up, that makes so much sense 🤦‍♂️🤷‍♂️

[@sciroccomods]

Hi, would i be ok doing my 2015 scirocco headlights, i dont want to screw them as there bi-xenon with bend lighting, super rare and about £650 $770 US each used. cheers.

[@chriskao4920]

So I did this exact thing with some cheap ebay headlights for an acura TSX. and jt was IMPOSSIBLE no matter how long i let it cook. The cheap headlights used really hard glue that was nearly impossible to pull apart. watching this video inspired me to try finishing the project😂

[@flyryde]

Sounds like Permaseal. This is not a good solution for permasealed lights at all. Surprising that a set for an Acura is sealed to tough?

[@flyryde]

Hey dude, just wanted to let you know you won a contest today on my IG live 👌

[@garforce2]

damn, beat me to it

[@R8Prototype]

Good method for avoiding the house oven

[@fate300m]

if you do make your own with a box like this one, line it with aluminum foil and use the 3m aluminum foil tape.

[@theheadlightproja8753]

Good for mobile businesses who need to open headlights.

[@killersleeve382]

I was very off on this guess!

[@2doors303]

Well story time. I am 16, and i did somethong similar to open some broken headlights to extract the projectors, and it took on fire, big fire, in the basement, home alone, no fire extinguisher, but I managed to put down the fire 🤝

[@flyryde]

Yikes dude! I’m sure you’re not alone in this.

[@ExtremeTitan69]

Lol, watch the videos but afraid to comment. Now I have to!

[@teligon]

Chris, where is your PPE? 😃

[@flyryde]

You didn’t notice my PPS? Proper Protective Sandals are a MUST for professionals 🧐

[@tazerface8638]

haha you know they make handles for razor blades and a poor mans funnel! how poor do you need to be that a funnel has to move to the wish list. haha but as always great video all the info I need.

[@SLR-hn5yy]

That's what she said

[@flyryde]

Caught that? 😅

[@Eilidh_Maclean17]

Hey ..... I was right 🤣

[@flyryde]

It’s cause you’re the great Henriks Booooooooot 🙌

[@Eilidh_Maclean17]

@@flyryde 😂😂 brilliant, hope you n the family are all good Chris ✌️

[@juanquiles3154]

People are going to melt something lol

[@flyryde]

To be honest the direct heatgun is by FAR the easiest way to melt lights. This is likelier to burst into flames before the lights melt lol

[@gixxerjay79]

Should have used arduino

[@gixxerjay79]

😂

[@flyryde]

🤣🤣🤣💀