Is this the Best SFF Case? Well our data says….

[@hellrazzor4941]

I love sff builds they look so much better in my opinion.

[@patronautsvirtualworld8155]

Really great content! It seems the KZbin algorithm does not like it though, otherwise you would have at least 100k subs. Your case reviews are beautifully done, great job!

[@SpuriousECG]

Seems like this case overcame the biggest challenges of building in a SFF case. Though, figuring out things is part of the fun for some of us masochists :D

[@avirtualworld4U]

Looks like the solution i've been looking for. Good review thanks.

[@MD-sc1jk]

It looks like the case is available for per-order on the cooler master website, but they do not have a delivery date and the price is $499. I hope that is typo and it will be $349.99. I really want this case, but I can't justify paying $500 for it.

[@Deviantsoundz]

Yeah 500 is a major mistake

[@loadent8532]

NR200P white with Asus B550 and 5900X Bequit Topdown w CM850 SFX MSI 3090 Suprim X. 2 TB & 1 TB nvme, 8 TB 3.5”, 2 x 4TB 2.5 shucked drives. It’s full and make some heat, 2 exhaust top fans, 1 exhaust rear and 2 intake bottom thin fans. Side input fan. Tight is tight. Looks awesome and solid as a brick for SFF. Love it.

[@SYmotgang]

made a build in this case with the asus b650e-i, 7600x, and a 2 slot rtx 4070ti. Had a blast building it and love the size. Easy to bring to a LAN etc. I can pack my whole rig into a trolleybag (like the ones you use while traveling.

[@jimbo_v_rl]

It's almost too easy of a case now 😆 As a first-time cpu builder (soon to be, hopefully), I'm kind of gravitating toward getting the 200P instead, just to get my hands on actually routing cables and installing a cooling system/power supply. Plus, if I went with something like a 3600x cpu/3060 gpu, liquid cooling may not even be necessary. It's extremely tempting to pay the extra 50 bucks to get liquid cooling and a practically pre-built computer, but I dunno, I'm torn on the fact that I'm forced to have a vertical gpu and the build would streamlined to the point where it wouldn't be a learning experience. Maybe I'm a unique case in feeling this way but that's my current take on comparing these two cases.

[@CanadianTexaninLiguria]

How do you build a CPU?

[@deeznuttzz7627]

@@CanadianTexaninLiguria just like legos

[@mojito6629]

I wish Cooler Master also gives Colors Option for NR200P Max like they gives to the NR200P non Max version

[@MultiSciGeek]

Super simple. I love it!

[@Oceanborn712]

If I wasn't planning on using any of the preinstalled parts but wanted the case, I'd still buy this one and sell the parts I don't want. That's quite the saving!

[@cl4ssic]

who would buy a mediocre cooler master aio without any original packaging though?

[@powerhouse884]

Can this case be the TOP SFF contender for the 40 Series specifically the RTX 4080 GPUs…? After that Nvidia keynote it feels like SFF are in danger.

[@jakegoodboyy]

Such a good channel. Subscribed!

[@CntBckt]

Why have pretty much all the videos I've watched about this say $350 MSRP? I've not seen that price listed anywhere.....not even on the CM site. Am I looking in the wrong places? I would LOVE to get it at least close to that price. :\

[@DoomOfConviction]

I cannot advise anybody to go out and buy the NR 200 P to mount a bottom radiator! Air will get trapped in the highest point and that’s the pump on a bottom mounted AIO and pumps aren’t made to move air and will fail rather quick. I would love to buy a empty case that is made like the Max and add a AIO and PSU myself but to do that I needed to buy the normal NR 200 P and invert mod it to have the radiator on top. I would highly suggest they release just the case of the max or better revise the NR200P completely to avoid people using bottom mounted radiators.

[@issalambson5544]

Damnitt, ive been waiting for this case. It was supposed to come out is sept. I caved already.

[@ecobasetech4558]

Same, I decided to go with the Lian Li Q58 and literally just received it about 10 minutes ago

[@richtrem978]

Thanks for a great review, you make it informative and interesting.

[@will3356]

If I was the King of Cooler Master I would have just changed the NR200 and NR200P to have a top mount radiator and discontinue the old versions.

[@munchkinmatt1670]

I wish I could find this kit for the MSRP.

[@greateralx]

when is this going on sale?

[@RobeytechLive]

Great question!

[@bigolechung5308]

@@RobeytechLive can you let us know when they put it on sale?

[@queenofstamford3141]

@@bigolechung5308 It's been on sale in Europe for a week now..

[@Cre4tivEdits]

Where do you buy the case , I don’t see it anywhere online ?

[@HundredKnight]

Love that case and the vertical gpu

[@MultiSciGeek]

How would a low profile CPU cooler perform in this case?

[@aidan8533-i1t]

I wish this thing would come out already. It was supposed to come out over a month ago I believe

[@queenofstamford3141]

it is has been out for a week now :)

[@rdmccray]

Is the tubing from the pump to radiator standard length? Asking because my pump is making some noise I am not really comfortable with. May have to replace the AIO.

