Is The New 10 mm Hi Point Pistol Worth It? Hi-Point JXP10

[@jakescorpion1]

Hi point is smart they are giving people what they want and not screwing them on the price.

[@mr.diversity2267]

I own a few HPs, the carbines and handguns. I’m going to collect them, every model and caliber they have. Proudly.

[@mr.diversity2267]

Thanks too for not being a HP basher (which seems to be fashionable). Good job.

[@gabriellee9682]

I never undesirable the negative remarks people about highpoint. I have the 10 mm, I've shot over 1000 rounds in it and no problems at all. Very accurate as well. I've owned numerous highpoint and never had an issue

[@brockhowell2296]

I have been VERRY tempted to get their 10mm carbine, every video I've seen they've been reliable and for under $400 that's hard to pass up.

[@leobenjaminlopez9255]

I recently bought a JXP 10mm HP, installed an KAK compensator, an Feyachi HL-20 light, and a Holosun 407c red dot on it and I really enjoy how it shoots and how accurate it is. I’ve shot 60 rounds so far with no failure to feeds.

[@robertramirez2076]

WOW!!! Every addition each cost more than the pistol!!!

[@jesuslugardo9044]

Nice, I searched up everything you have attached awesome and not expensive at all

[@LeinaVance]

​@@robertramirez2076 so what boy?

[@ayezklozed]

It​@robertramirez2076 it's ok ca nt believe if it cost more probably wouldn't have such backlash, shit I can put a 40 round drum.the only gun I think Id pay for would be the FN 10 mm, after i put some duct tape on it ! So I feel more comfortable comfortable

[@djhogan9399]

Great gun for the money, I've never been disappointed with any Hi Point that I have ever owned. Their customer service is second to none!

[@bobbycherryjr9318]

Thanks 4 not comparing it to a Glock!!!!

[@jeffreylocke8808]

Aftermarket triggers are available for this Hi-Point.

[@anon_laughing_man]

Mcarbo makes triggers and a trigger spring that makes the trigger a lot more reliable. I imagine if the trigger is properly polished it would be even better.

[@Broken_Arrow58]

Even Hi Points deserve some love. Maybe they can turn it around like Taurus apparently has.

[@TheHonestTruth]

Your reviews are the ones I go to when I am serious about a purchase. Thank you

[@HammerStriker]

Thank you.

[@brianshuler6951]

As always, you cover the important features, the good and the bad. You provide an honest assessment of every pistol from budget to Gucci. Great review.

[@29madmangaud29]

I'm not an owner of one of these however I'm very happy that a company makes them, with quality, and if I didn't have the $ for my glocks then I would buy one of these! Thanks for showing these!

[@flatplaneoregon4605]

Glock suck but they work too

[@gottmituns3225]

@@flatplaneoregon4605 What's your favorit for shoting range and wich for daily carry, what gauge❓❓❓

[@craigroberts6439]

I have a lot of nice higher end guns but I really like this one. When I picked it up at the FFL which sells many high end guns, all of the employees and a few customers were passing this around with some kind of fascination. It’s big, heavy and clunky but sure created a lot of interest. It really is a cannon. :-)

[@jamesmacon9751]

You should still have at least two hi points

[@azore124]

mine jammed via failure to feed every single magazine multiple times, I took it apart, cleaned it, lubricated the feed ramp, and yes I was using tested magazines from my 1095. I will be taking it to the range this weekend to see if the feed ramp just needed a polishing and the slide some lubrication. It seems to be feeding 40 s&w snap caps with little issue, I love hi point, they generally make a great product, I hope this isn't the first time I have to use their life time warranty. I will reply an update and edit the comment after firing 50 rounds through it at the range.

[@Wsmith247]

I hate mag disconnects too, good thing is take off the right grip and pull out the disconnect bar, reinstall grip and no more Mag disconnect.

