Is the ACTIVE 2.0 still worth it in 2025?

[@GLI_1701]

I've had mine for 2 years and happy with it every time I turn it on. And it's very durable I don't necessarily take care of it very well and it works just as good as it did when I pull it out of the box❤

[@TripleGAutoDetailing]

I have had my 2.0 for this entire past year. Outstanding unit. Very satisfied. 👍👍

[@BarryL_EV]

James- Active 2.0 rocks! You are spot on when you say it’s one of the best pressure washer on the market. Your customer service rocks too. Had one small issue, Active sent out a new part within 2 days. I had my garage wired with a 20A circuit with you in mind. I’d buy the 2.3, but a divorce might be threaded with more detailing equipment. Now just give me a rack that holds my 2.0, 100ft cable reel, and foam cannon! Please!

[@ACTIVEPRODUCTS]

Glad we could solve the issue! For the rack, we're coming up with a wall mount solution that can hold everything you mentioned. We're aiming to launch it in Spring 2025!

[@Snookattack]

After all my research I am very happy as a DIY at home user. Great to see Active supporting and improving the 2.0 No regrets.

[@ACTIVEPRODUCTS]

Thanks for your support!

[@Mike_1977_]

I love that you cuntine to share the development of your products and look forward to setting up my garage with Active soon.

[@ACTIVEPRODUCTS]

Do share your setup with us once you're done!

[@StevePierson123]

It's more relevant now than ever before with the availability of spare parts coming soon. Customer support has always been amazing from you all, keep up the great work. Something I would love to see in a pressure washer (nobody has done this) is high/low flow switching capability. I did a small calculation on my end using the 2.0 as a baseline: Flowing 2.7-3.0gpm at 500psi would net a similar impact force, however, be much better for rinsing and draw much less amperage than running 2gpm @ 1000psi. It just wouldn't be able to be used with foam cannons and small orifice nozzles.

[@joelvasquez4653]

Absolutely 💯

[@JR007x]

Yes absolutely and purchased mine last year…top-notch!!

[@cyclechris6591]

It’s been 3 months of pure joy with my 2.0. Great product. As a suggestion, you might consider selling the product without the wand, cannon and hose. That would offer us an even better price point. The other thing to tweak on the 2.0 is a re work of the stop circuit to allow use of the non steel braided hose like an uberflex and allow running 2 units in parallel. You guys are so clever with pressure washers, should mine ever die, my next product will be an Active.

[@ACTIVEPRODUCTS]

Thank you very much for your support!

[@bandito3377]

Active shelf… when?

[@ACTIVEPRODUCTS]

Aiming for Spring 2025!

[@razmspiele25]

When are you releasing the mobile detailing station?

[@ACTIVEPRODUCTS]

We're aiming for Spring 2025, will get you a more precise date in the near future!

[@santi8751]

What happened to the VE52 !?

[@racerx7057]

In a word...AWESOME.

[@drive2siva]

After a lot of thought and research, I got active 2.0 through OG and loving it so far

[@ACTIVEPRODUCTS]

Thank you for your support, glad you're enjoying it!

[@The_Rampant_Lion]

Just got one for Christmas! ❤

[@ACTIVEPRODUCTS]

Enjoy!

[@OldDetailer]

Mine is working just fine with the Adams 60’ hose. When I want to get all the way to the end of my driveway, I add the Active 25’ hose that came with the unit to give me 85’. I cannot see and drop in performance with the extra 25’. When I first received the unit I put a pressure gauge and ammeter on it. I also calculated the flow rate. My tests mirrored Active’s almost exactly.

[@robl6044]

Great video thanks for sharing 😊

[@dainperrault585]

when is the 2.3 all in one bunble going to be avalable to purchase? pressure washer, hose, reel, gun, faom canon, shelf. etc?

[@roc9265]

I love this pressure washer. High flow rate compared to others

[@ACTIVEPRODUCTS]

Thanks for your support!

[@malachi2371]

Is there a minimum pressure needed to operate the 2.0?

[@algiordano9214]

Excellent unit I love mine works great. Al, NJ, USA

[@DalHarpJr]

I have ZERO issues with my Active 2.0 and my bootleg Obsessed Garage wall setup. I'm looking forward to getting more use out of it in the Spring once everything warms back up!

[@ACTIVEPRODUCTS]

Glad to hear that you're happy with your unit! Can't wait for warmer temperatures!

[@MyGuyKirby]

Any testing done to see how large of solar battery units will run the 2.0?

[@ACTIVEPRODUCTS]

Not at the moment unfortunately.

[@Greatgadgetsgear]

Confused as you state it’s for detailers yet today your customer service stated the warranty wouldn’t cover professional use? That you have to buy the new $650 model 2.3?

[@whung1978]

Hi, are you planning to launch a Simoniz version of this Active 2.0 for the Canadian market?

