Is the Antec NX410 to much of a “budget” case?

[@PapaMav]

You have provided the most details of the fans, that I have come acrosse. It's important in my book, thank you.

[@LarryAsberryJr]

Had my eye on this case for my wife's build. Now, I'll look at the other cases you suggested. I'm currently rocking the Phanteks so I might try the Montech.

[@RobeytechLive]

Both are great!

[@Pzevv]

I have the Mini-ITX version of the Phanteks case that was mentioned. They really don't give you a lot of room for cable management, considering the option for a side mounted radiator. I have an EVGA 3080 Ti hybrid that has a 240mm external radiator, and the rear side panel leave's almost NO room for cable management. The side panel is currently open until I get custom shorter power cables.

[@loud544]

80 bucks, no USB C and molex fans included. No thanks Antec. Appreciate the video Robey!

[@JoeMamasAtMyHouse]

Dude…. It’s 80 bucks what do you expect

[@johndank2209]

What do you need USB C on a PC for anyway?

[@samoodustani5198]

@@johndank2209 I don't know , my phone has USB C into USB A cable ,so, and only USB C can go into my phone, so I Don't have a cable that plugs into USB C because my cable has USB C only on one end , so If I had USB C on a PC it would collect dust right now

[@calebthomasralph]

Just built in this case for a super budget, spare parts build I did for my buddy’s kid. Got it for $64 and had zero issues. I even got the $19 Thermaltake CPU fan wired up with the case fans. I was very impressed with it in general. I7 6700, 1660 combo ran super cool and it was relatively easy to build in. Moving fan cables and stand-offs is a little annoying but I thought it was great for the money.

[@RobeytechLive]

There are better cases at the same or lower prices that don’t have those compromises. That’s the larger point.

[@calebthomasralph]

@@RobeytechLive Thanks for the reply! I'll certainly check out MONTECH next time I do a budget build.

[@harunwoo1519]

Are all the fans connected with 1 molex or does each fan need a molex connector

[@antqvny]

Everything in my build is working fine except the led control button. Any tips on how to get that to work?

[@brgodsey]

Never watched you before but like you! You know your stuff and you call it like it is and I think thats great!

[@ManGrieves]

Looked at this review, jumped ahead.. you said molex... and that's all i needed to hear. thank you.

[@mutasimrahman6833]

I think I can live without a USB C port, and I think it's fine that they removed it because a USB C port is quite expensive when compared to a couple of USB A ports or an reset switch.

[@mutasimrahman6833]

But Molex fans ARE HORENDOUS

[@RobeytechLive]

lol

[@Bdi.]

What people used the usb c port for?

[@mutasimrahman6833]

@@Bdi. For external drives, plugging in their phones, etc. Not very helpful tbh, especially since they're really slow.

[@Slinkycashew]

@@mutasimrahman6833 I’m new to pc building so what’s a moles fan?

[@kurzitza1]

Thanks for the well thought out review. Helped a lot. 👍

[@Kababalax]

Excellent review! So refreshingly precise and clear and pointing out all the issues that matter! Great stuff I'm now subscribed!

[@ViXoZuDo]

I was looking for reviews of this case, and I'm sure you can put a bigger PSU if you remove the HDD tray. The HDD tray can be removed with a few screws on the bottom of the case.

[@animalyze7120]

You don't need a bigger PSU if you are building in this case, it's not designed for HUGE systems.

[@ViXoZuDo]

@@animalyze7120 any case is designed for whatever you can fit in. This case was clearly designed with a removable HDD tray for that extra space for the PSU. I'm just mentioning that he never removed that tray, so his statement about the PSU compatibility is wrong.

[@jamesm5883]

I just bought this case and instead of a molex cable, it's a sata for the fans,so far, no complaints.

[@aizen.x.9312]

Hello, do you recommend it? I have nx410 available in my area vs abkoncore c550m

[@geritisdale-brock7247]

I bought this case a few weeks ago and was finally able to build 3 days ago. My fans also have a SATA cable. The RGB worked for a while, and then when I moved the PC from the table I was building on, onto a desk, the RGB quit working. I can't figure out why.

[@kundankumarsingh2944]

In mid tower cases corsair 4000D or lian li lancool ll will be ultimate choice....little bit pricy but worth it.👍🔥🔥

[@xSwxve]

Second this. Last build was a Lancool 2 (non mesh). Current is a 4000D Airflow. Lancool is built better, but the 4000D is absolutely stunning.

[@geritisdale-brock7247]

I just bought this case for my first build. The rgb on the fans worked the first day and then suddenly stopped, but the fans themselves still work. Now I know it might be the molex cable.

[@RandoR7]

I have a question I’m new and when they say “case” is it like a pc itself

[@samoodustani5198]

@@RandoR7 case is just the metal box ( or glass , or whatever it is made out off)

[@exnovaa]

Can you do a video of how install and AIO Cooler in this case, thank you

[@SimcredibleProduction]

I wish I saw this video before buying this case on sale. My build in this new case won't work and after a few people looking at it with no luck I'm wondering if I got a dud of this case that was returned to the company after it stopped working for a previous customer.

[@xcalibills]

Would love to see a custom loop in this case

[@2011jaydog]

awesome build....I just swapped my white parts into my white casr..n black with black..looks awesome...ill be posting a after vid.,

[@aizen.x.9312]

hello sir, do you like the case so far? I have it available in my area vs abkoncore c550m , let me know your opinion

[@midwestfisherman]

I just did a build with this case. Overall it was fine. I’m not too anal about cable management. As long as it looks decent and works, I’m good. The fans worked, the rgb works fine. I did have to take the back fan off to get the motherboard in. I used the MSI B550 Tomahawk ATX motherboard. I also had to add the additional stand off for the right edge of the board. One additional thing that I noticed was the front panel plug ins (power switch, hdd led and power led) were very loose when plugged into the pins. Not sure how that’s going to go. Overall I’d give the case a B-.

[@zelrius8714]

Hello, can you please help me with the gpu. I’m a new builder but I have no clue how to screw in the gpu with this case like what screw do I use and what is the slider thing for near the brackets. I’ve been trying to find a video that will show it but I cant find one

[@jjr59]

@@zelrius8714 3 months later aye did u ever figured out how to get it done?

[@Hamad-re9vr]

Thanks thats help alot in size chart and building i was stuck in motherboard I thought its not going to fit in 👍🏻

[@jlgroovetek]

Hi Robeytech, I'm wondering, if it's possible to move the front fans to in front of the chassis (i.e. to be just behind the front mesh), to give more room for GPU inside. If so, can you also comment if it's possible to mount 3 x 120mm fans at the front, again, in front of the chassis rather than on the inside. Thanks!

[@johnpaulbacon8320]

Nice review

[@bakeurpotatoe5157]

can the case fans go just one colour, for example blue

[@OscarMartini]

In order to use the fan RGB could u connect the molex connectors to the PSU molex connectors? Or do u need to do something else?

[@gardening_easy]

yes connect to psu molex but cant connect to motherboard which is bad as they advertise as argb fans

[@albanian5525]

Hey Robeytech! Can you help me out really quick? My case is giving me lots of anxiety lol. So I believe my Antec NX800 case fried my motherboard (I ordered a new board earlier today). Could it have been the standoff screws that were preinstalled or the ones that I installed? Or was it one of the Front panel connectors or something? I really do believe the case is behind it since the build worked in my first case right before I swapped it. (All the case fans were working and lighting up, so it leads me to believe the standoff risers are the culprit possibly?) Or did me installing the HDD_LED connector wrong the first time fry my board? It'll help me out IMMENSELY if I knew what the culprit is, so I don't end up frying my new motherboard that's coming in on monday. Thank you Robeytech if you reply!

