Is this Issue Unacceptable from TRAXXAS?

[@TomleyRC]

For a VERY Limited time get yourself a Trax 'SUXX' T-Shirt: tomleyrc.com/products/100-suxx

[@dexterbeattie7884]

I love mine got one from your first run on that shirt

[@incorrectbeans]

lol cheecky but wholy deserved in my bumble opinion

[@grrfy]

Got any Traxxarse tee''s ?

[@unloveableandre]

getting 403 error

[@anthonyolds1226]

As an official arrma fanboy, I approve this.

[@RC-4-LIFE]

The biggest difference between you and Kev Talbot is that you actually say “What the heck are you doing Traxxas?” Instead of claiming everything they make is the best! Don’t get me wrong I like his channel but I believe it’s lost something over the years. Your channel however has gotten better while still staying true to the hobby and what should come in a $400+ vehicle! An updated transmitter (the 7000yr old line had me 😂), a metal servo and motor heat sink with fan! Also actually contacting Traxxas, like in your Bandit video, and questioning the gearing for the claimed MPH on their boxes! Hats off to you and cheers! Brilliant channel and one of the best in my opinion! Thanks from Ohio USA!

[@reznya2700]

You sound hurt...... Yeah this dude hates Traxxas vs Kelvin not being bais.... You seem hurt and bais as well....

[@austinkoeppen6122]

​@@reznya2700 *biased

[@BigFatCone]

Kevin is a very lonely person. I bet you had someone like him back in school. You know, the kid that no one really liked but he had all the cool toys and video games, and was quick to tell his expensive Transformers toys were so much more fun than the "cheap-ass" Ninja Turtles they other kids had. Pretty much the antithesis of Phil, whose motto seems to be "You don't have to spend premium amounts of money to have premium amounts of fun".

[@jeffnewhart491]

​@@reznya2700traxxass is garbage fanboy. Biased against junk?... Deal with it.

[@206beastman]

@@RC-4-LIFE Traxxas is not hard to get a hold of they pick up and will walk u thru whatever

[@jonjacob1962]

As much money as Traxxas charges for their 10+ year old tech. They should ABSOLUTELY have a fan already installed. Honestly. Every high-speed rc vehicle should have both motor AND controller fans. They should also have better servo's. It is 2024. There is NO reason for a factory servo to only last 6 months to a year with regular use. That isn't just a Traxxas thing either.

[@rotten2209]

Let's be real, fans are useless. If it's that big of a deal for you, they're around $10...

[@loganfritzsche8439]

Or even better, the traxxas 540 heat sink fits most of the vxl motors that make them run a lot cooler. It's not that big of deal.

[@CheapCheerful]

They're not even trying, won't be long until the Chinese brands make the best stuff. They're getting damn good already.

[@loganfritzsche8439]

@@CheapCheerful the quality may be nice, but something that won't happen for a long time is those Chinese brands keeping up with the traxxas parts department. The spares, upgraded parts, etc, is unmatched.

[@loum7008]

@rotten2209 Agreed. But an RTR for a newbie should just have a fan. Arrma should have fans too. Although those don't run crazy hot like this one.

[@boduke9428]

So it's basically the same as the Slash VXL? It can't run 3s without being really hot and thermaling constantly until you add a fan. Even the Ultimate doesn't come with one.

[@TomleyRC]

I guess so… never had a normal Slash. Only the Maxx Slash

[@50pAndie2pounds2]

@TomleyRC Whhhaaaattttttt?? You've missed out there dude 😲🫣

[@Frankredline]

Very true once you gear up the vxl 3s on any traxxas 4x4 they do tend to heat up quickly. At that point i change out the motor and esc system.

[@RC-4-LIFE]

@@Frankredlinekinda defeats the purpose of getting the VXL right?🤷🏻‍♂️

[@jeremybennett5547]

I’ve never run a VXL on 3s but as hot as the entire system gets on 2s I can’t imagine they would last long on 3s

[@ChrisKnowlesTube]

Great video as always. The VXL does run so hot on 3S. I have the Slash running on dirt and had to fit a fan and heat sink to keep it cool. I used a 3r party on for about $15 off Amazon. It’s solved all the heat issues, even with on of those mesh body protectors to keep the dirt out. I do want the Fiesta body, but will buy a clear one and create my own paint scheme.

[@MrGoat73]

The Traxxas design team need to put plenty of pictures of the CEN Racing Puma on their mood board for inspiration……

[@L2theWcarscoffeelife]

basically a Rustler with a Ford body 420 bucks no fans, no threaded shocks, no center diff they better wake up and actually create something new and actually test stuff the Maxx Slash is an over priced disappointment

[@donniemarks94]

Anything else 1/10 and 3s is basically the same but I agree they should add fans

[@Blehme]

You forgot servo and honestly updates to the VXL because it's outdated... Other 3s electronics perform so much better for a much lower price at this point. The thing is, the base of their cars aren't bad and i wouldn't mind this if they updated other aspects like you said. Other companies do the same thing and just have minor updates. But Traxxas charges massive amounts of money for the exact same crappy parts people have been begging for upgrades for years at this point. I love my 2WD slash and Maxx, but that's because they have everything upgraded besides the chassis lol.

[@TomleyRC]

I loved driving it... but when you look at what you actually get, it's certainly about 20% (or more) over priced

[@Blehme]

@@TomleyRC Thats the thing though. Your planning upgrades to make a Traxxas work out of the box. I know most manufacturers have a really crappy servo (both Traxxas and Arrma are going to break straight away) but Traxxas your also likely to start upgrading parts to simply make it a functional product. Arrma does a bit better here, but they struggle with a heavy chassis and under powered electronics (except that 4s outcast, that things is nuts!)... So pretty much the same cost for either you invest in. I just wish they would stop upgrading cheap plastic manufacturer parts and invest in some solid changes for their customers. Now they have some serious competition nipping at their heals and we're starting to see them trying a little, but mostly just rebadging and not the important parts for a better product like other companies are... So we'll see what happens i guess :)

[@AllInRc1971]

L2thewhatrever, your MaxSlash videos are why I unsubbed your channel. I have two of them and know how to tune and drive.

[@wyvern4588]

I used to work at a hobby shop about 12 years ago. Funny to see nothing has changed with Traxxas, and it was the same for the 2 years I was there.

[@SpookyGreg85]

My Rustler did the same thing, high speed pinion and it'd go into thermal shutdown, on pavement.... Swapped out the VXL for a Castle Creations, haven't had a problem since

[@AndrewSury]

I bought a pair of these on release date earlier this year and love therm. Great parking lot bashers. I took one and put the XO1 6s Castle esc on a 25T pinion with a slipper eliminator and got 89 on 4s.

[@TomleyRC]

Yes, it’s a really nice well set up (and fast) car. Just not quite their in terms of electronics

[@loum7008]

That's cool with just an ESC change! Did it run too hot? Could you make a few passes? Alot of guys have extra 4S ESC's that could do the same. (Like me) You just might have tipped the scale for me. I already have Traxxas TRX4 crawlers with a Bluetooth link remote. I can put the road car on that remote. Thanks for the info!

[@AndrewSury]

@@TomleyRC , Phil, I have so many Traxxas electronics in plastic shoe boxes because at least 35 of my Traxxas don't have stock electronics. They are cheap when you already have them ;)

[@noahsrcs1808]

Wow I'm impressed by that handling! Does make me realise that even concrete rallying / bashing can be cracking great fun!

[@R6Dave11]

I'm glad you found a Traxxas that you like ! I built up a Rally from the brushed version to VXL. I put cooling fans on the motor and ESC, I think I'm running a 15T pinion and it's been perfect.

[@loum7008]

Is there any advantage to starting with a vlx over a brushed version? Are the other components different. What else did you swap out? No gyro/stability receiver I'm assuming. Thanks for the info. I only have Traxxas crawlers at this time

[@R6Dave11]

@@loum7008 faster, better run time and TSM capable.

[@janstenger6230]

As always a down to earth and honest review! We are waiting for two of those for a while now, there's a problem with older models containing asbestos so there's a import stop here. At least we have enough time to get the motor fans!

[@TomleyRC]

It’s a really nice car… just a shame it’s not quite their

[@philstudt3511]

Couldn't agree more on the radio... It's time.. 👍

[@TomleyRC]

I’ll be a little happier with them when they do lol

[@JonnieB.]

Considering their premium price and litigation happy patent department, this shouldn’t be a problem. It should do what they say out of the box, and it doesn’t, and certainly wouldn’t reliably with that kind of heat

[@stance_wrks8129]

7 thousand year old transmitter LMAO bro i laughed way to hard at that

[@discipleoftheword1785]

I want to laugh but I have one too.

[@TomleyRC]

I mean 7000 yrs is close enough right? 😅

[@offsetrc]

😅😅😅

[@iflyrcmike]

@@TomleyRC We were all thinking it.. lol

[@EriMCardenasRC]

@@TomleyRCTraxxas seems to be in love with their “Late 90’s” Tech they’re the Tamiya of the USA

[@PhilipCockram]

Good review . Heat is the Enemy in RC . Unless you're running nitro , LOL. These issues are not new from them , I remember having one of their ESCs blow up because I changed gearing 2 teeth once . Thankfully , but after much ado, they sent a replacement , with the stern warning to never change stock gearing .

[@wellcrc-6703]

We install 1/8 4068-4074 can 6s motors in ours and run them on 4s. I have a 2300kv kyosho speedhouse motor in mine and it BARELY gets warm. Tighten slipper to the max. Change out the plastic bushing and motor mount. Youll be solid.

[@dreamy-topic9857]

Man idk what it is but watching your videos with your accent is just relaxing to me as a us guy lol keep up the cool vids man I’m all for it

[@makalania_bdo]

I bought the brushed version and ripped out the stock electronics and put a HW Max10 2400kv combo, AGFRC 24kg servo, aluminum center drive shaft, steel drives shafts, tall battery clamp, set of street tires for street bashing and upgraded aluminum shocks. Super fun car but not as fun as my XRT LOL.

[@sutton4791]

The transmitter is so big. They designed a carrying handle on top. How thoughtful of them.😄

[@griffonwings5177]

Same here mate! Traxxas connectors and batteries are very irritating. They are NOT that special ! Cheers

[@rcgoodtimes6657]

I used to only run my Vxl 4x4 slash on 2S, and I always used a motor and ESC fan. Once you start getting into 3S on the Vxl fans are mandatory unless you just upgrade to a castle system

[@IROC-RC]

If you plan to keep it trash the electronics and the slipper clutch. Get the Center differential from the Traxxas Hoss and put 1 million weight oil and you'll love the truck!

[@AVERAGEJOERC]

I called it i. Your tomley 2 channel.. motor gets super hot.. ill repeat myself a lil bit for yall.. i took a pull off system out of a kraton 6s.. popped it in the vxl rally and ran it in 4s and solved the motor overheating issue.. only thing is i had mount the esc way forward with a homemade esc plate.. works perfectly now

[@shanefetterolf6707]

As usual, seems Traxxas should add a few more asterisks to their claims

[@maszkalman3676]

@taterbot2006 Yeah my arrma cooked it's esc in a week it was an arrma infraction mega so not evne the top end version so it wasn't overpowered....

[@IISG93II]

​@taterbot2006 I agree, as a fan of Arrma vehicles. For example, their latest Kraton 6S EXB "Extreme Bash" is so fragile. Diff cups, drive shafts, arms, all pretty common weak points. Doesn't even take a hard bashing to break. Durability is superior in Traxxas vehicles generally. I had a Maxx 4S and that thing, while it had its issues, was near indestructable. I really dislike Traxxas as a company though, and I sold all my Traxxas vehicles except my XRT.

[@bluezhawg2104]

My MJX 14301 has fans and a gyro for under 200 dollars. It’s a hoot and at that price point I can afford three MJX models.

[@OmniMan_Racing]

They are fast after you change the electronics out 🤣 i managed 127mph on 6s, stock body, stock plastic cvd's. 133 on 8s but that run was cut short with a epic crash

[@OmniMan_Racing]

@@younggrasshopper-apprentice broken parts here and there but it's been rebuilt and turned down into a street basher. I have video of it on my channel just have to go back about 10 months

[@alantaylor353]

The Maverick Quantum RX costs £224...keep that in mind.! 😉 😉 It's also got a Hobbywing max 10, 120 amp, 4S ESC, a 3674, 2200kv motor, runs mod 1 gearing, has a centre diff, has belted tyres that last for ages, will do almost 50 stock & 60 mph when you gear it up & stays nice & cool due to having a nice alloy heatsink.!! They drive fantastically, they're very durable & the bodies aren't as weak as some say. Mines around 8 months old, I've used it often, I've driven it hard, in all weather, on all surfaces & apart from needing the pillow ball hubs/knuckles/blocks? replaced due to being worn & a couple of small cracks in the body where the front wheel arches meet the body, it's still all original.!!! Amazingly enough I'M STILL ON THE ORIGINAL TYRES.!!! That's unheard of unless it's a crawler or an MT, I usually go through a set of tyres within a week or two, especially on road style tyres... I'm EXTREMELY impressed with them, so much so I've started using them on my other 1/8, 6S cars & they're doing a great job too.!! It also won't make you sick when you look at it.! 😉 😁 Like I say, keep that in mind when you're buying your next RC rally car.!

[@STDriver92]

Fun Fact, the LCG slash chassis originated on the Traxxas Rally when it first came out with a generic body years ago. People started doing conversions and a few months after traxxas released the LCG slash 4x4

[@RonaldVCg]

Bought the 2s fiesta and threw the 3s system in there I had laying around. Yes you do need to add fans on motor and esc it keeps it cool. I duct taped the wheels to make it the ultimate drift and power slide rc. I don’t strain the drive train that way, long run time on a 5400mah and endless smiles on my face every time. You should really try taping those tires up, loads of fun! :-)

[@MatthewJorgensen1968]

I have the original Rally that came out when they were wider. I absolutely love that car... Bashes and speed all in one. It handles so good on dirt... And drifts so well...

[@dylanwhite6539]

Personally I think traxxas should make a “pro controller” that mimics the Dx6c or something

[@shad0wscalek431]

I agree that a simple body in ford’s “performance blue” color would look really nice

[@Pablo668]

Good review Phil. Yeah that motor is a worry. I was wondering if that guard on the back of the motor was rubbing the driveshaft, but looking through the vid that doesn't seem to be the case. The driveshaft would likely have a wear mark if that does happen. I dunno, maybe check the driveline so see if it is moving freely.

[@TomleyRC]

I don’t think anything was rubbing. I guess the slipper was not as tight as it should be, and my ‘over enthusiastic’ launching just was a little too much 😅

[@chadpennington4594]

Differential kit, center (complete) (aluminum carrier) Replace your Traxxas vehicle’s stock slipper clutch with this Pro-Built high-performance center differential. The center differential absorbs driveline shocks to improve durability and distributes power to all four wheels for mind-bending acceleration. The finned aluminum housing helps dissipate heat with a tough 54-tooth, 32-pitch steel spur gear for maximum durability. The sealed differential comes completely assembled and pre-loaded with thick 1 million weight silicone oil to help prevent unloading and ballooning of the front tires. Center differential requires 32-pitch pinion gear. Looks like you can get rid of the slipper clutch too!

[@CANNINGRC]

Tomley, you know you love traxxas 🎉🎉

[@iannickerson2272]

Arrma may not "offer" a Rally car, however, you can make one easily. I started with my LWB Granite. Vendetta F/R bumpers and arms with sway bars. SCT wheels on 17mm hubs A Tourag body. It is killer, I recommend every Arrma owner make one.

[@TomleyRC]

oh... sounds pretty awesome! Might have too try it

[@willanderson5088]

Traxxas is where I got my start and they do make some cool stuff but definitely time to refresh their body liveries and maybe try to knock a few buck off. Way way over priced when KZbin is a far better option then their customer support

[@Clavitz1]

It's like they are becoming the Activision of RC cars. Barely change/upgrade a thing and then do a release or new creation.

[@nj2033]

The Rustler and Slash have the same heat issue where the center driveshaft meets the rear diff... Commonly melts the plastic.

[@rotten2209]

Tekno axles are $20-30...

[@scottdashnaw2345]

I don’t know anything about other brands. But the traxxas stuff absolutely needs fans.

[@PedalandTrek]

This pinion issue has been brought up many times over the last 20 years or so. It's made of unobtainium and Traxxas don't even have them.

[@hennysu6351]

good old traxxas and their electronics. be careful with those plastic drive shafts. They are going to break after a few packs on 3S.

[@speedboostr]

Traxxas are scammers with propriety batteries connection and the id battery which will only charge with traxxas charger neither of which are supplied when buying into the scam.

[@griffonwings5177]

Traxxas need to get their 💩 together. A) CHANGE PLUG SYSTEM ( annoying) B) LIVERY REDESIGNED ( c’mon ) C) NEW TRANSMITTER NEED IT

[@chickenfist1554]

RC selling points always make me laugh, especially Traxxass's. Taking the most simple things and making them sound fancy. Comes with: TSM - Tentative Stupidity Management Cast aluminium 'wet' drivetrain lubricated with filtered gypsy tears New 'Incendiary' TM propulsion system featuring built in egg frying capabilities x4 Petroleum infused rubber gripping devices for maximum spin Ergonomic handheld vehicle control system with built in wankonometry Limited edition body designed by the pupils at Rushden Blind school 😂😂

[@joedipietro2559]

It's probably the best yet from Traxxas 🤣🤣🤣 yeah they love all the fancy Nancy writing on the packaging and all the hyped up commercialism. Advertising in other words . I'm actually surprised though that the car got up to within 1 mile of it's claimed top end. And the servo actually didn't fail during the filming of this video. This has got to be a first for Traxxas. Maybe they were listening to what everybody has been saying? I'm actually impressed though. It's got potential and let's face it, who doesn't modify their RC cars with aftermarket parts? The easiest way is to keep the Traxxas plugs but solder in a different servi to the plug lead unless you want to spend big dollars to just replace all the Traxxas electrics. Not bad though 👌

[@PeasantNo.471]

😂gipsy tears lubricaton

[@3girlrumba3]

THAT IS VERY CREATIVE AND FUNNY

[@MatrixRC]

Love the Traxxas Rally. Will be getting a couple of these with pro graphix body’s. Add this to my limited edition Valentino Rossi. I live around a 16T pinion but it’s the motor. I have 3 of the Vxl motors and all geared the same and 1 out of the 3 gets hot for some strange reason. I don’t think Traxxas would admit it’s a faulty motor but they do have a good warranty if you can identify the issue very quickly. I’m glad they revamped it. And I’m going to find out if I could fit XO-1 version 2 high velocity drive shafts on this Rally like I did for its previous versions. Because so far I’m unstoppable in the races against ARRMA road vehicles in the neighborhood races.😮

[@OGRCFanatic]

That thing is awesome. I love traxxas, Arrma, Losi, etc, they all have awesome RC’s. But I agree that if traxxas is gonna charge us premium prices for their cars, at least add heat sinks and cooling fans. They’re cheap as heck to buy. So why not just factory install them?

[@rotten2209]

Because they're "cheap as heck"...

[@stevenmilsom1]

Love the close-up watch reveal. ⌚️

[@TomleyRC]

😇

[@chrisvda7277]

And add the optional centre diff lol They should come with fans for the electronics. Your looking at £60ish ontop. And £60ish for centre diff seems a bit high too.

[@TomleyRC]

Yeah.. it all adds up!

[@RoostedFilms]

"New heavy duty" just means new updated but said in a much more trqxxas way. Everything comes HD now 😂 now let's go smash that 60 mph 🙄

[@TomleyRC]

Haha.. yeah, i’m trying to be fair 😅

[@alantaylor353]

I'll never pass up an opportunity to mention how my Slash Raptor 2wd broke a rear driveshaft on only it's SECOND lipo.!!! The "Extreme Heavy Duty" ones cost me £12 EACH.!!! That was £28 after P&P.!! Still, it's turned out to be one of my favorite RCs, I've had it for a couple of years, I've had all sorts of different bodies & motors in it.. It's proven to be actually very durable since it crapped the bed on its first day.!😉

[@tvon4966]

@@alantaylor353Mip x duty on my rustler about 5 years ago never ever looked back once

[@rcmarylandmillz8390]

​​@alantaylor353 I hit 94 mph with the Heavy duty kit with the traxxas hoss I had them upgrades since they came out mine never broke yet

[@rcmarylandmillz8390]

Naw I put them to the test bashing in at 94 mph speed they are Heavy duty 2 years no problems

[@runklestiltskin_2407]

This thing looks cheaper than the Chinese stuff. The electronics, the blue plastics they look really cheap.

[@TomleyRC]

Yeah, agree

[@lafayettehighball106]

Have you ever owned a traxxas?

[@loganfritzsche8439]

Traxxas stuff is arguably more durable than an arrma. Traxxas chassis don't bend. And not to mention their parts are a hell of a lot cheaper than arrma. And, in all of my years of owning rc cars, I have never had a traxxas part break other than the body on an ancient rustler, which was inevitable.

[@19coyote5oh9]

@@runklestiltskin_2407 Traxxas is really overpriced old tech and looks cheap as hell!

[@rcmaniacandmore.8292]

Never judge a book by the cover

[@WowoodogPlays]

My slash also has a problem with an overheating motor, it actually smoldered some leaved that got court under the motor at one point 😕😕

[@Xjeepguy]

I just got one of these yesterday. I love running it, but I did notice it got pretty hot. Fans should be standard for the motor and ESC at that price.

[@mikehansen9898]

Love the Rally. Ive owned a few now. A couple things, swap the slipper for a Hoss center diff. Get rid of the power plant. Its abhorrently inadequate. They use that same system in a 1/10 touring car.

[@thatguysjdm9416]

A linear power band allows smooth support for rally obstacles. Also you won’t spin out of control for trying to reach top speed

[@mattster197]

It is the LCG Slash Chassis. I have it and was just thinking that looks identical. My Slash is a beast! JConcepts makes a great replacement honeycomb motor mount and fan combination that is stellar for the VXL. Really helps with keeping her cool.

[@AmpRC]

My first mod was replacing the battery hold down with the Traxxas tall version, which will work for small or tall lipos. It should be standard equipment

[@notsmirkis]

driving on the high speed pinion is like riding your bike in the highest speed gear all the time. its fast when you are moving but slow to get up there and takes a lot of energy at lower speeds.

[@dstjamesrc6395]

Love the Rally and how it drives. They really should include fans for the motor and esc at the price point imo.

[@rc-dom-uk]

good review. it’s a shame traxxas couldn’t have thought of a new livery , especially as they do such a nice job on the trx 4 .

[@jakejager]

The one thing Traxxas has going for it is their stuff is generally known for being super tough. My Xmaxx is absolutely tougher than any of my other RC's and the majority of my stuff is Aarma. As far as the heat there are aftermarket heat syncs that you can slap on the motor and I'd tighten the slipper a bit more as you increase the gear ratio...on top of installing a heat syncs, you can get one with a fan for less than. $10 on Amazon. I had the same issue with my Aarma Senton and Kraton out of the box when I geared them up

[@kevincain6843]

I bought the cheaper BL-2. I will upgrade the electronics. Too many people complain the vxl about running hot. The Maxx Slash is one of the toughest cars out there but have seen too many bad ESC right out of the box or shortly after.

[@TrashCanNinja87]

You should also get the metal bearing adapter for the slipper clutch which should also come with the car.

[@TrinityDestroyer]

I have a trx6. That things been through quite a bit in the year and a half I’ve owned it. It’s certainly had its fair share of driving in water. I’ve never performed any maintenance on the car, and only clean it occasionally. The car is still rock solid, and the only thing I’ve ever had break on it has been some cracks in the body shell. Traxxas sure has me sold.

[@MrGoldmember2]

“Uh, that doesn’t look like 60 mile an hour” sent me 😂 Good to see pointy back but free my homie Alan!

[@RickMicallef]

Traxxas could have equipped a heatsink and a fan from factory on a €600 car. It only puts them down €3...

[@SteadfastRC]

all of these new 3s rigs need a fan, all of my arrma 3s rigs are super hot after bashing with no fan, its not just traxxas.

[@Martin91swe]

You should probably get the aluminium bearing adapter as well (parts number 6893x, yet another part that you think they would have included from the begining...) for it if you want to keep running on 3s. Plastic one will soon be melted.

[@gumisiek1993]

i never knew how much tight the clutch. last time it got so slippery that it melted bearings somehaw. so i changed damaged bearings and tighten it all the way down :P

[@scottdashnaw2345]

She gets spicy with the speed gear ..we’re happy with the stock gearing on the slash ultimate.. in the dirt it’s fast enough 😁👍🏻

[@django2467]

At that price point, it should have adjustable coilover shocks and a center diff Just more reasoning for me to never support traxxas Time for the hobbywing 10blg2 combo and a center diff 😅

[@TomleyRC]

Yes, it’s certainly not great value for money. I’m trying to be a little less angry with my Traxxas videos haha

[@RC_guy667]

i mean i put the .8 spur slipper setup with a 23 pinion on my brushed and that thing flys on 2s, keep temps in check of course. i enjoy it. i have the travis pastrana snap on edition

[@popuptoaster]

Might be useful to get hold of a FLIR set up for reporting on heat issues, they can be quite pricey but you might be able to pick up a second hand Cat or Blackview phone that has IR for a decent price (Probably other work phone makes that have models with infra red but those the two makes I've had phones from so i know they work)

[@rcinhand9671]

I bought a Velenion in 2008 that I have in my Heavy Metal Sand Viper, and it doesn't get too hot. Then again, I only have a 19 tooth on the stock spur.

[@maxeriousbrooks9807]

Absolutely love mine but i bought it as a roller stuffed hobbywing esc and a 3670 2750kv motor on 4s absolutely RIPS no heat issues and surprisingly the diffs are holding up fine but it does struggle to put the power down on those tires love it thou handles so well

[@SubZ3ro907]

I upgraded my infraction to 8s and I put my infractions stock 6s setup in mine. LoL, I Geared it 24/50 on 32P gears...the thing is mental.

[@erikd6124]

Coolest running rc car Ive got is a slash 2wd with a kyosho brushless sytem from their 1:9 buggy. 2400kv. Its like a 42mm motorn I bröove. I run it on 2s and the top speed is quite low. 3s works greeat too. Low kv, low RPM and a large motor is a good starting ground for low temps.

[@KamachoMan09]

I got the Rustler Ultimate and that didn't come with fans, even for being the ultimate edition.. anyway I had the same heat issue. But when I installed a fan on the ESC and another fan on the motor with heat sync, I ran it endlessly on high speeds and motor stayed just warm for touch.

[@thousandtreesartstud]

the more you crank up the stability management, the more the car works to keep itself straight, so the slower you'll go top-end. take all the slop out of the steering you can, turn the stability off, keep your right hand steady. you'll hit 60. i did. it's a pain and it's rare, but it can happen.

[@Hannsom7]

man i really like this one!! im so glad you can look around it being a traxxas and give credit where credit is due!!!

[@mikellewis2346]

The vxl motor can handle really high temps. But a good heat sink an fan setup is needed for 3s wide open fun. The esc will also need a fan on it for 3s bashing. Besides that its a great system for what it is.

[@wolverine350r]

I also recently found the VXL3S is not really a 3s capable system in my Slash 4x4. I was running it around our new local dirt track, and it cut power after about 4 laps. Stock gearing and no way it could make it through a race. 😒 Have yet to see if it did permanent damage.

[@bllarz3621]

Well, it can go 60 out of the box but it overheats within 5 minutes, had to swap my 19t gear for a 15t just to drive it for more then 10 min.

[@mozambique32762]

i have the same plastic gear servo in my slash when i bought it 6 years ago never had a problem so I never thought about a new one

[@rasheedjohnson9361]

I totally get where your coming from on this car even the body slows it down I swapped to hoons a center diff and added fans for esc and motor it's it probably the most fun and easy car to drive

[@mikehansen9898]

I've learned more lessons the hard way because of Traxxas electronics than I care to admit.

[@basementracer]

I demand Pete and Rubber chickens join forces in all video's MR Tomley Sir! They are your crew!

[@rctraildriversuk-lone-wolfvide]

Very tempted with a T shirt, good video dude, totally agree about the huge TX its high time for a change, im sort of looking for a nice rally car but wont be this one

[@NathanStorer-RC]

I think the Traxxas fan is only for the ESC, and it doesn't work too well. Going to have to get an aftermarket fan for it. I have the 4wd Rustler, and running it on 3s gets it sizzling hot on stock gearing.

[@TheDudeRc]

I dont think its a bad car just a bit expensive. Well, a lot expensive. I bought one when they first came out again .... not sure why though. LOL Did get 60 MPH out of it with the optional gears. Did a whole lot of races of it VS the CEN Puma M and they are pretty close. The Snap-On versions body was SO much nicer. Wish they would have given it that body for the price.

[@michelebonomo6901]

Hi Tomley! I understand that after replacing the pinion, something got damaged, or am I wrong?

[@traviswilliams3209]

mine had a castle 3800 and a 17t with a robisnon spur and the bigger motor plate(for the bigger bearing), it also handled really nice with the soft sway bars in back and medium in front

[@joshfowler197]

I have the original rally in the Snap On edition. The slipper is an odd design and not the same as the slash. Mine is now a 6s street speed machine. Not much is original anymore. One of my few non crawler cars

[@TomleyRC]

Sounds like a beast!

[@mustangguy3706]

One of my favorite RC's other then the overheating it's a solid car.

[@edwardstaskowski2898]

I have same pointer but blue. Seen it at dollar tree and had to get it cuz of yours. Anytime I explain something rc to a friend in video I use it. Love your videos.

[@StewartChambers]

nice Cleetus t-shirt chap!

[@TomleyRC]

Hell yeah Brother 😎🤟

[@sargev55]

I run a good esc and twin motor fans on mine. I basically run a slash ultimate converted into a sort of back slash and do very well in open 1/10 classes. I run 2s though because thats our limit for 1/10 classes but I do run the high speed gearing and the esc and motor must have cooling or it will thermal. As far as the slipper clutch goes on the 3s vxl line I always go all the way tight, and 1/4 turn back off.

[@wheelsdownrc6348]

It’s crazy how long it takes TRAXXAS to get that far but the funny part is that’s how we feel trying to get bang good parts…

[@myharryface]

On all my VXL and Ultimate Traxxas cars I buy the very inexpensive ESC fan and the motor heat sync. And I can literally drive them for hours, across multiple battery packs across multiple years (3 so far) without issue. Haven’t lost a motor yet.

[@BeardRubEnjoyer]

Gonna go out on a limb here and guess that you don't live in the Mojave.

[@myharryface]

@@BeardRubEnjoyer No, but I do drive it hard on 100 degree days ... like this whole week for example.