[@ACTIVEPRODUCTS]

Hi there! No, but the 2.0 is already sold in Canada directly through our website or our distributors

[@whung1978]

@ACTIVEPRODUCTS Thanks a lot!... I saw yesterday the Simoniz version of the VE52 and liked it, but I was wondering if I should wait for a new version of the 2.0... Just trying to justify with the wife I wont spend any money just canadian tire points 😅

[@thesir8028]

I would like to see Active product outside the USA. Step it up Active in 2025 make it happen!

[@ACTIVEPRODUCTS]

We managed to reach Australia and New Zealand last year, but we're working to expand our reach even further in 2025!

[@malachi2371]

Is there a minimum inlet pressure needed to operate the 2.0?

[@ACTIVEPRODUCTS]

Anything above 40 PSI should be good.

[@johnryan1386]

Still waiting for the 2.3 here down under! 😢

[@samuelvazquez7280]

For future versions of the active 2.0 it would be nice that it could be rebeildable like the 2.3

[@ACTIVEPRODUCTS]

There's some limitations on how much rebuildability it can have for being a closed unit, but we've applied much of what's possible! Parts are currently available through our call center, but they'll also be available on our future parts store.

[@JC-to9ts]

If you could only make it so it doesn’t scream at ramp up, it would be near perfect. For those with close neighbors or sensitive family members, there are quieter units albeit for much more money.

[@MP_7]

I would love to see availability in Europe...

[@ACTIVEPRODUCTS]

It's our goal for this year! Visit cardetail.be, they'll be selling many of our products and the 2.0 with accessories is arriving this month.

[@MP_7]

@ACTIVEPRODUCTS thx, yes I actually found them and planning on ordering. 👍

[@sebastienderidder5418]

what is so special about it to perform in every household circuit? (15 amp) is this issue related to USA homes? there is nothing special about 15 amp.... I don't understand. Would like to buy one in Belgium

[@ACTIVEPRODUCTS]

Yes, it's directed to US homes. Professional electric pressure washers usually only work with a dedicated 20A outlet, but by setting our pressure washers to work under 15A, most US households can use them! You can currently pre-order the 2.0 in Belgium through cardetail.be. The units should be arriving this month!

[@wera172]

I love mine (weekend warrior here) - bought it to replace a dead Greenworks unit, and its perfect for me. Mine provides a self-measured slightly greater than 2gpm, and now running just under 12a with a SGS-28 wand, and 5.0 nozzle on a 1/4" hose. Great for my purposes

[@clints8888]

great performance just a shame it’s so bloody loud

[@tonyperez7057]

1st from Puerto Rico 😂

[@paulattanasio3061]

Curious. I see in a lot of your videos, you really only talk about the 2.0. What’s the deal with the 2.3? You really don’t seem to push it. Why? What is the main differences between the 2 and if I wanted to buy a new machine, how do I decide which one to get? Can you do a video comparing the two?

[@ACTIVEPRODUCTS]

Hi there! Most of our recent videos touch on topics involving the two units, but we give importance to both the 2.3 and 2.0. It's a great video idea, we'll send it to our team! In the meantime, if you're looking to buy any of the two, this can help: If you'd like extra performance and durability, you can see the 2.3 as an upgrade since it has better specs, better built materials, more replaceable components, and it's serviceable. You can also mount the 2.3's cage on a wall for a more fixed setup, which can let you save on purchasing a shelf. There's also the option of removing it from its cage, making it the most space-saving pressure washer out there with this much power. As for the 2.0, it's used by many DIYs and detailing professionals because of its light weight and mobility, while still delivering great performance. It's the lightest pressure washer out there that will give you 2.0 GPM and 1100 PSI and it's only second to the cageless 2.3 in matters of saving space. Many of the 2.0's components are also replaceable. If you are looking for a more fixed, heavy-duty detailing setup and don't mind the noise, the 2.3 is your choice. If you value mobility but still want great performance, go for the 2.0.

[@paulattanasio3061]

@ Thanks for the response and the great explanation! It’s looking like the 2.3 may be the one for me. It’s winter here in NY so it may wait till this summer so hopefully you will have a full 2.3 setup/kit. I would love to get the whole kit and caboodle! Thanks again for a great product and taking the time reading and answering our comments and acting on them. Keep up the great work!

[@ACTIVEPRODUCTS]

@@paulattanasio3061 You're most welcome, do send photos of how your setup looks if you end up choosing the 2.3! Also, we're planning on launching our wall mount in Spring, which should make it easier to make a quick setup with your pressure washer and accessory kit, stay tuned!

[@marcg1964]

2nd stupid comment.

[@Neo_The_One_]

None of your products are worth it. They are all overpriced.

[@antnope3042]

Mine died a few months after using it