[@albanian5525]

@Ujjwal No, I ended up having to buy a whole different motherboard. The case ended up frying my motherboard. LOL. The reason for this was because of the extra standoff screws that they give you. I installed them onto the case for motherboard (ATX size motherboard). Either I installed them wrong (I highly doubt it since, well.. just screw them in. I think the either the extra standoffs aren't properly made or something or I just ended up stripping off the "paint" from the standoff screws. Either way! I would AVOID installing the extra standoff screws that come with the case! Just leave the preinstalled screws that are already in the case there and just use those. That's what I've been doing for months now and NOT EVEN ONE ISSUE with the case now. Overall, it's a great case! If you can though, I'd recommend fetching the extra $10 - $30 for the Lian Li Mesh 2 case! It's far better than this case IMO! Or if there's even a Lian Li Mesh 3 case now (Not sure, just saying if there is then that's what you should go for!).

[@PapaMav]

Good honest review. Question: do you think a 280mm AIO would fit up top, one of the ones with the thicker rad? Thank you.

[@gtifury310]

You also didn't include the fact that you can't fit all those rads in at the same time from the looks of it. Just replaced my Meshify C with a 5000D. The Meshify C was extremely limited with water cooling (even 2 AIO's) to the point that I just upgraded. System also runs much cooler now with just 4 fans and one AIO.

[@Youbite]

Subscribed for Macros and Mass effect.

[@nolimitstech8595]

I have the same issue with the ARGB function, the led's don't work. Where did you get the replacements? Please answer, I'm building this pc for a customer.

[@luckalvafabian5223]

hola bro, tengo el problema de que los ventiladores de mi case se alimenta por sata, estos encienden pero no consigo que los colores se enciendan

[@nolimitstech8595]

@@luckalvafabian5223 igual yo camarada, pero termine comprando abanico led por separado, traen su propio controlador. Saludos!

[@HAKKER-gq7lg]

not putting a 1300w monster in like you said but im gonna try and put my 1200w monster in there😅

[@eck3506]

The video title blatant error: "Too much" (as in more), not "to much" (directional, as in going somewhere).

[@TrashBagHyono]

I connected the molex to the psu but only the rear fan runs. The two stock fans at the front won't spin. Any help?

[@matthewcritchley3743]

Do you know how to plug in the case fans because there is no port to plug the in

[@mercyrain4445]

at 7:48 how did you get those 2 brackets out?

[@Mimikyu560]

Pretty sure he just unscrewed it and pulled them out

[@ansar2918]

Can you paint the front panel black sides to white ? Is there any way?

[@D4rk_Blaze]

Hey i am doing a White build and this Case white version is 50$ in our country should I get it for my whole white themed Pc? And I have a M atx motherboard

[@ButterflySimmer]

what case would you suggest in this same price point.

[@victorjohnson6678]

I’d love to have that build

[@Ryan-re1rs]

Not in that case.

[@PopBunny8899]

@@Ryan-re1rs tbh the issue was the building experience which you only do once in a budget case and then never again. The case itself is great after the building. It's definetly not 75 bucks now. They clearly adjusted the price for better value. Where I live it's the cheapest white case with the most value.

[@bign1667]

What new antec case can i get to upgrade from my antec nine hundred?

[@williamcastano7086]

That is nice i like it i making a new pc now i know i what i want

[@-miku9226]

What's the maximum length of GPU allowed if put the radiator in the front?

[@carlz3955]

240

[@jayblueeyez76]

I made the mistake of buying the Antec NX-310 .. and it looked cool.. but everything else was horrible!!! I will never buy an Antec case again.. It is cheap.. it looks cheap, feels cheap and is obvious cheap.. Now My Phanteks P360A in white? Could not be happier with it.. really!

[@PopBunny8899]

I heard it also feels cheap and I hate the black and white instead of a clean white + you have to buy your own exhaust fan ...

[@randellabucay2434]

🔥🔥🔥🔥

[@hellrazzor4941]

Good morning from the uk. 🙂 where are you all from.

[@broskiisdead6936]

PUERTO RICO!! puñeta

[@phantominception2881]

India AMD good morning

[@Mimikyu560]

Guys what kind of gpu can I get for this case?

[@soheibdz8624]

Does the case has rgb hub?

[@PapaMav]

No

[@Stormzfate]

Can I use this for a 3060ti

[@gheezydroid]

Yes, I have the nx410 with 3060 ti founders edition. Plenty of room between the GPU and front fans

[@aizen.x.9312]

@@gheezydroid hello , do you like the case so far? I have it available in my area vs abkoncore c550m , let me know your opinion.

[@pengi1441]

It’s similar to a fara r1 but a better bang for the buck

[@merox34]

my argb also didnt work :(((

[@luckalvafabian5223]

hola bro, tengo el problema de que los ventiladores de mi case se alimenta por sata, estos encienden pero no consigo que los colores se enciendan

[@travislunn18]

my led button dost work anyone know why

[@furiouschip]

my LED button doesnt work, so for 2 years i have a rainbow light

[@luckalvafabian5223]

hola bro, tengo el problema de que los ventiladores de mi case se alimenta por sata, estos encienden pero no consigo que los colores se enciendan

[@furiouschip]

@@luckalvafabian5223 O

[@andrewscotti1136]

i have this case. the only thing im not happy with is the molex fans. i dont really care about a usb c as i would never use it anyway.

[@poke9742]

did you have led issues

[@andrewscotti1136]

@@poke9742 no i didnt. The reset/led switch gets pluged into the rear fan

[@aizen.x.9312]

@andrew Scotti , hello, do you like the case so far? I have it available in my area vs abkoncore c550m , let me know your opinion

[@andrewscotti1136]

@@aizen.x.9312 i actually swapped out the case because i got a huge new graphics card but i had no complaints with the case and i really liked its power button.

[@aizen.x.9312]

@@andrewscotti1136 thanks

[@jaowsa]

bought this case looking to place a 3070ti................................................................ 99.9% it wont even fit lmao. any ideas?

[@kings9469]

some of us none americans would like to know the measurements as well

[@RobeytechLive]

Fair point we will fix that in future videos!!

[@jonwashburn7999]

3060 for close to 900 bucks in the video. Still makes me feel ill.

[@owenomc]

That price is honestly mind blowing

[@RobeytechLive]

It’s $479.99 in my link. Sorry we were showing it on Newegg but that’s a third party seller price

[@jonwashburn7999]

@@RobeytechLive O.K. That was heart stopping.

[@anguscockbain6122]

mid day in Australia nsw

[@aersn4locs]

I paid 40$ for my case lol still has all these features

[@RobeytechLive]

Yep!

[@bdawg8907]

Decent case for the price, too bad about the cheapo fans 😕

[@onehandclapping_5356]

molex is a deal breaker for me

[@zackpringle9047]

bro your uneven beard made me cringe more in this video than your bitterness to the fact that you didn't have a working fan connection xDDDDDDDDD

[@PopBunny8899]

Rude much...

[@bdawg8907]

🤡

[@Nh_audios]

the fans make me say no thanks immediately

[@Mohawkchris]

Molex is horrible I'm sorry

[@FrancoRoya]

I'm a Dog, I can hear a very high frequency in the sound of this video. It's there the whole video

[@RobeytechLive]

I am sorry, I will have the team look into it!

[@FrancoRoya]

@@RobeytechLive Thanks 😄

[@thecasualreviewer2148]

18:27

[@FakeName39]

Sigh Antec come on....

[@RobeytechLive]

The FLUX series is great! But some of these budget cases not so much

[@FakeName39]

@@RobeytechLive my Antec P193 V3 Black laughs in your direction. :D

[@thecameraguy4955]

but Lian li best

[@scalamasterelectros3204]

i think this is ass compact for a standart atx ass it gets

[@rtauch]

First