No roof means less stiff but it also means you can easily hop over the door. Weld 'em up. Super stiff. Job done lmao
@daycrew Жыл бұрын
Australian police would arrest me on sight if they saw that haha
@burgerbait Жыл бұрын
@@daycrew 😂 Yeah I have heard they are pretty strict there.
@mastercricket7626 Жыл бұрын
lmfao hellz yeah y not #RaceCarStreetCar 😂
@AriKolbeinsson Жыл бұрын
I got similar blocks. Shocked at how much it reduced rattles. Tests suggest that it doesn't actually add much stiffness, but the mental effect of it sounding and feeling stiffer should not be underestimated. The stiff blocks just make the car nicer, especially as the old rubber ones are completely knackered after 20 to 30 years
@nolahahnshouse3389 Жыл бұрын
A good set of coil overs, front and rear sways & adjustable end links and optional a front upper shock tower brace and new tires will drastically improve the overall handling of your Miata..Trust me!
@hankrogacki8356 Жыл бұрын
Fact
@Tomas_Burgess Жыл бұрын
BANNING VIDEO - LOVING THE SET UP
@fiisho Жыл бұрын
Just got recommended your video on my main page. For a small channel, especially one of the few aussie channels out there I have to say your production quality and content is amazing. Later this year I'm purchasing a ST165 GT-Four Celica, and this has got me wanting to start a channel of sorts documenting the restoration. PS, I'm from Sydney!
@daycrew Жыл бұрын
Thank you! That is an awesome car, a restoration series would be really cool to see. One of our crew has a 7th gen celica with a trd bodykit, its in the shop right now, but expect some videos on that one day!
@fiisho Жыл бұрын
@@daycrew Might be asking for some tips off you then, we'll see :)
@mastercricket7626 Жыл бұрын
this is one mod i have been debating on for a year or so now and all i see is good so to that my brotha i think you finally sold me on some new Delran door bushing's / stabilizers... peace and love yal keep it rad stay safe and build on ... l8z
@TheGermanXWig Жыл бұрын
You can 3d print the door bushings. I had some printed at work in carbon fiber. Basically had the same outcome as you. Not really any noticeable stiffness but the rattles went away and my doors shut much easier now.
@daycrew Жыл бұрын
Carbon fibre would be pretty cool. Jealous you can 3D print stuff like that!
@skylinefx049 Жыл бұрын
Do you have the files?
@TristanTris321GoT Жыл бұрын
Older Miatas for rattles makes sense but for performance I think nonsense. Slurpy cheers
@mostlyuselessgarage Жыл бұрын
Great vid, short and sweet ... Keep it up the Miata content! And the bubble tea reference 👍
@ZBinxsy9 күн бұрын
The 20$ solid ones on Amazon work probably 90% as good. Also you can spend the money you saved on say a dynamat kit and get rid of that rattle from your car. Doing just the doors, back deck, trunk and just the transmission tunnel and half of the floor pans under the seat does wonders.
@daycrew9 күн бұрын
Not a bad idea!
@miked5789 Жыл бұрын
Agreed.... Have the OG Kenauto door blocks. Reduced rattles & chassis noise.
@doug5uk Жыл бұрын
Tried these on my Mk3.5 Sport Tech. Only difference was I had to slam the doors to get them to shut properly. Threw them away and went back to standard ones.
@daycrew Жыл бұрын
Interesting!
@ZBinxsy9 күн бұрын
You installed them wrong, you have to leave them slightly loose, shut the door and then tighten them down. My doors did that too at first.
@miguelcrisol3273 Жыл бұрын
Make any difference for nd miata? Modern chasis and development
@daycrew Жыл бұрын
I have heard they can make a difference in the ND aswell, but I don't have one to try for myself!
@JakeG59 Жыл бұрын
i have mazdaspeed ones, door stopped rattling but i have to really give it a firm close to get it to turn off the light inside. Not slam it but just a solid close
@daycrew Жыл бұрын
Interesting. Atleast the doors stopped rattling!
@Helios1733 Жыл бұрын
I do a lot trackways and took advantage of this "little" mod. Let me tell you: it works 👌👍
@YpaaaaCCCP Жыл бұрын
it has much easier and cheaper way. just put 17mm hex nut inside genuine bushing holes. and you can solve with it.
@daycrew Жыл бұрын
Interesting, sounds like a good tip!
@CosmicSeeker69 Жыл бұрын
SNAKE OIL and psychology
@lilmike2710 Жыл бұрын
Your steering wheel is on the wrong side.
@hudboys8120 Жыл бұрын
Nah, it’s a Japanese Eunos roadster
@merlyn2121 Жыл бұрын
$115!!!! We get them here for $25
@lCreepersRevengel Жыл бұрын
The car was red??????? Damn, the guy ripped you off by painting over it.
@daycrew Жыл бұрын
I know right...
@bronteb.7814 Жыл бұрын
Guilty of being one of ur passengers who slams the door 😔🤚
@Brenton656 Жыл бұрын
I have bushes, made no difference, car on 4 jack stands is as stiff as you would need and rocks on the stands before and after. Sure it will assist but it's in no way a game changer, spuds will tell you it's a game changer but it's optimistic at best
@Master-Roshi Жыл бұрын
Found some for 30$CAD on aliexpress (ain't got them yet)
@daycrew Жыл бұрын
Let us know how they are when you get them!
@davidstorm4015 Жыл бұрын
These things may be a good product, but $100+ is a ridiculous price for two pieces of polyurethane
@demon1954 Жыл бұрын
3% improvement in stiffness if nothing else has been done.
@daycrew Жыл бұрын
That sounds about right, not anything major
@JAYJAYJAY532 ай бұрын
Mine are sitting in a box of failed and used parts . Trash . In defense of the product I only used a week and my car only 20k on it . Your money would be better spend on a new set of OEM bumpers. You just had worn out bumpers to start with.