[@martyneff4008]

I've done that with both of mine

[@keithtate1241]

Mine should be coming in today. My bid took the auction on GunBroker and at $200 including shipping and FFL fees I think I got a good deal. Thanks for the video and keep shooting 👍.

[@flatplaneoregon4605]

I wanted to see more of you shooting through the same hole when you took your time. That is my experience with the JHP45 45acp handgun, the 4595ts 45acp Carbine, and the 995ts 9mm Carbine I used to own. I will always have at least a couple.. "Useful IS as useful DOES" Hi-Point's in my collection.

[@VEGASROBBI]

Wow a 10mm without a locked breach that shoots nice; I guess having a slide the weight of a garden tool makes the difference.

[@leonardpiskacsr.7111]

I just got one of these and am satisfied with my Purchase Hi point makes a good product and Stands by it....Looking to Pair it with the Carbine Soon....Thanks for a very good...Detailed evaluation of the JXP10 mm.!!🙂

[@9-5budgetinvestorthecheapt49]

U still Liking It I'm Thinking About GETTING 1 ..... NAW I AN GETTING 1

[@Leonard-t6b]

​@@9-5budgetinvestorthecheapt49Did you ever get it?😊

[@kevanhubbard9673]

It's pretty sizeable!

[@toddcanipe1190]

Thank you for the review and the detail you provide. I'm seriously thinking about purchasing the JXP.

[@jeffreylocke8808]

10mm is a good handgun hunting round. Razor Dobb’s dropped two African Cape Buffalo using Double Tap ammunition and a Dan Wesson 10mm semi automatic.

[@craigroberts6439]

Thanks for the best review of this gun on You Tube. Honest and well done.

[@rickypridgen2595]

Yes it is worth the money!!!!

[@dancallan5964]

I bought the hipoint 10 mm pistol last week got a heck of a deal on it during Black Friday, taking it to the range tomorrow, my first hipoint firearm, found a 10 mm carbine on sale , might buy it as well, 2 10 mms for under $500 sounds like a heck of a deal to me , and if I like the 10 mm carbine I probably going to get the carbine in a 9mm and 45 acp

[@ricobonifacio1095]

I do believe I will buy one of these for a woods/ animal defense weapon, and a home defense weapon. I carry a Taurus G3C and will keep it that way, but this is a great option for someone who doesn't want to spend 600 dollars on a 10mm.

[@jeffreylocke8808]

You can disable the magazine disconnect and improve the trigger.

[@emmanuelperez6669]

By disabling the mag disconnect the trigger automatically improve or it will improve by polishing the internals and installing the mcarbo sear spring?

[@tomvawter4531]

Good review. To disengage the magazine safety, simply remove the right grip panel and lift out the transfer bar component of the magazine safety device. Reinstall the grip panel and you are ready to go. It only takes a few minutes.

[@flatplaneoregon4605]

Mind the small springs on the backside of the panel. I did it so long ago I can't recall if it's 1 or 2 springs.

[@medicalcheeze787]

Just got one. Within 30 rounds I have had countless failures to feed and one fail to extract. The firing pin also bent itself inwards. I love it and I want it to work, but lord have mercy the feed ramp looks like it was dragged behind 20 grit as a finish.

[@rockystelone21]

Life time warranty any issues just sent it back

[@benlaubscher6371]

200 rounds through mine..no malfunctions

[@waynemilles366]

I've had my 40 cal highpoint for over 10 yrs, hog and deer hunt with it, it will shoot and cycle anything i put in it. 40 yrd shots is as far as I've dropped anything. I like it.

[@513to205nbak]

I fondled the S & W M & P 10mm it felt nice, lighter than expected but i have yet 2 grasp 1 of these. I own the 1095 already so this might 🐝 a great investment.

[@mkshffr4936]

Thank you for the detailed report. I am a revolver guy so if and when I can afford to get back into shooting my first purchase will probably be a .38. In autos my preference is for DA/SA but if the safety really is safe to carry I might just pick up a C9 for a backup and just to have something that uses the ubiquitous 9 if it ever was the only thing available. They seem to do what they need to do when needed so why not.

[@thatguybrody4819]

if you mean concealed carry, Hi-point isn't really the best choice for that being how heavy and thick it is.

[@mkshffr4936]

@@thatguybrody4819 Naturally I would prefer something like a CZ-83 but I was thinking in terms of highly restricted finances.

[@thatguybrody4819]

@@mkshffr4936 if it's finances you are worried about it's understandable. being able to afford the gun and enough ammo for range time and to take home is important. if you don't mind caliber, you could probably get away with a TX-22. it's in .22lr but with how cheap .22 and the gun in question are you could get enough ammo for a decent amount of range time and still have some to take home.

[@OOICU812]

Good review. Subbed.

[@Moxon-xn8qc]

I enjoy listening to you. Subbed.

[@seabass6811]

I'm a hi point fan but they really have got to make the magazines less disgusting looking. If it weren't for the magazine and that weird grip logo design it would actually be a good looking gun.

[@Blando7887]

I have the 10mm carbine from Hi-Point. It’s alright but I chose the Glock 20 for my 10mm handgun

[@GOLFNBADSTYLE]

What kind of OWB holster would anyone suggest for this gun

[@robertramirez2076]

I haven't been able to find anything yet! I think it is still a new product, and the many companies haven't come up with anything that works!!! I'm thinking the elastic bellyband holsters may be the only thing workable for now!!!

[@MrGsteele]

It would be very interesting to see if this would fire - as some 10mms do - .40S&W cartridges, and cycle them reliably. That would certainly put frosting on the cake - although it is ALWAYS a bad idea to just carelessly load a round for which a gun is not explicitly chambered, unless the manufacturer identifies the caliber as supported. For example, .38 spl/.357 Magnum, or .45/,45 Super, etc. I only bring it up because of the stamping of both calibers on the magazine.

[@usasoccergoalie]

Bought one of these two weeks ago. Came with one mag. Fails to eject spent round and load from mag about 5 out of every 10 rds. Bought another mag thing it would fix it. Same result. Sending back for inspection

[@TonyfromTO]

You probably dont have to pull the mag out to rack slide, just press the button and let the mag pop out a bit and pull the slide back, then push the mag fully back in.

[@flatplaneoregon4605]

You are correct, instead, remove the lockout bar under the right grip panel and throw it in the "cleaning" solvent tray for the future. Mind the small spring\s on the backside of the panel. It may even moderately improve the worse than nerf trigger pull on many of the older production models. My JHP45 has so many rounds through it I barely notice any real tension. The interesting part is micro adjusting the balance after each round to hold the sight picture, because the mag barely weighs anything as it empties. It's already a "tactical" cordless drill or concrete retaining block, so squirting some lead weight into the baseplate seems counter intuitive. And God forbid you ever have to take a public shooters sight picture. But if you do, remember to Calmly and loudly say STOP look over here. If they do, continue verbal commands. If they won't the trigger goes, smile, say squishy squeeeze, and wait for the flash! It's like a custom worn Strassell 3 stage trigger. The self polishing old and improved squishy squeeze wall banger. Guaranteed on average to go from nigh unmeasurable to 7\7.5lbs in 1k rounds or your ammo's whack. {6-9lbs your mileage may vary} If it's a jam-o-matic..for the love of MoM {Hi-Point} clean the damn thing, and warranty replace the mags. Of course (he says sarcastically) I'm mostly being pedantic, or is it sardonic? 🤔 I can never remember, It's all so facetious 🤨, I can't keep a straight face 🤣

[@mr.p960]

THE INFORCE LIGHT IS AN ABSOLUTELY PERFECT FIT FOR THIS JXP 10MM HI-POINT

[@jim9990]

Where can I get a holster for this?

