Is up 98% Infrared Heat Rejection really that much better than up to 88%? Xpel XR Plus Super Ceramic 30% Window Film versus XR Ceramic 30 & CS Dyed 30 at Tint Man Window Tinting inc. TintManFL.com #TintManFL #Xpel #VampireTint
Пікірлер: 43
@BLacknesmonstaz3 жыл бұрын
Now to find a shop that actually puts on what you pay for.
@yuolo99792 жыл бұрын
So at one of my local shops here, I've always wondered why they charged double the price from the Prime XR vs XR Plus and gotta say, for approx a 10% improvement, it seems well worth the money!
@vladimirnyk Жыл бұрын
At first glance 98% seems only 10% better than 88%. But the max you can get is 100% which means the surface enveloped in that film won't absorb any heat through radiation. The effectiveness of 98% IR heat rejection is x6 times higher than that of 88%. Look at the problem from the perspective of how much does it absorb instead of how much it reflects. One absorbs 12%, the other only 2%. Similarly, 99% is twice as better than 98%
@joshuamartinez95364 жыл бұрын
That was perfect exactly what I was looking for. Thank you for your time and knowledge.
@airbomb342 жыл бұрын
Legit. Paid the extra for this after a demo in the showroom. You could feel a huge difference in heat through the two.
@howtodothings84152 жыл бұрын
I had my car tinted in the longwood location back in 2016. Its still holding up strong. I ONLY recommend Tint Man!!!
@bigdaddy4u2njoy Жыл бұрын
I just got quoted 800 for xr and 1000 for xr+ in Boston area. This includes windshield, pano roof, all sides and rear.
@andrewhua49724 жыл бұрын
The heat lamp is IR based right? Do you still see the same difference in real world use since the 35 film has the same TSER?
@Hakuna_My_Tatas3 жыл бұрын
Could you do this same test, but in a car with the XR plus using that same heat-sheet?
@abdullahal-shimri30912 жыл бұрын
Why didn’t I see this video before I had Prime XR installed? Should have gone with the Plus. Oh well …
@JoeRussellProductions3 жыл бұрын
Interesting. I would think that the heat must be going somewhere, so is it possibly heating up the exterior glass a lot more? If so, I wonder if folks that have the super ceramic will have more instances of windows cracking?
@tintmanfl3 жыл бұрын
Yes, you are exactly right. This is why we can't put this on residential and commercial windows because they usually have plate glass. It's only safe on tempered glass.
@mrmcclear3 жыл бұрын
Thanks for the reply. So are you saying that it is possible for car windows to crack in the high heat with the super ceramic? Is it not as safe? I have a Tesla model 3. I'm concerned about the large back window.
@tintmanfl3 жыл бұрын
@@mrmcclear we've done dozens of model 3 full one piece rear windows for years now with XR Plus and haven't had any problems.
@KotYaruch9 ай бұрын
What's the difference between Xpel XR black 70 and XR blue 70?
@Bimmer_Bill Жыл бұрын
That big of difference?
@Alisters_Adventures5 ай бұрын
The truth is that every car interior is going to get super hot after sitting in the sun regardless of what tint film you put on the windows, the better film just delays it a little longer.
@ModzHome2 ай бұрын
A/C efficiency and insulates better.
@madoasfulАй бұрын
Only if you leave the vehicle parked without air it will heat up, but the tinted glass helps a lot to keep the cold inside the vehicle, in addition to mine on the entire roof I put a THERMOLON sheet (I'm from Colombia, I don't know what this sheet is called in other countries) it is 10mm, one side is foam and the other side is an aluminum sheet, The sun can hit the roof of the car very hard and it will feel cool, plus the air conditioning is very comforting, your vehicle will be a refrigerator
@samdequina33862 жыл бұрын
You did 30 percent across the board. Is there a difference if you were to do 30 percent with XR compared to 15 percent XR would it withstand heat and reject I guess “better”?
@peytoncastillo996910 ай бұрын
Yes, shade matters
@sewaflores15473 жыл бұрын
What happen to your vampire tint wasnt that 96%
@TheSkepticSkwerl2 ай бұрын
They sell 96% and 78% not sure where youre getting 88
@tintmanfl2 ай бұрын
Xpel XR Plus Multilayer Ceramic averages 97% Infrared Heat Rejection. XR Plus 5% is 98%. Xpel XR Black Ceramic averages 85%. XR Black Ceramic 70% is 89%. All specs can be found at Xpel.com Thanks
@Icharis3 жыл бұрын
doesnt make sense that a 10% change makes that much of a difference...
@ohplezz2 жыл бұрын
Seems like a scam.
@lathamhardee2 жыл бұрын
@@ohplezz You're thinking about it wrong. its not a 10% increase in efficacy. the 88% is letting 12% of the heat through, and the 98% is only letting 2% through. Those numbers are (10) apart, but the gains don't rise linearly with the percentage. I hope this helps.
@laobe51192 жыл бұрын
Use ir meter, you need to add 70% irr film to 88% irr film to get 98% irr..
@getoffamylan6844 Жыл бұрын
@@lathamhardee Exactly, the numbers can be weird. 2% milk has TWICE the fat of 1% milk, even though the difference is just 1%.
@wdiv4 жыл бұрын
So I just got XR today thanks to the price difference. $180 for no ceramic. $300 for XR. $650 for XR plus 😳
@tintmanfl4 жыл бұрын
Just curious what city you're in. Here in Orlando most sedans are $175 CS, $290 XR & $500 XR Plus. This is for sides and rear window. XR is our most popular film. At up to 88% IR rejection it out performs most of our competitors best films and at a better price.
@wdiv4 жыл бұрын
Tint Man Window Tinting Longwood DC metro area. And these are prices for my two door lol.
@hemiedup55013 жыл бұрын
Come out to waldorf md to vega motor sports and get xr plus for rear window rear sides and front side for $500
@Phillipsonfire1232 жыл бұрын
@@tintmanfl dam I just paid $960 for xr plus 😩
@ben_diedrich2 жыл бұрын
Hello Wally. I also just got XR today. Good to know that while we may have contrasting whisky preferences, we happen to agree on ceramic film.