[@Riavenxo]

Have you tried laying it on its side while it’s on? If the sound goes away, that might be an air bubble in the pump, based on my experience. Unfortunately i travel with my nr200 a lot and i always get those air bubbles so I’ll be switching out the AIO with a fan

[@rupert3k]

As only 2 x 8pin PCIe cables are supplied what's the solution to run a card with 3 x 8pin PCIe such as FTW3 Ultra? Would Corsair cables be compatible?

[@Vulpeculaaa]

The case is live on their site now but it is now $500 instead of 350...... with no delivery date, literally just better off getting all the parts separately now (can also choose from multiple colors of the case now). Will be cheaper and faster

[@craigshandworld]

Someone mentioned that this case does not actually easily support a liquid cooler fan on the roof. So people doing it are just super techy and know how to make it work. Did you hear anything about that ?

[@Deviantsoundz]

Is the $500 price on it a joke??

[@adrastos123]

460 but nope but ifs a case, 240 aio and 850 watt psu so not that bad

[@Deviantsoundz]

@adrastos123 The psu is noisy, and the aio has problems very often with fans and pumps, mostly fans.

[@teamwrld965]

The best youtuber

[@RobeytechLive]

Aww thanks!

[@343_GuiltySpark]

It looks like there is plenty of room for full width fans underneath that GPU. Am I wrong?

[@Deviantsoundz]

At the end of the gpu yeah but by the ports only slim fans.

[@ttvvioletToT]

When is this going to sell？

[@TheFELIX251]

Did you overclock the cpu?

[@SBMotoZ]

recently picked one up on AMZN for $450, $100 over MSRP, but hey, cheaper than a used 1080

[@jaiizwaii89]

Where can I buy the case wtf

[@marchufnagel9068]

How hot did the sn750 get if checked?

[@Zetler]

I can't find this case anywhere.

[@joshsanderson5512]

Im wanting itx but the cases im after are either 250$ (ncase m1, and being in the uk postage and import fees) then the nr200p max and the hyte revolt 3 arent in the uk. 🙄

[@joshsanderson5512]

Spoke to soon a store is selling it from tomorrow 😃

[@fgpz7670]

did u sand the down the ihs of the cpu?

[@trllllon]

Does this have the newer version of the v850

[@mirthumos]

I really like the layout of the case and was waiting for it for its release until i found out that you can only get in 1 color and an ugly aio. Why do we have to get it with all its nonsense.

[@nach1113]

Good build, but not enough cooling for today's systems.

[@cl4ssic]

with the new $500 price tag this thing is actually terrible value for money. and it‘s only available in this ugly ass gray. guess it will be the Meshlicious then…

[@M4R71N_88]

Omg dud you should take out the back, install the card to it and then plug the connector....

[@boostedprince8163]

I bought this case and tried it with a 3080ti and it was like a hot box.

[@Fenryex]

Which brand model 3080ti did you use? I’m looking to build in this case too

[@boostedprince8163]

@@Fenryex founders edition

[@Fenryex]

@@boostedprince8163 oh Damm, may I know what kind of temps you are getting? And your ambient room temps? I might change my mind abt using this case :(

[@welfarestates8465]

@@Fenryex Temps are actually great, I have a 4080 FE and Intel 13th gen cpu in mine. There is room on the bottom to mount 2 Noctua 140mm slim fans also, pointing right up at the gpu.

[@craigshandworld]

did you use a radiator fan or liquid cooling ? im hearing a lot of people say its stays cool

[@aaronbraich5648]

Can't believe they didn't use USB C on the top panel for this!

[@noonespecial6076]

is there any type c on the case at all?

[@byteme0000]

Nice review of the case, but does every single build you do cater just to gamers? There are plenty of other cases out there filled with rainbow barf bling and clear side panels for people who just play games. Don’t you do any builds for people who actually do useful things with their systems?

[@jamiancortes8892]

wait you can learn french in japan? o-0 ----

[@hy0chan]

this is a really great case. but that aio definitely got a lame performance. just if we can mount gpu horizontally : to show up the aio, I will change that to nzxt kraken x63 lcd, and this case is perfect itx case. I believe cpu thermal will also drop around 10c. I don't really like the nr200p because it is missing their update of top mounted aio. damn cooler master would you please add an option to mount gpu horizontally so we can show off the aio. informative and interesting review btw! love it! I'll be waiting for this case availability in my country coz it's delayed!

[@ZoeyR86]

the rad in this case is custom shorter then normal 280mm so nope a x63 will not fit

[@hy0chan]

@@ZoeyR86 oh damn! 😂 anyway I just bought the nr200p and found some work around to mount radiator on top. thanks to reddit sff community! I love nr200p more now. haha... and yet it's consider as a cheap sff case.

[@JoeMaranophotography]

Cost me £264 :)

[@ozzyflores9569]

Notification Squaaad

[@1234enzor]

More expensive then the biggest cases you can get, this case should never have been made.