[@robertramirez2076]

Has anyone found a holster that fits the JXP10???

[@jim9990]

@@robertramirez2076 Uncle Mike size 5 sidekick holster

[@planbnewssource8259]

I went to my local frontier justice yesterday and they said this came out two years ago and it was hard to get. So I've been seeing a few " new hi point 10 mm" videos. So Wich is it new or old and hard to get

[@flatplaneoregon4605]

The 10mm handgun is new this year. The 10mm carbine was a couple years ago. Both prolly harder to get as they sell out quickly because everybody "hates" on them because they are so inexpensive lol.

[@9-5budgetinvestorthecheapt49]

Order Online n Get Shipped 2 Your Local Store.... That's What I'm About 2 Do .... A Few Sites Have them In Stock

[@benlaubscher6371]

Mine runs great with 40sw and 10 mm

[@rockystelone21]

What?

[@benlaubscher6371]

@@rockystelone21 what?

[@rockystelone21]

@@benlaubscher6371 you shot .40 cal thru 10mm?

[@benlaubscher6371]

@@rockystelone21 yes..do it all the time..look it up if you want..done it in both Glock 20 and Glock 40..the hi point fed fine ..other than some of the weaker 40 wouldn't eject 100 percent...lots of shooters do it .saves money.its just a shortened 10mm..

[@rockystelone21]

@@benlaubscher6371 thanks for the information..👍👍

[@teelowteelow356]

That’s some good shooting brotha!

[@HammerStriker]

Thank you.

[@grasunmajjurach5568]

😄😁😗 VERYGOOD 👍👍 I FROM THAILAND PATLUNG

[@esalinas1817]

Good job..👍

[@dene1196]

All of my Hi Point carbines work for me, fun guns to shoot. I am sure this pistol is the same. Too bad I cannot buy it due to Illinois low melting point alloy guns that are banned in the state. Just another gun control law.

[@BUZZKILLJRJR]

I want one real bad actually and I want to see a video where somebody shoots 40 Smith & Wesson in it because they're made to shoot both my dad has the 40 Smith & Wesson high point that he got for Bear defense few more rounds than the 357 Magnum but if you can shoot 40 out of it that would make a pretty fun gun and then put your high power expensive rounds in it when you're out in the woods

[@Lando62]

I like it!

[@calvinthompson172]

Made in USA.

[@FirstnameLastname-qc3xx]

Am I the only one that prefers a heavier pistol for larger calibers?

[@KDANGEROUS1]

Love this vd

[@FLsheepdog1]

Is 40 HP pistol mag interchangeable with the 10 mm?

[@OOICU812]

Great question. I was wondering the same.

[@jameshall2889]

Yes

[@jameshall2889]

They can shoot 40 cal!!!

[@kevinshockey2765]

You might want to try using the carbine mags before saying you can use them....

[@KDANGEROUS1]

Can you get a titanium firing pin fo that

[@KDANGEROUS1]

I watched one vid left dot bocecd off the rear eft sigh

[@Canjo45]

These things look like they would be in a movie in aliens something the space marines would use lol they do look kinda syfish lol

[@OOICU812]

Yeah, they do look more like laser blasters💥 than traditional handguns, don’t they? 😀

[@wes326]

When your trailer park is surrounded by bears and you have to get to Applebees.

[@badas45]

In bear country 2 of these could be handy

[@terryallen9546]

Based on a lot of the reliability comments...might need two. Of course probably wouldn't have time to grab the backup.

[@rtz549]

This company could be more like Kel-tec. If they'd release new and interesting products more often. Or even change; refine, and improve their existing designs. I'd like to see them modify their line up and make them all use Glock mags. I'd like to see a polymer slide with a tungsten insert. If they would release a small pocket carry gun; that would expand their market.

[@jasonburns6307]

Does Kel-tec offer a lifetime transferable warranty with no questions asked?

[@azore124]

the c9 is a fairly small gun, I carry it.

[@dr.burtgummerfan439]

They could make better guns, but then they wouldn't be cheap.

[@Kable472]

10mm high point is a overkill!!!!!

[@3Pillers]

👍

[@Not_So_Weird_in_Austin]

Well Highpoints run, the Red Dot can cost more than the gun, did I say they run....

[@flatplaneoregon4605]

Yeah cuz there's never been an optic or glass that was more expensive than the gun you put it on before Hi-Point right? smh

[@switcheyephotography5722]

Hunting has turned into a rich mans sport. They lease up all the lands and demand exclusive access to their club. They don't even eat the meat. They "donate" the meat out out of the "goodness" of their hearts to hunters for the hungry bulls!t. Others end up throwing the meat away after it's been in their freezers for too long. Frankly, most people don't like the taste of venison. The same is true of duck, goose, and upland bird hunters. I have nothing against people hunting out of need, but I despise sport hunters.

[@calvinthompson172]

Made in the United states of America... Cool.

[@zaquevynne]

Looks 3D printed lol.

[@deanburney]

I’m not trusting this in the back country. I just can’t take a chance like that. Hickok 45 don’t like it. Noo, no.

[@zeljko4189]

That a nice looking gun. Said nobody ever🤣

[@jasonburns6307]

Doesn't have to look good to put you on a t shirt.

[@OOICU812]

I get your “point,” but considering the price and lifetime no-question warranty, this is a thing of beauty.

[@kevinshockey2765]

Can one person tell me what ammo they use for this junker? Mine jams ever two rounds. And please no thumbs up unless you have an answer.

[@EasyGrowsIt]

Blazer

[@513to205nbak]

Try Sig Sauer ammo. I use blazer, Seller & Bellot and Hornady

[@Leonard-t6b]

SIG Hollow points...Blazer..S+B 0 issues!!

[@justincase4812]

One of the more ugly guns out there, but no doubt does the job.

[@FLsheepdog1]

High Point guarantee: WE COVER STUPID.

[@betomg7573]

this one looks like the ones they put on cows at slaughter house

[@leebaldwin6015]

Get what you pay for

[@29madmangaud29]

hey not everyone has the $ for something finer......

[@flatplaneoregon4605]

You get way more than what the price dictates you should. They function reliably with good clean properly tuned/ lubed magazines. They are way more accurate than you, so get used to the trigger and do your part. They are fun to shoot. My JHP45 is far more comfortable to shoot than my knuckle cutting glock suck 21

[@DuckGuy-1957]

In all my years I've NEVER heard anyone (who's had a HP _PISTOL_ for long) say it's good. Everyone, including some of the well respected gun folks on YT say they suck. (Not the carbines. I actually have a .45 ACP) If HP finally got things right? GREAT! But I go by past performance, and trusting my life to a poor performer? Ain't going to happen.

[@terryholloway9930]

I don’t know what to say always thought they would be better for throwing at somebody pulling your smith and shooting lol it wins the ugly gun award

[@demo2952]

The Cold Steel of handguns!

[@rkelley8475]

Its good as a joke. They work until that don't .. it's a range toy only . It would be negligent to use it for anything else

[@davidhickson2937]

Dumb I can tell you never shot one stop hating glock start off the same way look at glock now stop it

[@scottsewell7078]

It's garbage

[@flatplaneoregon4605]

All evidence to the contrary shows your poor research. And history is just as described too right? Research MudFloods Remember Tartaria. Awaken from historical Amnesia.

[@scottsewell7078]

@@flatplaneoregon4605 junk

[@OOICU812]

@@scottsewell7078one man’s junk is another man’s treasure.

[@scottsewell7078]

@@OOICU812 drama queen

[@Leonard-t6b]

Not junk...solid Gun!!

[@markupton1831]

Just too big and bulky for ccw!!!! Like carrying an anvil around 😢