Is the Kobra 2 Neo the Ultimate 3D Printer for Beginners?

Рет қаралды 17,625

Күн бұрын

Пікірлер: 38

@davidhaykus1568 Ай бұрын

I have one on the way that I got during their 9th anniversary sale for $149.00 so I added in a spool of their PLA so $169.00 shipped. Should be here by next week for me to give it a try.

@emmanueljayeoba3275 21 күн бұрын

How is it? Planning on getting one

@dereckr9751 26 күн бұрын

I got mine for $139 and there is huge community for this printer. I was able to upgrade the printer power supply fan etc.

@cpace123 4 ай бұрын

I have one. It's decent. Pay $100 more and get a bamboo, or 60 more and a flash forge 5m. My 5m kills my Kobra Neo 2 in speed, even after upgrading my Kobra Neo 2 with klipper. Save your $$$. I get quality prints, but I get better prints off of my 5m at twice the speed.

@anthonylong5870 4 ай бұрын

I wouldnt buy another Bambu printer if they were .10 cents , ive had so many issues wirh mine i regret spending $1100 on the thing daily. Worst purchase i ever made

@fomingera65 4 ай бұрын

Which baboo model?

@anthonylong5870 4 ай бұрын

@@fomingera65 P1S

@Kid_illithid 4 ай бұрын

My first printer is the kobra 2 neo. If I’d have known better I’d have gotten a bambu or something. I’ve only got about 200 hours of printing on it and I already need to replace the motherboard fan. Makes an awful buzzing noise when I turn it on sometimes.

@uasakura 2 ай бұрын

I have a resin printer, and i dont print as often mow because I got too lazy with the washing, so i do plan to get this one.

@Bomba_mario124 Ай бұрын

I’m getting mine today and I got it from Amazon and the filament for about 200$ it wasn’t that bad on price but I hope it’s worth it

@Restalgia Ай бұрын

@@Bomba_mario124 honestly have had mine for a little while and really enjoying it. I've printed tons of things. Just getting into full on super hero masks. There is an awesome deadpool 3 mask that is broken down into pieces that fit on this print bed.

@HBbk-yo9vz 4 ай бұрын

I put the flash and downloaded the file and put it in the printer and I didn't get the file, do you have a solution? I'm from Saudi Arabia and used the translation

@Gaming113-YT 4 ай бұрын

Is this filamemt good from Amazon ANYCUBIC PLA Filament 1.75mm?

@Restalgia 4 ай бұрын

Yep, I've been using it (came with the machine) but I went back and bought more. It seems to be good quality.

@Gaming113-YT 4 ай бұрын

@@Restalgia thanks

@Kid_illithid 4 ай бұрын

I’ve been using it and I find it works pretty well. It’s not necessary, but you’ll get better results if you remember to search high-speed PLA because it flows better and is designed to print through faster printers like this.

@Visionaep 4 ай бұрын

Do you recommend I buy this because I have an extra £50 after this so do you have are recommendation for £50 more or should I just get this (It’s currently on sale for £160)

@Restalgia 4 ай бұрын

I think this is actually a great printer for the price especially when it's on sale. I've seen it on Amazon sometimes for 100 dollars (CAD) off which is a steal. And I've found their filament to be really good quality too.

@Qadrado 4 ай бұрын

Thanks for the review, I'm thinking about getting this for my wargaming terrain. Can this printer resume a print after a power outage? Thanks!

@Restalgia 4 ай бұрын

I'm not sure to be honest. It does have a pause print function, so it's possible but I haven't tested that out specifically

@Kid_illithid 4 ай бұрын

Hi there. I have this printer. It’s not terrible but I would spend the extra money on the bambulab A1 mini, in retrospect. I’ve had the printer for a month and already need to replace the fan in the motherboard. And I had a power outage the other night. It lasted long enough that the bed cooled down and the print failed, but when I turned it back on the printer asked me if I had a power outage. I selected yes, and the head moved to the side to warm up and excrete, and then it went to start printing. Because my print had failed I just stopped it as soon as it was ready to go, but I assume it would work just fine if you had a short-lived power outage

@gabeybabeyiv 2 ай бұрын

If something specific you did that made the fan do that or did it just start itself?

@jaxt2578 11 күн бұрын

@gabeybabeyiv I have the same printer and it does it on its own. It is a printer that is quality bang for buck from my experience over an Ender 6

@gibbyo3408 Ай бұрын

Just curious about sizing, would I be able to print things like armor pieces? I know I could print them in pieces but I just want some recommendations

@TORENCH Ай бұрын

Yes everything is possible you would need much filament tho and a good construction and you somehow need to do them in pieces

@biagi1426 2 ай бұрын

hi, why can't I find the model of the anycubic cobra 2 neo printer on ultimaker cura, can you help me?

@mohanad-fn1zp 2 ай бұрын

use anycubic slicer software

@brentspellmeyer8943 Ай бұрын

You just have to transfer the parameters from the SD. It's something like import configurations

@LatinoVibesss 2 ай бұрын

Does this supports LW to or LW-PLA

@mehmet4435 3 ай бұрын

How do you transfer model to your printer please ?

@Restalgia 3 ай бұрын

You can do it with a Microsd card or by USB C cable from your pc

@JAVINDU1 2 ай бұрын

How much for this printer i see this in ebay its about 106usd shipping for 40usd and it is brand new is this good for buy this printer is this printer price (110 usd)

@brentspellmeyer8943 Ай бұрын

Yes

@TheFoxalot Ай бұрын

Get a bambu mini instead. Leaps and bounds better and better user experience. Plus their app is epic. You can print straight off the app. This one is a smidge more for an advanced user.