Is There Copper in This Blender?

In this video I show how to scrap a blender for copper, brass and other metals to recycle and make money from recycling the materials.
Want to know the truth about scrapping brass plugs?
• The UGLY Truth About S...
Hi, my name is James and I love scrapping metal for money. I scrap it all, copper, brass, aluminum etc...
Come join me on my scrapping adventures where I share how I scrap items for easy money. I sometimes will go street scrapping or dumpster diving looking for scrap metal.
Please have a look at my scrapping videos and I hope you'll consider subscribing to my channel.
If you'd like to mail me anything you can email at [e-mail] and I'll give you my mailing address.
Thank you for stopping by and God bless y'all.
#brass #scrapper #scrap #makingmoney #money #tutorial #metal #recycling #recycler #junk #fun #cash #copper #hobby #howto #scrapmetal

[@DANStickerman]

Are we Scrapaholics for being addicted to these type of videos? Keep Up The Great Work !!!

[@HHRecycling]

Yes, if you're addicted to scrap in any form, you can proudly call yourself a scrapaholic.

[@scrapitall200]

lol, yes it’s true! Thank you so much!

[@cuscrapping]

As a commercial scrapper, I still bust the motors out and throw them in a barrel/bucket to process later. When you do them in batches, I make no less than $25/hr and have made as much as $50/hr. 👍 Good breakdown!

[@scrapitall200]

They are definitely a good source of fast easy copper. I bet you’re pretty quick with getting the copper removed. Thank you for watching buddy.

[@ThatsRightRecycling]

Not much plastic used back then. Nice Job James

[@scrapitall200]

I love it! Thank you buddy, I appreciate it.

[@scrappingonthefly77]

I believe that's the first blender I've seen tore down. Pretty nice motor in these things!! Thanks for sharing! Great video!!

[@BushDogScrapper]

Hey Bro 🙏 how's it going?! I did one in a video it had red and blue enameled copper windings in it! I still have the windings set off to the side cause they look so Beautiful!

[@scrappingonthefly77]

@BushDogScrapper been a while since I've watched many videos! Been to busy with work and everything else!

[@BushDogScrapper]

@@scrappingonthefly77 I was just saying hello 👋🏻

[@scrappingonthefly77]

@BushDogScrapper I know brother! Hello and hope you have a great day

[@scrapitall200]

Thank you brother, I appreciate you watching. I love scrapping blenders. Easy and pretty much always copper.

[@BushDogScrapper]

Fastest Growing Scrap Channel On The Tube!!! Fantastic Scrap Down!!!

[@scrapitall200]

Thank you so much brother! Thank you for all of your support.

[@sonofeloah]

As a scrapper with my small business, Infinity Services, I take the time to strip everything down. And with the hardware, instead of scraping it out as "shred", I container them either as SAE or Metric and based on types of threads. These get weighed and baged to be sold to repair personal or hobbiests at 50 cents/ lb. For these folks who buy from me, they are getting a much better deal than if they bought the hardware at a store of even online. And I get a far better return than if I sold it as shred. Sure beats .05 cents/ pound.

[@scrapitall200]

That’s really awesome and really smart of you. I save a lot of hardware, as long as it’s not rusty or stripped out. It’s saved me and a few other people. They know to check with me before going to the hardware store lol. Thank you for watching.

[@josephcormier5974]

Yes sir I have always found blenders to be very good for copper and aluminum thanks for sharing this with us six stars sir

[@scrapitall200]

Thank you for watching buddy. I’ve not been disappointed with scrapping blenders yet.

[@ScorpionMetals]

Super video! Enjoyed it. Only thing I can see it the brushes in the motor. Not something people will generally go after but there is Silver in them.

[@scrapitall200]

I removed them then totally spaced showing them lol. Thank you buddy, I appreciate it.

[@HHRecycling]

I love blenders🎉 As always, thorough breakdown and explanation. Great video.

[@scrapitall200]

Me too. Fun and easy to scrap, plus they make a great smoothie lol. Thank you so much my friend.

[@Tom-pi1cz]

Thank you for your video and for your healing prayers

[@scrapitall200]

You are so very welcome! God bless you! Thank you for watching.

[@Kreacher1974]

If the armatures don't have plastic or glue in between the metal slots it is very easy to unwind the copper.

[@scrapitall200]

Absolutely, but they sure are rare to find, at least for me. Thank you for watching.

[@ThatsRightRecycling]

I love see new idea's

[@scrapitall200]

Thank you for watching buddy.

[@saschakonze6867]

thank you for this fun video, had fun watching it.

[@scrapitall200]

Awesome, I’m so happy you enjoyed it. Thank you for watching and supporting my channel, I truly appreciate it.

[@JohnJoe-pf8of]

Fun!

[@scrapitall200]

It is fun! Thank you for watching.

[@JohnJoe-pf8of]

Welcome

[@nicejunk666]

Great tear down as usual I have a old one to do a vintage beehive one

[@scrapitall200]

Thank you buddy! Oh cool, that should be fun to scrap and with good metals.

[@dalemills8052]

Great video, nice to see that much difference in an old blender compared to the new ones. Bless you brother!

[@scrapitall200]

Thank you brother! It’s amazing how different modern stuff is compared to older stuff, no wonder why stuff breaks right away now lol. Thank you and God bless you so much my brother in Christ!

[@richavic4520]

That looks like an old Oster model that I used to have. If memory serves, a man named Fred Oster invented the blender for medical research. They certainly don't make em like they used to.

[@scrapitall200]

Oh wow that’s cool, thanks. No they definitely do not. Thank you for watching.

[@ScrappingScotland]

Another great video brother. Thanks for the info on the bronze. I always put it on with brass as well

[@scrapitall200]

Thank you brother. Thank you for all of your wonderful support, I really appreciate it.

[@maritimescrapper]

Have not found a bad video here yet, doubt I will. Awesome video, as usual!!!!

[@scrapitall200]

It’s likely that will eventually happen 😂 but thanks so much

[@ScrapMan69]

Awesome tear down video buddy! Great video!

[@scrapitall200]

Thank you so much my friend!

[@bigcountryscrapper6885]

Great video my friend

[@scrapitall200]

Thank you buddy! Thank you for watching.

[@scrapnjunk81]

Amen. Great video

[@scrapitall200]

Thank you brother! God bless you!

[@donvoll2580]

Good day I remember watching Price is right & hearing items from J C Penny I would thing it might be a little better quality Thanks

[@scrapitall200]

It was definitely high quality blender. I used to love watching that show. Thank you for watching.

[@thescrapmeister]

Another informative Video! Have a wonderful Christmas!

[@scrapitall200]

Thank you so much! Have a very Merry Christmas!

[@rosebarros2736]

😊

[@scrapitall200]

Thank you for watching my friend!

[@user-vn7rl3kt2o]

Im learning a lot from all your videos

[@scrapitall200]

That’s awesome! Thank you!

[@user-vn7rl3kt2o]

​@@scrapitall200you are welcome

[@scrapitall200]

Thank you for watching my video! How much copper is in a soldering gun? Watch to find out 👇 kzbin.info/www/bejne/kJTVqaOtq8lqbLMsi=6QiDXDyeXBwvfRrx

[@scrapitjc]

Nice vid James. Keep doing it

[@scrapitall200]

Thank you so much buddy!

[@bearhardcorepicker]

Good breakdown....But, was the blender working? You might be surprised by how much some vintage countertop appliances get on eBay. That model might get $15 - $20 US for just that portion for parts/repair, other vintage brands can get significantly more.

[@scrapitall200]

Thank you! It wasn’t working and it was so gross inside, even smelled like rotting food. Thank you for the information, good to know that stuff.

[@MarcelSchr]

Great video as always!

[@scrapitall200]

Thank you so much my friend!

[@anthonycolangeli4133]

Nice way of cutting the copper using the table. I have carpal tunnel syndrome so that really helps. I am also a hobby scrapper and enjoy just taking things apart. Bless the Lord. Since you are a god-fearing man like myself could you please just pray for my nephew who has a rare form of cancer. I only ask this of true believes. Thank You and God Bless!

[@scrapitall200]

It definitely helps protect the wrists cutting that way. Thank you for watching. I will absolutely be praying for your Nephew. You mind me asking what his name is? God bless you too!

[@anthonycolangeli4133]

@@scrapitall200 His name is Gregg and he is just 43 years old. It breaks my heart. Thank You And Bless You.

[@scrapitall200]

@@anthonycolangeli4133 I will continue to be praying for Gregg brother!

[@anthonycolangeli4133]

@@scrapitall200 Thanks so much

[@scrapitall200]

@@anthonycolangeli4133 you are very welcome. Never hesitate to ask me to pray for anything! God is great!

[@CopperEyeJoe]

Another great video.

[@scrapitall200]

Thank you so much, I really appreciate that.

[@JohnJoe-pf8of]

👍👍

[@scrapitall200]

Thank you for watching

[@JohnJoe-pf8of]

👍

[@mattyal9347]

I wish all stators let go of its copper as easy as it did for you

[@scrapitall200]

It can be frustrating with stubborn ones for sure. Thank you for watching.

[@murlbailer3755]

✌️

[@scrapitall200]

Thank you for watching.

[@dr.a006]

Old kitchen appliances certainly can be gross. Good little pile of scrap though! It all adds up like that tub of brass you have.

[@scrapitall200]

This one was especially gross lol. It definitely does add up, bit by bit. Thank you for watching, I do appreciate it!

[@leocorneillier1996]

😎👍👍👍

[@scrapitall200]

Thank you for watching.

[@amadopimenta1313]

Esses rotores você tira o eixo batendo nele e corta ao meio com um facão, tira o cobre facilmente 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

[@scrapitall200]

I actually use a machete in some of my other videos. The ones that have a lot of glue can still make it difficult. But I love your idea for sure, the machete works great. Thank you for watching.

[@amadopimenta1313]

Nesse caso coloco numa grelha com fogo embaixo ou numa dessas churrasqueiras que esse verniz queima todo 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

[@ThatsRightRecycling]

#Boom1st

[@BushDogScrapper]

💪🏻

[@scrapitall200]

👍

[@normajeancaballero7959]

AMEN ✝️🕊✝️🕊✝️🕊✝️

[@scrapitall200]

God bless you! Thank you for watching.

[@piecesofpete5921]

🤙🤙👍✌️

[@scrapitall200]

Thanks for watching Pete!

[@othername1000]

Wonder what that would have sold for if it worked. Or as parts

[@scrapitall200]

No idea but for how gross it was inside I’d never sell it or buy a used blender. Thank you for watching.

[@smitchlego]

bro that's a 5-star vid there

[@scrapitall200]

Thank you so much, I really appreciate that.

[@smitchlego]

no problem I may not have an audience but I don't hate people with 1k subs

[@smitchlego]

hay not 100 likes!!!!!!!

[@smitchlego]

I mean were at 100 likes

[@scrapitall200]

@@smitchlego I don’t hate anyone either lol

[@cuetTimmonz]

Thanks.someones giving one away 4 free.def hope I can get it. From online.

[@scrapitall200]

Right on, that’s awesome. Thank you for watching.

[@dmat1279]

♥️♥️

[@scrapitall200]

@@dmat1279 thank you for watching

[@artstrology]

You should use a black light and check for human blood, because these things are sometimes used for disposing of human victims. You may have just destroyed the only evidence to finally bring justice to Bob's killer.

[@scrapitall200]

What about Bob? That’s a great movie btw lol. I might have scrapped by black light 😂 Thank you for watching buddy.