Is the Revopoint Pop 3 3D Scanner another step in the right direction? Unboxing, Tests, and Verdict

  Рет қаралды 8,986

Rate My Funeral

Rate My Funeral

Күн бұрын

Пікірлер: 35
@fpvtec30
@fpvtec30 Жыл бұрын
I would love to see a Mini, pop 2 and pop 3 comparison. This testing would be very helpful to consumers like me. Thank you for all your hard work!
@philgo2024
@philgo2024 Жыл бұрын
I so agree !
@KanielD
@KanielD Жыл бұрын
Yes!
@GeekGarageDK
@GeekGarageDK Жыл бұрын
Especially since the mini has 20 micron precision, where as this never pop 3 has 50 micron precision, and that is a downgrade, so what does it better than the mini?
@Trevor3DrPrints
@Trevor3DrPrints Жыл бұрын
Great video. Thanks. For sure a video with all three would be great.
@ratemyfuneral
@ratemyfuneral Жыл бұрын
Cheers! Ok, I'll see what I can come up with.
@mikerussell1145
@mikerussell1145 Жыл бұрын
Definitely want to see a side by side comparison, especially on how much better the mini is for small details, I want to scan small details but the mini has drawbacks due to using a different type of light, hoping the Pop 3 will be good enough on small details for me but I'm just not sure yet.
@animallector4982
@animallector4982 Жыл бұрын
Please can you do a comparison video of the 3 revopoint models as you mentioned in this video
@LuchoDa
@LuchoDa Жыл бұрын
Please a detailed comparisson to the revo point 2
@puddingfrais
@puddingfrais Жыл бұрын
I bought a POP2 scanner to scan mechanicals parts. It just don't work well for me. I will wait the POP20 before buying again!
@ratemyfuneral
@ratemyfuneral Жыл бұрын
Aaaah, what a pain. What kind of items where you scanning? Perhaps the Revopoint Mini might have been a better scanner for your situation? kzbin.info/www/bejne/oZi3aJyih7R7m9E
@selimguclu625
@selimguclu625 Жыл бұрын
İ would also like a comparison. Because im about to buy one and want the best for my bucks. Thank you soo much for this great content mate. Big sup.❤
@aka_nodge
@aka_nodge Жыл бұрын
I've just bought one. Can't wait to get my hands on it! It was this or the 3d maker mole. For out of the box this seems more to offer for the nearly the same price.
@loganwillett2347
@loganwillett2347 Жыл бұрын
How’s your experience so far
@Alexwonggingsi
@Alexwonggingsi Жыл бұрын
Wanna to know how small Pop3 could scan compare with mini
@ratemyfuneral
@ratemyfuneral Жыл бұрын
My understanding is that the Pop 3 is 20mm x 20mm x 20mm and the mini is 10mm x 10mm x 10mm
@bv6788
@bv6788 Жыл бұрын
Thanks for being honest in your review. I think the video title sums it up perfectly. I'm still waiting for an under 2,000$ scanner that can do 9/10 scans out of the box without prep work.
@allisondennett5816
@allisondennett5816 Жыл бұрын
Please do a comparison video!!!!
@Jonnay0808
@Jonnay0808 Жыл бұрын
How do you think the quality and tracking compares to the mole?
@ratemyfuneral
@ratemyfuneral Жыл бұрын
Marginally better, but I still intended to do a proper comparison which I will post as soon as I can.
@dmax9324
@dmax9324 Жыл бұрын
Also interested in that comparison
@dovan4092
@dovan4092 Жыл бұрын
What nobody ever shows is what happens if you have uneven detailson the bottom. How do you capture that and make sure it's aligned?
@ratemyfuneral
@ratemyfuneral Жыл бұрын
You have to rotate the object then allow it to track. I've had hit and miss results so far with doing this though.
@MonsterHunter267
@MonsterHunter267 Жыл бұрын
All I've been able to successfully scan is the bust. Anything else I've tried to scan never comes out well.
@nicolaasalbertse3473
@nicolaasalbertse3473 Жыл бұрын
Hi, is this good for scanning dark /black surface too?
@ratemyfuneral
@ratemyfuneral Жыл бұрын
Dark and black surfaces typically just don't scan very well with out preparation sadly. Bit of spray or power and you can get round it.
@TheChumzo
@TheChumzo Жыл бұрын
Is it possible to use this for large scans ( full vehicle)
@ratemyfuneral
@ratemyfuneral Жыл бұрын
Technically I guess it's possile, but you will be there for a very long time and you would likely have to split it into parts. Also due to the reflectivity a lot of preparation will be required to get good results.
@Владислав-ъ1л7л
@Владислав-ъ1л7л Жыл бұрын
The bender indeed has something shiny..and metal
@DigitalCreations2012
@DigitalCreations2012 Жыл бұрын
Love your reviews. Dump the bg music
@ratemyfuneral
@ratemyfuneral Жыл бұрын
Cheers! (Yeah that’ll never happen. The music hides a multitude of sins…) 😂
@Lobesanft
@Lobesanft Жыл бұрын
Due to the fact that this scanner is close to 1000 € I´d rather recommend the Einscan SE instead. Far better software and Shining 3D is without doubt the much more "professional" brand in this respect.
@YouTube_Nr.1
@YouTube_Nr.1 Жыл бұрын
A functional part is the most useful thing one could scan. Unfortunately your video does not show one. All cheap 3D scanner so far could not live up to the hype.
@ratemyfuneral
@ratemyfuneral Жыл бұрын
Give me a couple of examples of functional parts and I'll give it a go in the next video. :)
@YouTube_Nr.1
@YouTube_Nr.1 Жыл бұрын
@@ratemyfuneral Maybe some kind of cable clips, cable holders or spare parts, piece of an air duct. Something that would take more time to model in 3D. So that the scanner would really save some time. 👍
Reviewing the POP3 Plus from Revopoint - Should you buy it?
15:46
Artisans of Vaul
Рет қаралды 3,5 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Scan Spray Showdown: What is the Best Coating for 3D Scanning?
10:29
Incredible Scanning Accuracy With The Revopoint Mini 3D Scanner
10:57
My Top App Pick For 3D Scanning: You'll Be Shocked!
16:26
My 3D Print Lab
Рет қаралды 210 М.
Are 3D scanners like the Revopoint POP3 needed for prototype and modeling work?
14:52
數位原型師-阿堡 3D Digital Designer A-BAU
Рет қаралды 24 М.
Revopoint Miraco 3D Scanner complete test
25:09
Julien Roméo
Рет қаралды 12 М.
New REVOPOINT POP 3 (3D Scanner) -  Analysis, Tests & Review
15:17
Comparing Top Five 3D Scanner Apps | Photogrammetry VS NeRFs VS LiDAR
9:40
JackIsBuildingKIRI
Рет қаралды 175 М.
Is the Creality CR-Scan Otter the new King of 3D scanning???  Watch and find out!
25:18
Which 3D Scanner is Best for 3D Printing?
21:25
The Next Layer
Рет қаралды 216 М.
6 Tips on How to Fix ANYTHING w/ 3D Printing & 3D Scanning
23:58
The Next Layer
Рет қаралды 64 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН